Related
trying to make sure i follow the instructions exactly to make sure my install is perfect.
So far I:
-used odin one click to go back to stock jf6. (i didnt have to disable voodoo right? i think using odin one click completely wipes it, so no reason to disable lagfix)
-rooted the phone
-installed rom manager, then when i get to this part it doesnt make sense
"Flash ClockworkMod Recovery. Pick Captivate (MTD) (ignore the warning about not having an official, pick ClockworkMod 2.x).
Make sure you can reboot into ClockworkMod recovery from ROMManager. Reboot and get back into ROMManager Premium."
I choose captivate mtd and it gives me this message
"Samsung captivate (MTD) does not have an officially supported clockworkmod recovery yet. Have you installed a clockworkmod based recovery manually?"
-If i say no - it says until cwm is available rom manager will not work with captivate mtd
-if i say yes it says rom manager has been set up to use your existing recovery installation.
The problem is... I DONT HAVE A RECOVERY INSTALLATION YET!!!! I thought thats the whole reason im using rom manager. to install cwm....
I think last time to get it to work i chose something else, just to get cwm to work, and it did install, but i ended up having many bugs, and i was thinking that may have been why.
So please.... someone... tell me how im wrong in following these directions. Trying to install before i go to bed tonight.
lourivellini said:
So please.... someone... tell me how im wrong in following these directions. Trying to install before i go to bed tonight.
Click to expand...
Click to collapse
I just flashed one of the stock one click gingerbread packages, It included boogs kernel with cwm, and flashed cm7 from there, let it boot, rebooted to recovery, installed gapps and let it boot up again.
Worked fine.
I'm not sure if there's a new one click, but it wont install unless you have voodoo lagfix disabled.
mystichobo said:
I just flashed one of the stock one click gingerbread packages, It included boogs kernel with cwm, and flashed cm7 from there, let it boot, rebooted to recovery, installed gapps and let it boot up again.
Worked fine.
Click to expand...
Click to collapse
ridiculous. not that it worked, but that the instructions are so terrible.
Start with a rooted Eclair/Froyo running Eclair/Froyo Bootloaders (do not ask us how to do this).
Install ROMManager Premium.
Flash ClockworkMod Recovery. Pick Captivate (MTD) (ignore the warning about not having an official, pick ClockworkMod 2.x).
Make sure you can reboot into ClockworkMod recovery from ROMManager. Reboot and get back into ROMManager Premium.
Choose download ROMs.
Pick the CyanogenMod Nightlies.
Check the Google Apps addon.
Check Backup current ROM!
Check wipe data, cache, dalvik cache.
Let ROMManager finish the installation.
So not only is the part that im stuck on wrong, but you dont even need to be on froyo or eclair. great. thanks.
mystichobo said:
I'm not sure if there's a new one click, but it wont install unless you have voodoo lagfix disabled.
Click to expand...
Click to collapse
what wont install? I was previously on pinnacle, and to go back to stock, i just used the one click method. I thought this removes the lagfix? Am i right?
lourivellini said:
ridiculous. not that it worked, but that the instructions are so terrible.
Start with a rooted Eclair/Froyo running Eclair/Froyo Bootloaders (do not ask us how to do this).
Install ROMManager Premium.
Flash ClockworkMod Recovery. Pick Captivate (MTD) (ignore the warning about not having an official, pick ClockworkMod 2.x).
Make sure you can reboot into ClockworkMod recovery from ROMManager. Reboot and get back into ROMManager Premium.
Choose download ROMs.
Pick the CyanogenMod Nightlies.
Check the Google Apps addon.
Check Backup current ROM!
Check wipe data, cache, dalvik cache.
Let ROMManager finish the installation.
So not only is the part that im stuck on wrong, but you dont even need to be on froyo or eclair. great. thanks.
what wont install? I was previously on pinnacle, and to go back to stock, i just used the one click method. I thought this removes the lagfix? Am i right?
Click to expand...
Click to collapse
From memory they recommended froyo/eclair, but the gingerbread bootloaders work just fine.
You should be fine coming from pinnacle (I did), just make sure the voodoo lagfix is disabled first or the cm7 update zip won't install.
EDIT: I'll write you up a detailed step by step tutorial when I get home in about an hour.
You obviously have no clue what you're doing... ^ person above me... Installing an AOSP ROM, can be installed from any type of file system (even with lagfix) because it repartitions the whole phone... look through the Captivate General and Captivate Q&A, you will find your answers.
Sent from my I897 using xda premium
Please ask ROM specific questions on their respective q&a threads.
studacris said:
Please ask ROM specific questions on their respective q&a threads.
Click to expand...
Click to collapse
^^^This^^^
Thread closed, please continue this discussion here. No doubt all of your answers are contained in that thread.
I want to Flash Team ICSSGS [Android 4.0.3] (Link to ROM Thread) but I am not for sure what Bootloaders or Kernel I need to use.
I currently have:
Firmware Version: 2.2
Baseband Version: I897UCKB1
Kernel Version: 2.6.32.9
Build Number: FROYO.UCKB1
In general, the Gingerbread bootloaders are preferred with any of the ICS ROMs, because they are more ubiquitous and can be used with virtually any version 2.1 thru 4.0. Kernel-wise, the ICS ROMs come with a kernel, and your only other option is Glitch v14 beta right now...but mostly, you shouldn't need to worry about flashing anything beyond what's in the ROM itself right now.
WindRunnerXC said:
In general, the Gingerbread bootloaders are preferred with any of the ICS ROMs, because they are more ubiquitous and can be used with virtually any version 2.1 thru 4.0. Kernel-wise, the ICS ROMs come with a kernel, and your only other option is Glitch v14 beta right now...but mostly, you shouldn't need to worry about flashing anything beyond what's in the ROM itself right now.
Click to expand...
Click to collapse
So that ROM I listed in my OP comes with its own Kernel?
And is there a particular Bootloader I should use?
If there is, may you please link me to it?
Hey im currently running the ROM you are asking about. To answer your questions you have to be on the gingerbread bootloaders. You can flash those using odin, or since there is an official update out, use Kies mini to update your phone to gingerbread and that will flash the bootloaders for you.
About the kernel, the ROM you posted includes a kernel in the .zip and when you install the .zip it will flash the kernel for you. Its a fine kernel and works great so dont worry about changing it unless you have problems.
Here is the link on how to flash the bootloaders using Odin. Its not a hard process and pretty safe so let us know how you come out on the other side!
http://forum.xda-developers.com/showthread.php?t=1129821&highlight=gingerbread+bootloader
capocaccia said:
Hey im currently running the ROM you are asking about. To answer your questions you have to be on the gingerbread bootloaders. You can flash those using odin, or since there is an official update out, use Kies mini to update your phone to gingerbread and that will flash the bootloaders for you.
About the kernel, the ROM you posted includes a kernel in the .zip and when you install the .zip it will flash the kernel for you. Its a fine kernel and works great so dont worry about changing it unless you have problems.
Here is the link on how to flash the bootloaders using Odin. Its not a hard process and pretty safe so let us know how you come out on the other side!
http://forum.xda-developers.com/showthread.php?t=1129821&highlight=gingerbread+bootloader
Click to expand...
Click to collapse
Now when I flash this bootloader you listed, will Froyo still boot or will I have to flash my ROM afterwards?
froyo will still boot. GB BL are backwards compatible and the ISCSGS script should allow it to flash over any ROM
Hi all.
as i can't post yet in a thread mentioned by mrnapolean1 (http://forum.xda-developers.com/showthread.php?t=1362092) I'll try to ask my question here, as it related to a question asked by this thread starter
so i have gingerbread 2.3.5, installed CornKernel_UCKK4_v603 and custom rom SimplyStock KK4 V1.0 , so if i wanted to switch Team ICSSGS [Android 4.0.3] should i do following?
1. wipe data /factory reset
2.wipe system
3.flash from recovery mode Android 4.0.3 zip?
I already have a backup made with Efs Pro as a tar file
anything else i need to do?
thank you so much in advance
mrnapolean1 said:
Now when I flash this bootloader you listed, will Froyo still boot or will I have to flash my ROM afterwards?
Click to expand...
Click to collapse
Yes, Froyo will still boot. If this were a layer cake it would go something like bootloader, kernel, rom. So basically, your bootloader has nothing to do with your kernel or your rom but it is at the bottom layer of the boot process. It does effect which ROMs you can use though as gingerbread and ICS roms require GB bootloaders. So flash the bootloaders, you will still be on Froyo. Update to GB. Root GB. Place the ROM on your internal SD and then flash it. If you run into any problems check the common problems page found on the first page of the SGSICS ROM.
gugman said:
Hi all.
as i can't post yet in a thread mentioned by mrnapolean1 (http://forum.xda-developers.com/showthread.php?t=1362092) I'll try to ask my question here, as it related to a question asked by this thread starter
so i have gingerbread 2.3.5, installed CornKernel_UCKK4_v603 and custom rom SimplyStock KK4 V1.0 , so if i wanted to switch Team ICSSGS [Android 4.0.3] should i do following?
1. wipe data /factory reset
2.wipe system
3.flash from recovery mode Android 4.0.3 zip?
I already have a backup made with Efs Pro as a tar file
anything else i need to do?
thank you so much in advance
Click to expand...
Click to collapse
First, if you want to keep any of your apps or contacts backup those as well using Titanium Backup. Make sure to backup to the External SD card or make a copy of the backup somewhere other than the phones internal SD.
Second, you dont have to wipe data/factory reset before you flash. This is only if you have the problem of a bootloop when you try to install. I had this problem and when I did the wipe data afterward it fixed it immediately. So follow this:
1: Boot into CWM
2: install rom
IF you have an issue with a boot loop at this point
1: Get back into CWM using the button combination
2: Wipe data/Factory Rest and Wipe Cach
capocaccia
thank you !
one more question, i understood about data/factory/cash, but dont i need to format system before flashing new rom? i thought its always better to do before new rom flashing?
gugman said:
capocaccia
thank you !
one more question, i understood about data/factory/cash, but dont i need to format system before flashing new rom? i thought its always better to do before new rom flashing?
Click to expand...
Click to collapse
I think this was true when flashing older roms. When I flashed that ROM I did not format system and it worked fine. Let me know if you have any problems when you flash.
capocaccia said:
I think this was true when flashing older roms. When I flashed that ROM I did not format system and it worked fine. Let me know if you have any problems when you flash.
Click to expand...
Click to collapse
i see. okey, thanx a lot again. will be able to flash in about an hour and will let you know
after flashing all went good and phone booted with no problem, except that i don't have a wi-fi, it is connected after typing my password in, wifi icon is on home screen, but could not enter any website or connect to my google account. any ideas?
Try flashing this: http://code.google.com/p/ice-cream-.../detail?name=WifiFix.zip&can=2&q=#makechanges
Sent from my Captivate running Android 4.0.3 ICS
capocaccia said:
Try flashing this: http://code.google.com/p/ice-cream-.../detail?name=WifiFix.zip&can=2&q=#makechanges
Sent from my Captivate running Android 4.0.3 ICS
Click to expand...
Click to collapse
so after flashing that file my phone gives me screen like this
Power Reset or Uknown Upload Mode
and it is stucked. so may i pull the battery off and go to recovery mode again and go back to my previous room? should i perform system format in this case?
Try to reboot. If it won't reboot then ask around in the icssgs Q and A thread.
Sent from my Captivate running Android 4.0.3 ICS
capocaccia said:
Try to reboot. If it won't reboot then ask around in the icssgs Q and A thread.
Sent from my Captivate running Android 4.0.3 ICS
Click to expand...
Click to collapse
with keys+power button combination i've been able to exit that screen and reinstalled 4.0.3
do you know safe way how do i go back to SimplyStock KK4 V1.0? should i first flash CornKernel_UCKK4_v603 with odin? but is it safe to do over android 4.0.3?
sorry for bothering you, but i am kind of stucked
---------- Post added at 02:52 AM ---------- Previous post was at 02:33 AM ----------
ok, in the end managed to boot the phone with working wifi but still would like to know how to flash back to SimplyStock KK4 V1.0, just in case ;-) if that won't be problem for you. thank you !!!
IMHO the best way to go from gingerbread to ics 4.0 is to
- in the development section download stock kk4 without bootloaders, unless you dont have them http://forum.xda-developers.com/showthread.php?t=1300843
- then download a kernel of your choice probably cornkernal and put it on your internal sd card
- download ICS latest build and gapps and put them on your internal sd
- oneclick odin the stock kk4, let it boot up completely
- power off and install kernal via odin without aut reset
- boot into recovery, factory/data reset, clean cache, clear dalvik, install latest ics, then install gapps right after,
- reboot system and youre done.
IF you want to go back to your other rom the simplest way is to just kk4 fresh install, install kernal via odin, then isntall your rom.
I always keep all my contacts synced with gmail, and titanium backup any game data or app data i need, and reinstall apps through the market.
hope this helps
capocaccia said:
Yes, Froyo will still boot. If this were a layer cake it would go something like bootloader, kernel, rom. So basically, your bootloader has nothing to do with your kernel or your rom but it is at the bottom layer of the boot process. It does effect which ROMs you can use though as gingerbread and ICS roms require GB bootloaders. So flash the bootloaders, you will still be on Froyo. Update to GB. Root GB. Place the ROM on your internal SD and then flash it. If you run into any problems check the common problems page found on the first page of the SGSICS ROM.
First, if you want to keep any of your apps or contacts backup those as well using Titanium Backup. Make sure to backup to the External SD card or make a copy of the backup somewhere other than the phones internal SD.
Second, you dont have to wipe data/factory reset before you flash. This is only if you have the problem of a bootloop when you try to install. I had this problem and when I did the wipe data afterward it fixed it immediately. So follow this:
1: Boot into CWM
2: install rom
IF you have an issue with a boot loop at this point
1: Get back into CWM using the button combination
2: Wipe data/Factory Rest and Wipe Cach
Click to expand...
Click to collapse
Now can I go strait from Froyo to the ROM i listed in my OP?
okey, so at the end i decided to switch Doc's Master ICS and so far so good thank you all again for your support !!!!
mrnapolean1 said:
Now can I go strait from Froyo to the ROM i listed in my OP?
Click to expand...
Click to collapse
I gone ahead and flashed ICS onto my phone. It is working good but the Hang up button does not work. In order to hang up, i have to lock it and unlock it.
Now i did a Backup of Froyo from within CWM. if I do have a problem, can i go to DWM and restore the backed up Froyo?
Okay I have a Samsung I9000m I got yesterday. I made a copy of my EFS from what I Can tell and copied it to my PC. I currently am Running stock Rogers Firmware 2.3.3 and want to install a 4.0.4 firmware like Dark Knights 3. IS there anything else I need to do or can I just copy it to the root of the phone and install it with clockwork or is there something else I am missing. I go to recovery but it is the stock recovery, this is where I ma thinking I am missing something. The phone is also rooted. Can any one point me in the right direction. And yes I been looking on the forums and not seeing what I need.
Thanks
KillerbawX said:
Okay I have a Samsung I9000m I got yesterday. I made a copy of my EFS from what I Can tell and copied it to my PC. I currently am Running stock Rogers Firmware 2.3.3 and want to install a 4.0.4 firmware like Dark Knights 3. IS there anything else I need to do or can I just copy it to the root of the phone and install it with clockwork or is there something else I am missing. I go to recovery but it is the stock recovery, this is where I ma thinking I am missing something. The phone is also rooted. Can any one point me in the right direction. And yes I been looking on the forums and not seeing what I need.
Thanks
Click to expand...
Click to collapse
If you can not enter CWM Recovery mode, you can not install ICS. You need to install a kernel such as Semaphore (installed with ODIN in box PDA) and you can install it and ICS with no problem.
Oh I forgot, when you go to install ICS, you must remove the MicroSD, but may occur Bootloop.
and backup the the efs folder first!!!
Sounds like clockworkmod is not properly installed.
Revert to stock using odin. Then install CF-root
http://forum.xda-developers.com/showthread.php?t=788108
This will root your stock rom and install clockworkmod.
OK I have a GT i9000 and I did manage to get into CWMode.
Now each time I try to install new custom ROM (I choose the zip from the SD card) 5secs after it starts installing it reboots and winds up in the blue CWM recovery screen. Tried different ROM's but - nada.
Any feedback?
D_NazGUL said:
OK I have a GT i9000 and I did manage to get into CWMode.
Now each time I try to install new custom ROM (I choose the zip from the SD card) 5secs after it starts installing it reboots and winds up in the blue CWM recovery screen. Tried different ROM's but - nada.
Any feedback?
Click to expand...
Click to collapse
You need to update the bootloader to a newer version. Install a 2.3 stock rom first and it should be fine.
Trak-X said:
You need to update the bootloader to a newer version. Install a 2.3 stock rom first and it should be fine.
Click to expand...
Click to collapse
Well I thought 'cause I'm on GB 2.3.3 it is OK.
Do I really need a new bootloader?
UPDATE: I managed to install the ROM. Dunno why, but on the second CWM screen I again choose to install the zip and it did the job.
I was running on froyo before I started process, and now I cannot boot up. This is what I did:
First I used the step 1 in the cyanogenmod wiki (http://wiki.cyanogenmod.com/wiki/Samsung_Captivate:_Full_Update_Guide) to install the ClockworkMod Recovery, everything is fine, until the final reboot step. after the ATT screen, the screen get into total unrecognized mode, and the unit will restart, and so on and on, in a loop.
Then I tried to use the speedmod-K13E with GB bootloader one click, and I still can't get into the system, but now it just stuck at the Galaxy S samsung screen, after the ATT screen, and no loop, just stuck.
Any suggesstions? Is there a stock rom I can restore back to using the external sd card? the internal sd card currently only has the cyanogenmod 9 on it. I have going through the different posts for the past two days, got really confused. If someone can point me to a step by step guide, or something similiar, really appericiated.
BTW, the recovery mode has the following:"ClockworkMod Recovery v2.5.1.0 SpeedMod ULFK
I'm on windows 7 32bit. And I donot need to save any data on the phone. It can be wipe clean.
Did u try rebooting into cwm recovery and try to re install the rom again ?
U may need GB bootloaders as well for cm 9 (?? I'm not sure though)
Sent from my SAMSUNG-SGH-I777 using xda premium
If you still want to run cm9 try flashing a more recent kernel inn recovery. look in the Dev section for glitch kernel or devil kernel (i like devil) they have a more recent version of cwm that should work. I haven't used this method with cm9 but it worked with aokp.
Sent from phone with app
well.. my advice is try reflashing to the stock rom using the one click in this thread [Stock ROMs](OneClicks Master Collection)+[Kernels (Stock & w/ CWM)]+[Modems] UPDATED
(kk4 reccomended)
download one of the odin one click there, and flash your rom back to stock gingerbread, oh yeah, choose the rom without the bootloader.
if that doesn't get you anywhere, please reply to my post.
lan_baba said:
I was running on froyo before I started process, and now I cannot boot up. This is what I did:
First I used the step 1 in the cyanogenmod wiki (http://wiki.cyanogenmod.com/wiki/Samsung_Captivate:_Full_Update_Guide) to install the ClockworkMod Recovery, everything is fine, until the final reboot step. after the ATT screen, the screen get into total unrecognized mode, and the unit will restart, and so on and on, in a loop.
Then I tried to use the speedmod-K13E with GB bootloader one click, and I still can't get into the system, but now it just stuck at the Galaxy S samsung screen, after the ATT screen, and no loop, just stuck.
Any suggesstions? Is there a stock rom I can restore back to using the external sd card? the internal sd card currently only has the cyanogenmod 9 on it. I have going through the different posts for the past two days, got really confused. If someone can point me to a step by step guide, or something similiar, really appericiated.
BTW, the recovery mode has the following:"ClockworkMod Recovery v2.5.1.0 SpeedMod ULFK
I'm on windows 7 32bit. And I donot need to save any data on the phone. It can be wipe clean.
Click to expand...
Click to collapse
You should be good to go. You should be on GB bootloaders. Just reflash CM9 in CWM.
Solved.
For some unknown reason, I can net get ODIN to communication with my device, I tried multiple device, and it seems ODIN just does not work.
I used the 3rd post in your link, with Heimdall I successfully installed the KK4 and then I used the cyanogenmod wiki again, this times it works. It seems the old stock rom won't work for the wiki, must use the new stock rom.
Thanks for all the helps, guys.
irfarf said:
well.. my advice is try reflashing to the stock rom using the one click in this thread [Stock ROMs](OneClicks Master Collection)+[Kernels (Stock & w/ CWM)]+[Modems] UPDATED
(kk4 reccomended)
download one of the odin one click there, and flash your rom back to stock gingerbread, oh yeah, choose the rom without the bootloader.
if that doesn't get you anywhere, please reply to my post.
Click to expand...
Click to collapse
lan_baba said:
Solved.
For some unknown reason, I can net get ODIN to communication with my device, I tried multiple device, and it seems ODIN just does not work.
I used the 3rd post in your link, with Heimdall I successfully installed the KK4 and then I used the cyanogenmod wiki again, this times it works. It seems the old stock rom won't work for the wiki, must use the new stock rom.
Thanks for all the helps, guys.
Click to expand...
Click to collapse
you're welcome,
glad i can help
Would appreciate if someone could help me with my problem - I had earlier used CF-Root to root and install recovery which went off well, took a nandroid backup and then tried to flash CM9 through recovery. WIthin a few seconds it rebooted, showed the Cyanogenmod splash screen and went back into recovery - only this time it was a newer recovery (6.0.0.2) than what CF-Root had installed. I'm not able to install through zip file and for some reason I am not able to restore from nandroid as it says the md5 does not match. So as of now I am stuck in recovery.
To add to this, I realize that I messed up as the instructions said to update to a GB rom if coming from Froyo, which I did not notice. Any idea what I can do from here? If I can still run through this process can someone point me in the direction of a suitable GB ROM I can install? My end goal is to be on CM9, but right now would just be happy to get back to the stock GB ROM as well.
Flash to the stock firmware again? at SamMobile? That is what I did when my device did not boot up after installing CWM recovery and some rom.
skiddyrow said:
Would appreciate if someone could help me with my problem - I had earlier used CF-Root to root and install recovery which went off well, took a nandroid backup and then tried to flash CM9 through recovery. WIthin a few seconds it rebooted, showed the Cyanogenmod splash screen and went back into recovery - only this time it was a newer recovery (6.0.0.2) than what CF-Root had installed. I'm not able to install through zip file and for some reason I am not able to restore from nandroid as it says the md5 does not match. So as of now I am stuck in recovery.
To add to this, I realize that I messed up as the instructions said to update to a GB rom if coming from Froyo, which I did not notice. Any idea what I can do from here? If I can still run through this process can someone point me in the direction of a suitable GB ROM I can install? My end goal is to be on CM9, but right now would just be happy to get back to the stock GB ROM as well.
Click to expand...
Click to collapse
you better use the overcome stock gingerbread safe 5 (the best stock for all situations) google overcome.com and get the files, you will find also a tutorial for how to stock your tab before updating it to overcome or cm9 etc...
If I helped you, please press the thanks button
MarlX said:
Flash to the stock firmware again? at SamMobile? That is what I did when my device did not boot up after installing CWM recovery and some rom.
Click to expand...
Click to collapse
so the reflash from scratch works for you
If I helped you, please press the thanks button
Thanks sos_sifou - worked great! I think I'll stick with the Overcome GB ROM for a while as it works pretty good, and look at CM9 / 10 whenever it gets stable!