Database Develop

Rom Problem With my X1

Hi`Guys
for the last few days im having an serious rom problem with my Sony Ericsson X1 sines i was looking for an good 6.5 rom that fits and works smooth with my X1 i found an cooked 6.5 rom belong to HD2 aka Leo2 and i reveiw it and i like it so i charged my phone to the full and unlock my phone using "HARDSPL Tool" after that i upgraded my phone with the new rom ,i like it at the first but after some times i faced alot of hangs and bugs within the rom besides the rom overload the processor that would make the phone runs slow so i had to place back my original rom so i used Sony Ericsson Update service "SEUS" to replace my current rom and when i runed the update it asked me to place back the stock SPL and i did and runed the update again but it said that i have he latest software update so i tryed to go all the way around and use the traditional way to downgrade my phone but here is the problem when ever i start the downgrade prosses it gives me update error number {[260] connection} the update stop and start the recovery prosses ,then i tryed to reunlock the phone but it gave me the same error ,so i tryed to get smart and i stop using the computer for the downgrading and moved to flashing methods farmatted my micro-sd to FAT32 placed the required nbh file named with Kovsimg but when i bootload my phone it stops at the loading part without going throw the checking prosses then done the same with the the SPL but the same it stick at the loading stage ,i start to get hopeless my last option was to use the MTTY Tool but it only formatted the rom without flashing the phone
so now im using 20% of my phone option to avoid bugs or hangs and my phone stick with bad 6.5 rom protacted with StockSPL that cant be changed
so guys any one faced the same problem ? plssss help i really feel like my phone its on handicap status
pls help me...

Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799

drnjstj said:
Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799
Click to expand...
Click to collapse
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways

error_man said:
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways
Click to expand...
Click to collapse
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck

DrakenKorin said:
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck
Click to expand...
Click to collapse
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho

error_man said:
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho
Click to expand...
Click to collapse
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...

DrakenKorin said:
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...
Click to expand...
Click to collapse
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl

error_man said:
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl
Click to expand...
Click to collapse
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps

DrakenKorin said:
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps
Click to expand...
Click to collapse
it toke me really long time to find the file in other site other than rapshared and it didnt worked i tryed also newer StockSPL also the same the phone its not updating im getting really helpless here

Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.

ted presley said:
Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.
Click to expand...
Click to collapse
yeas my friend i tryed it many many times it didnt work it give the same error [262] and i dont really trust windows 7 or vista with my phone upgrade i only use windows Xp for such things
thank u for ur support n help...

Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.

NeoXerO said:
Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.
Click to expand...
Click to collapse
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server

http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help

error_man said:
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server
Click to expand...
Click to collapse
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers

circleofomega said:
http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help
Click to expand...
Click to collapse
i didnt help too its the same one the i first used it that got my phone stuck..i really feeling helpless but i thanks u for ur hard work in helping me to get over my problem thanks

DrakenKorin said:
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers
Click to expand...
Click to collapse
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update

error_man said:
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update
Click to expand...
Click to collapse
sure
check pavelx1 rom thread in the sticky section
hes got R1-R3 country specific stock rom collection

1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL

kjk said:
1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL
Click to expand...
Click to collapse
i guess your way its the only thing that i didnt do yet but the problem is that all thouse stock roms are uploaded to rapidshare and i cant download it from there just hope is any body could tell me other site that i can download thouse new frimware or latest x1 stock rom

plZ! help my hd7 bootloader halfBricK problem >>

....... iget this lonly messege PD29100 SS-BC (4K) on the red line of the bootloader screen wich known as halfBick thats cuzed (by mistake ) to update my spl 4.xx to older version
so plzz any ideas 2 solve my prob>
note :
my wp7 is working but icant flash any rom

I'm sorry for you!
Can you try the goldcard methode to flash roms?
As far as I read the phone isn't recognized by the PC properly so flashing via USB cable isn't possible

angle4love said:
....... iget this lonly messege PD29100 SS-BC (4K) on the red line of the bootloader screen wich known as halfBick thats cuzed (by mistake ) to update my spl 4.xx to older version
so plzz any ideas 2 solve my prob>
note :
my wp7 is working but icant flash any rom
Click to expand...
Click to collapse
Did you try to flash your original ROM specified for your device?? I only used my original TMOUS CID .531 ROMS to go back lower bootloader.
I think you must have done soomething wrong, don't get confused when you see on your decive that the firmware is exapmle 2250.21.40502.401(my current one) doesn't mean I have to flash another .401 based CID ROM to lower bootloader, you must ALWAYS use the one specified for your device or else you will end up with the problem you have now or as they say DO NOT RSPL/HSPL your device when on BL 4.xxx it has been warned like a million times already.

I suggest you find someone near you who has your same phone and ask them to restore a backup of his phone and from his computer via zune! A member of an Italian forum has solved that!

first thank u guys for ur helps >>> now iam trying to download the original rom >> and my braother have the same mobile iwill try to restore his backup>>> iwill try
how i can use the golden card ????????????????
---------- Post added at 04:15 PM ---------- Previous post was at 04:09 PM ----------
ginjamaka said:
Did you try to flash your original ROM specified for your device?? I only used my original TMOUS CID .531 ROMS to go back lower bootloader.
I think you must have done soomething wrong, don't get confused when you see on your decive that the firmware is exapmle 2250.21.40502.401(my current one) doesn't mean I have to flash another .401 based CID ROM to lower bootloader, you must ALWAYS use the one specified for your device or else you will end up with the problem you have now or as they say DO NOT RSPL/HSPL your device when on BL 4.xxx it has been warned like a million times already.
Click to expand...
Click to collapse
my firmware= 2250.21.40502.728 how about it
---------- Post added at 04:55 PM ---------- Previous post was at 04:15 PM ----------
1/trying to flash original rom failure
---------- Post added at 05:46 PM ---------- Previous post was at 04:55 PM ----------
2/backup method = X

Can u enter USB host mode?
Press camera+volume down+power on to enter the bootloader in host mode.
If u can. May be gold card method will work.

same BootLoader screen

I don' know exactly but restoring a backup from an other phone via Zune should not work. By the way, did Zune also save SPL & Radio or only OS?
I thoin as long as you do not see Serial or USB at the bottom of you bootloader, the device isnt recodniced by the PC for flashing.
The only methode wich could work is flashing without USB connectein to the PC (Goldcard)
until now I didn't read a post from someone who tried it with a half bricked device, so its only a possibility for you, but the only possibility I can think of.
If you don't know what goldcard means, search the forum.
it's an external connected SD card for flashing via SD (no connection to pc needed)
The last escape of you situation would be to JTAG you device, but I'm not familiar with JTAG so its really the last thing you should test if you do not want to send it back to your local HTC partner.

In this case,when SPL is deleted,pc dnt recognised the phone in bootloader,but backup via Zune is possible in normal standby mode,so the pc can recognised the phone without problems!

sandman01 said:
I don' know exactly but restoring a backup from an other phone via Zune should not work. By the way, did Zune also save SPL & Radio or only OS?
I thoin as long as you do not see Serial or USB at the bottom of you bootloader, the device isnt recodniced by the PC for flashing.
The only methode wich could work is flashing without USB connectein to the PC (Goldcard)
until now I didn't read a post from someone who tried it with a half bricked device, so its only a possibility for you, but the only possibility I can think of.
If you don't know what goldcard means, search the forum.
it's an external connected SD card for flashing via SD (no connection to pc needed)
The last escape of you situation would be to JTAG you device, but I'm not familiar with JTAG so its really the last thing you should test if you do not want to send it back to your local HTC partner.
Click to expand...
Click to collapse
First iwont 2 thank u for ur help ^_^
the backup didnt work , it recodniced with pc on the recovery screen but after few seconds get error and restart the phone backing 2 wp
and on bootLoader screen cant recodniced wuth pc
iwill take ur advices and start with the Golden Card , and will see ...
thank u again
---------- Post added at 11:57 AM ---------- Previous post was at 11:51 AM ----------
geppo1975 said:
In this case,when SPL is deleted,pc dnt recognised the phone in bootloader,but backup via Zune is possible in normal standby mode,so the pc can recognised the phone without problems!
Click to expand...
Click to collapse
yes it recodniced 2 pc but cant complete the backup
thaanx
---------- Post added at 12:03 PM ---------- Previous post was at 11:57 AM ----------
CAn any one help me eith the golden card method ... icant under stand any thing about it .. and what is the Y-cable ???????????
and ihave sd memory 8 Gb replacing it can solve the problem ???

great gold card by xtc clip = X
replacing sd card = X
what imust do else ~_~ guys ???????????

There is no fix for half bricked bootloader.
Sent from my HD7 T9292 using Board Express

you have find a jtag device...
There is no another way...
I'm in same trouble

Wow,
if I press "volume Down" and switch on the device, it doesn't start to the bootloader. It's just a plain startup.
Do I have half-bricked too, or what is my problem?
I get this since the downgrade to a pre-Mango-Radio exited with an error.

medri said:
Wow,
if I press "volume Down" and switch on the device, it doesn't start to the bootloader. It's just a plain startup.
Do I have half-bricked too, or what is my problem?
I get this since the downgrade to a pre-Mango-Radio exited with an error.
Click to expand...
Click to collapse
People I've made ​​it!!
"HALF bricked" True times ...
I have an HD7, and yes I had no boot loader more ...
My WP7.5 Mango has even worked ...
Have performed the unlock of ChevronWP7 Labs.com [leads,
then I've done with a backup (Windows Mobile 7 BackupV1.6)
and then by draufgespielt (WP7 Update Cab sender) firmware (schubert_2250.21.50001.728)!
And then I have my HD and started in Boadloader un behold
My Boadloader is back! HURRAY
Is indeed not at all .... How COOL!

^^ let me get it straight the chevron wp7 labs fixed your bootloader????

Adam-dz said:
People I've made ​​it!!
"HALF bricked" True times ...
I have an HD7, and yes I had no boot loader more ...
My WP7.5 Mango has even worked ...
Have performed the unlock of ChevronWP7 Labs.com [leads,
then I've done with a backup (Windows Mobile 7 BackupV1.6)
and then by draufgespielt (WP7 Update Cab station) firmware (schubert_2250.21.50001.728)!
And then I have my HD and started in Boadloader un behold
My Boadloader is back! HURRAY
Is indeed not at all .... How COOL!
Click to expand...
Click to collapse
can you tell us steps with details

If you could write us a step by step that would be fantastic!!! =-D

SPL only semi-fixed
Are you sure it's fixed? Because when I updated to Mango, I also got an update on my bootloader (from 4.5 -> 5.0). It added a few extra lines to my SPL screen but did not fix it. Computer still does not detect the phone.
I tried this again hoping for a better fix, installed an old backup to my phone (7392) and ran the mango update process again in Zune. At 7392 (NoDo) my bootloader was still at 5.0, and broken. After mango was installed it went back to 4.5 with only the one line on the red part (see pic 1) and after that zune offered my the update again for the bootloader and put it back to 5.0. With writings in both red and green part, but no serial or usb text in the white part (see pic 2) and no connectivity to my pc.
It had me thinking that downgrading the spl from 5.0 -> 4.5 should be possible with this methood, I cant verify that because of my broken SPL. But I've read here that it's not supposed to be possible? And also that the SPL should be repairable if the update to 5.0 can do this semi-fix. If only Microsoft would send the compleat SPL instead of just updating it.

Might you be able to write a guide for us?

[Q] HTC HD7 Bricked

Hi, I have a HTC HD7 and is being bricked for a while now, I went to a couple of shops to see if they could fixed but none of them did.. So I would like to know if someone here could help me and I would pay for it.. I live in Miami, FL and if someone is around here south florida, that can do it please let me know and get in touch with me.
Thanks,
Jr ritzer

See if you can enter bootloader,if you can u can flash a new rom using the goldcard method
http://forum.xda-developers.com/showthread.php?t=1295068

bootloader
hey sirajgoku, thanks for the link..:good: im going to try ur advice, but can u please tell me where to get a goldcard and another thing I just try to get the hd7 in bootloader and it got and it's showing me this "PD29110 SS-BC (4k)", do u know where can I find what that means..
thank u so much for everything.

The PD29110 is your devices MID (model id) There are a couple goldcard method tutorials available for hd7. Here's a pretty detailed one you can follow. you need a card reader, some USB cables to make a Y cable, easiest method Y cable (otg)
http://forum.xda-developers.com/showthread.php?t=893152
The hd7 is considered the Schubert, which you'll see in the tutorial.
Are you getting any other information while in bootloader mode, like bootloader version, OS or mico info?
If you found this helpful please click he thank you button!

no more info in bootloader mode, it doesn't give me any version or os, just what I wrote before "PD29110 SS-BC (4k)".. when I turn on the phone it just stay in the htc screen and then vibrate like 7 times and that's it.

Jr Ritzer said:
no more info in bootloader mode, it doesn't give me any version or os, just what I wrote before "PD29110 SS-BC (4k)".. when I turn on the phone it just stay in the htc screen and then vibrate like 7 times and that's it.
Click to expand...
Click to collapse
Ok, definitely bricked, but is it a small or big brick and it sounds like you have the big brick! Then the only other question is, can you enter USB host mode still and if so does your computer recognize it when it's plugged in? Press camera+volume down+power on, to enter in host mode.
If you found this helpful please click the thank you button!

Jr Ritzer said:
no more info in bootloader mode, it doesn't give me any version or os, just what I wrote before "PD29110 SS-BC (4k)".. when I turn on the phone it just stay in the htc screen and then vibrate like 7 times and that's it.
Click to expand...
Click to collapse
If you can get to BL mode then you should be able to get to USB HOST MODE. If you can do that PM me. I'm in Ft Lauderdale not too far and I'v goldcarded at least ten of 'em. If you can't get to Host mode next stop JTAG.

It will go into bootloader mode but it's bricked. Meaning there's only one line of information showing in BL mode which is the devices MID. If it will go into USB host mode there is a possibility of fixing it using the Goldcard method. If it won't go into USB host mode, there is one more possibility of fixing it besides using and having to resort to the Jtag/riff box. Using a cab and the cab sender, like the schubert 2250.21.50001.728 cab. Which if successful would upgrade the spl to 5.xxx and would added a few more lines of information to the bootloader screen but wouldn't repair it completely to where the serial/USB show up on the bottom line. However this should allow you to enter into USB host mode now and then you could use the Goldcard method and flash a stock/shipped rom for your devices specific carrier. This should repair the bootloader and should also downgrade your spl and OS version as well, depending on what version you flash. At this point you can update through Zune to the current OS version and mango. Then if you wanted to, you could use your goldcard to downgrade the spl and install rspl/hspl and flash a custom rom!

pls help

my htc hd7s bootloader screen shows just one line
PD29150 SS-BC(4k)
i got this when something went wrong while RSPL HSPL...
i am not able to install any rom on this..
pls help..
iam attaching snap of screen ..

That's what happens when the phone gets bricked, the bootloader gets damaged and you only get one line, the devices MID information. Did you downgrade your spl first to 3.xxx or below before trying to install rspl/hspl? Can you get into USB host mode? Press camera+volume down+power on, this will bring you into USB host mode. If you can get into USB host mode there is a chance you can repair the bootloader with the Goldcard method. Post back your results and we'll see what we can do to get it fixed for you!

thanks xdrc45
i will try this and get back to u.
aakash

xdrc5
i have tried custom roms many times. but this was sone when i install a stock rom on it and then again used espl hspl. after that i got that screen..
pls tell me how to use gold card method to repair bootloader..
i want ot install custom roms on my device.
thanks

aakashvijay said:
xdrc5
i have tried custom roms many times. but this was sone when i install a stock rom on it and then again used espl hspl. after that i got that screen..
pls tell me how to use gold card method to repair bootloader..
i want ot install custom roms on my device.
thanks
Click to expand...
Click to collapse
Its not really hard you just have to make a Y cable (otg) out of some USB cables and have a SD card reader/flash drive. Here's a detailed tutorial on how to make the Y cable, how to use it and the SD card reader!
http://forum.xda-developers.com/showthread.php?t=893152

xdrc45
i have tried to make cable but the information provided is not sufficient for me to make the cable. pls, if possible, provide me detailed instruction..
thanks

aakashvijay said:
xdrc45
i have tried to make cable but the information provided is not sufficient for me to make the cable. pls, if possible, provide me detailed instruction..
thanks
Click to expand...
Click to collapse
Hello!
try this:http://forum.xda-developers.com/showthread.php?t=1676794

aakashvijay said:
xdrc45
i have tried to make cable but the information provided is not sufficient for me to make the cable. pls, if possible, provide me detailed instruction..
thanks
Click to expand...
Click to collapse
Yeah there you go...try Ruyzalim's goldcard tutorial, great pics, deatailed and easy to follow!! Also when your making the Y cable, don't make it too long in lenth or sometimes it won't work properly!

xdrc45 said:
Yeah there you go...try Ruyzalim's goldcard tutorial, great pics, deatailed and easy to follow!! Also when your making the Y cable, don't make it too long in lenth or sometimes it won't work properly!
Click to expand...
Click to collapse
what if i make an goldcard and replace microsd card in HD7 and then go to usb host mode...
pls suggest because nothing is going works for me..

RIFF box
aakashvijay said:
what if i make an goldcard and replace microsd card in HD7 and then go to usb host mode...
pls suggest because nothing is going works for me..
Click to expand...
Click to collapse
Your only solution to fix the bootloader(SPL), but you must pay to someone who repair phones...
I don't know how much will it cost you...

Problem in Bootloader in HTC HD7

Hey ...
I have a big problem with my phone HD7 that s .. in bootloader mode the USB symbol dont appear
i installed WMDC and WMDM and WMST .....
what can i do more for this problem .. i want to flash my phone but i cant
any help :angel:

Omar Sammak said:
Hey ...
I have a big problem with my phone HD7 that s .. in bootloader mode the USB symbol dont appear
i installed WMDC and WMDM and WMST .....
what can i do more for this problem .. i want to flash my phone but i cant
any help :angel:
Click to expand...
Click to collapse
Your HD7 is semi/small bricked then.
You will have to use the goldcard/ Y cable method to repair the bootloader.
This is the basic idea of what you'll have to do:
Use the goldcard/ Y cable method and flash a stock/shipped rom for your devices specific carrier, through USB host mode. This should repair the bootloader and depending on what stock/shipped rom you use it might downgrade your SPL and OS version, which your SPL has to be at or below 3.xxx to install RSPL or HSPL (which is required to flash a custom rom) and then you can flash a custom rom via bootloader mode.
Look at Shadows tutorial, (below) it explains how to downgrade SPL, flashXSPL and install a custom rom and he has a link for all the stock/shipped roms. Read through it and then click on the goldcard link and that will explain on how to use the goldcard/ Y cable method. You have to make or purchase a Y cable and need a flash drive/card reader, download the goldcard tool and a stock/shipped rom. It's pretty easy to do, let me know if you need any help or have any question.
http://forum.xda-developers.com/showthread.php?t=1295068
This is a good goldcard tut and has good pics of the Y cable, if your gonna make one:
http://forum.xda-developers.com/showthread.php?t=1676794

xdrc45 said:
Your HD7 is semi/small bricked then.
You will have to use the goldcard/ Y cable method to repair the bootloader.
This is the basic idea of what you'll have to do:
Use the goldcard/ Y cable method and flash a stock/shipped rom for your devices specific carrier, through USB host mode. This should repair the bootloader and depending on what stock/shipped rom you use it might downgrade your SPL and OS version, which your SPL has to be at or below 3.xxx to install RSPL or HSPL (which is required to flash a custom rom) and then you can flash a custom rom via bootloader mode.
Look at Shadows tutorial, (below) it explains how to downgrade SPL, flashXSPL and install a custom rom and he has a link for all the stock/shipped roms. Read through it and then click on the goldcard link and that will explain on how to use the goldcard/ Y cable method. You have to make or purchase a Y cable and need a flash drive/card reader, download the goldcard tool and a stock/shipped rom. It's pretty easy to do, let me know if you need any help or have any question.
http://forum.xda-developers.com/showthread.php?t=1295068
This is a good goldcard tut and has good pics of the Y cable, if your gonna make one:
http://forum.xda-developers.com/showthread.php?t=1676794
Click to expand...
Click to collapse
very thanks for you bro ..
at first i thought its over for my mobile :crying: .. so just give me some hope .... i will try it and let you know for the news :fingers-crossed:

Omar Sammak said:
very thanks for you bro ..
at first i thought its over for my mobile :crying: .. so just give me some hope .... i will try it and let you know for the news :fingers-crossed:
Click to expand...
Click to collapse
Your welcome... You'll have your HD7 up and running a custom rom in no time!

xdrc45 said:
Your welcome... You'll have your HD7 up and running a custom rom in no time!
Click to expand...
Click to collapse
i did exactly the same what they said ... makes Y cable and make sure that its work ... copy the SCHUIMG.NBH to memory card "i ever tryed different ways" ... but its still the same result thats its stuck in USB host mode..
nothing happen
where is the problem you think ???

Omar Sammak said:
i did exactly the same what they said ... makes Y cable and make sure that its work ... copy the SCHUIMG.NBH to memory card "i ever tryed different ways" ... but its still the same result thats its stuck in USB host mode..
nothing happen
where is the problem you think ???
Click to expand...
Click to collapse
Try this, these are problems that usually cause it to get stuck in USB host mode
Sometimes if the Y cable is too long in length it won't work properly in transferring the data.
There are 2 .nhb files, so make sure your downloading the correct .nbh file (ruu_signed.nbh) and rename the ruu_signed.nbh to SCHUIMG.nbh Has to be capitalized letters when renaming the file.
Make sure the correct ends are plugged in where they should be.
Sometimes the camera button will get stuck in and prevent the device from flashing correctly.
Make sure the SD card is wiped clean and place the file inside the SD card and patch it with the goldcard tool.

xdrc45 said:
Try this, these are problems that usually cause it to get stuck in USB host mode
Sometimes if the Y cable is too long in length it won't work properly in transferring the data.
There are 2 .nhb files, so make sure your downloading the correct .nbh file (ruu_signed.nbh) and rename the ruu_signed.nbh to SCHUIMG.nbh Has to be capitalized letters when renaming the file.
Make sure the correct ends are plugged in where they should be.
Sometimes the camera button will get stuck in and prevent the device from flashing correctly.
Make sure the SD card is wiped clean and place the file inside the SD card and patch it with the goldcard tool.
Click to expand...
Click to collapse
*for long cable .. i made it short from the first
*the Fireware : 2250.21.51201.708 ..... i used this .nbh from those Rom " "RUU_Schubert_HTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U" and this "RUU_Schubert_hTC_Asia_WWE_1.57.707.02_Radio_5.52.09.16_22.33a.50.10U"
i did the coldcard for the memory and i get the CID and its all ok .. i used coldcardtool and batched the memory card and i resive the msg said its ok
hehehehe i m about to giving up
oh .. i will try another memory card reader tomorrow and i will let you know what will happen

Omar Sammak said:
*for long cable .. i made it short from the first
*the Fireware : 2250.21.51201.708 ..... i used this .nbh from those Rom " "RUU_Schubert_HTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U" and this "RUU_Schubert_hTC_Asia_WWE_1.57.707.02_Radio_5.52.09.16_22.33a.50.10U"
i did the coldcard for the memory and i get the CID and its all ok .. i used coldcardtool and batched the memory card and i resive the msg said its ok
hehehehe i m about to giving up
oh .. i will try another memory card reader tomorrow and i will let you know what will happen
Click to expand...
Click to collapse
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
i just bought a micro sd reader "just micro sd not the multi" and its worked correctly
update in progresses
at first Rdio - ok and restart
bootloader - ok .. its takin a while
Update Complete
Update SUCCESS
hurrrrrrrrrrrrrrrrrrry :victory:
thanks man you r the best :highfive:

Omar Sammak said:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
i just bought a micro sd reader "just micro sd not the multi" and its worked correctly
update in progresses
at first Rdio - ok and restart
bootloader - ok .. its takin a while
Update Complete
Update SUCCESS
hurrrrrrrrrrrrrrrrrrry :victory:
thanks man you r the best :highfive:
Click to expand...
Click to collapse
Awesome man... Glad I could be of help!
Follow Shadows to downgrade SPL, flash XSPL and install a custom rom... SPL has to be at or below 3.xxx to install RSPL or HSPL then you can flash a custom rom.

xdrc45 said:
Awesome man... Glad I could be of help!
Follow Shadows to downgrade SPL, flash XSPL and install a custom rom... SPL has to be at or below 3.xxx to install RSPL or HSPL then you can flash a custom rom.
Click to expand...
Click to collapse
ya i did that and now its coocked
but i m hesitate which Room to install ... Deepsharing or Nextgen ... whats better you say ??!!

Omar Sammak said:
ya i did that and now its coocked
but i m hesitate which Room to install ... Deepsharing or Nextgen ... whats better you say ??!!
Click to expand...
Click to collapse
There both great roms and there both on the 8779 build... I'm a huge fan of the Deepshining rom though, it has some cool extra features and the new USB video output.
Did you install RSPL or HSPL? If you installed HSPL all you have to do is enter bootloader mode and flash the rom, so it's really easy to switch from one rom to another if you want.

xdrc45 said:
There both great roms and there both on the 8779 build... I'm a huge fan of the Deepshining rom though, it has some cool extra features and the new USB video output.
Did you install RSPL or HSPL? If you installed HSPL all you have to do is enter bootloader mode and flash the rom, so it's really easy to switch from one rom to another if you want.
Click to expand...
Click to collapse
i installed the two ... but i notested that Deepsharing 7 is not established dont know why .. digital power is not working well even when i restart my phone ant rooted the phone and usb video didnt work
so i returned to Nextgen v3 its lighter and stable