So I have the bionic rooted, with Unleashed V1.0, and I want to update to 1.2, but I cannot for the life of me get into recovery. I have not uninstalled anything off this rom, and I noticed some really stupid stuff happening. Bootstrap is installed, and doesn't do anything but reboot the phone regularly. I installed Rom Manager, and same thing happens. So I uninstalled Rom Manager, retried Bootstrap apk, and phone reboot and magically rom manager is installed on my phone again?
I am at a loss of why I cannot get into recovery, and why apps are magically getting reinstalled when I have uninstalled them?
Try uninstalling the bootstrap apk. It worked for me, after some problems running rom manager. Hope this helps.
Related
Ok, so I rooted my wife's phone using this guide:
http://forum.xda-developers.com/showthread.php?t=583291
I seem to have gained root, however, I am getting this error when trying to use Titanium Backup:
BusyBox works but the 'su' command does not elevate to root....whoami...
I installed BusyBox through Titanium and through the market. I also installed Superuser through the market. Not sure where my error is/was, or how to fix it, does anyone have any ideas?
Everything went fine until the end, it did not reboot into recovery, but rebooted normally. I was able to get to recovery by powering on while holding the home button and was able to create a nandroid backup, so no problems there.
I'd like to be able to backup all of her apps before flashing a new ROM, but can't do so with Titanium before I figure out this error.
Will the issues above cause me any problems if I flash a 2.1 ROM, or will I be good to go, aside from having to re-install all of her apps?
Thanks.
So I had alot of issues rooting but im finally in, all rooted. Downloaded ROM Manager from the market and installed CWM. Says its successful, but when I manually reboot into CWM i get a error, so I cant install the 1.1 fix
Any ideas?
Really no one knows? This sucks!
This normally happens when recovery is not flashed properly. Did you try flashing again via Rom Manager? Also when you flash, does the screen show something like "Rom Manager has been granted super user permissions"?
ya, it flashes successfully through rom manager....
I think the problem is when I was trying to go back to 1.0.1 I flashed a restore through CWM. Then I whiped the /system and /data folders. The directions said to do this but I didnt realize I was supposed to do this BEFORE flashing not after. Basically I had no restore partition left so when I went and let it fail to boot 8x i got a error, and i had no OS. I ended up doing the N/Pwr, it restored, then i got a bootable CWM, booted into it and flashed the 1.0.1. But not everything seems, odd.
I can go into Rom Manager and install CWM fine, it says installation successful. But if I reboot into recovery, I get the error. I really need this fixed but im thinking it may be easier to just use a bootable CWM. Any ideas? I need to get 1.1 on here before I lose root
DroidHam said:
I think the problem is when I was trying to go back to 1.0.1 I flashed a restore through CWM. Then I whiped the /system and /data folders. The directions said to do this but I didnt realize I was supposed to do this BEFORE flashing not after. Basically I had no restore partition left so when I went and let it fail to boot 8x i got a error, and i had no OS. I ended up doing the N/Pwr, it restored, then i got a bootable CWM, booted into it and flashed the 1.0.1. But not everything seems, odd.
I can go into Rom Manager and install CWM fine, it says installation successful. But if I reboot into recovery, I get the error. I really need this fixed but im thinking it may be easier to just use a bootable CWM. Any ideas? I need to get 1.1 on here before I lose root
Click to expand...
Click to collapse
I fixed this by downloading the latest busybox from the market, installed it, then ran the "fix permissions" from Rom Manager. I then reinstalled the latest CWM, and it would allow me to reboot into recovery.
ClockworkMod: An error occurred while attempting to run privileged commands.
i've tried everything...that i know of or have read of so far...
i just cant get cwm to install
d1 rooted and unrooted thru super one click and z4root, rom manager uninstalled and redownloaded and reinstalled, wifi connected or 3g
su is current and shows list of other apps, tried permisions fix in rom manager too, just stuck w/ that same lousy error and cant install any roms...
some one please help me!!
-n
nutiket95 said:
ClockworkMod: An error occurred while attempting to run privileged commands.
i've tried everything...that i know of or have read of so far...
i just cant get cwm to install
d1 rooted and unrooted thru super one click and z4root, rom manager uninstalled and redownloaded and reinstalled, wifi connected or 3g
su is current and shows list of other apps, tried permisions fix in rom manager too, just stuck w/ that same lousy error and cant install any roms...
some one please help me!!
-n
Click to expand...
Click to collapse
You prolly fixed this already but in case someone else has this issue. Try installing Busybox from the market.
Same issue and won't boot into clockworkmod recovery
nutiket95 said:
ClockworkMod: An error occurred while attempting to run privileged commands.
i've tried everything...that i know of or have read of so far...
i just cant get cwm to install
d1 rooted and unrooted thru super one click and z4root, rom manager uninstalled and redownloaded and reinstalled, wifi connected or 3g
su is current and shows list of other apps, tried permisions fix in rom manager too, just stuck w/ that same lousy error and cant install any roms...
some one please help me!!
-n
Click to expand...
Click to collapse
I rooted my phone with eclair installed and used clockworkmod recovery with no issues until I one day wanted to go back to stock and attempted a restore of the backup I made right before flashing the OverStock ROM. The phone wouldn't boot, so finally got the Overstock to go back. Phone worked fine for the most part, but from then on to get into recovery mode, required shutting down and using button presses (Up/down vol/PWR button) and it would go in fine. Could never get Clockworkmod to go into recovery mode with a click. Saw that (finally) Samsung has published a Froyo update, so took back to stock eclair using ODIN3 so I could use Kies mini to update. Did a factory reset to remove all old info directories and data. Update went perfect, but want the option to use the rooted apps (Titanium backup and ClockworkMod--purchased apps) to play with my phone as I see fit. Used SuperOneClick to root phone and verified I can get superuser with using terminal emulator, successfully executing "su" command. Problem is I can't get into CWM recovery. Only get "Android system recovery <3e>". Tried uninstalling CWM and reinstalling. Re-Flashed CWM recovery and it lists version 2.5.1.2 as current and latest.
I obviously need CWM recovery to flash different ROMS, but wanted a current backup before starting. Can't get any further until I figure this out. Any help would be appreciated. I was a noob, just a month ago, but was feeling pretty confident until this happened. Guess I'm still a noob, but just a little more dangerous now. Thanks in advance.
Just noticed that I wasn't in a phone specific thread, so here's my phone details... Samsung Vibrant (T-Mobile).
CWM issues with Milestone
In the last update of the RomManager was added support for version ClockWorkMod 3.x for Milestone - but still unable to use the CWM as standard recovery.
Using another recovery as OR1.4 you can start CMW from the SD card - but that does not solve the problem of RomManager stay with completely limited functions.
The Rom Manager is having updates constantly and I think we have a working version for Milestone soon - but in part I'm upset to see that the Milestone is listed as a supported device - when in fact it is not.
I bought the full version of Rom Manager because I believe it is a great tool and I hope someday I can use all its functions.
I have the same problem. I use OpenRecovery for Sholes to do those things. I hope we can use those tools like a normal user even a day.
Hi,
I'm running CM7. I flashed first by downloading cm_p990_full-91 from rom manager. After installing it went into a boot loop, so I flashed update-cm-7.1.0-RC1-Optimus2X-signed from clockworkmod. Everything seems fine except market missing. I've tried flashing gapps-gb-20110613-signed several times from clockworkmod.
Please help
Install this with CWM it will then updates to 3.0.27.
Many Thanks
here is 3027, no need to let it auto-update and keep 2 copies on your phone ...
To start: yes I know there is already a "rom toolbox pro" thread, but this is addressing a different issue. I began using Rom Toolbox Pro to backup my apps. I am on N223. All of a sudden today after a reboot, it FC's. I tried wiping the data and uninstalling and reinstalling but to no avail. Just wondering if this happens to anyone else. (It started once but never started again)
ALSO: Titanium Backup. Whenever I try to backup my apps, it FC's??? Any ideas?
Did you try fixing permissions? I've had the best results by booting into recovery via Rom Manager. O/W you can also fix via Rom Manager and other apps.
No I havent. My NC is in the middle of a Nandroid backup because im about to start playing around with boot animations so I shall do it when Im done.