My XT862 stock version is Verizon 5.7.906, and everything works well except wifi(it always show an error and can not lunch, even if I reset to factory settings or flash sbf)
And in SafeStrap 3.05, I installed CM10.1-2013-03-23 version in slot 1. the wifi works well but I can not turn on data connection. I am using a WCDMA network. In *#*#4636#*#*, I can find it works on UMTS mode, but no data connection. I tried to enable data connection via correct the checkbox in setting and in the *#*#4636#*#* menu, but both failed.
How can I deal with it?
Sounds like you forgot the GSM mods to the build.prop. Are you using the 862 or 883 radio?
MrObvious said:
Sounds like you forgot the GSM mods to the build.prop. Are you using the 862 or 883 radio?
Click to expand...
Click to collapse
I am using XT862 radio, N_03.18.32P.
This problem appeared about a week ago, when I am using the 2013-03-17 build, and it continued when I upgrade to 2013-03-23 build.
There's a line that you could try uncommenting in the build.prop like ro.ril = 284000 or something and one below it. Or you might have to add that. See if that helps. (Or you could try an 883 build.prop).
MrObvious said:
There's a line that you could try uncommenting in the build.prop like ro.ril = 284000 or something and one below it. Or you might have to add that. See if that helps. (Or you could try an 883 build.prop).
Click to expand...
Click to collapse
I tried what you say on stock rom radio and the baseband become unknown. And I tried to change my baseband to n_34.18.16s, the system can find baseband and call or send SMS, but still no data connection.
lzy0702 said:
I tried what you say on stock rom radio and the baseband become unknown. And I tried to change my baseband to n_34.18.16s, the system can find baseband and call or send SMS, but still no data connection.
Click to expand...
Click to collapse
That's progress. Check your APN settings.
MrObvious said:
That's progress. Check your APN settings.
Click to expand...
Click to collapse
My APN settings are all correct, but it still does not works.
This APN settings work on the stock ROM but not on CM10.1.
It must be something wrong.....
MrObvious said:
That's progress. Check your APN settings.
Click to expand...
Click to collapse
After I reset the APN settings, the icon of data link appears and then disappears about 10 seconds later.
Ugh weird. I'm running out of ideas.
I have the same issue
lzy0702 said:
My XT862 stock version is Verizon 5.7.906, and everything works well except wifi(it always show an error and can not lunch, even if I reset to factory settings or flash sbf)
And in SafeStrap 3.05, I installed CM10.1-2013-03-23 version in slot 1. the wifi works well but I can not turn on data connection. I am using a WCDMA network. In *#*#4636#*#*, I can find it works on UMTS mode, but no data connection. I tried to enable data connection via correct the checkbox in setting and in the *#*#4636#*#* menu, but both failed.
How can I deal with it?
Click to expand...
Click to collapse
I live in China ,so my xt862 works on China Mobile,phone call and SMS works well,but cannot connect the data network.wifi is good My xt862's information :system version:5.7.906.xt862.verizon.en.us, model:droid3, android version: 2.3。4,baseband:N-03.18.32p,kernel:2.63537.g5fa4155,* *build number: 535.1._84_d3g-66_m2-10
I think the APN is correct,and I try to flash the xt883's radio,the same situation.I want to use the edge or gprs,it is important to me. No matter what I do,there is no symbol of mobile date network...
hardware or software?
MrObvious said:
Ugh weird. I'm running out of ideas.
Click to expand...
Click to collapse
I doubt if the hardware cause this issues?But calls and SMS is good.......Anybody can help us ?
As has been mentioned numerous times in the cm10.1 thread, builds after 3/11 do not have working data.
Sent from my XT860 using xda premium
Endoroid said:
As has been mentioned numerous times in the cm10.1 thread, builds after 3/11 do not have working data.
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
Oh. There's your answer. hehe.
but my D3's version is not CM10.1
MrObvious said:
Oh. There's your answer. hehe.
Click to expand...
Click to collapse
my system version is 5.7.906.verizon.en,.us, kernel ver. 2.6.35.7-g5f74155.. baseband :n_34.18.16s. Could you give me a hand?
Related
Hello,
The short story is that I have a Samsung Galaxy S. I wanted to install some new firmware ( and because Kies bricked my phone a few months ago ) with Odin.
There was a guide somewhere where they did a full factory reset with
*2767*3855#
After I entered the code I could not connect to the network anymore. And cannot make any phone calls or receive them.
I am in Romania, using Vodafone.
I also tried
*#272*[my IMEI]# and selected CNX and after it reboots it asks me if I'm using Prepay or Postpay. I chose Postpay and still nothing.
If I search for networks it finds all of them but I still cannot connect to any.
I entered *#0011# and this is what I get
UMTS : Limited
RRC State : IDLE
WCDMA 2100 Band 1
Reg PLMN 226-1, IsPCS? 0
FREQ DL : 10836
FREQ UL : 9886
CELL_ID : 0xc82811b
LAC : 0x7d16
PSC : 44
RSCP : -96, ECIO : -8
Click to expand...
Click to collapse
Tell me what I can try right now, or what information you need more from me.
Usually this means that there is something wrong with your APN settings, like they were erased.
Check out your APN settings and make sure they match what your carrier needs. If they aren't right or missing then you will indeed have network issues...
Sent from my MB860 using xda premium
ccrows : the APN settings seem to be fine. As far as I know the APN are for data networking ( internet ) and before if I had no APN set I could still call people.
Reset your apn settings!
Sent from my GT-I9000 using xda premium
BHuvan goyal said:
Reset your apn settings!
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I tried this but I cannot connect to the Vodafone network first!
hydrarulz said:
ccrows : the APN settings seem to be fine. As far as I know the APN are for data networking ( internet ) and before if I had no APN set I could still call people.
Click to expand...
Click to collapse
Your APN has nothing to do about whether you can call or not, it controls your data. You could have an empty APN and still make calls.
I really think something in your APN is messed up, but its kinda hard to tell without seeing the phone. Your symptoms do point to the APN.
The only other thing it could be is a bad modem flash. If you are sure that your APN is fine try flashing a different compatible modem in Odin again...
Sent from my MB860 using xda premium
I deleted all the APNs and I know that the network worked fine like this.
I will try flashing with a firmware that I know worked before and see what happens.
The wierd thing is that the problem appeared after I entered the factory reset code, not after flashing it.
Sent from my GT-I9000 using XDA App
hydrarulz said:
I deleted all the APNs and I know that the network worked fine like this.
I will try flashing with a firmware that I know worked before and see what happens.
The wierd thing is that the problem appeared after I entered the factory reset code, not after flashing it.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Hopefully the flash will work since it should take care of the modem issue that I was talking about in my previous post.
Best of luck...
Sent from my MB860 using xda premium
ccrows said:
Hopefully the flash will work since it should take care of the modem issue that I was talking about in my previous post.
Best of luck...
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
I've tried flashing it with a few firmwares and nothing works, the error is the same.
Do you know what could have been affected by the full factory reset ?
Do you want some more info that could help you identify the problem ?
I went to a mobile service and they said they don't know what to do to it.
They tried to unlock the network and this is not the problem.
Dear Experts
I was having some weird issues with my XT862 flashed with XT883 china telecom ROM. So I thought about a factory reset. After reset my phone was up & asking for network activation, I managed to skip it but it is not accepting my CDMA-OMH sim card & says INVALID UIM.
If i go to network selection at first click it crashes & then reopen with 3 option of 2g/ 3g/ Automatic. Earlier I used to get 3 options as GSM Only/ CDMA Only/ Global (GSM/CDMA). Now when I insert CDMA Sim i get a green + sign instead of signal bar & error : INVALID UIM & if I insert a GSM sim I get a sim error icon & no signal bar icon & error : NO SERVICE (NO UIM CARD)
As i checked up *#*#2468#*#* doesn't work after OTA update to 57.1.60.
On dialing *#*#4636#*#* I get all the options & I select CDMA Only (PRL) but nothing happens.
Luckily I had safe strap installed & it was working even after factory reset & I am able to restore my backup.
I even tried copying build,prop & ril files from working backup to system & etc after factory reset, but nothing changed.
Please help
singh.r said:
Dear Experts
I was having some weird issues with my XT862 flashed with XT883 china telecom ROM. So I thought about a factory reset. After reset my phone was up & asking for network activation, I managed to skip it but it is not accepting my CDMA-OMH sim card & says INVALID UIM.
If i go to network selection at first click it crashes & then reopen with 3 option of 2g/ 3g/ Automatic. Earlier I used to get 3 options as GSM Only/ CDMA Only/ Global (GSM/CDMA). Now when I insert CDMA Sim i get a green + sign instead of signal bar & error : INVALID UIM & if I insert a GSM sim I get a sim error icon & no signal bar icon & error : NO SERVICE (NO UIM CARD)
As i checked up *#*#2468#*#* doesn't work after OTA update to 57.1.60.
On dialing *#*#4636#*#* I get all the options & I select CDMA Only (PRL) but nothing happens.
Luckily I had safe strap installed & it was working even after factory reset & I am able to restore my backup.
I even tried copying build,prop & ril files from working backup to system & etc after factory reset, but nothing changed.
Please help
Click to expand...
Click to collapse
You need the build.prop from the AT&T/T-Mobile thread.
MrObvious said:
You need the build.prop from the AT&T/T-Mobile thread.
Click to expand...
Click to collapse
Thanx I'll try that soon.
Hi Singh which ROM you currently using ?
NIGHTMARE- said:
Hi Singh which ROM you currently using ?
Click to expand...
Click to collapse
Still on XT883. Downloaded XT862 Verizon ROM one click flash (RSD Lite) but not Flashed till now.
Confused that shall I try MVP3 method or this one. I am afraid of loosing CDMA-OMH else If I had GSM I would have flashed.
But I am going to do it any way, just waiting for another CDMA phone in case after flash I am not able to configure CDMA OMH.
Which ROM you are using?
I'm running the 883 radio and build.prop and I don't think it will let you run CDMA and GSM at the same time.
MrObvious said:
I'm running the 883 radio and build.prop and I don't think it will let you run CDMA and GSM at the same time.
Click to expand...
Click to collapse
I'm running that Rom on my xt862 and was under the impression that after flashing the build.prop and radio.img files that you can no longer use the cdma and global capabilities of the device.
Sent from my XT883 using xda premium
Correct. My phone in theory should use a Verizon signal but when I switch over it doesn't find anything.
Sent from my xt862 using xda app-developers app
MrObvious said:
Correct. My phone in theory should use a Verizon signal but when I switch over it doesn't find anything.
Sent from my xt862 using xda app-developers app
Click to expand...
Click to collapse
If I am not wrong , I have seen post on XDA about how to use Droid 3 on T Mobile & ATT after sim unlock & also switch back to Verizon if required. It may not work together but it can work that way. Please correct me.
So in theroy if I flash XT862 and I have to move back to XT883, should there be any problem?
When XT883 ROM works on GSM/CDMA together why XT862 can't be modified for that. (May be a silly question)
I didn't think it was. I dunno. I always have had to flash the 862 radio.
Sent from my xt862 using xda app-developers app
singh.r said:
If I am not wrong , I have seen post on XDA about how to use Droid 3 on T Mobile & ATT after sim unlock & also switch back to Verizon if required. It may not work together but it can work that way. Please correct me.
So in theroy if I flash XT862 and I have to move back to XT883, should there be any problem?
When XT883 ROM works on GSM/CDMA together why XT862 can't be modified for that. (May be a silly question)
Click to expand...
Click to collapse
You may be able to make it work for you, I flashed my D3 strictly for use on AT&T because I dislike Verizon but they seem to have the best phones. Let me look around on google for you and if I find anything I'll send you a pm.
Sent from my XT883 using xda premium
http://rootzwiki.com/topic/28888-cd...rom3d-v42beatstweaksxloudbassmod/page__st__70 this might help you with switching back to cdma and using it. I'm almost positive though that once you flash the radio and build files, that you won't be able to use the cdma side of the phone anymore.....unless you use the unbrick method thread on here and take everything back to stock.
Sent from my XT883 using xda premium
You can flash the radio file from the 890 spb and get a regular build.prop easy.
Sent from my xt862 using xda app-developers app
I haven't been able to find a definitive answer to this question yet: Does it make a difference which JB ROM I flash on a SPH-P100 on which I am only using wifi? I have been using CM10 Nightlies, which are fine, but they do incorrectly identify the phone as Verizon. Basically, I'm interested in trying out some of the other ROMs.
Thanks!
if you aren't using data it won't matter. you won't be able to use the data anyway if your esn isn't registered to their network.
Just to be absolutely sure, would it make a difference if it's a GSM ROM?
Mobile Data 3G Not Working CM10
derekwilkinson said:
if you aren't using data it won't matter. you won't be able to use the data anyway if your esn isn't registered to their network.
Click to expand...
Click to collapse
I have 2 SPH-P100 on VZW and I had them on ICS9 and after updating it to CM10 my Mobile Data Stopped working on both any Ideas????
Whizzpopper said:
Just to be absolutely sure, would it make a difference if it's a GSM ROM?
Click to expand...
Click to collapse
It will brick your CDMA device.
Sent from my GT-P1000 using xda app-developers app
Thanks
priyana said:
It will brick your CDMA device.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Any ideas to revert or make it work? I was able to downgrade to cm and still wasn't working I'm gonna try CDMATool and try with different IMEI and MEID. Do you know what did exactly bricked?? Baseband, modem drivers, or is just a ROM malfunction? An Volunteers to help me figure it out, lol
Thanks for all your help.
andyxaspikes said:
Any ideas to revert or make it work? I was able to downgrade to cm and still wasn't working I'm gonna try CDMATool and try with different IMEI and MEID. Do you know what did exactly bricked?? Baseband, modem drivers, or is just a ROM malfunction? An Volunteers to help me figure it out, lol
Thanks for all your help.
Click to expand...
Click to collapse
I was replying to the person who want to flash the GSM ROM into his CDMA device.
I personally have never encountered anyone who has done that.
Are you saying you accidentally flashed a GSM rom into your CDMA?
As long as you can still go to download mode, you should try to flash a stock CDMA rom that has a pit file as well, using Odin repartition or use heimdall.
priyana said:
I was replying to the person who want to flash the GSM ROM into his CDMA device.
I personally have never encountered anyone who has done that.
Are you saying you accidentally flashed a GSM rom into your CDMA?
As long as you can still go to download mode, you should try to flash a stock CDMA rom that has a pit file as well, using Odin repartition or use heimdall.
Click to expand...
Click to collapse
Well I Flashed the p1c (CDMA) CM10 nightly. while I'm connecting to my WiFi it shows verizon wireless on the status bar. and if I go to the status it shows Network (Verizon Wireless) ,signal strenght (akward -4dBm), Mobile Network type (CDMA - EvDo rev. A:6, Service state (In Service), Mobile Network state (Disconnected) I turn off the WiFi and it stays in Connecting for 10-15 secs and goes back to Disconnected.
I tried heimdall and I was able to put the zimage and recovery. when I add the pit file it grays out, so I tried some of the One Click restock and it allowed me to go back to my NAND backups on CM9 but it just doesnt want to connect.
any other suggestions??
THANKS A LOT for all your help!!!!
I didnt I figured out they sold them to me with free data plan for 6months then thats when it stopped...
flash through KDZ, everything fine, but cant use Data, anyone know what problem?
flash HUB(SINGAPORE) ASEABK VERSION: 20A
choose CDMA and 3GQCT also the same.
WIFI, SMS, Call all function is good, just cant DATA 3G only...
No wi-fi here.
Sent from my MZ601 using xda premium
ming0000 said:
flash through KDZ, everything fine, but cant use Data, anyone know what problem?
flash HUB(SINGAPORE) ASEABK VERSION: 20A
choose CDMA and 3GQCT also the same.
WIFI, SMS, Call all function is good, just cant DATA 3G only...
Click to expand...
Click to collapse
It could be your APN settings. Make sure you have the correct APN settings for your carrier.
AlderCass said:
It could be your APN settings. Make sure you have the correct APN settings for your carrier.
Click to expand...
Click to collapse
APN checking correct, dont know what problem.
will double comfirn it 2morow again.
Hi all,
I am currently on stock 4.1.2 JB build of this years January.
Whenever I start my phone, the internet/data connectivity is a G, so GSM rather than H/3G. That is, until I search for networks and set it to my carrier (being 3 IRL) BUT the thing is it is actually already on 3 IRL, so it definitely isn't roaming. Why does this happen? Do I have to live with it? It never occured with a previous stock build, or Maclaws CM10.2. It's not major, it just gets really annoying. Cheers!
Aneuryst said:
Hi all,
I am currently on stock 4.1.2 JB build of this years January.
Whenever I start my phone, the internet/data connectivity is a G, so GSM rather than H/3G. That is, until I search for networks and set it to my carrier (being 3 IRL) BUT the thing is it is actually already on 3 IRL, so it definitely isn't roaming. Why does this happen? Do I have to live with it? It never occured with a previous stock build, or Maclaws CM10.2. It's not major, it just gets really annoying. Cheers!
Click to expand...
Click to collapse
Make sure Network mode is set to Auto mode or WCDMA in Settings -> More settings -> Mobile networks -> Network mode.
ImproAptoVictum said:
Make sure Network mode is set to Auto mode or WCDMA in Settings -> More settings -> Mobile networks -> Network mode.
Click to expand...
Click to collapse
It is.
Aneuryst said:
It is.
Click to expand...
Click to collapse
GSM seems to be prefered when Mobile data is off. Unless it doesnt swtich to 3G/H while using Mobile data (e.g. browsing the internet) there shouldnt be any problem.
ImproAptoVictum said:
GSM seems to be prefered when Mobile data is off. Unless it doesnt swtich to 3G/H while using Mobile data (e.g. browsing the internet) there shouldnt be any problem.
Click to expand...
Click to collapse
No, see, I permanently have my mobile data on. I have my phone off over night. When I turn it on, it is always on GSM no matter what, until I manually search networks and switch it back to 3G/H (by selecting my network)
So theoretically, GSM isn't preferred because I have 3-4 bars of 3G/H.
Aneuryst said:
No, see, I permanently have my mobile data on. I have my phone off over night. When I turn it on, it is always on GSM no matter what, until I manually search networks and switch it back to 3G/H (by selecting my network)
So theoretically, GSM isn't preferred because I have 3-4 bars of 3G/H.
Click to expand...
Click to collapse
What is your phones current baseband version, kernel version and build number?
ImproAptoVictum said:
What is your phones current baseband version, kernel version and build number?
Click to expand...
Click to collapse
Baseband version- XXAMI1
Kernel version- 3.0.31
Build number- JZO54K.I8190NXXAMJ2
Aneuryst said:
Baseband version- XXAMI1
Kernel version- 3.0.31
Build number- JZO54K.I8190NXXAMJ2
Click to expand...
Click to collapse
You might try to flash baseband from Ireland (Three) instead of the one (i assume) you are using at the moment, as it is specifically for Three.
ImproAptoVictum said:
You might try to flash baseband from Ireland (Three) instead of the one (i assume) you are using at the moment, as it is specifically for Three.
Click to expand...
Click to collapse
Alright, downloading that one now. I used that one before but had a bug where my SMS would disappear...
It's just, yes I am using that one right now, but I flashed a Three specific modem.
Aneuryst said:
Alright, downloading that one now. I used that one before but had a bug where my SMS would disappear...
It's just, yes I am using that one right now, but I flashed a Three specific modem.
Click to expand...
Click to collapse
I fully flashed (updated to) the newest firmware (ANB1) for I8190N myself without any issues with mobile network or what so ever, even it being VNZ (New Zealand Vodafone) region despite my phones initial Nordic region.
ImproAptoVictum said:
I fully flashed (updated to) the newest firmware (ANB1) for I8190N myself without any issues with mobile network or what so ever, even it being VNZ (New Zealand Vodafone) region despite my phones initial Nordic region.
Click to expand...
Click to collapse
Well, I also read that all XX firmwares work in any part of Europe regardless. I'm going to try to flash the latest AMJ2 modem now and see.
Aneuryst said:
Well, I also read that all XX firmwares work in any part of Europe regardless. I'm going to try to flash the latest AMJ2 modem now and see.
Click to expand...
Click to collapse
Yes, XX is 'international' and should work with all regions apart from Asia (ZS).
ImproAptoVictum said:
Yes, XX is 'international' and should work with all regions apart from Asia (ZS).
Click to expand...
Click to collapse
Well I just flashed the modem and the problem is still there.
If I flash that firmware with Odin, do I need to wipe data? Or can you update stock roms with a dirty flash too?
Aneuryst said:
Well I just flashed the modem and the problem is still there.
If I flash that firmware with Odin, do I need to wipe data? Or can you update stock roms with a dirty flash too?
Click to expand...
Click to collapse
Flashing it on top of stock rom with Odin would be like updating (normally no user data/apps lost), but you would however lose root and potentially custom recovery (post reboot after flash). Taking a nandroid backup prior this is advised, as always.
ImproAptoVictum said:
Flashing it on top of stock rom with Odin would be like updating (normally no user data/apps lost), but you would however lose root and potentially custom recovery (post reboot after flash). Taking a nandroid backup prior this is advised, as always.
Click to expand...
Click to collapse
Well, I have no problem rerooting and reflashing CWM as it only takes 5 minutes anyway.
I'll post the results once it's downloaded and flashed
ImproAptoVictum said:
Flashing it on top of stock rom with Odin would be like updating (normally no user data/apps lost), but you would however lose root and potentially custom recovery (post reboot after flash). Taking a nandroid backup prior this is advised, as always.
Click to expand...
Click to collapse
Alright, now it's roaming every time I reboot.. until I manually switch to 3G.
Aneuryst said:
Alright, now it's roaming every time I reboot.. until I manually switch to 3G.
Click to expand...
Click to collapse
National roaming, that is?
ImproAptoVictum said:
National roaming, that is?
Click to expand...
Click to collapse
Yes, my roaming carrier is Vodafone IE, so on boot it's always set to that instead of 3 IRL. I have it on auto mode, but theoretically WCDMA should be preferred since I have 4 bars of H right now.
Aneuryst said:
Yes, my roaming carrier is Vodafone IE, so on boot it's always set to that instead of 3 IRL. I have it on auto mode, but theoretically WCDMA should be preferred since I have 4 bars of H right now.
Click to expand...
Click to collapse
Tried choosing 3 IRL (as prefered) insted of having it select automatically in Settings -> More settings -> Mobile networks -> Network operators (-> Search networks)?
ImproAptoVictum said:
Tried choosing 3 IRL (as prefered) insted of having it select automatically in Settings -> More settings -> Mobile networks -> Network operators (-> Search networks)?
Click to expand...
Click to collapse
That's what I always have to do.