Hello,
The short story is that I have a Samsung Galaxy S. I wanted to install some new firmware ( and because Kies bricked my phone a few months ago ) with Odin.
There was a guide somewhere where they did a full factory reset with
*2767*3855#
After I entered the code I could not connect to the network anymore. And cannot make any phone calls or receive them.
I am in Romania, using Vodafone.
I also tried
*#272*[my IMEI]# and selected CNX and after it reboots it asks me if I'm using Prepay or Postpay. I chose Postpay and still nothing.
If I search for networks it finds all of them but I still cannot connect to any.
I entered *#0011# and this is what I get
UMTS : Limited
RRC State : IDLE
WCDMA 2100 Band 1
Reg PLMN 226-1, IsPCS? 0
FREQ DL : 10836
FREQ UL : 9886
CELL_ID : 0xc82811b
LAC : 0x7d16
PSC : 44
RSCP : -96, ECIO : -8
Click to expand...
Click to collapse
Tell me what I can try right now, or what information you need more from me.
Usually this means that there is something wrong with your APN settings, like they were erased.
Check out your APN settings and make sure they match what your carrier needs. If they aren't right or missing then you will indeed have network issues...
Sent from my MB860 using xda premium
ccrows : the APN settings seem to be fine. As far as I know the APN are for data networking ( internet ) and before if I had no APN set I could still call people.
Reset your apn settings!
Sent from my GT-I9000 using xda premium
BHuvan goyal said:
Reset your apn settings!
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I tried this but I cannot connect to the Vodafone network first!
hydrarulz said:
ccrows : the APN settings seem to be fine. As far as I know the APN are for data networking ( internet ) and before if I had no APN set I could still call people.
Click to expand...
Click to collapse
Your APN has nothing to do about whether you can call or not, it controls your data. You could have an empty APN and still make calls.
I really think something in your APN is messed up, but its kinda hard to tell without seeing the phone. Your symptoms do point to the APN.
The only other thing it could be is a bad modem flash. If you are sure that your APN is fine try flashing a different compatible modem in Odin again...
Sent from my MB860 using xda premium
I deleted all the APNs and I know that the network worked fine like this.
I will try flashing with a firmware that I know worked before and see what happens.
The wierd thing is that the problem appeared after I entered the factory reset code, not after flashing it.
Sent from my GT-I9000 using XDA App
hydrarulz said:
I deleted all the APNs and I know that the network worked fine like this.
I will try flashing with a firmware that I know worked before and see what happens.
The wierd thing is that the problem appeared after I entered the factory reset code, not after flashing it.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Hopefully the flash will work since it should take care of the modem issue that I was talking about in my previous post.
Best of luck...
Sent from my MB860 using xda premium
ccrows said:
Hopefully the flash will work since it should take care of the modem issue that I was talking about in my previous post.
Best of luck...
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
I've tried flashing it with a few firmwares and nothing works, the error is the same.
Do you know what could have been affected by the full factory reset ?
Do you want some more info that could help you identify the problem ?
I went to a mobile service and they said they don't know what to do to it.
They tried to unlock the network and this is not the problem.
Related
Month àgo my 3g used to be working, sudenly my 3g change to 2g.
I checked my settings and everything was fine.
I putt my sim in another phone and the 3g worked, so its not a sim problem.
My apn setting are good.
I tried everything and nothing solved the problem.
What can it be?
Check Settings - Wireless and Network - Mobile Networks - Network mode, it should NOT be GSM only. Try setting it to WCDMA only.
.
I already tried it. If i putt it on wcdma only i dont get any connection.
Backup data and then factory reset .
jje
How do i do factory reset?
Backup your data and apps using a program like Titanium Backup, then go to Clockwork Recovery and select Factory Reset/Wipe (or something similar).
I did wipe and change my rom few times and its doesnt work.
Dont know what rom you are using but i would try installing stock froyo via Odin .
jje
Make sure that HSPA is activated on your phone by dialing *#301279#
Sent from my GT-I9000 using XDA Premium App
anfearg said:
Make sure that HSPA is activated on your phone by dialing *#301279#
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
It is active.
Have you tried flashing a new modem at all???
Sent from my GT-I9000 using XDA Premium App
Not yet. I dont know what kind of modem to flash.
If its your standard Galaxy S I9000 you should be able to flash any of the standard modems. I use JPY because it seems to have the best signal and battery life. If you search the forums a little you should find out how. Darkyys ROM uses it as standard
Sent from my Cyanogenmod Galaxy S
anfearg said:
If its your standard Galaxy S I9000 you should be able to flash any of the standard modems. I use JPY because it seems to have the best signal and battery life. If you search the forums a little you should find out how. Darkyys ROM uses it as standard
Sent from my Cyanogenmod Galaxy S
Click to expand...
Click to collapse
He already use JPY and double posted here: http://forum.xda-developers.com/showthread.php?t=992743
Ah the old double post.... nothing more to suggest after reading the other one.
Hope you get it sorted...
Sent from my Cyanogenmod Galaxy S
I have the same problem and I just repartitioned in Odin to JS7 and it still won't automatically go to 3G/HSDPA, I have to force it either through setting it to WCDMA only and then back to auto or through SGStools by setting it to WCDMA 1900 only and then add the others in combination bands. All of the APN settings are correct, my IMEI is still the same, my HSPA revision is set, phone information states WCDMA preferred, I've factory reset, cleared cache, cleared Dalvik cache, and as I mentioned earlier, flashed with repartition, and after all of that... I still have to force HSDPA access.
Hope Someone can help.
I had a problem with my Samsung galaxy s i9000 and i was told to flash it using Odin, i downloaded the files from sam firmware and put android 2.3 onto it, when it had completed the phone will not get a service, everything else works fine and it reads the sim card and the contacts etc it just wont connect to network?
Can anyone help?
Thanks
Josh
Does it work wireless ?
Does it get phone network, or both data and phone services are unavailable ?
Do you have in wireless and network settings under mobile network the "use data packet" switched on ??
Did you try with a sim from another operator just to see if it's a matter of specific operator settings ?
I got italian language, maybe settings name are a bit different from the ones i mentioned, but that's the concept.
Bye
gbnz said:
Does it work wireless ?
Does it get phone network, or both data and phone services are unavailable ?
Do you have in wireless and network settings under mobile network the "use data packet" switched on ??
Did you try with a sim from another operator just to see if it's a matter of specific operator settings ?
I got italian language, maybe settings name are a bit different from the ones i mentioned, but that's the concept.
Bye
Click to expand...
Click to collapse
all that works fine and i haven't tried a new sim card as i do not have another sim card to try but i thought that if it was that problem the phone would not start as it would ask you for a network lock code? it is really annoying. ]
thanks
Check your imei dont post it here just check it is correct. hopefully you havent trashed your efs folder
Sent from my GT-I9000 using XDA App
android Josh123 said:
Hope Someone can help.
I had a problem with my Samsung galaxy s i9000 and i was told to flash it using Odin, i downloaded the files from sam firmware and put android 2.3 onto it, when it had completed the phone will not get a service, everything else works fine and it reads the sim card and the contacts etc it just wont connect to network?
Can anyone help?
Thanks
Josh
Click to expand...
Click to collapse
Check if your IMEI is correct, you find it under settings, about, status.
Your correct IMEI is on a sicker under the battery.
Edit: to late ; )
/qsec
stierney said:
Check your imei dont post it here just check it is correct. hopefully you havent trashed your efs folder
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I have typed the code into the phone and the IMEI number that pops up is the same as the one on the back of the phone underneath the battery.
Thanks
Ok well thats good news. Can ya make phone calls?
Sent from my GT-I9000 using XDA App
android Josh123 said:
I have typed the code into the phone and the IMEI number that pops up is the same as the one on the back of the phone underneath the battery.
Thanks
Click to expand...
Click to collapse
Was it the same problem with the service before you flashed it?
What rom did you flash?
/qsec
stierney said:
Ok well thats good news. Can ya make phone calls?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
nope when i try and make a phone call or send a text it says "mobile network not available"
mmmm....
are you sure you downloaded the correct rom ? I mean there are different roms for different countries.
While you just reflashed, why dont you go back to original stock rom or to a stable one (one i remember is JPY_JPY_JPY) just to see if everything works fine ?
Anyway....which was the problem you had that required you to flash with odin ??
Yeah you prolly downloaded a rom fir another region if your imei is in tact and ya vant even make calls. If you can make calls and just cant use data then the rom doesnt have your apn settings and you will have to add them manually.
Sent from my GT-I9000 using XDA App
qsec said:
Was it the same problem with the service before you flashed it?
What rom did you flash?
/qsec
Click to expand...
Click to collapse
Nope before it was flashed it wouldn't read the sim card but i was told that flashing it will solve it and now it does read the sim card but it will not get a service and the phone was 2.2 and i flashed it to 3.3 gingerbread.
Thanks
Post your Country and network operator also the Rom ya downloadef and where ya downloaded from.
Sent from my GT-I9000 using XDA App
stierney said:
Post your Country and network operator also the Rom ya downloadef and where ya downloaded from.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I am in
England
Im on Network 02
the rom i downloaded was from samfirmware
"I9000XWJVB ## 512.PIT 2.3.3 2011 April 8 CSC = I9000XEEJV3" thats all the imformation about the rom
thanks
android Josh123 said:
Nope before it was flashed it wouldn't read the sim card but i was told that flashing it will solve it and now it does read the sim card but it will not get a service and the phone was 2.2 and i flashed it to 3.3 gingerbread.
Thanks
Click to expand...
Click to collapse
Have you bought it used with this problem?
If so there is a chance that the IMEI is reported stolen and blocked at the service provider.
/qsec
qsec said:
Have you bought it used with this problem?
If so there is a chance that the IMEI is reported stolen and blocked at the service provider.
/qsec
Click to expand...
Click to collapse
No, i got the phone for Christmas and it was fine until it would not read the sim card and then i got told to flash it with Odin and that should fix the problem and it did the phone will not read the sim card and that problem is not there anymore but there is a new problem since flashing and it wont connect to a service
thanks
android Josh123 said:
I am in
England
Im on Network 02
the rom i downloaded was from samfirmware
"I9000XWJVB ## 512.PIT 2.3.3 2011 April 8 CSC = I9000XEEJV3" thats all the imformation about the rom
thanks
Click to expand...
Click to collapse
That is the wrong one for UK. Use XXJVK instead and you will be fixed.
midas5 said:
That is the wrong one for UK. Use XXJVK instead and you will be fixed.
Click to expand...
Click to collapse
Used this firmware and the fault is still there anything else it could be?
thanks
Factory reset, flash a different rom, factory reset. Not all flashes are totally successful, this should help
Sent from my GTI9000 using XDA App, gingerbread 2.2.3 jvk rooted, ADW launcher + gingerbread theme
android Josh123 said:
Used this firmware and the fault is still there anything else it could be?
thanks
Click to expand...
Click to collapse
Try to test another sim-card.
It could be that easy, even if it seems to work a bit.
/qsec
hey guys.
this is my first post so please forgive me if this is the wrong place or is listed somewhere where i could not find.
so my problem is i updated my gt-i9000 to 4.03 using this guide.
cyanogenmod 9-cm9-by-teamhacksung-for-galaxy-s-i9000-ics-android-4-0-3
the problem i have is that i now don't have any mobile data.
i lived with it for a while but now it is really frustrating.
i did not save the data settings so is there anything i can do?
can i reset to stock firmware then update again with saving the data settings?
of is there a simple way to remedy this?
any suggestions really appreciated.
elf.
Go to setting and reset access point name
Sent from my GT-N7000 using XDA
yea i have tried this but it does not work.
i will try updating to 4.0.4 and i might have more luck.
elf.
Just create a new apn and enter the settings for the apn of your service provider
Sent from my GT-I9000 using XDA
I would suggest the same as the previous post: create a new APN and enter the settings manually. It should normally work.
Hi All,
Need some help - I've been working more on CDMA phones b/c of sprint, and just flashed my friends captivate (att), but after the flash, have no data or cell service. (I flashed cwm recovery with odin, and then was able to get miui 2.8.3 onto the phone.)
Not sure how to get the cell signal to work, or what needs to be done to get things back to good ...
I see things about flashing back to stock, and then restarting - and i'm lost with the modem files, nothing of them are working so far, but I feel good about it....
--Adrian
Apn settings need to be reset to default... Go to Settings/ Wireless and network/ Mobile networks/ Access Point Names then hit capacitve menu button then "Reset to default".
And if that doesn't work, u probably need to flash an appropriate modem.
Sent from my SAMSUNG-SGH-I777 using xda premium
Also you can try entering the APN yourself. Just Google the name of your network, and apn. You should find the info you need to create a new apn.
Sent from my cm_tenderloin using xda premium
My XT862 stock version is Verizon 5.7.906, and everything works well except wifi(it always show an error and can not lunch, even if I reset to factory settings or flash sbf)
And in SafeStrap 3.05, I installed CM10.1-2013-03-23 version in slot 1. the wifi works well but I can not turn on data connection. I am using a WCDMA network. In *#*#4636#*#*, I can find it works on UMTS mode, but no data connection. I tried to enable data connection via correct the checkbox in setting and in the *#*#4636#*#* menu, but both failed.
How can I deal with it?
Sounds like you forgot the GSM mods to the build.prop. Are you using the 862 or 883 radio?
MrObvious said:
Sounds like you forgot the GSM mods to the build.prop. Are you using the 862 or 883 radio?
Click to expand...
Click to collapse
I am using XT862 radio, N_03.18.32P.
This problem appeared about a week ago, when I am using the 2013-03-17 build, and it continued when I upgrade to 2013-03-23 build.
There's a line that you could try uncommenting in the build.prop like ro.ril = 284000 or something and one below it. Or you might have to add that. See if that helps. (Or you could try an 883 build.prop).
MrObvious said:
There's a line that you could try uncommenting in the build.prop like ro.ril = 284000 or something and one below it. Or you might have to add that. See if that helps. (Or you could try an 883 build.prop).
Click to expand...
Click to collapse
I tried what you say on stock rom radio and the baseband become unknown. And I tried to change my baseband to n_34.18.16s, the system can find baseband and call or send SMS, but still no data connection.
lzy0702 said:
I tried what you say on stock rom radio and the baseband become unknown. And I tried to change my baseband to n_34.18.16s, the system can find baseband and call or send SMS, but still no data connection.
Click to expand...
Click to collapse
That's progress. Check your APN settings.
MrObvious said:
That's progress. Check your APN settings.
Click to expand...
Click to collapse
My APN settings are all correct, but it still does not works.
This APN settings work on the stock ROM but not on CM10.1.
It must be something wrong.....
MrObvious said:
That's progress. Check your APN settings.
Click to expand...
Click to collapse
After I reset the APN settings, the icon of data link appears and then disappears about 10 seconds later.
Ugh weird. I'm running out of ideas.
I have the same issue
lzy0702 said:
My XT862 stock version is Verizon 5.7.906, and everything works well except wifi(it always show an error and can not lunch, even if I reset to factory settings or flash sbf)
And in SafeStrap 3.05, I installed CM10.1-2013-03-23 version in slot 1. the wifi works well but I can not turn on data connection. I am using a WCDMA network. In *#*#4636#*#*, I can find it works on UMTS mode, but no data connection. I tried to enable data connection via correct the checkbox in setting and in the *#*#4636#*#* menu, but both failed.
How can I deal with it?
Click to expand...
Click to collapse
I live in China ,so my xt862 works on China Mobile,phone call and SMS works well,but cannot connect the data network.wifi is good My xt862's information :system version:5.7.906.xt862.verizon.en.us, model：droid3， android version: 2.3。4，baseband：N-03.18.32p，kernel:2.63537.g5fa4155,* *build number: 535.1._84_d3g-66_m2-10
I think the APN is correct,and I try to flash the xt883's radio,the same situation.I want to use the edge or gprs,it is important to me. No matter what I do,there is no symbol of mobile date network...
hardware or software?
MrObvious said:
Ugh weird. I'm running out of ideas.
Click to expand...
Click to collapse
I doubt if the hardware cause this issues?But calls and SMS is good.......Anybody can help us ?
As has been mentioned numerous times in the cm10.1 thread, builds after 3/11 do not have working data.
Sent from my XT860 using xda premium
Endoroid said:
As has been mentioned numerous times in the cm10.1 thread, builds after 3/11 do not have working data.
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
Oh. There's your answer. hehe.
but my D3's version is not CM10.1
MrObvious said:
Oh. There's your answer. hehe.
Click to expand...
Click to collapse
my system version is 5.7.906.verizon.en,.us, kernel ver. 2.6.35.7-g5f74155.. baseband :n_34.18.16s. Could you give me a hand?