Hello All,
I have tried to update my captivate on gingerbread via this guide.
http://www.addictivetips.com/mobile...-3-gingerbread-firmware-on-samsung-captivate/
All is going well and odin was updating the firmware then suddenly my phone screen goes white and odin is stucked at the progress. After waiting 20 mins I uplugged the phone and after that my phone is not turning on nothing is happening and its seems like its dead. Any solution or help in this ?
Thanks in advance.
Imran
Make a jig using this guide. It's not exactly easy but it should get you into download mode again so that you can reflash the stock firmware and start over.
will this work ?
as some told me to buy this from http://usbjig.com/ but they stated on the website " As long as there is something on the screen, the jig should work for you. " and I contact that guy and he said me that it will not work for you as my phone is not giving any response.
if I understand this correctly, if your phone stopped responding while odin was flashing the bootloader files, your phone is likely dead in the water. If it is, then a jig will not help.
Just a question did you try pulling the battery, then try again. I was flashing kf1 one time and it said completed successfully but it was an all blank screen luckily it was dark and there was just 1 tiny pixel lit up still pulled battery inserted battery held vol+ and vol- inserted usb and odin detected.
Sent from my SGH-I897 using XDA App
Related
Anyone Experience this?
Phone was on stock firmware from AT&T (never been rooted)
Plugged Phone Into the computer & opened Odin3Excution v1.00 & booted the phone into Download Mode and clicked Start on Odin. looked back at the phone minutes later and the phone had a full green screen. waited & waited and neither the phone or Odin were making progress. pulled the phone off the USB pulled the battery. restarted the computer and tried again. Now the phone will not boot at all not even the at&t smart phone screen and it wont boot into recovery or download mode.
The phone is being processed through warranty, I was just wondering if anyone had any experience with this or knows what happened. Thanks!
BTW the phone was charged 100% and the sim & sd card werent in the device.
Move to Question Thread
Can a Admin move this to the question section. Sorry for posting in Dev.
Very interesting. Never heard of this. Pull the battery out and wait lets say 1h
Then plug the battery back and hold both volume buttons while inserting the USB. Dont touch the power button.
icezar1 said:
Very interesting. Never heard of this. Pull the battery out and wait lets say 1h
Then plug the battery back and hold both volume buttons while inserting the USB. Dont touch the power button.
Click to expand...
Click to collapse
Will do. Thanks. Any One else?
jdubdieslo said:
Will do. Thanks. Any One else?
Click to expand...
Click to collapse
You can try not waiting at all at first. Just pull it out, put it it and follow what I said earlier.
i had a green screen in the middle of a flash back to stock with ODIN one click (every usb device stopped working on my machine at once)
fired it back up in download mode and odin'd it...no problem
Yep.. Mine too, two times, except that the screens was Light Blue and Yellow..
Moved to Q&A.
Lol funniest thing that I read this thread and then thought, wow must be one of the lucky one's cause that never happened. Next thing i know I go to flash back to stock and when i look over it was the green screen. I was like NOOOOO! So now im trying to install the drivers on my bro's comp since my windows partition is being a...well you know. Tried to use heimdall but I don't have the stock bootloader....just the sbl. Can anyone throw me a bone?
tytdfn said:
Lol funniest thing that I read this thread and then thought, wow must be one of the lucky one's cause that never happened. Next thing i know I go to flash back to stock and when i look over it was the green screen. I was like NOOOOO! So now im trying to install the drivers on my bro's comp since my windows partition is being a...well you know. Tried to use heimdall but I don't have the stock bootloader....just the sbl. Can anyone throw me a bone?
Click to expand...
Click to collapse
Advice, if you don't wanna risk it, find a win machine and use odin one click downloader
Sorry to resurrect and old thread, but it was either this or start a new thread for the same problem.
I was flashing back to stock from Mosaic and this happened. Green screen and nothing else. Now it won't turn on or go back into download mode. Think a jig will help this?.
Edit: Waited about 10 mins and tried again. IT LIVES!!!!
it is worth a try of jig if key combo does not work.
the same thing just happened to me. i was using odin3excution v1.00 to flash back to stock before taking the phone in to AT&T to get the warranty replacement. i got the teal/green/blue screen at factortrfs, it just sat there and killed everything usb on my computer. i pulled the battery and tried to reboot into download/turn it on/plug it in, no response whatsoever. i have the battery pulled and im waiting to try again, but if that does nothing, what can i do? i could take it in and tell them it did this in the middle of the kies update, but is that even believable? any help is appreciated, i don't have a jig and making one is last resort. thanks brothersss
I've been browsing for a while all over google and this site and still can't find anything that can help me so I'm asking.
I'm a basic Captivate user with no experience with flashing and rooting, but I saw Serendipity7 and thought the instructions were simple enough to follow on the weebly site. I downloaded the ROM files and the Installation files and extracted them. I followed the instructions perfectly by installing the drivers for my phone, opening Odin3 1.7, selecting the PDA, PHONE, CSC and PIT files then put my phone in download mode. I waited for the ID:COM to pop up then hit start. The blue bar on my phone and the one in Odin started working for about 30 seconds to a minute, not even the first box was done, then my phones screen turned straight blue, and Odin3 said it failed. The popup in the corner of the computer screen then said that my phone is no recognized for some reason.
Now my phone opens to the boot screen that says
"GALAXY S
gt-i9000
SAMSUNG"
and it just sits there. I can't get into download mode, and when I plug it to charge the screen with the battery level freezes and sits there.
Can somebody help me? I am a serious noob here that assumed simple directions were easy to follow (who knew they weren't?).
Thanks a million
Looks like Odin failed(again) you need to try to get into download mode again. Might need a jig.don't ask me about the jig tho cause i never had to use one. And I got mine when it came out.
Sent from my SGH-I897 using XDA Premium App
That happened to me once after flashing Firefly. Because we had a postal strike at the time I couldn't order one but I followed this guide and made my own and it worked perfectly. http://forum.xda-developers.com/showthread.php?t=819551
Yea, just try to reflash. There are 3 ways to get into download mode again. See this post. Number 3 always worked for me the best.
http://forum.xda-developers.com/showthread.php?t=819105
If you keep having problems with Odin, try Hemidell.
http://forum.xda-developers.com/showthread.php?t=1191094
You have I9000 bootloaders pull the battery reinsert and download mode should be volume down and power no usb cable insertion needed...
Yea you're definitely gonna be able to fix that quickly. Redo flash get into download mode either holding down volume down and inserting usb or hold down and hit power.
Sent from my i897 running MIUI 1.8.12 with TalonMTD kernel.
Were the GB bootloaders even installed?
Sent from my GT-I9000 using XDA App
Thanks everyone who helped out, one thing tho...
None of the key combos are working for me so I'm just gonna us the jig fix to get into download. I know I need to use a 300k ohm resistor but does it matter if I use a 1%, 2% or a 5% resistor?
Thanks again
^ I've used 1/4 watt 5% tolerance with success.
Ok I did something stupid with my Galaxy S. I didn't pay attention to the firmware I was downloading i did a search for orange branded i9000 Firmware, and was downloaded from a site. Legit firmware and all. So I went to flash with odin like I have done lots of times. Came up fail, so I figured something happened during transfer, so restarted it back into download mode and reflashed again. FAIL again. Restarted and it would not turn back on. The unfortunate to all this is, the firmware after looking in horror at my galaxy s and looking back at the screen said I9100 above and I did not see that at all.
Sooo even with a USB jig this will not show a download menu, no recovery mode, no screen when plugged into charger. Anyone have any tips before I attempt the unbrickable mod?
post you question on darky rom forum they might b able to help
If even the Jig does not work i would try the unbricablemod. I dont't know an other solution to revive your phone than the UnbrickableMod if your phone doesn't boot into the Downloadmode with a Jig. So you have nothing to loose just try this Mod.(it could be your last hope to rescue the phone without sending the phone to Samsung) I didn't try it yet because i ever could revive my phone with the Jig but I've read some reports in a german forum and the users there are reporting that the Mod does rescue the phone even if the Jig doesn't boot your phone in Downloadmode.
You can find the unbricablemod i'm talking about here. http://forum.xda-developers.com/showthread.php?t=1153310 It's called "one click-unbrick". Just follow the given instructions and your phone schould work as before
Is your phone really bricked?
Is your phone bricked, or is it stuck at boot???
Normally, if a phone gets bricked, you see the screen of death: a phone logo and a computer logo, with an exclamation mark in between the two...
By the description, it looks like your phone is not able to boot, and is stuck at the screen, where it says: i9000
try putting it in downloading mode, and use odin to go back to stock firmware....
If you can't even turn on your phone, maybe your battery is flat after all that flashing
nwsk said:
If you can't even turn on your phone, maybe your battery is flat after all that flashing
Click to expand...
Click to collapse
^^^ That may be the case, try to get another battery or chargning this batter outside the phone (wire to to a 5v source).
Sidenote: I think that download mode draws power from the usb (the phone will stay on even if the battery is removed [at-least mine does])
If the jig does not work then you probably flashed the bootloader or something...which is bad, in that case, unbrickable mod may be your only hope.
I revived it with just the software version of the unbrickable tool. Only have like 2 seconds to do it in linux when you connect the phone, but it put it into a white screen and I flashed with heimdall and I am back up and running. Thank you all!
so you flashed a stable ?
Yep I posted stable. It's weird because if your device shows up in windows some weird device you only have have a couple seconds in linux to make it flip into download, but its doable and I didn't have to hardware mod anything. Back to a perfectly working Galaxy S
Good for you !
You did it well, nice one! ;-)
I was to about to ask you to check your battery but glad you fixed it
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
You can check if it is in download mode by pluggin it in pc with odin. See the wiki page what it says about soft brick.
Soft-Bricked
After flashing a rom you might not be able to enter the Download Mode by pressing Volume Down + Home + Power. In this case a so called 'JIG' would be helpfull.
You could build it on your own: [HOWTO] [REF] Get Download Mode without 3-button combo using homemade JIG
... or buy a preassembled one on a well known marketplace.Hint: There is no difference between a JIG for Samsung S/S2 or S-Plus.
See if you can go into d0wnload mode with vol down home and power. If that works go and try to find the stock firmware for the phone and download and extract. Download odin and put csc pda and phone/modem in there rightful places. 512 pit in pit section. Pit usually comes with odin download. If not find it somewhere. Repartition checked and hit start. It should reboot when done. It will problaby take a couple of min to boot but be patient. If it starts to go into boot loop put back into download mode again and reflash. Its very hard to mess up the phone to where you cant fix it. So relax and watch tuts or whatever helps you best. I know of a link i that i will find and post for you when i do.
Sent from my GT-I9000 using XDA
http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using XDA
DEAD bricked phone
So, my friend's phone (hopefully she'll stay my friend after this) was turning itself on and off all on it's own. So I (no good deed goes unpunished) suggested that I will upgrade her firmware for her. She had 2.3.3 firmware. I downloaded the odin1.7 as well as a package of all the info for 2.3.5 firmware upgrade. I flashed the phone- originally only using the PDA option with a file called: CODE_I9000XXJVS_CL565837_REV03_user_low_ship
It worked, the phone restarted and showed the firmware as being 2.3.5.
I don't know why, but I thought it would be a good idea to update the CSC and the pit and the modem as well- so I did that. when this was finished - though odin said that the flashing was successful the phone is completely unresponsive. The computer doesn't recognize it, it doesn't show any signs of life at all- like it's in the dark ages and there is no electricity in it.
HELP!!!
First question: do you think a jig will work? how dangerous is it?
second question: is there any other option to try that I haven't come across other than changing the motherboard, and if there isn't do you know where I can get one, bear in mind I live in Israel.
Please e-mail me a copy of the response to [email protected] if you can...
Odin dosnt pick it up atall plus the batteries dead aswell now and the stupid thing wont charge so i cant evan try any thing till i find away or some one to charge it but thanks for the tips.
gavster26 said:
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
Click to expand...
Click to collapse
Try to recharge the battery from other phone or use another battery.
Check whether you have the download mode working. (Home+Power+Volume down)
If yes, put phone in download mode and flash Darky RE or any other Rom via ODIN. Try to get the recovery mod after rooting and then try ROMs.
Or try restarting the phone it may work without update also. Long press power in download mode restarts the phone. However be careful.
What is the status of the device can you go to download mode
Post your firmware files name and how you choose in the odin flasher.
Dont try anything crazy you will bricked your device more:banghead:
Sent from my GT-P1000 using XDA
Alternate way to Download mode
Hi gavster26
I have been there with a buddy's phone... not a nice place.
Found a link showing this other trick ... but you have to trial and error this one on the different combos:
1. Phone off
2. USB cable pluged in
3. Odin running
4. Down (or Up - test both) Volume button + Home button + plug in the USB cable.
This booted my dead "bricked" phone into download mode.
Try it.
Hi, I've recently come across some trouble with my friend's captivate...(I, myself, own a Vibrant and have been an active flasher for the 2 years I've had it)
I was trying to get gingerbread bootloaders when I realized I was not on a stock 2.1/2.2 rom(I was on a 4.0 rom) and it ended up bricking my phone.
Fortunately I could still enter download mode and I then proceeded to odin back to stock JF6 firmware when I found myself waiting over an hour for the process to complete(the bar did not move at all on odin), so I decided to pull the plug and that's where everything went wrong. I've tried entering download mode but absolutely nothing happens.
TL;DR Version: Cannot enter download mode, complete black screen(No phone icon, no code, nothing)
I was wondering what the Captivate community suggests what I should...
Should I perhaps stop by Radioshack tomorrow and try this cheap jig process?
http://www.youtube.com/watch?v=D0aoabVtPJ8
I would appreciate anything to get this device back to life right, thank you all for your time.
If u do have some signs of life, like when u plug it into a wall charger, then a Jig should work. But if no signs of life, then it probably is a hard brick. And if so, then check out mobiletechvideos.com for the repair.
Sent from my SGH-I897 using xda premium