Hello,
I searched the forums trying to find answers for several problems, and unfortunately get no answers...
I migrated to Android from WinMo knowing that it has lots of apps, but unfortunately - found nothing that fix the issue.
1. I'm using Bluetooth headset. After pairing the headset I disabled of "MEDIA" (in Bluetooth settings -> Bluetooth headset -> options -> Media (uncheck)
This, to make my Bluetooth operates during a call only... And not to sound any other system sounds.
Unfortunately - after turning on/off bluetooth option in the phone, this "MEDIA" function becomes automaticaly "enabled"...
[Q1] How to make it disabled for all the time?
2. The unsolved problem with screen lock during the call, specially during Bluetooth call... The screen is not locked by default. And if the phone is in pocket, 100% something will be pressed.
[Q2] Does anyone knows the right app to configure the lock-screen behavior and dependencies?
3. HTC Sense 2.1
[Q3] How to disable clock flip?
[Q4] How to disable weather animation?
Thanks.
my friend , just go there , you might find an answer ... http://forum.xda-developers.com/showthread.php?t=933951
demon-resident said:
...
2. The unsolved problem with screen lock during the call, specially during Bluetooth call... The screen is not locked by default. And if the phone is in pocket, 100% something will be pressed.
[Q2] Does anyone knows the right app to configure the lock-screen behavior and dependencies?
Click to expand...
Click to collapse
In Sense ROMs are in the settings the possibilities to avoid your tasks.
3. HTC Sense 2.1
[Q4] How to disable weather animation?
Thanks.
Click to expand...
Click to collapse
Grab your flipclock and delete it. Than place a news clockwidget on your homescreen and you can select oder deselect the weatheranimation.
Related
Hey folks. I found a 'Transformers Sound' for sliding the keyboard. i installed the cab and had this sound. but i dind't like it that much and deinstalled it again. but since then i do not have any sliding sound anymore. I look in settings and all options are turned on. So there is no reason to not function.
Maybe someone can help.
Thx.
maybe try to install it again, and then manually change the sound under settings?
still no change. Doesn't work. Thx though for the tip.
I figured that when the phone is in standby (screen etc. turned off) and i slide the keyboard then the sound is there but as soon as the monitor is on the sounds doesn't come anymore. I am at a loss.
Someone an other idea?
I just posted a thread with a link to the app you need to install to alter the settings so you do not have use the cab method.
i tried the app and it did nothing (for me ).
So i still have the issue that the sound isn't played when openening the keyboard when the screen is turned on.
i think you neeed to change some registry settings. i remember a few threads about changing slider sounds (same applies to tytn 2)
Hey, I just got into flashing roms and such... just moved from CM 10 stable to beast 4.2.1 and everything went great except from settings that got missing which are mainly 3:
1. I joined contacts together with their facebook profile in order to get their picture when calling them but when i flashed the new rom that was gone... any way of keeping it?
2. all my ringtones aren't synced anymore... now when i have someone who used to own a ringtone of his own i got no ringtone at all... same question
3. my entire launcher stayed the same but the widgets aren't working... any way of fixing that?
4. (different question) in the power widget in the notification drawer there was an option to change the time the screen takes to turn off, that option isn't available in the quick settings panel... is there other way to enable it? (besides getting the power widget again)
thanks!
Blackherted said:
Hey, I just got into flashing roms and such... just moved from CM 10 stable to beast 4.2.1 and everything went great except from settings that got missing which are mainly 3:
1. I joined contacts together with their facebook profile in order to get their picture when calling them but when i flashed the new rom that was gone... any way of keeping it?
2. all my ringtones aren't synced anymore... now when i have someone who used to own a ringtone of his own i got no ringtone at all... same question
3. my entire launcher stayed the same but the widgets aren't working... any way of fixing that?
4. (different question) in the power widget in the notification drawer there was an option to change the time the screen takes to turn off, that option isn't available in the quick settings panel... is there other way to enable it? (besides getting the power widget again)
thanks!
Click to expand...
Click to collapse
1. You have to use HaxSync with the Jellybean work-around to sync Facebook contacts/pictures. There may be alternative apps available but this is just what I myself use.
2. Not sure what you are trying to ask. Just go into Sound settings or your music player and set a ring tone.
3. This is normal. I'm assuming they either look like white or black boxes? Just delete and reapply your widgets.
4. Not that I know of.
Kingo64 said:
1. You have to use HaxSync with the Jellybean work-around to sync Facebook contacts/pictures. There may be alternative apps available but this is just what I myself use.
2. Not sure what you are trying to ask. Just go into Sound settings or your music player and set a ring tone.
3. This is normal. I'm assuming they either look like white or black boxes? Just delete and reapply your widgets.
4. Not that I know of.
Click to expand...
Click to collapse
1. found a solution... restored my 4.1.2 contacts storage via titanium and it's working great.
2. What I mean is that when I set a custom ringtone and flash a new rom that ringtone isn't working anymore... (which makes me miss some calls...)
3. oh wellz
4. oh wellz using widgetsoid for that now...
New question (since i can't post in development)... In CM 10 I had Developer Settings in the settings menu... and on beast 4.2.1 i don't have them... is that normal? is there a fix for that?
thanks for you help
I tend to not have vibrate on out night especially this phone, the vibrate is quite loud and the curved back doesn't help when the phone is on my bedside cabinet.
I switched to sound only in sound settings but to my surprise it still vibrated when I received a text via stock sms app, I guess the same would happen if I received a whatsapp message.
Does anybody know how to easily turn off ALL App specific vibrate settings in go? Or would I have to go into each individual app to switch it off?
Thanks
Sent from my HTC One using Tapatalk 2
Great timing, I was just about to post the same question (if it's an answer you want the best I can offer is "No, I don't think you can, at least I haven't found out how, which is why I'm here").
For me it's the alarm, a nice tune to wake up to is great but it's not so nice when the phone spazzes out and bounces all over the cabinet like a runaway chainsaw (over dramatic, moi?). I've not found anything to turn it off and it's really annoying.
Bit of a design flaw really, surely the overall sound settings should be the master, but a setting should allow you to override it via app, I.e if on it allows app settings to use it's own sound settings if off it goes by the master. Maybe that's expecting too much.
Sent from my HTC One using Tapatalk 2
It's worse than that, I don't have vibration switched on for anything, the sound profile is "Normal" (as opposed to Vibrate or Silent) and my in-app settings also have it turned off wherever there's an option to do so but the alarm still sets it off.
I suffer from the same....
flathunt said:
It's worse than that, I don't have vibration switched on for anything, the sound profile is "Normal" (as opposed to Vibrate or Silent) and my in-app settings also have it turned off wherever there's an option to do so but the alarm still sets it off.
Click to expand...
Click to collapse
I tied to install the GE HD3.2 and it has an option to get the alarm without vibration.
when I switched back to Revolution 20.2 this option disappeared......
Just push the stock GE clock app to your system/app folder and set correct permissions and you can turn vibrate off on any Sense ROM ... Best way is to just flash that app in custom recovery, I will post it if anybody requires.
I have a pattern lockscreen, and there used to be an option called vibrate on touch so the phone vibrates on each dot of the pattern.
after the update my XZ still vibrates fine, but my wife's XZ doesn't vibrate on the lockscreen when drawing the unlock pattern anymore and I can;t find the option to turn it back on.
anyone able to help?
thanks!
The option is under Settings -> Sound.
hush66 said:
The option is under Settings -> Sound.
Click to expand...
Click to collapse
Hello
It is not this Option.
We mean only the Vibrate setting in the Lookscreen
Regards
Roger
electric0ant said:
I have a pattern lockscreen, and there used to be an option called vibrate on touch so the phone vibrates on each dot of the pattern.
after the update my XZ still vibrates fine, but my wife's XZ doesn't vibrate on the lockscreen when drawing the unlock pattern anymore and I can;t find the option to turn it back on.
anyone able to help?
thanks!
Click to expand...
Click to collapse
Perhaps your wife has broken her vibrator in some way? The phone is waterproof... Jokes aside, I found the setting on mine (CyanogenMod 10.1, 4.2.2 as well) under Settings > Lock screen > Screen security > Additional options... but it is greyed out!? #noidea
roeschu said:
Hello
It is not this Option.
We mean only the Vibrate setting in the Lookscreen
Regards
Roger
Click to expand...
Click to collapse
I checked and no other option to set vibration except for the one I said above. I also tried setting a pattern unlock and there is vibration on each dot of the pattern. Perhaps you can just tick the option under Settings -> Sound and see if it works?
I have attached a screenshot I found which shows the setting.
It used to be under security settings prior to 4.2
the option is no longer visible after 4.2.2 update.
it seems my wife turned off that option before updating, and it kept the setting. but now it's not possible to turn back on as the setting is no longer there......
hush66 said:
The option is under Settings -> Sound.
Click to expand...
Click to collapse
thanks hush! you were right, it has been moved here.
right at the bottom under sound.
thanks!!
phone vibrates on each dot of the pattern.
electric0ant said:
I have a pattern lockscreen, and there used to be an option called vibrate on touch so the phone vibrates on each dot of the pattern.
after the update my XZ still vibrates fine, but my wife's XZ doesn't vibrate on the lockscreen when drawing the unlock pattern anymore and I can;t find the option to turn it back on.
anyone able to help?
thanks!
Click to expand...
Click to collapse
search and download spare parts plus application from playstore. unckeck haptic feed back there in option
After updating jeally bean there is no option i found to desable it so you guys can use this application to disable vibration on screen lock. it works
100%
thanks!
Hello I have lots of questions
1) is there a way to make active display or tap to wake up phone?
2) on my previous phone if I clicked on the volume key button the phone would turn on?- can I do it on here?
3) there are many more apps like contextual services and lots of other Motorola apps. Which are safe to disable?
4) is there a way to block OTA updates?
5) when you swipe down using two fingers you get the notification pull menus. But when I click the wifi button it opens the settings app and goes to wifi. Can't I edit it so it goes DIRECTLYY to. Toggle wifi?
6) pin on lock screen - on my old phones when I input my pin it unlockes. This is so stupid and takes more longer after inputtingmy pin. I then have to click enter? How do I automate that
1) You can use AcDisplay. You can't tap to wake the phone, a custom kernel would be required for that.
2) Not by default.
3) I leave Assist, Alert, Audio effects, Help and Migrate disabled. I don't know about the rest, but those are safe.
4) Just don't install them. I don't know if you can disable the alerts though.
5) Hold the wifi button . Works with other settings as well, try it out.
6) Well, you could try using an app that replaces your lockscreen which has this feature, such as the Home Screen Lock of Smart App Lock. By default you can't though.
Hope I helped.
Krisshp said:
5) when you swipe down using two fingers you get the notification pull menus. But when I click the wifi button it opens the settings app and goes to wifi. Can't I edit it so it goes DIRECTLYY to. Toggle wifi?
Click to expand...
Click to collapse
I assume you are using Lollipop. The wifi-icon and the SSID are two seperate buttons. Tapping the icon switches wifi on/off. Tap on the SSID and it will take you to settings
I've found that long-pressing the wifi button will toggle it on and off.
hippy dave said:
I've found that long-pressing the wifi button will toggle it on and off.
Click to expand...
Click to collapse
Ah. That must be how kitkat behaves
Yep
mpeL said:
1) You can use AcDisplay. You can't tap to wake the phone, a custom kernel would be required for that.
2) Not by default.
3) I leave Assist, Alert, Audio effects, Help and Migrate disabled. I don't know about the rest, but those are safe.
4) Just don't install them. I don't know if you can disable the alerts though.
5) Hold the wifi button . Works with other settings as well, try it out.
6) Well, you could try using an app that replaces your lockscreen which has this feature, such as the Home Screen Lock of Smart App Lock. By default you can't though.
Hope I helped.
Click to expand...
Click to collapse
Thanks for that, didn't know holding the button toggles it!!! Wish it was more simpler!!!
Bit disapointed thaty I cant use the volume keys! thanks for the help