Related
Hi Guys,
Really struck in big muddle. Need help. I due to some stupid mistakes have ended up in bootloop on my Note. I was earlier having Rocket Rom v22 and then yesterday directly flashed the Rocket Rom ICS Beta V1.4. The rom was giving me FC everywhere. I had cleared and wiped and followed everything to the dot but missed one step. I haven't first flashed with the leaked chinese ICS rom repacked by Chainfire so was struck with all sorts of force closes on dialer. And cannot even update to v1.5 to fix everything.
Now i guess another mistake i have done was going ahead and flashed the stock rom by Odin PC.
N7000XXKL3 ------ 2.3.6 2011 December-------- N7000ODDKL1 --------------------India -----------------------------
And the phone is now struck in bootloop
Any Help Please.....dire need of it !!
go to recovery
Wipe cache n wipe data
if req, reflash same indian ROM with PC odin
dr.ketan said:
go to recovery
Wipe cache n wipe data
if req, reflash same indian ROM with PC odin
Click to expand...
Click to collapse
Woooohooo.....done....thanks so much.....thats why XDA rocks....it solves all your problem.
Infact i have cleared the cache and data.....but after that i was apprehensive about flashing the rom again. But it worked thanks again
Make sure to wipe data and cache when you Odin!
Sent from my GT-N7000 using xda premium
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
What process are you using to flash paranoid rom?
chochweet said:
hi
i m not able to install paranoid (any version) on my galaxy note... but rest of the custom roms are working fine...
everytime i install paranoid rom, it gets struck at the boot samsung logo and i cant even access to cwm recovery..
then the only option left for me is to revert back to stock 2.3.6 via odin and then root
is there any developer or expert who can rectify the problem so that i may be able to install paranoid on my note
Click to expand...
Click to collapse
Can you provide more info, what kernel and rom are you using to flash PA?
Hi
I tried it from ics (crash v8.1, liquid black 3.2, criskelorom v9, fusion Tom 2.5, rocket Tom v10) ........ no result
I tried it from the gb 2.3.6 (stock).... no result
I used clockworkmod recovery... abyss kernel
Everytime the same problem hung on the boot logo... and no access to clockworkmod recovery....
Sent from my GT-N7000 using xda app-developers app
Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note
Att.Fan1982 said:
Go back to gingerbread, root and install clockworkmod, put the pa ROM & gapps zip on your sdcard then go into recovery (cwm) factory wipe data 2-3 times, flash ROM then gapps next wipe cache 2-3 times, finally reboot and wait.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Do I need to install abyss kernel to format and wipe or the native 5.0.2.7 recovery is enough.. and is it safe to wipe cache,format factory reset in stock 2.3.6 by cwm recovery 5.0.2.7
Sent from my GT-N7000 using xda app-developers app
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
Ok let me try
I will let u know about the progress
Sent from my GT-N7000 using xda app-developers app
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
done .... flashed stock 2.3.6 gb rom... flashed cwm recovery and did the same as u told me to do... but again struck on the boot screen logo...
i cant access recovery but can still access download mode....
even i cant understand where is the problem why paranoid is not working on my note.....confused
can i try installing paranoid without installing gapps..... will that work or not?
when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?
Att.Fan1982 said:
It's safe to wipe using a gingerbread kernel in recovery which is exactly what abyss is, a gingerbread kernel. No need to use abyss if you're already on a gingerbread stock ROM.
Sent From An Awesome Jelly Bean Galaxy Note
Click to expand...
Click to collapse
rraaka said:
when you were on GB stock without rooting did you boot into recovery and wipe data, cache ?
( vol up + home + power ) buttons in combination together take you into recovery. you have to keep pressing till N7000 logo shows up, then u let go and then recovery appears
If you already know and done it then im sorry to repeat.
what method you followed to root GB ?
Click to expand...
Click to collapse
i used CF-Root-SGN_ZS_MUL_KK1-v5.0-CWM5.rar to root and install recovery...
if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....
rraaka said:
if you are still on this recovery, get into recovery and wipe data, cache, (advanced ) --- dalvik
give the names of the rom files you have downloaded to flash....
Click to expand...
Click to collapse
190712-102621-STAXXTANIUM-v17.zip
paranoid_note_v05.zip
paranoid_note_v04a.zip
nothing is working
and when i try to install
crashrom
criskelrom
liquidblack
etc
they work fine...
its only when i try to install paranoid i get this problem.... cant understand y
there is one difference is paranoid and other roms is size... paranoid is abt 130mb but rest of the custom roms are 700 to 800 mb
your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?
rraaka said:
your present status is this right ? - GB 2.3.6, rooted with cfroot, phone compltetly booted and working fine ?
you can get into recovery ?
Click to expand...
Click to collapse
yes working absolutely perfect... and recovery is also acccessable...
stock and all other custom roms are working
only problem when i try to install any damn version of paranoid
you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
if this doesnt work ill tell you a method using CM9 safe kernel tar ( give me some time)
rraaka said:
you must keep gapps ics ready for flashing with PA v0.4a,
keep both zip files on sd card
get into recovery, wipe as told before
install zip from sd card ( remember the name and keep looking till you find it ) choose zip file,, flash it,
then same thing with gapps , flash
do the wipes again
then reboot phone ( first boot takes time so be patient )
you can use the present recovery or flash abyss kernel - --go to advanced -- reboot recovery ...etc etc ( same proceedure)
Click to expand...
Click to collapse
i have already tried this procedure so many times, but everytime after finishing installation, rebooting the phone and damn its struck again at boot logo.....
i think its the kernel and recovery which gets erased during the installation of paranoid thats y it gets struck at boot logo
Maybe you have a corrupted download. Check md5 sum to verify.
sahilarora2003 said:
Maybe you have a corrupted download. Check md5 sum to verify.
Click to expand...
Click to collapse
i verified all the zip files (roms) i downloaded..... everything is just fine
chochweet said:
i verified all the zip files (roms) i downloaded..... everything is just fine
Click to expand...
Click to collapse
Do these steps and let me know if its still there.
As I know you are on Rooted GB rom right now.
So Reboot into recovery
Full Wipe
Reboot Recovery
Go to Mounts and storage
Mount system
mount cache
mount data
Format data
Format system
Format Cache
Reboot Recovery
Now
Flash Paranoid Rom
Flash Gapps
Now Again Full Wipe
Reboot System
C if it works
Cheers
Hey everyone.
I am running stock ics 4.0.3 , with Hydrocore kernel also my device is rooted and have CWM mod.
Im just wondering how i go about getting Android 4.1.1 Jelly Bean via ParanoidAndroid custom ROM.
Using the download off the rom on the site:
http://www.androidauthority.com/gal...-4-1-1-jelly-bean-paranoidandroid-rom-116835/.
Any help is appreciated thank you.
Nazeiro said:
Hey everyone.
I am running stock ics 4.0.3 , with Hydrocore kernel also my device is rooted and have CWM mod.
Im just wondering how i go about getting Android 4.1.1 Jelly Bean via ParanoidAndroid custom ROM.
Using the download off the rom on the site:
http://www.androidauthority.com/gal...-4-1-1-jelly-bean-paranoidandroid-rom-116835/.
Any help is appreciated thank you.
Click to expand...
Click to collapse
Since you are on Hydracore it is safe to wipe. But just to be sure just take a nandroid backup, by Booting in to recovery
Selecet Backup & restore--> Select Backup & do a nandroid backup Then just follow the installation procedure below
Keep both the ROM & Gapps file on your SD card
Wipe data / factory reset
Wipe Cache Partition
Go to Advanced - > Wipe Dalvik Cache
Select Install Zip from SD Card--> Select either internal card or SD card (external sd ) based on where you kept the file-->Install the zip file of the ROM
Same way Select & install the Gapps package
Go Back & wipe Cache Partion & Dalvik Cache once again
Reboot & you are Paranoid...:good:
the best advice I can just offer you is to go to the respective Paranoid Android ROM thread and post this question there. There many people there as well willing to help you. Or you can wait for someone who has PA already on their device and perhaps they can give you some nice info on how to go about installing PA on your phone.
sorry, I can't do much help on you as I'm not using JB for now.
You can flash any custom rom if you are on safe kernel, hydracore is safe and you can simply boot into cwm recovery and flash the rom zip followed by gapps.
Help i am stuck on the PA logo
singh.harvinder said:
You can flash any custom rom if you are on safe kernel, hydracore is safe and you can simply boot into cwm recovery and flash the rom zip followed by gapps.
Click to expand...
Click to collapse
My phone is now stuck on the boot logo for paranoid androd. How do i fix this , it will not boot?
You havent done full wipe or wiped cache/dalvik, probably.
Skickat från min GT-N7000 via Tapatalk 2
Do i need to...
Utacka said:
You havent done full wipe or wiped cache/dalvik, probably.
Skickat från min GT-N7000 via Tapatalk 2
Click to expand...
Click to collapse
I wiped the wiped both of the cache including the dalvik , i havent wipe/factory reset my phone , do i need to do that?
Nazeiro said:
I wiped the wiped both of the cache including the dalvik , i havent wipe/factory reset my phone , do i need to do that?
Click to expand...
Click to collapse
Yes you need to factory reset when coming from another rom that is not aosp based, i.e stock gb/ics.
Skickat från min GT-N7000 via Tapatalk 2
Nazeiro said:
My phone is now stuck on the boot logo for paranoid androd. How do i fix this , it will not boot?
Click to expand...
Click to collapse
I think you need to read instructions to the point before carrying them out. I had posted you the method for installation of PA which so far as I know is the correct one coming from any non AOSP based ROM. Pls. do follow the instructions. In case you are in doubt just ask for a reconfirmation.
Also any ROM developer will have the instructions posted in the OP thread, which you should definitely follow.
As others have told you, do a full wipe coming from a non AOSP based ROM..
By the Way if your problem is solved just change the OP title to Solved..
In regards to doing a full wipe: When doing the same process a couple of weeks back, coming from a stock ICS rom to PA i read you need to do a full wipe.
google brought me to this page: http://checkrom.com/threads/full-wipe-the-correct-way.432/
do you guys consider wipe/factory reset to be sufficient or is it a good idea to do this manual format of the /system/ /data/ and /cache/ partitions as per the above guide?
I was in a bit of doubt on that one at the time, so i did it anyway to be on the safe side and it all worked fine.
Paranoid android
Hey :laugh:
Someone can tell me what's the difference between the Paranoid rom from Imilka (PARANOIDANDROID 2.1 http://forum.xda-developers.com/showthread.php?t=1797698) and the Paranoid rom from Utacka (PARANOIDANDROID 2.15 http://forum.xda-developers.com/showthread.php?t=1871713)????
To be sure
OK, just to be sure I want to make everything straight... So if a have Hydracore kernel and a non-AOSP rom (for example ClassicRom V5) I can flash ParanoidAndroid? Even without AOSP rom? Just having Hydracore kernel and non-AOSP rom I can install ParanoidAndroid safely? I just have to do a Full wipe, then flash paranoid, flash Gapps, wipe cache and dalvik and reboot and thats it? Thanks in advance for the answer
kokodv said:
OK, just to be sure I want to make everything straight... So if a have Hydracore kernel and a non-AOSP rom (for example ClassicRom V5) I can flash ParanoidAndroid? Even without AOSP rom? Just having Hydracore kernel and non-AOSP rom I can install ParanoidAndroid safely? I just have to do a Full wipe, then flash paranoid, flash Gapps, wipe cache and dalvik and reboot and thats it? Thanks in advance for the answer
Click to expand...
Click to collapse
yea, hydracore is safe, flashing using hydracore is safe
Skickat från min GT-N7000 via Tapatalk 2
So, it`s my first custom rom so i don't have any experience with it, so yes, i'm a noobie.
I've seen the ICS 4.0 Sources Out thread for a while and when i saw the CM10 release by arcee i decided to give it a try
but got stuck on LG boot logo.
What i did:
1. install cwm recovery v4.0.0.5
2. wipe data/factory reset
3. wipe cache partition
4. install cm-10-20121030-nightly-p990.zip (success install)
5. reboot system now
Then it get stucked at the lg logo... i can acess the cwm and try to reflash the ROM... but it'll get stuck at the same logo
Any solution?
Thanks
EDIT1: Ok, i just flashed a stock rom and it worked... now i'm on stock gingerbread 2.3.4, any tutorial to install cm10?
Thanks a lot... i just tought i bricked my phone
Javiern said:
So, it`s my first custom rom so i don't have any experience with it, so yes, i'm a noobie.
I've seen the ICS 4.0 Sources Out thread for a while and when i saw the CM10 release by arcee i decided to give it a try
but got stuck on LG boot logo.
What i did:
1. install cwm recovery v4.0.0.5
2. wipe data/factory reset
3. wipe cache partition
4. install cm-10-20121030-nightly-p990.zip (sucess install)
5. reboot system now
Then it get stucked at the lg logo... i can acess the cwm and try to reflash the ROM... but it'll get stuck at the same logo
Any solution?
Thanks
Thanks
Click to expand...
Click to collapse
Wipe system also then try.
Sent from my LG-P999
how?
cricketAC said:
Wipe system also then try.
Sent from my LG-P999
Click to expand...
Click to collapse
How i do that? i don't see that option on cwm recovery
"
-reboot system now
-apply update from sdcard
-wipe data/factory reset (that's the one i used)
-wipe cache partition
-install zip from sdcard
-backup and restore
-mounts and storage
-advanced
-power off
-go back
"
EDIT1: I tried to format /system but it says "unable to mount"... mount doesn't work either
EDIT2: Backup file it isn't working... totally f***** up
1: wipe data/factory reset
2: wipe cache
3: advanced>wipe dalvik cache
4: mounts n storage>format data, format cache n format system
this is what is meant by full wipe
5: install CM10
6: install latest gapps package for jb
7: reboot system
this should work
Hey,
This helped for me: (no bugs for now)
-Nvflash to original GB rom from lg
-rooted the device
-installed cwm
-flash cm7 (latest nightly as recommended fom ricardo for the bootloader etc)
-installed gb gapps
-installed first cm10 nightly
everything workes fine so far
I came from the cm9 paranoid build
I also wasstuck at the logo both with cm7 and 10
hope it'll help you
Sent from my LG-P990 using xda app-developers app
zxr72 said:
Hey,
This helped for me: (no bugs for now)
-Nvflash to original GB rom from lg
-rooted the device
-installed cwm
-flash cm7 (latest nightly as recommended fom ricardo for the bootloader etc)
-installed gb gapps
-installed first cm10 nightly
everything workes fine so far
I came from the cm9 paranoid build
I also wasstuck at the logo both with cm7 and 10
hope it'll help you
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
I just did almost the same thing, just didn't flash cm7
working now... CM10 is soooo smooth
any bug? i don't get the vibration bug, clock FC or the non see External SD
all is working great... wow
Thanks for the help
What am I doing wrong?
Hi!
I never used CM7 or any custom rom.
I had 20s flashed via kdz.
I'm root. I installed ClockWorkMod recovery 4.0.0.5 and made clean cache, wipe dalvik etc.
I installed CM10 from zip (it only took a few seconds!) and rebooted. It showed two LG logos and never passed that.
I kept reading and saw this thread so I used smartflash to go back to FROYO, rooted, installed CWM and installed the last CM7 nightly (only a few seconds!) and rebooted.
All I get is a static LG logo and nothing else. I don't know what to do!
Thanks and sorry about my english!
1. NvFlash to 10b
2. Smart flash to latest stock ROM for your country
3. Rooted
4. Install ROM manager
5. After install ROM manager, open it
6. Install CWM v.6 through ROM manager
7. Boot into recovery
8. Wipe data, wipe cache, wipe dalvik-cache, wipe battery stats
9. Install latest cm10 nightly through install zip from SD card
10. Install gapss through install zip from sd card
Sent from my LG-P990 using xda app-developers app
ardiade said:
1. NvFlash to 10b
2. Smart flash to latest stock ROM for your country
3. Rooted
4. Install ROM manager
5. After install ROM manager, open it
6. Install CWM v.6 through ROM manager
7. Boot into recovery
8. Wipe data, wipe cache, wipe dalvik-cache, wipe battery stats
9. Install latest cm10 nightly through install zip from SD card
10. Install gapss through install zip from sd card
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
How do I install Nvflash? I have found tutorials for it but they are for the g2x. Will it still work?
I bought an o2x to replace my sgs1 which is great with cm10.
My story:
Phone was used and bone stock with froyo and 725bb
Rooted
Installed rom manager then flashed cwm 6.0.1.5 from rom manager
wiped everything
installed latest CM7
usb mass storage stopped working (was working with stock froyo)
copied latest cm10 nightly and gapps to an sdcard
wiped again
flashed cm10 and gapps
now I'M stuck on cyanogenmod logo and the lower buttons are lightning
repeated the process few times and still stucked at cm logo
Any ideas? Thanks!
*Update* Removed the battery and restarted the phone and now it seems to be working!
I own a Samsung Galaxy Ace S5830 running on android 2.3.6 with build number GINGERBREAD.DDKQ8.I successfully rooted my device(SU icon in the app drawer), flashed cwm5.0.2.6 with no error.
I flashed gingercruzt 2.2, cm 7.1,7.2,9,10 with the following instructions:
1) Wipe data/factory reset
2) Wipe cache partition
3) Under advanced, wipe dalvik cache
4) Flashed the rom.
After rebooting for the first time, this happens(for every rom I tried):
The phone boots into the rom(the capacitive buttons get turned on) -> setup window is reached -> then the phone starts booting again->in further boots it reaches cm logo only and keeps on booting again and again.
I tried wiping data, cache partition, dalvik cache and reboot. None of it worked.
I flashed the roms again .But still stuck at bootloop.
Ps : I randomly took my sim out and did a complete wipe and the roms work fine!!!.
But with sim again, the same problem persists.
PLEASE HELP.THANKS IN ADVANCE.
If you have installed any custon rom previous than i suggest you to first flash fresh ddkq8 stock and than try to install ur custom rom..
It might be happening because of previous rom data !
Sent from my GT-S5830 using xda app-developers app
gb2793 said:
I own a Samsung Galaxy Ace S5830 running on android 2.3.6 with build number GINGERBREAD.DDKQ8.I successfully rooted my device(SU icon in the app drawer), flashed cwm5.0.2.6 with no error.
I flashed gingercruzt 2.2, cm 7.1,7.2,9,10 with the following instructions:
1) Wipe data/factory reset
2) Wipe cache partition
3) Under advanced, wipe dalvik cache
4) Flashed the rom.
After rebooting for the first time, this happens(for every rom I tried):
The phone boots into the rom(the capacitive buttons get turned on) -> setup window is reached -> then the phone starts booting again->in further boots it reaches cm logo only and keeps on booting again and again.
I tried wiping data, cache partition, dalvik cache and reboot. None of it worked.
I flashed the roms again .But still stuck at bootloop.
Ps : I randomly took my sim out and did a complete wipe and the roms work fine!!!.
But with sim again, the same problem persists.
PLEASE HELP.THANKS IN ADVANCE.
Click to expand...
Click to collapse
Problem could be your simcard? How is that even possible. Try flashing with your sim out then insert it after the rom is installed.
SuperAce609 said:
Problem could be your simcard? How is that even possible. Try flashing with your sim out then insert it after the rom is installed.
Click to expand...
Click to collapse
I tried this after discovering the sim "problem" but it didn't work out.
bhumit22 said:
If you have installed any custon rom previous than i suggest you to first flash fresh ddkq8 stock and than try to install ur custom rom..
It might be happening because of previous rom data !
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
When i flashed my first custom rom(cm 7.1), i was on fresh ddkq8 stock rom. But the problem still occured.
Though i will give it a try again.
gb2793 said:
When i flashed my first custom rom(cm 7.1), i was on fresh ddkq8 stock rom. But the problem still occured.
Though i will give it a try again.
Click to expand...
Click to collapse
It would be a great advisable idea if you flash stock rom via odin every time when you want to switch from one cusom rom to other...
Sent from my GT-S5830 using xda app-developers app
bhumit22 said:
It would be a great advisable idea if you flash stock rom via odin every time when you want to switch from one cusom rom to other...
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
as told by you, I flashed stock rom and then rooted my phone, installed cwm and then flashed cm9.
I am still stuck on the boot loop...
PLZ HELP
gb2793 said:
as told by you, I flashed stock rom and then rooted my phone, installed cwm and then flashed cm9.
I am still stuck on the boot loop...
PLZ HELP
Click to expand...
Click to collapse
Did you mount the /system? Sometimes you have to do this.
Boot into CWM, mounts and storage > mount /system
Check to see that everything is mounted, sd-ext may or may not work, don't worry about it, it's a big in most CM9 ROMs