Database Develop

[MAJOR PROBLEM] no more... :) Pls close or delete :)

Hi guys,
I think I possibly screwed up my wounderful sgs i9000 european edition
First of all I have to tell you how I came to this...
A long long time ago, today afternoon 17 o'clock european time I wanted to test the great CM7 and so I did, of course first I failed to flash it but then it worked. The phone worked fine but there came the point when I wanted to use samsung's firmware again, cause it has the apps I love.
So I just connected my phone with Odin and tried to flash a original Firmware, I think it was JS7. It worked, but then my phone didnt boot after the flash.
So I managed to make the phone boot into download mode, what is the only thing that works at the moment.
So I connected it again and tried to flash my phone one more time but then it didnt work
Odin stuck at the line "set pit-file" or somethin like that.
Well. What could I do? Reconnect and try to reflash and it doesnt work again
Do you know, guys, what I could do? I need my phone every day but atm it cant be flashed
Now I tried to reflash it again and I stuck at the line "SetupConnection.."
Maybe I should try to flash another kernel and try to flash a custom rom trough CWM? Maybe that would be the key for me?
My phone stuck at "SetupConnection.." since 10 minutes or so
PLS help me
best regards,
alex

is recovery mode working ?? if so do a full factory reset.
Get your self a firmware with all 3 files and PIT. something old like JM8 or even back to eclair.. This should contain the dbdata which ive had trouble with in the past.
When you have all that, connect your phone to odin and try again, Make sure kies IS NOT running (even in the icon tray) and make sure your drivers are upto date.
If download mode works, your phone will survive. As for Odin sticking on 'Setup Connection' That's something to do with the phone connecting to the PC.. Maybe try another USB port, or like mentioned previously, Kies running or out of date drivers ????
Anyway try the above steps. and post back your results.
Oh dont forget to make sure RE-PARTITION is CHECKED when your using Odin.

well, thank you very much for the useful information
at first I tried to flash my phone at my laptop, then on a pc, but it just didnt work
but now I 'm succefully flashing it again trough my laptop and hopefully it will work again
And yeah, DL Mode works fine, but nothing other
Well, seems to be that my phone just was flashed succefully
Damn, I was so scared that I have to return the phone to the reseller
Wonderful, it boots again
I wont take it easy as before with the flashing.
Sorry for the trouble created by me
And thanks again
gn8 (from my time zone) and best regards
alex
closed

[Q] how to remove clockword mod recovery

Hi all
This problem that I have is pissing me off so much. I rooted my phone and then unrooted it, and then my Android Market icon was missing. Now, whenever I want to do a factory reset, the phone goes back to ClockworkMod Recovery every single time. I want to get rid of this CMR. Also, I've tried to stock original rom on my phone but it does not work at all. What is happening? My phone is LG Optimus 2x P990. But I always get this error where I can't apply the DLL file. This really annoying me right now. I've tried everything and NOTHING works. I regret rooting my device.
Please help me thanksss
Lena

Here's howto remove the ClockWork Recovery Mode:
http://forum.xda-developers.com/showthread.php?t=1021554
You can flash the original image using SmartFlash.
Get your original Firmware image from here. The instructions for SmartFlash are here

how to flash the zip
sorry I am completely new to this. How do I apply the zip? Do I boot into recovery mode and install zip from there? I have done this with other zip files before and it always ended with:
'installation aborted'
im trying it now, but its stuck at:
'Restoring stock recovery image'

smart flash
smart flash doesn't work for me. I always get this time out error.. I really don't know what to do now. The recovery stock file did install but then I chose 'reboot system now' in CWM and it got stuck with the LG logo. Now, it's back to ClockWork Recovery Mod again!! i don't understand. Please help.. Many thnks

what type of error?
your device-manager on your pc recognizes your 2x, when you connect it as described in the instructions?

THis is the error:
00:00.0 Sec ownload Start...
00:07.5 Sec :We can't communicate with specific port
and now, I can't start my phone. It gets stuck on LG logo. I tried the remove CWM method, it worked but when I rebooted my phone, my phone would not start at all. P. Please help.

yep it recognises it but it always gets this time out error... what should I do? Please help.. Many thanxx

Does the COM port get detected automatically when you plugin the phone ?

pinkdiva said:
yep it recognises it but it always gets this time out error... what should I do? Please help.. Many thanxx
Click to expand...
Click to collapse
Same with me. Go on trying at some point it will work. It happens with me everytime i flash with smartflash. Myself also waiting for a definite solution to this problem. i think the problem lies with usb drivers. I also tried with taking out card and sim but cannot pinpoint the problem. Any successful flasher may upload the drivers. Moreover i also disabled programmes like antivirus etc running in background. Waiting for a more definite problemfree flashing solution.

I think, install drivers to smartflash, no other drivers, and later smartflash.
Enviado desde mi Optimus 2X usando Tapatalk

After trying to update phone keeps restarting !

Hello guys !
The problem that I have is that my phone keeps restarting after trying to update to 2.3.5.
The update appeared to be ok but before finishing you just have to select the language and so on.
Well, mine did not managed to reach that... It just keeps restarting and restarting and none of the buttons combinations does work for putting to download mode or reset mode.
I also uploaded a link for the movie, because it has 100mb and could not be uploaded here.
Any ideea guys?

Pull out battery, after a few minutes put it back and try to enter Download mode with 3-button combo (VolDown-Home-Power). Tell me if it works.

THANKS ! It worked, now it is in download mode. What do you suggest me to do? which restore or update is better and bugless?
Thank you again!

Now flash stock JVT with odin, restart, turn off, reboot in Download mode again, and flash a kernel to get CWM. After this, flash the custom rom that you prefer (or stay in stock).

I have made the steps like there, and when I reached the end It did not restart, and this time it is not starting at all and also not answering to any command.

No one can help? The phone also can not enter download mode !

Any one can see me or help me?

buddy do not play wid alll this thing....u perform all tbis by showing some guide.... there are lots of guide avail on xda for flash through odin so u have to follow
Sent from my GT-I9000 using XDA App

Used new JVU

grigorean_alexandru said:
Hello guys !
The problem that I have is that my phone keeps restarting after trying to update to 2.3.5.
The update appeared to be ok but before finishing you just have to select the language and so on.
Well, mine did not managed to reach that... It just keeps restarting and restarting and none of the buttons combinations does work for putting to download mode or reset mode.
I also uploaded a link for the movie, because it has 100mb and could not be uploaded here.
Any ideea guys?
Click to expand...
Click to collapse
Follow the video guide for flashing stock rom
http://www.hdtechvideo.com/?p=54

I could not make it work ! Not even using JIG ! homemade, but a good one - i checkd it.
So, it's back to warranty, hoping they will return it good or another one new.
It was practically dead !

cabessius said:
Now flash stock JVT with odin, restart, turn off, reboot in Download mode again, and flash a kernel to get CWM. After this, flash the custom rom that you prefer (or stay in stock).
Click to expand...
Click to collapse
Thank you! I had been trying to fix this problem all day and nothing worked until I tried this rom!

Hello again guys!
The phone returned from warranty, after 1month and 2 weeks.
It is not working as new, it has a little lag.
I installed Navigon and asphalt and the phone restarted, and entered the restart loop.
I made an update to I9003XXKP9 and i followed all steps but keeps restarting, i updated then to I9003XXKPE but with same problem, and at the end it can not make the hard reset, it turns some errors with red:
"E faild to mount data, no such file or directory."
"E:format_volume: rfs format faild on /dev/block/mmcblk0p3"
"Data wipe failed"
Any ideea?

Problem solved, 2nd time, by replacing mainboard. Thank you all for replying!

lg p970 problem flashing,reset

i messed up my lg with installing ICS,now when i turn on the mob everything is blocked,picture of android is v10 and version inside is v30,i can charge it and i can get in s/w update mode. i tried smartflash but it goes to download complete but mob. wont reboot just turns on lg logo,i tried kdz updater but when i press upgrade start and normally its supposed to ask me which country to choose so i can put different country in my case it goes automaticlly to update. i have teamviewer 8 if maybe someone has time to help me so i dont have to take it to service(no money). thanks

now in lgmobile tool i did phone recovery and after i turn lg on on version it sais v10a and it sais i can start update to gingerbread and when i start on update on 15% it stops,any help?

after error i put manually in s/w update mode and it went all the way,it sais gingerbread installed but cell want reboot and when i turn it on there is no change.

on 90% of update on cell comes lg sign and stayes like that

hey man sorry for the late, I'm a little busy
just a question, when you flash a patched firmware, can you access to the recovery ? if yes, that's all, from there just do a wipe of datas (flash superuser if root is needed) and reboot. done.

no problem its never late, unfortunately not,thats was i am trying to do,i know i need to come to recovery but so far i didnt manage

which firmware did you try ? (give a link if possible)

unfortunately i am at work but i dowloaded v10a from, http://lg-phone-firmware.com/index.php?id_mod=1

these from that site are not patched, but stock...
download this (run to extract binaries) and follow my pdf guide if you have already the upk package
edit : or follow this online guide

ok i will try with this,can you just tell me will i try with kdz updater or with smartflash?

smartflash of course.
kdzu is obsolete since LG has restricted this method (there is a way though, but more complicated)

i have upk ofcourse,i tried so many combinations,maybe i tried even v20s patched but i will give it a go tonight after 10 p.m. when i get home and i will post results,thanks for now Ilko

Ilko this stock v30 recovery,would that maybe help in my case?

If you need a reset, it won't help,because as said before, ICS stock firmwares don't have recovery
From my funky phone

here i am,i tried,download went ok but cell is stuck on lg logo

with vbscript i managed to run r&dtt and change country to diferrent but on 90% always cuts me off,i noticed in device manager that it cuts usb connection,i know that i must put cell on usb debbuging mode but i cant when my cell is completely locked when its turned on,is there any solution for this or we can say i can through it away??

well, I don't know what to say friend. if smartflash fails, other ways will fail too. you may try r&dtt with the shttp tip. I'm afraid this is the last chance

Hmmm, what if he tries to flash a stock ICS? Since SFT tries to reboot in recovery mode, it will wipe data, and maybe will help...
As long as it doesn't drop the usb connection, of course
Sent from my LG-P970 using Tapatalk 2

i used v30b and sft download complete and it turned on lg logo and stays like that,no reboot, with shttp tip i tryed again but it always cuts me out on 90 %, do you guys know if i take it to a special shop for mobile they could reset it with some special cable or something????

when download on smartflash completes usb immediately disconects me and than cell can not reboot,smartflash automaticlly finds a com port,do i need to do something manually with installing drivers or something?????

[Q] How to flash D415 back to stock firmware? No guides work.

My D415 has been out of action for about two or three weeks now and it sucks having no phone. I'd like it back but all the hours I've spent trying to fix it have been pointless due to very poorly-made guides that are either difficult to understand or simply false.
If I follow this guide: http://www.lg-phones.org/how-to-flash-unbrick-lg-l90-back-to-stock.html
It gets stuck forever on step 7, with the computer refusing to recognize that I've connected the phone no matter what I do. Note that this includes skipping download #3 because I already have the stock KDZ downloaded, could this be the issue?
If I follow this guide: http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
It gets stuck forever on step 1, with lg-firmware-rom.com not actually existing.
If I follow other guides, other **** happens, like LG Mobile Support Tool continuously "downloading" the USB driver without the progress bar or anything actually moving.
My computer is getting cluttered with various copies of roms and KDZs and drivers and random pieces of software from all the attempts to do this, I've spent hours trying to get it done, and I'm tired of not having a phone. Could anyone give me a way to do this? The phone is currently on a 5.0.2 ROM with baseband issues and TWERP as its recovery, IIRC. I'm good with computers, though inexperienced with Android tweaking. All I need is a reasonably concise guide that actually works.

Well, the first thing I would do personally is to delete all of the extra files you dont need. It always helps to have a clean work space. Then uninstall all drivers you have installed
.
Download and install the drivers from here: (http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425). Restart your PC and verify all drivers are installed correctly through device manager.
Download this KDZ (http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWB7G2U032NVA6P70FE44UV/D41520b_00.kdz) This is the one I used and it works fine.
You also need LGFlashTool, which is what you run first when you're trying to flash back to stock. (http://www.mediafire.com/download/fwrcd3pdj0svjtb/LG_Flash_Tool_2014.zip)
Close out any programs you aren't using just to make sure there aren't any conflicts.
Reboot into download mode, verify in device manager that your phone is recognized correctly. Run LGFlashTool. Change PhoneMode to EMERGENCY. Click on the little folder icon next to Select KDZ file. Navigate to your KDZ and select. Hit normal flash.
When the next screen pops up, just hit START in the bottom right hand corner.
Another box will come up. Where is says Country, select different country. Language, select English. Hit OK.
The LG Mobile support tool will come up and should start flashing your phone. Chill and let it do it's thing.
IF it happens to say that the phone is disconnected, don't hit anything. Just unplug your phone and reboot it into download mode. Should automatically start flashing.
Hopefully this helps. If you want, I can link you to my collection of files I use.
EDIT: This is essentially the guide from above, I'm just linking you to the files I used more or less. I also realize I'm a bit late lol. Hopefully this either helps, or you have it solved.

My phone keeps saying settings stopped working and google play store stopped working over and over and my computer is not recognizing the device? Any help on this?

Sfvgal said:
My phone keeps saying settings stopped working and google play store stopped working over and over and my computer is not recognizing the device? Any help on this?
Click to expand...
Click to collapse
Backup and factory reset (wipe caches and data)?
If still broken, reflash stock (if you have TWRP then look for a flashable zip, if not kdz is the only way), wiping system partition first.