....... iget this lonly messege PD29100 SS-BC (4K) on the red line of the bootloader screen wich known as halfBick thats cuzed (by mistake ) to update my spl 4.xx to older version
so plzz any ideas 2 solve my prob>
note :
my wp7 is working but icant flash any rom
I'm sorry for you!
Can you try the goldcard methode to flash roms?
As far as I read the phone isn't recognized by the PC properly so flashing via USB cable isn't possible
angle4love said:
....... iget this lonly messege PD29100 SS-BC (4K) on the red line of the bootloader screen wich known as halfBick thats cuzed (by mistake ) to update my spl 4.xx to older version
so plzz any ideas 2 solve my prob>
note :
my wp7 is working but icant flash any rom
Click to expand...
Click to collapse
Did you try to flash your original ROM specified for your device?? I only used my original TMOUS CID .531 ROMS to go back lower bootloader.
I think you must have done soomething wrong, don't get confused when you see on your decive that the firmware is exapmle 2250.21.40502.401(my current one) doesn't mean I have to flash another .401 based CID ROM to lower bootloader, you must ALWAYS use the one specified for your device or else you will end up with the problem you have now or as they say DO NOT RSPL/HSPL your device when on BL 4.xxx it has been warned like a million times already.
I suggest you find someone near you who has your same phone and ask them to restore a backup of his phone and from his computer via zune! A member of an Italian forum has solved that!
first thank u guys for ur helps >>> now iam trying to download the original rom >> and my braother have the same mobile iwill try to restore his backup>>> iwill try
how i can use the golden card ????????????????
---------- Post added at 04:15 PM ---------- Previous post was at 04:09 PM ----------
ginjamaka said:
Did you try to flash your original ROM specified for your device?? I only used my original TMOUS CID .531 ROMS to go back lower bootloader.
I think you must have done soomething wrong, don't get confused when you see on your decive that the firmware is exapmle 2250.21.40502.401(my current one) doesn't mean I have to flash another .401 based CID ROM to lower bootloader, you must ALWAYS use the one specified for your device or else you will end up with the problem you have now or as they say DO NOT RSPL/HSPL your device when on BL 4.xxx it has been warned like a million times already.
Click to expand...
Click to collapse
my firmware= 2250.21.40502.728 how about it
---------- Post added at 04:55 PM ---------- Previous post was at 04:15 PM ----------
1/trying to flash original rom failure
---------- Post added at 05:46 PM ---------- Previous post was at 04:55 PM ----------
2/backup method = X
Can u enter USB host mode?
Press camera+volume down+power on to enter the bootloader in host mode.
If u can. May be gold card method will work.
same BootLoader screen
I don' know exactly but restoring a backup from an other phone via Zune should not work. By the way, did Zune also save SPL & Radio or only OS?
I thoin as long as you do not see Serial or USB at the bottom of you bootloader, the device isnt recodniced by the PC for flashing.
The only methode wich could work is flashing without USB connectein to the PC (Goldcard)
until now I didn't read a post from someone who tried it with a half bricked device, so its only a possibility for you, but the only possibility I can think of.
If you don't know what goldcard means, search the forum.
it's an external connected SD card for flashing via SD (no connection to pc needed)
The last escape of you situation would be to JTAG you device, but I'm not familiar with JTAG so its really the last thing you should test if you do not want to send it back to your local HTC partner.
In this case,when SPL is deleted,pc dnt recognised the phone in bootloader,but backup via Zune is possible in normal standby mode,so the pc can recognised the phone without problems!
sandman01 said:
I don' know exactly but restoring a backup from an other phone via Zune should not work. By the way, did Zune also save SPL & Radio or only OS?
I thoin as long as you do not see Serial or USB at the bottom of you bootloader, the device isnt recodniced by the PC for flashing.
The only methode wich could work is flashing without USB connectein to the PC (Goldcard)
until now I didn't read a post from someone who tried it with a half bricked device, so its only a possibility for you, but the only possibility I can think of.
If you don't know what goldcard means, search the forum.
it's an external connected SD card for flashing via SD (no connection to pc needed)
The last escape of you situation would be to JTAG you device, but I'm not familiar with JTAG so its really the last thing you should test if you do not want to send it back to your local HTC partner.
Click to expand...
Click to collapse
First iwont 2 thank u for ur help ^_^
the backup didnt work , it recodniced with pc on the recovery screen but after few seconds get error and restart the phone backing 2 wp
and on bootLoader screen cant recodniced wuth pc
iwill take ur advices and start with the Golden Card , and will see ...
thank u again
---------- Post added at 11:57 AM ---------- Previous post was at 11:51 AM ----------
geppo1975 said:
In this case,when SPL is deleted,pc dnt recognised the phone in bootloader,but backup via Zune is possible in normal standby mode,so the pc can recognised the phone without problems!
Click to expand...
Click to collapse
yes it recodniced 2 pc but cant complete the backup
thaanx
---------- Post added at 12:03 PM ---------- Previous post was at 11:57 AM ----------
CAn any one help me eith the golden card method ... icant under stand any thing about it .. and what is the Y-cable ???????????
and ihave sd memory 8 Gb replacing it can solve the problem ???
great gold card by xtc clip = X
replacing sd card = X
what imust do else ~_~ guys ???????????
There is no fix for half bricked bootloader.
Sent from my HD7 T9292 using Board Express
you have find a jtag device...
There is no another way...
I'm in same trouble
Wow,
if I press "volume Down" and switch on the device, it doesn't start to the bootloader. It's just a plain startup.
Do I have half-bricked too, or what is my problem?
I get this since the downgrade to a pre-Mango-Radio exited with an error.
medri said:
Wow,
if I press "volume Down" and switch on the device, it doesn't start to the bootloader. It's just a plain startup.
Do I have half-bricked too, or what is my problem?
I get this since the downgrade to a pre-Mango-Radio exited with an error.
Click to expand...
Click to collapse
People I've made it!!
"HALF bricked" True times ...
I have an HD7, and yes I had no boot loader more ...
My WP7.5 Mango has even worked ...
Have performed the unlock of ChevronWP7 Labs.com [leads,
then I've done with a backup (Windows Mobile 7 BackupV1.6)
and then by draufgespielt (WP7 Update Cab sender) firmware (schubert_2250.21.50001.728)!
And then I have my HD and started in Boadloader un behold
My Boadloader is back! HURRAY
Is indeed not at all .... How COOL!
^^ let me get it straight the chevron wp7 labs fixed your bootloader????
Adam-dz said:
People I've made it!!
"HALF bricked" True times ...
I have an HD7, and yes I had no boot loader more ...
My WP7.5 Mango has even worked ...
Have performed the unlock of ChevronWP7 Labs.com [leads,
then I've done with a backup (Windows Mobile 7 BackupV1.6)
and then by draufgespielt (WP7 Update Cab station) firmware (schubert_2250.21.50001.728)!
And then I have my HD and started in Boadloader un behold
My Boadloader is back! HURRAY
Is indeed not at all .... How COOL!
Click to expand...
Click to collapse
can you tell us steps with details
If you could write us a step by step that would be fantastic!!! =-D
SPL only semi-fixed
Are you sure it's fixed? Because when I updated to Mango, I also got an update on my bootloader (from 4.5 -> 5.0). It added a few extra lines to my SPL screen but did not fix it. Computer still does not detect the phone.
I tried this again hoping for a better fix, installed an old backup to my phone (7392) and ran the mango update process again in Zune. At 7392 (NoDo) my bootloader was still at 5.0, and broken. After mango was installed it went back to 4.5 with only the one line on the red part (see pic 1) and after that zune offered my the update again for the bootloader and put it back to 5.0. With writings in both red and green part, but no serial or usb text in the white part (see pic 2) and no connectivity to my pc.
It had me thinking that downgrading the spl from 5.0 -> 4.5 should be possible with this methood, I cant verify that because of my broken SPL. But I've read here that it's not supposed to be possible? And also that the SPL should be repairable if the update to 5.0 can do this semi-fix. If only Microsoft would send the compleat SPL instead of just updating it.
Might you be able to write a guide for us?
Related
Hello to all ..
My problem is that here ..
In a few words I wanted to install in my HTC 7392 with node HD7 SPL Bootloader 4.5 and unlocked the rom modified mango ..
but before you do anything, I had to install HSPL / RSPL in my HTC HD7 ..
I downloaded the "DFT_XSPL_WP7FG1"
I followed a guide ..
MAH reached the point of selecting the SPL, the list of the program reached only up to 3.4 ..
so my HD7 being with SPL 4.5 you could not do so I tried to install the 3.4 "I did na bull****" ..
so going forward I get an error in the program where it was impossible to go on ..
So I unplugged the HD7 and I tried to do it again ..
MAH OSPL when I open "volume down and power button" not come out as written, but all I get only one written with the words "SS-BC PD29100 (4k) ..
What has happened? knows someone explain why?
I already tried to do the backup but nothing = (..
What does the spl screen say when your in bootloader?
Sounds like you have the 4.xx version.. If that's the case you need to flash an official nodo rom first. The hspl doesn't support spl's 4.xx yet.
Sent from my HD7 T9292 using XDA Windows Phone 7 App
crazysax1 said:
MAH OSPL when I open "volume down and power button" not come out as written, but all I get only one written with the words "SS-BC PD29100 (4k) ..
What has happened? knows someone explain why?
Click to expand...
Click to collapse
if your Bootloader does indeed only have one thing written on it...
then you have half-bricked your device.
according to cotulla, here, it is impossible to recover such devices.
though...
according to dj.95, here, you can recover your device using the goldcard method.
good luck.
sh4d0w86.
But you have to worry about?
What are the consequences?
Is serious?
crazysax1 said:
Hello to all ..
My problem is that here ..
so my HD7 being with SPL 4.5 you could not do so I tried to install the 3.4 "I did na bull****" ..
(..
Click to expand...
Click to collapse
you didnt read the instructions that are in giant bold letters all over those threads...you had spl 4.5 and tried to install the hspl. youve unfortunately half bricked your phone and currently it looks like it may NOT be fixable at all. try the gold card method listed above, i havent done it or read the thread but briefly but it looks like it may be a work around. unfortunately tho youre phone is BBQ'd.
sh4d0w86 said:
if your Bootloader does indeed only have one thing written on it...
then you have half-bricked your device.
according to cotulla, here, it is impossible to recover such devices.
though...
according to dj.95, here, you can recover your device using the goldcard method.
good luck.
sh4d0w86.
Click to expand...
Click to collapse
i don't thing with the goldcard method we recover our device! my device work ok, but don't go to boot usb host mode because bootloader is half bricked! then no gold card works...
(or maybe it's me, that does not access the USB host mode?) ( camera + vol- + power?)
alessio81pa said:
i don't thing with the goldcard method we recover our device! my device work ok, but don't go to boot usb host mode because bootloader is half bricked! then no gold card works...
(or maybe it's me, that does not access the USB host mode?) ( camera + vol- + power?)
Click to expand...
Click to collapse
i honestly have no idea how goldcard method works.
haven't had any experience with it.
you may message the individual who's post i linked to and ask them.
sorry i can't be of more help.
sh4d0w86.
Half bricked possibilities
Hi friends. Do you really know anybody, if goldcard, Zune HTC update, JTAG or something another can solve hb problem? I am also in the "warnings late reading ignorants" club from last weak. But, I got a reply from a single "Half Bricked repairing" service near of Central Europe (GSM-TechNix.de): "Dear Sir, HTC 7 Pro is no Supported by JTAG! Sorry we can not help for this Phone." I have a little idea - to replace only internal information about bootloader version (I have no info on tricolore, but 3.2.2250.0 in Settings/about), connect to Zune and replace HTC update, if it is depend by this number. Is it possible? I have unlocked phone with pre-nodo (older backup has deleted by Zune), then HTC debug application or some homebrew features for values writing can work.
(From another forums:
_________
"Just updated my half bricked phone(bootloader problem) via Zune with HTC update for Windows Phone and the bootloader hasn't been fixed, so our only chance is with XTC Clip or DFT to come with a solution
Actually I got the same problem using an HTC Trophy A1 Version."
________
"For now your/our phone(s) are half-bricked. But as soon as a new update is available - including a new Radio Version everything will work fine again. Had the same problem when debranding my phone. After updating to 7932 via Zune everything was fine again - until I applied the leaked Mango Update.
So again - be patient "
________
"If your device is halfbricked you can use the goldcard method to recover your phone. If it's full bricked you need to make a jTag."
________
"Goldcard cannot repair halbricked WP7 phone."
________
). Thanks for replies, sorry for my english. M.
Hi, i am quite new and i dont know how to flash custom roms. i also have some questions:
1) Do i loose all data and apps when i flash a custom rom?
2) I read, that i need to install "DFT HSPL RSPL WP7F3" first, but i also read on this page ( http://forum.xda-developers.com/showthread.php?t=1195647 ) that i shoud not install it:
"WARNING TO ALL:
Do NOT use RSPL / HSPL with Mozart 4.XX and other RUU ROMS with MANGO.
All WP7F devices affected: MOZART, GOLD, SCHUBERT, MONDRIAN, SPARK!
It will damage your device. Not a joke."
So what to do now?
3) The custom rom of my choise would be "Nextgen+ ROM 3.1". After installing it, will i be able to receive the latest MS WP7 updates the normal way?
4) is there a not "enhanced" version of the latest Tango update? I would prefer that kind of version more then a custom one with functions/changes/bugs i do not like! If yes, where to find?
5) Is there any good how-to-do page to explain the flashing of custom roms?
THANKS
stephanwiw said:
Hi, i am quite new and i dont know how to flash custom roms. i also have some questions:
1) Do i loose all data and apps when i flash a custom rom? YES
2) I read, that i need to install "DFT HSPL RSPL WP7F3" first, but i also read on this page ( http://forum.xda-developers.com/showthread.php?t=1195647 ) that i shoud not install it:
"WARNING TO ALL:
Do NOT use RSPL / HSPL with Mozart 4.XX and other RUU ROMS with MANGO.
All WP7F devices affected: MOZART, GOLD, SCHUBERT, MONDRIAN, SPARK!
It will damage your device. Not a joke."
So what to do now? DOWNGRADE FIRST
3) The custom rom of my choise would be "Nextgen+ ROM 3.1". After installing it, will i be able to receive the latest MS WP7 updates the normal way? YES but why?
4) is there a not "enhanced" version of the latest Tango update? I would prefer that kind of version more then a custom one with functions/changes/bugs i do not like! If yes, where to find?
5) Is there any good how-to-do page to explain the flashing of custom roms? YES
sh4d0w86 has the best instructions here ! and thank him to !
read all that sh4d0w86 has
THANKS
Click to expand...
Click to collapse
cheers and have a gr8 day
thanks button is next to the qoute button
****, i tried this how-to-do and FAILED!
I came to step 6
"6.a. for Europe devices, see ansar.ath.gr's thread, here."
cause i have a europe device and latest Mango Version.
The installing bar went up to 100% but after the phone restartet the program displayed:
Eroor 270: Update Error
The image file is corrupted. Please check you Update Utility
and the phone restartet in the bootloader version.
HELP, CAUSE NOTHING IS WORKING ANYMORE!
After starting my phone i read the following on my screen:
PD29100 MFG SS-BC (4K)
SPL-1.57.2250.0(113571)
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
SD SANDISK 7580MB Class0
Partition Info-v211v413
ok
need more info
can phone go into bootloader?
what rspl/hspl did you install?
is usb/ seriel displayed?
cheers and have a gr8 day
thanks button is next to the qoute button
jhonny said:
ok
need more info
can phone go into bootloader?
what rspl/hspl did you install?
is usb/ seriel displayed?
cheers and have a gr8 day
thanks button is next to the qoute button
Click to expand...
Click to collapse
Thanks, as i wrote, the bootloader shows the info i added in my last post.
i tried to open the tool to install rspl/hspl, but that programm doesnt load. i use windows 7, but everytime i open the program there is an error. i tried the program on a win XP pc and there it is working, but also after installing ZUNE i do not have a usb driver... so where do i get a usb driver?
okay so far: i can boot an old version of the OS! right now i am running an update and hope, that the SPL-Version is working for the RSPL/HSPL cracking!
The biggest problem right now is the version of my bootloader, which is SPL-1.57
This bootloader is not supporter by the RSPL/HSPL. How can i install a new bootloader, which is compatible.
When i choose a bootloader close to the 1.57 version, e.g. 1.56 or 1.60 the installation on the pc finishs, but the device is not booting and therefore the SPL is still standing there...
Could it be, that the installation needs some time? more then 5 minutes on the device, cause it looks like that my phone is freezed after it (when i remove the usb-cable, the screen still shows the usb connection...)
What is a radio?
http://forum.xda-developers.com/wiki/HTC_HD7/Radios
What version should i install? Is the radio = bootloader?
More and more problems.
the OS i now have installed has just english US keyboard... the update to Mango is not working too!
**** i just want to get back to the old version...
i am from germany, had a 5.X bootloader and latest mango update!
Please, can anyone help me to get back to that state?!?
stephanwiw said:
The biggest problem right now is the version of my bootloader, which is SPL-1.57
This bootloader is not supporter by the RSPL/HSPL. How can i install a new bootloader, which is compatible.
When i choose a bootloader close to the 1.57 version, e.g. 1.56 or 1.60 the installation on the pc finishs, but the device is not booting and therefore the SPL is still standing there...
Could it be, that the installation needs some time? more then 5 minutes on the device, cause it looks like that my phone is freezed after it (when i remove the usb-cable, the screen still shows the usb connection...)
What is a radio?
http://forum.xda-developers.com/wiki/HTC_HD7/Radios
What version should i install? Is the radio = bootloader?
Click to expand...
Click to collapse
hi stephanwiw
by what you have writen , you have downgraded your phone hspl bootloader to less then 3.xx . thats good
now flash/install cotulla custom hspl number 3 http://htcfanboys.com/download/cotulla/?action=view&file=2942
once you have done that, check bootloader screen again , should say cotulla
download custom rom, enter bootloader again and flash
radio comes with rom, so before you start to play with radio install, try phone first , see how it works then.....
cheers and have a gr8 day
thanks button is next to the qoute button
---------- Post added at 08:17 PM ---------- Previous post was at 08:10 PM ----------
stephanwiw said:
More and more problems.
the OS i now have installed has just english US keyboard... the update to Mango is not working too!
**** i just want to get back to the old version...
i am from germany, had a 5.X bootloader and latest mango update!
Please, can anyone help me to get back to that state?!?
Click to expand...
Click to collapse
once you have cotulla custom hspl will be all good.
you can have custom rom, and they are gr8, all will be up to date(mango..tango) and better
cheers and have a gr8 day
thanks button is next to the qoute button
Thanks for the help, but i choosed another way.
Finally i managed to install a clean "normal" rom from Mango. Installed all old apps again and i am happy to have a working phone again The complicated process of hacking my device is over!
But one last question is interesting for me: Is there any Tango Rom out for the HTC HD7 without any custom changes? Can it be installed without an hacked phone? Would i lost all my data again, or would it be a real update?
Thanks!
stephanwiw said:
Thanks for the help, but i choosed another way.
Finally i managed to install a clean "normal" rom from Mango. Installed all old apps again and i am happy to have a working phone again The complicated process of hacking my device is over!
But one last question is interesting for me: Is there any Tango Rom out for the HTC HD7 without any custom changes? Can it be installed without an hacked phone? Would i lost all my data again, or would it be a real update?
Thanks!
Click to expand...
Click to collapse
sorry to hear that you couldnt install custom rom!
if you have installed a stock rom, and plug phone to pc, run zune and once an updade is offered, you can update that way, and no you shouldnt loose any data that way.
cheers and have a gr8 day
thanks button is next to qoute button
similar problem!
hey guys! i'm new to the hd7 scene but i've done a lot of flashing previously. i've got a similar problem as stephanwiw. my SPL is the same (1.57.2250.0) and when i try to RSPL, the device just stays on the tricolour screen and doesn't restart. if i pull out the battery and go back into tricolour screen, it just says i still have OSPL of 1.57. i have windows 7 (64 bit) and i have WMDC installed.
does anyone know what the issue is here?
all help is appreciated
EDIT: just updating for anyone else who has a similar problem because i found a very simple solution
i was only choosing the closest SPL to mine which was 1.56. but then i chose one which was larger than the SPL that i had and that was 1.60. and that's all i needed. it actually makes sense in retrospect as to downgrade any SPL you need to flash an official ROM, so i guess this was a stupid mistake.
hi gagannitrate
nice to hear you worked it out and got it working!
it all sounds hard but all you need is to go slow and follow every step sh4d0w86 has listed.
cheers and have a gr8 day
thanks button is next to qoute button
jhonny said:
hi gagannitrate
nice to hear you worked it out and got it working!
it all sounds hard but all you need is to go slow and follow every step sh4d0w86 has listed.
cheers and have a gr8 day
thanks button is next to qoute button
Click to expand...
Click to collapse
Hi guys
I have a htc hd7 and I tried to downgrade it to pre mango by using ROM by ansar. when it reached a 100% there was an error message saying 270 image is corrupted.
After several attempts my started working with this rom and the tricolor screen now says:
PD29100 MFG SS-BC (4K)
SPL-1.57.2250.0(113571)
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
When I try to install RSPL my phone is recognised but it doesn't restart at the end of the process and RSPL isn't istalled. I tried all the versions 1.56, 1.60, 1.61, 1.64, 1.68, 1.69 but still I can't install RSPL
Can please someone help?
Thanks
hi jtsek
RSPL is not permenant, and only used once, so after every flash you have to flash again
HSPL will stay on your phone always,
but remenber if phone needs repair/warranty then before you send it, you have to flash stock rom again to get rid of HSPL because void warranty
cheers and have a gr8 day
thanks button is next to qoute button
Hi guys
I m using htc hd 7 and i just got the phone yesterday so i m very new on this windows phone
I m currently on the stock version of the rom
I want to unlock my phone so that i could get better battery life and performance'
I hope u guys can fully guide me to unlock my htc hd 7
Thanks in advance
http://forum.xda-developers.com/showthread.php?t=1295068
Follow the tutorial in this link and its done
To downgrade from 5.xx I prefer goldcard method cuz its the simplest
Happy to help
can i know what is the point of installing new radio? Which radio do u all recommend?
flash a new rom only if have a problem with the current radio....if radio works properly there's no need to flash one
which ruu should i download?
from this link
http://www.filefactory.com/f/6eefe15693c7a0c9/
os 7.1
radio 5.71.09.02a
bootloader 5.11.2250.0
chip version 2.2.5.0
is your radio not working? only then flash a diff Radio....
u can flash any radio.... preferably the one similar to your present rom now...
---------- Post added at 03:01 PM ---------- Previous post was at 03:00 PM ----------
install R/Hspl and flash a custom ROM...that should solve the problems with your Radio if any
I meant that in the goldcard method
They told that i need nbh file
So i dont know which file to choose in the in link they posted
oh that....my bad....i was thinking of the radio....
in that case anything is fine....u can use any rom....
u just use this rom to lower your bootloader.....
which ruu file should i download?
There is a long list of them. I cant choose which one.
Thanks in advance.
Any rom is the same....doesnt matter....just download any file and go on with the tutorial....
Can i install custom rom right after i downgrade my ospl or should i go through any other process?
after u lower your bootloader....u hav to install RSPL or HSPL.....that's like a safe mode for flashing.... then u can flash any custom ROM you want
Tutorial for R/HSPL is in the link i gave you
I have managed to boot in to usb host mode.
My screen stuck on the usb mode screen and its NOT doing anything.
Any idea why?
androidboy123 said:
I have managed to boot in to usb host mode.
My screen stuck on the usb mode screen and its NOT doing anything.
Any idea why?
Click to expand...
Click to collapse
connect the usb to the pc properly....just check all the connection and the files you copied....have faith
Thanks for the reply.
I properly connected the cable to the pc but however it keep on showing the usb host mode and it just stucks there. I cant click anything else.
http://forum.xda-developers.com/showthread.php?t=1577074
Your problem is similar to this I guess...
Guys do u think that USB hub will work instead of y cable. I m having trouble finding the y cable.
http://forum.xda-developers.com/showthread.php?t=1411904
if you find y cable confusing or difficult just do this
i did this on my tmobile HD7 and it worked
Guys is there any other where to install w7 phone drivers without installing Zune? Cause my connection is very slow right now.
thanks
unfortunately no....Zune is a must for WP7
you said connection is slow...can you explain further?
Hi, I have a HTC HD7 and is being bricked for a while now, I went to a couple of shops to see if they could fixed but none of them did.. So I would like to know if someone here could help me and I would pay for it.. I live in Miami, FL and if someone is around here south florida, that can do it please let me know and get in touch with me.
Thanks,
Jr ritzer
See if you can enter bootloader,if you can u can flash a new rom using the goldcard method
http://forum.xda-developers.com/showthread.php?t=1295068
bootloader
hey sirajgoku, thanks for the link..:good: im going to try ur advice, but can u please tell me where to get a goldcard and another thing I just try to get the hd7 in bootloader and it got and it's showing me this "PD29110 SS-BC (4k)", do u know where can I find what that means..
thank u so much for everything.
The PD29110 is your devices MID (model id) There are a couple goldcard method tutorials available for hd7. Here's a pretty detailed one you can follow. you need a card reader, some USB cables to make a Y cable, easiest method Y cable (otg)
http://forum.xda-developers.com/showthread.php?t=893152
The hd7 is considered the Schubert, which you'll see in the tutorial.
Are you getting any other information while in bootloader mode, like bootloader version, OS or mico info?
If you found this helpful please click he thank you button!
no more info in bootloader mode, it doesn't give me any version or os, just what I wrote before "PD29110 SS-BC (4k)".. when I turn on the phone it just stay in the htc screen and then vibrate like 7 times and that's it.
Jr Ritzer said:
no more info in bootloader mode, it doesn't give me any version or os, just what I wrote before "PD29110 SS-BC (4k)".. when I turn on the phone it just stay in the htc screen and then vibrate like 7 times and that's it.
Click to expand...
Click to collapse
Ok, definitely bricked, but is it a small or big brick and it sounds like you have the big brick! Then the only other question is, can you enter USB host mode still and if so does your computer recognize it when it's plugged in? Press camera+volume down+power on, to enter in host mode.
If you found this helpful please click the thank you button!
Jr Ritzer said:
no more info in bootloader mode, it doesn't give me any version or os, just what I wrote before "PD29110 SS-BC (4k)".. when I turn on the phone it just stay in the htc screen and then vibrate like 7 times and that's it.
Click to expand...
Click to collapse
If you can get to BL mode then you should be able to get to USB HOST MODE. If you can do that PM me. I'm in Ft Lauderdale not too far and I'v goldcarded at least ten of 'em. If you can't get to Host mode next stop JTAG.
It will go into bootloader mode but it's bricked. Meaning there's only one line of information showing in BL mode which is the devices MID. If it will go into USB host mode there is a possibility of fixing it using the Goldcard method. If it won't go into USB host mode, there is one more possibility of fixing it besides using and having to resort to the Jtag/riff box. Using a cab and the cab sender, like the schubert 2250.21.50001.728 cab. Which if successful would upgrade the spl to 5.xxx and would added a few more lines of information to the bootloader screen but wouldn't repair it completely to where the serial/USB show up on the bottom line. However this should allow you to enter into USB host mode now and then you could use the Goldcard method and flash a stock/shipped rom for your devices specific carrier. This should repair the bootloader and should also downgrade your spl and OS version as well, depending on what version you flash. At this point you can update through Zune to the current OS version and mango. Then if you wanted to, you could use your goldcard to downgrade the spl and install rspl/hspl and flash a custom rom!
Im a newbie in the world of Windows phone...
Can anyone help in giving a tutorial regarding how to flash my HTC HD7 with custome ROM's..
What are the requirements required..And the specifications..
Plz help me...
First you have to downgrade your spl to at 3.xxx or below. Then flash rspl or hspl to your device, then you can flash a custom rom! Just follow shadows tutorial here
http://forum.xda-developers.com/showthread.php?t=1295068
If you enter into bootloader and post your information back from the screen, can help walk you through it! To enter bootloader, phone off, hold down the volume button and power the phone back on while continuing to hold down the volume down button, this will bring you into bootloader mode a tri colored sreen.
If you found this helpful please click the thank you button!
xdrc45 said:
First you have to downgrade your spl to at 3.xxx or below. Then flash rspl or hspl to your device, then you can flash a custom rom! Just follow shadows tutorial here
http://forum.xda-developers.com/showthread.php?t=1295068
If you enter into bootloader and post your information back from the screen, can help walk you through it! To enter bootloader, phone off, hold down the volume button and power the phone back on while continuing to hold down the volume down button, this will bring you into bootloader mode a tri colored sreen.
If you found this helpful please click the thank you button!
Click to expand...
Click to collapse
PD29100 SS-BC(4K)
SPL-5.11.2250.0
MICROP(LED) 0*07
TOUCH S1(v1.8,#1624)
SD SANDISK 7580MB
Partition info-v211v413
Can u give me the details...
+1 for ur help...
Ok with spl 5.xxx you have to use the goldcard method. Unless you have a backup through Zune... Meaning, did you upgrade the hd7 through Zune from pre mango to mago version?
If you found this helpful please click the thank you button!
xdrc45 said:
Ok with spl 5.xxx you have to use the goldcard method. Unless you have a backup through Zune... Meaning, did you upgrade the hd7 through Zune from pre mango to mago version?
If you found this helpful please click the thank you button!
Click to expand...
Click to collapse
I had updated today...its now windows 7.5
What is goldcard u mentioned...is this a different method other than u mentioned before...
And one more thing do u get balance notification after call or txt msg..,because im not able to get it...
Goldcard is one of the only methods of downgrading your spl from 5.xxx without having a backup. Goldcard, you need to make a Y cable out of USB cables and have a sd card reader to complete the process!
Not sure what you mean by balance notification?
Oh do you mean like phone credit balance? Are you on a pay as you go plan? Im on contract with month to month billing and get notification when my bill is due and can view my usage through my carrier account!
If you found this helpful please click the thank you button!
xdrc45 said:
Not sure what you mean by balance notification?
Oh do you mean like phone credit balance? Are you on a pay as you go plan? Im on contract with month to month billing and get notification when my bill is due and can view my usage through my carrier account!
If you found this helpful please click the thank you button!
Click to expand...
Click to collapse
Mine is prepaid, so after each call or message a notification will occur, like how notification occur on delivery of message...But before it was displaying now it has stopped, i think after the update...Are u able o get it...
roshand1 said:
Mine is prepaid, so after each call or message a notification will occur, like how notification occur on delivery of message...But before it was displaying now it has stopped, i think after the update...Are u able o get it...
Click to expand...
Click to collapse
No I don't get notifications... I'm pretty sure it has to do with the update and I don't think there is a way to turn it back on either!
---------- Post added at 12:54 PM ---------- Previous post was at 12:44 PM ----------
roshand1 said:
I had updated today...its now windows 7.5
Click to expand...
Click to collapse
That's good... We can do the spl downgrade without the Goldcard method then. So when your ready just let me know, I'll walk you through the process and we will have you running a custom rom in no time!
xdrc45 said:
No I don't get notifications... I'm pretty sure it has to do with the update and I don't think there is a way to turn it back on either!
---------- Post added at 12:54 PM ---------- Previous post was at 12:44 PM ----------
That's good... We can do the spl downgrade without the Goldcard method then. So when your ready just let me know, I'll walk you through the process and we will have you running a custom rom in no time!
Click to expand...
Click to collapse
But after windows update to 7.5, my spl is 5.XXX, n for 5.XX goldcard method is required right...
This bootoader details,
PD29100 SS-BC(4K)
SPL-5.11.2250.0
MICROP(LED) 0*07
TOUCH S1(v1.8,#1624)
SD SANDISK 7580MB
Partition info-v211v413
what i sent was after my full update to 7.5...
And you quoted as i requires gold card method...Now how you ae saying it does not require goldcard.... Cann you explain in brief please...
Typically with a spl of 5.xxx or higher you would have to use the Goldcard method. But if you have a pre mango backup you can restore your phone through Zune, connect device to Zune - phone - settings - restore. It will restore your device to before the update, then re update the phone again through Zune like your upgrading to mango again. But this time once the Mango update happens (the phone will reboots twice after the update is applied, once for changing the spl and once for loading Mango) The spl is changed to 4.xxx that's when you stop the update and unplug the phone, you have to do this before the last update is applied which is the 7740/HTC Firmware Update, if you apply that too, it will change your spl to 5.xxx again, so you have to stop after the Mango update and then you can follow shadows tutorial for spl 4.xxx downgrade. Plus it will show you in the update box on the computer what update step it is on, so it's really easy to do! This is the same process that I used to downgrade my spl from 5.xxx to 4.xxx, then I finished using shadows tutorial to do the rest! The whole process took about and hour to fully complete and to have Deepshining rom installed on my device!
Why im not able to jail break my phone..When i run jail breaker, it say's phone is not connect through USB or Zune is not open..Though phone is cnnected through USB and Zune is open..
Should the phone be unlocked for it...Or it will work without unlock...
roshand1 said:
Why im not able to jail break my phone..When i run jail breaker, it say's phone is not connect through USB or Zune is not open..Though phone is cnnected through USB and Zune is open..
Should the phone be unlocked for it...Or it will work without unlock...
Click to expand...
Click to collapse
Are you following the directions and steps that I told you or are you trying to do it with a different method? If so what step are you on?
xdrc45 said:
Typically with a spl of 5.xxx or higher you would have to use the Goldcard method. But if you have a pre mango backup you can restore your phone through Zune, connect device to Zune - phone - settings - restore. It will restore your device to before the update, then re update the phone again through Zune like your upgrading to mango again. But this time once the Mango update happens (the phone will reboots twice after the update is applied, once for changing the spl and once for loading Mango) The spl is changed to 4.xxx that's when you stop the update and unplug the phone, you have to do this before the last update is applied which is the 7740/HTC Firmware Update, if you apply that too, it will change your spl to 5.xxx again, so you have to stop after the Mango update and then you can follow shadows tutorial for spl 4.xxx downgrade. Plus it will show you in the update box on the computer what update step it is on, so it's really easy to do! This is the same process that I used to downgrade my spl from 5.xxx to 4.xxx, then I finished using shadows tutorial to do the rest! The whole process took about and hour to fully complete and to have Deepshining rom installed on my device!
Click to expand...
Click to collapse
Im not getting anything like restore on zune..There is restore only for Media files..
In upadte option its says no moe updates and the restore option is not there...
roshand1 said:
Im not getting anything like restore on zune..There is restore only for Media files..
In upadte option its says no moe updates and the restore option is not there...
Click to expand...
Click to collapse
Make sure your phone is plugged into the computer when trying to get the restore point. Should be select, phone - settings - update (Zune should check for an update and say, no updates availabe) and then there should be a restore button towards the bottom of the update box. If it's not there then you must not have a pre mango backup for it and you will have to use the Goldcard method to do it which is pretty easy once you have the Y cable put together and a sd card reader! Here's a pretty detailed tutorial for the Goldcard method
http://forum.xda-developers.com/showthread.php?t=893152
Then there is no backup i feel, because no restore button is displayed....
I wanted to know without unlocking the phone like mine..Can we do jailbreak....
To download paid apps for free...
Hi,hope this is the right place to ask this. I bought this HD7 last week from Ebay and it's current specs are;
Software: Windows 7.5
OS: 7.10.8107.79
Bootloader: 5.11.XXX
Zune is saying there's an update available,haven't updated yet though.
So my question is,I want to install the Deepshining rom,do I do the following;
Flash the NoDo rom as listed in the Q&A section of the Deepshining thread,via bootloader,to downgrade SPL.
Flash RSPL via bootloader,then immediately flash Deepshining rom.
Is it that easy,or am I missing something (or everything !) Have flashed loads of roms on phones in the past with no bother,but this seems dodgy to me as I keep seeing the word 'brick' and that scares me a bit.
Thanks for any light you can shed on this.
transmaniacon said:
Hi,hope this is the right place to ask this. I bought this HD7 last week from Ebay and it's current specs are;
Software: Windows 7.5
OS: 7.10.8107.79
Bootloader: 5.11.XXX
Zune is saying there's an update available,haven't updated yet though.
So my question is,I want to install the Deepshining rom,do I do the following;
Flash the NoDo rom as listed in the Q&A section of the Deepshining thread,via bootloader,to downgrade SPL.
Flash RSPL via bootloader,then immediately flash Deepshining rom.
Is it that easy,or am I missing something (or everything !) Have flashed loads of roms on phones in the past with no bother,but this seems dodgy to me as I keep seeing the word 'brick' and that scares me a bit.
Thanks for any light you can shed on this.
Click to expand...
Click to collapse
Wish it was that easy...lol! Sounds like you understand for the most part, but with the bootloader of 5.xxx there are really only two options for being able to flash a custom rom.
1. A pre-Mango backup/restore point on your p/c. Which since you just got the device won't be a possibility for you.
2. The goldcard/Y cable method. Which is really easy and inexpensive! You can build you own cable or purchase one.
Check out Shadows tutorial, he explains the whole process and steps to flash a custom rom.
http://forum.xda-developers.com/showthread.php?t=1295068
http://forum.xda-developers.com/showthread.php?t=1295068[/QUOTE]
Thanks,looks like I could do that and only for a small outlay. But,I may be back..lol.