[Q] 2.3.6 Disables Cellular Connection -- No Signal - Nexus One Q&A, Help & Troubleshooting

Device: Nexus One
Android Version: 2.3.6
Baseband Version (according to settings): 32.41.00.32U_5.08.00.04
Kernel Version: 2.6.35.7-59465-g4bad32
Build Number: GRK39F
Carrier: AT&T (This is an unlocked Nexus One)
So after the most recent update sent out by Google, my phone has been functionally bricked. I have lost all cellular signal and cannot dial anyone, even 911. However, Wifi and Bluetooth functionality remain.
The cell phone for some reason also does not recognize when it is connected via USB, and thus I have had major difficulties attempting to root the phone. Thus far I haven't found any means to root the phone.
Is there any way to fix this mofo? Or should I just get a new phone?
Edit: Also, wrong forum. Apologies. Move to whatever forum is appropriate.

USSVagrant said:
Device: Nexus One
Android Version: 2.3.6
Baseband Version (according to settings): 32.41.00.32U_5.08.00.04
Kernel Version: 2.6.35.7-59465-g4bad32
Build Number: GRK39F
Carrier: AT&T (This is an unlocked Nexus One)
So after the most recent update sent out by Google, my phone has been functionally bricked. I have lost all cellular signal and cannot dial anyone, even 911. However, Wifi and Bluetooth functionality remain.
The cell phone for some reason also does not recognize when it is connected via USB, and thus I have had major difficulties attempting to root the phone. Thus far I haven't found any means to root the phone.
Is there any way to fix this mofo? Or should I just get a new phone?
Edit: Also, wrong forum. Apologies. Move to whatever forum is appropriate.
Click to expand...
Click to collapse
What have you trued so far? Did you try taking out the Sim card and putting it back in? have you tried a hard reset? Also dial *#*#info#*#* and them phone info to see if you are on the right radio.

NexusDro said:
What have you trued so far? Did you try taking out the Sim card and putting it back in? have you tried a hard reset? Also dial *#*#info#*#* and them phone info to see if you are on the right radio.
Click to expand...
Click to collapse
Thanks for the response.
I've tried doing a factory reset (about 3 times now). I've taken out the sim card, put it back in multiple times. I've done multiple power resets, as well as tried loading through the bootloader.
I put the *#*#info#*#* in and the phone info is set right (I believe) to WCDMA preferred.
Also tried to use passimg.zip (2.3.3) on the bootloader, but it didn't detect an image for some reason. At least that's what I read for the half second the bootloader showed something.

Related

[Q] Please Help - Galaxy Note suddenly show "Emergency Calls Only"

Quick background:
- I have an International version, sourced from Latin America
- I have rooted the phone but NOT custom ROM
- I have Straight Talk service
The phone was just working fine for almost 1 month, can receive call, SMS, etc. Just today, I shutdown the phone and took out the microSD card and SIM.
I copied some files to the microSD card using a reader and left the phone with the SIM and battery out for about 30 minutes.
I put the microSD, SIM and battery and rebooted the phone. Suddenly, I got Emergency Calls only!
I have tried to "fix" it but to no avail:
1). Looking at the 3 PIN in the SIM slot, they are all INTACT, nothing bend or broken or lopse
2). The SIM card works - tested it in another 2 different phone and can make calls, etc.
3). I did CWM recovery to a backup from 1 day ago (when the phone still works)
Anyone have this experiences or my phone just DEAD?
weird...
try do the hard reset (try not to restore anything yet), if still doesn't change anything... flash new radio (LC1)
I disassembled my Note using the instructions from here to check if any of the 6 (SIX) SIM Card connector is bent and it is NOT.
I am putting it back together now and will do factory reset (this is what you meant by "hard reset", right?). I will post back with updates/
PS: this is INDEED weird. The phone works OK, Wifi works, sound works, screen works, microSD card is readable, everything works EXCEPT the GSM connection! And I didn't even mess aroud with the custom ROM/kernel/radio!
did u test other sim card on that phone yet?
thehackersz said:
did u test other sim card on that phone yet?
Click to expand...
Click to collapse
I don't have an extra SIM card. What I did was take out the Straight Talk (ST) SIM card from my Note and put it in another unlocked GSM phone (Nokia N73). The Nokia N73 works with the ST SIM.
I just did a "Factory Reset" and still the same thing.
Before I try the radio flash, what will this "software" do to the Note modem? I am just curious how it will fix it.
BTW, my Baseband vesion is "BKK1", and I don't see the radio for this baseband in the link you provided. Which one should I use?
PDA: N7000UBKK2
PHONE: N7000UBKK1
CSC: N7000UWHKK2
flashing the radio doesn't effect your rom... try them.
try to borrow your neighbor sim card first before flash new radio.
thehackersz said:
flashing the radio doesn't effect your rom... try them.
Click to expand...
Click to collapse
Which radio files I should use? The link you provided show multiple radios, but I don't see one for my phone:
PDA: N7000UBKK2
PHONE: N7000UBKK1
CSC: N7000UWHKK2
Try to clean the Sim slot.
Yes, I tried cleaning the SIM slot. I have been very careful with my Note since day 1.
Someone mentioned that they have the same problem and was able to fix it by flashing STOCK ROM back.
I searched in the development section and could not find ROM for my phone (N7000UBKK1). Do you have any idea where I can get this from?
Well, looks like my phone is toast. I have tried the following:
1). Wipe data, cache, Dalvik and restore to CWR backup --> NO GO
2). Do a "factory reset" --> NO GO
3). Install stock firmware using Odin --> NO GO
NOTE: had to search for stock firmware on the Internet since it is NOT available in XDA
The only thing I haven't tried is flashing the modem firmware, but this is NOT available anywhere in XDA either.
The ST SIM card works because I tried this on two other GSM phone. Only the Note show "Emergency Call Only" message.
So now I have a $600 media player that I can't event sell. I guess serves me right for buying an International version with ZERO warranty and just happen that there is NO modem firmware for my phone.
lanwarrior said:
Well, looks like my phone is toast. I have tried the following:
1). Wipe data, cache, Dalvik and restore to CWR backup --> NO GO
2). Do a "factory reset" --> NO GO
3). Install stock firmware using Odin --> NO GO
NOTE: had to search for stock firmware on the Internet since it is NOT available in XDA
The only thing I haven't tried is flashing the modem firmware, but this is NOT available anywhere in XDA either.
The ST SIM card works because I tried this on two other GSM phone. Only the Note show "Emergency Call Only" message.
Click to expand...
Click to collapse
Boy.. That's a serious issue man.
So now I have a $600 media player that I can't event sell. I guess serves me right for buying an International version with ZERO warranty and just happen that there is NO modem firmware for my phone.
Click to expand...
Click to collapse
LOL
Anyhow,
I found out the solution to this problem by accident, and there doesn`t appear to be a solution anywhere else on the internet. Turn off your phone and restart it. As soon as you are able to do so, open up setting, or any other app. When your phone goes into cool down mode, hold down the home button. A screen will come back asking you to select an app. Select whatever you opened prior to cool down mode (If you need to get into settings press the search button and search for settings after your out of CDM). You then need to do two things. Go to Running services (Settings>Applications>Running services), find detect battery service, touch it and stop it. To the best of my knowledge, it doesn`t do anything to your phone, other than activate cool down mode. Then go to manage applications (Settings>Applications>Manage applications) press your menu button and select filter> all applications. Find Battery protect, click on it, and select force stop. This allows your phone to get reception. You will have to do this every time your phone starts up, but it isn`t too much of a hassel for a truely excelent phone. The Cool down mode problem is definitly a software fault.
Source:
askmefast.com/My_galaxy_s2_shows_i_have_signal_but_says_emergency_calls_only-qna1783355.html
I'm also having the same problem and mine is also N7000UBKK1. Anyone know what's going on?
Try another rom. I have it on some roms and some not
Sent from my GT-N7000 using Tapatalk 2
Try the following link
http://forum.xda-developers.com/showpost.php?p=25289773&postcount=207
If you can get into download mode then flash using PC odin
AbyssNotekernel42CWTouchOriginalLogo.tar
If it pass you can flash a GB rom in your sdcard.
HELP!!
I have also had this same problem. My phone is STOCK I have not touched it. got the phone on last Monday working fine until the battery level ran right down yesterday, then I got message to "insert sim card!", ever since re-starting the phone I no longer can make calls!. I had no intension of rooting or messing with this phone and decided to wait until official ICS, but now what do I do?, is this a common problem?.
Tried previous instruction on this post, but unable to find any battery service running on the device.
Please help!!
I now also have this issue after updating to the latest firmware via Kies.
UPDATE: I got mine checked and it looks like the replacement unit I got had its SIM card broken. Dodgy eBay seller.
Just fyi, never insert MicroSim card adaptor in Galaxy Note. Mine works now after spending $100. Jeez
FYI, I tried all of the suggested solutions in this thread and I still have problem. So I returned the Note and got the AT&T version... At least now I got US Warranty
Same thing just happened to my phone. Rogers Galaxy note II.
Tried bunch of different SIM cards, none work.
Got the SIM reader app, phone reads SIM just fine. Data connection also works, but refuses to make voice calls "emergency only".
So pissed, wanna throw this phone against the wall.
Did anyone find a solid solution? Mine did this today, Stock never been rooted or anything! Any ideas?

[Q] Emergency Calls Only after CM install?

I've spent the last few days trying to figure this out without any luck. I have GT-S5830D (Canadian Koodo version) on stock firmware TLKI4, unlocked with SpeakOut sim (which operates on Rogers network).
Android Version: 2.3.4
Baseband Version: S5830DTLKI4
Kernel Version: 2.6.35.7-perf-CL568978 [email protected] #1
Build Number: GINGERBREAD.DTLKI4
PDA: S5830DTLKI4
PHONE: S5830DTLKI4
CSC: S5830DTLSKI4
In this stock firmware, I have no issues at all. Everything works fine, can place calls, WIFI, GPS, data all works. If I flash a new rom to the phone, I can see the networks still show up with signal strength showing okay, but the phone will not place calls. Just says Emergency Calls Only.
I've been reading about everything I can about this phone, and I just can't figure out what the problem is. I have flashed the modem with DDKQ7 and I was able to again place calls, however with this modem firmware, the connection was very unstable and would drop frequently.
Is there an issue with directly updating the stock rom to CM7 or CM9 that would cause problems with this baseband? I was under the impression that baseband wasn't really important. Interestingly enough, I have another phone that is the same make and model and is not experiencing this problem. I feel there must be something I am missing, if anyone can shed some light on this, I would appreciate it.
Thank you.
I have a feeling that I may be the only person that has experienced this issue. Continuing to search the internet for other answers, I've discovered that the baseband is the cause of this issue, but I still don't quite understands how it relates. My other phone is on the stock firmware (TLKI4) and is running CM7 without issue, on the same network even.
Do the APN settings have effect on voice calls too? Or is it strictly for data?
Also, I read a post on here that sounded like there was a limit to how many times you can perform a complete flash with Odin? Is that true? I'd love to keep experimenting, but each time to roll back the stock firmware, I need to use Odin and I'm hesitant due to the thought that will eventually brick the phone.
Thanks again.
tried to flash cm7 again??
Yes. I have installed cm-7.2.0-cooper.zip as well as some of the nightly's and still only get emergency calls only. I have another phone, exactly the same setup, and it works without issue. I even tryed GalaxyICS-latest and the same problem.
Now I did install a different modem firmware, and performed the upgrade and I don't have the issue anymore, however I have other issues, dropped service, 3g doesn't work properly, wifi and mobile data won't switch, gps is has extremely long lock time if it locks at all.
Does anyone here have the D version of this phone from Koodo? Which modem firmwares are you using? Anyone specifically using the phone on SpeakOut? Any hints would be helpful because I'm completely at a loss, will just have to keep it stock until I can figure it out.
I had the same problem as you, don't worry though because there is a solution. The Koodo Samsung Galaxy Ace only receives a signal when using the original Koodo baseband. (Basebands have to do with wireless signal, sometimes referred to as modems.) The good thing for you is that you can use any ROM or firmware you like, as long as after installing it you flash the original Koodo baseband (S5830DTLKI4) using Odin. I found a download link for the baseband in this thread: http://forum.xda-developers.com/showthread.php?t=1381595
After downloading, (I'm assuming you know how to use Odin, if not you can find a guide easily) open Odin, and in the "Phone" section browse to the file and select it. (You will have to extract the ZIP) Then press start and wait until it is finished downloading and that should do the trick. If you need any more help post back because I know what a pain it is to try and get this particular phone rooted and install a custom ROM.
ALSO MAKE SURE TO BACKUP IN CLOCKWORK MANAGER BEFORE FLASHING THIS
cause you never know what can happen.
If I flash CM7, it still shows my baseband being the same. It doesn't appear to have been changed. So what I need to do is flash CM7 and then just reflash the baseband with Odin and it should work? Even though the baseband shows the same? I'll give it a shot and let you know how it works out, but does anyone know why this would be required, to have to reflash the baseband even though it was never changed?
Is your current baseband S5830DTLKI4? Because in my experience that's the only way I could get service unless I was on the Koodo stock ROM.
Sent from my GT-S5830 using XDA
Yes, that is the firmware that I'm on. That firmware was installed with the stock rom that the phone came with and I have not changed it. Although I have changed it before, it fixed the issue with getting 'emergency calls only' in CM7 but the service was so flaky it wasn't worth keeping as a solution. If I leave the firmware from stock DTLKI4 and flash CM7 over it, I end up getting stuck with emergency calls only problem.
Is the current official CM7 not compatible with DTLKI4 firmware? Could that be the problem I'm having? I'm still really confused why this isn't working, but I will try to install CM7 again, and then use Odin to flash the DTLKI4 on top to see if the install is causing any issue with it. It doesn't really make sense.
Alright, interestingly enough, I just flashed it again and all is working as expected. I've flashed this phone about 10 times, using the same files and it would not work.
This time however, what I did differently is not root the phone. I've been using the universal_gb_root_v20.zip to root the phone previously, but I found that rooting before installing CM is waste of time as root is enabled in the CM7 rom already.
Also, when I flashed the stock rom with Odin, it usually used selected the KDO CSC automatically, last time I flashed it came up with TLS CSC and had the Telus branding. I don't know if that made any difference. All I know is that it worked and I am able to make calls and use data without any problems.
Thank you Dynamic_Apple, although your recommendation was not required, it did give me the motivation to try again and that was enough to get it working. I've never had so much difficulty modding a phone in my life, especially a model that I have messed with before.
Glad I was able to help, I had just as much trouble getting mine modded too, it makes me jealous of all the generic Galaxy Ace owners, but it's good to know that you can actually get past Koodo's sneaky limitations.

unlocked HTC Desire C no signal but Data working

Hi everyone,
I have a desire C which was originally on the 3 mobile network, I unlocked it successfully to work with other sim cards and was using it on Orange for a few months.
I have also rooted the phone following the original nameless thread & installed the nameless ROM onto it. This works fine with the ORIGINAL 3 mobile sim card but not with any other sim card. AlI get is no service showing. I cannot make or receive calls, however data works fine (with or without wifi).
I have tried the following:
turning airplane mode on and off, also usin the *#*#4636#*#* (or whatever it is!) thing to get to the test menu and turn off radio and back on again.
Wiping to factory reset
Re-installing the rom from the phones recovery "install zip from SDcard" menu, - also installed the revolution 5en5e rom
IMEI Shows the original IMEI from the phone
If I go to my available networks list it shows me the EE (orange) network, o2 Network, Vodafone network & 3 Mobile network, but no matter which one I select it says your sim card does not allow connection to this network.
I've also tried to change the way it connects from auto to manual and vice versa, but each time it says unable to connect to this network at this time, please try again later.
I just cannot get it to give me signal unless its on the orignal sim & i'm sure the signal is worse than the stock rom.
I'm assuming it's a radio issue?? only assuming as I would have though I would have the error of invalid sim/network locked etc, but I don't know enough about it really.
So currently the phone sits with the following installed:
Android Version:
4.0.3
HTC Sense Version:
4.0
Software number:
ReVoluTion 5en5e Edition v1.0
HTC SDK API Level:
4.2.1
HTC Extension Version:
HTCExtension_403_1_GA_9
Kernal Version:
3.0.16-g51cada9
[email protected] #1
PREEMPT
Baseband Version:
10.11.98.09P_1.06.98.13M2
Build number:
2.00.401.2CL128321 release-keys
Browser Version:
WebKit/534.30
I hope someone can help & if you need more information please let me know!
Kind Regards,
Lee
Try unlocking your SIM again, but while on the new Rom?
Make them boys go loco!
Hi,
I don't get the option to unlock the phone as it accepts the sim, just gives me no signal. Before I unlocked the phone it used to say something along the lines of sim card not accepted, you then had the option to put the codes in to release it from its carrier.
regards,
lee
I had the same problem with my SIM card. Phone is unlocked but one day I see that I don't have any network signal.
So I snoop around trying my friends' SIM cards on my phone and they work.
Went to the office nearby and told them what happened. They said its a malfunctioning SIM card and change it for free.
Now i didn't notice whether I have data traffic working but it resolved my signal problem. Hope this helps.
I've tried 3 different sims on organge and o2 and have the same issue
I've called three mobile (original carrier) and they advise that there is no barring or anything on my profile.
I think I will try to reflash to factory and try again.....I cant think of any other way.
Lee
leeroy1982 said:
I've tried 3 different sims on organge and o2 and have the same issue
I've called three mobile (original carrier) and they advise that there is no barring or anything on my profile.
I think I will try to reflash to factory and try again.....I cant think of any other way.
Lee
Click to expand...
Click to collapse
Flashed boot.img & installed the "untouched__rom_v2.0eu_dcplx1" from this site and it does the same thing!
Does anyone know what else i can do?? or have a three mobile rom I can try?
Lee
Ok, managed to speak with three Tech support again, turns out my profile is not ok.
My phones imei has been blocked by........wait for it.........o2!!!!!
they are speaking with the fraud team and will hear back this week. How bizarre.
I don't understand how another network can block my imei from being on other networks apart from the original one? if it's blocked it's blocked surely....
ah well, will wait for the call back and post up with the outcome.
Lee
Spoke to three today who advise the phone is not blacklisted like they originally stated as they have spoken with O2.
They say there is nothing on my profile to block it and it should work.
I don't know where to go on this now.
Can anyone help please?
Lee

[Q] Unrooting HTC One running 3.04.651.2 with hboot 1.55

Hi All ,
My apologies if there is a solution to my problem in another thread. I have spent countless hours looking for a way to unroot my Sprint HTC One because the Sprint network can't seem to activate it until I do. Or I need to figure out a way to force the Sprint network to accept my MDN and MSID which can "sometimes" be problematic with rooted devices. It might be easier to just unroot and see if that helps getting the phone to properly activate.
Other than the network connectivity issues, the phone is fully functional. Just cant make calls or send texts.
I am running this ROM based on benny's system dump: http://forum.xda-developers.com/showthread.php?t=2467607 so my device information is:
Android version - 4.3
Sense version - 5.0
Software version - benny's 4.3
Kernel version - [email protected] #1 SMP PREEMPT
Baseband version - 1.00.20.0913_3
Build number - 3.04.651.2 CL251863 release-keys
I've tried everything I can think of to get my device unrooted, but none of the RUUs work due to being on hboot 1.55 s-on or having an older firmware version (1.29.xx or 1.39.xx.)
Is there any method I can use to get completely back to un-rooted stock rom with, relocked boot loader (know how to do that part), stock recovery, etc?
I've looked at so many different threads and google searches and all say you need to be s-off and run RUUs of versions that will either cause my touch screen to not work or worse. If anyone can help me it would be amazing and I would be much obliged.
I am having similar issues. I'm about to try this method - http://forum.xda-developers.com/showthread.php?t=2470569&page=3 Read OP and see post#27
jharre08 said:
I am having similar issues. I'm about to try this method - http://forum.xda-developers.com/showthread.php?t=2470569&page=3 Read OP and see post#27
Click to expand...
Click to collapse
Ah yes! The 3.04 version wasn't available the last time I read that post! I can confirm that the other that using the 1.29 and 1.31 versions caused serious issues for me and my phone. This post is actually what led me to learn about the issues due to different firmware and file structure between new and older versions.
I'm downloading now. Let me know how it goes!
tuckprodigy said:
Ah yes! The 3.04 version wasn't available the last time I read that post! I can confirm that the other that using the 1.29 and 1.31 versions caused serious issues for me and my phone. This post is actually what led me to learn about the issues due to different firmware and file structure between new and older versions.
I'm downloading now. Let me know how it goes!
Click to expand...
Click to collapse
Also, check this out - http://qbking77.com/development/how-to-unrootunbrick-the-htc-one-to-stock-2/
It's a bit dated, but I am going to try this method if I can find a 3.04 RUU. Note, he is doing this to an S-On phone, which is what we have. So it SHOULD work:good:
Nothing against the first method I posted, but I'd much rather do a RUU and get a clean slate...
There is no RUU for 3.04 yet ( that I know of)...
this is your best (and pretty much only) option: http://forum.xda-developers.com/showpost.php?p=46565593&postcount=27
Did you ever find a way to resolve this issue? Also did this start after flashing Cyanogenmod? I have the exact same issue and it seems I have exhausted all available resources. Currently have the following setup:
Android version - 4.3
Sense version - 5.0
Software version - 3.04.651.2
Kernel version - [email protected] #1 SMP PREEMPT
Baseband version - 1.00.20.0913_3
Build number - 3.04.651.2 CL251863 release-keys
Noticed that the phone is unable to update PRL correctly. Version will switch from 00000 to 1 to 55016. I am also unable to commit changes to any EPST settings (which is the first thing sprint tried to do). MDN and MSID both currently say 'no' and I can't update.
I'm having the exact same issue with everything working fine but no calls/texts.
I flashed the Guru reset for 3.04 but still no calls/text.
Any other solutions?
kindabizzie said:
I'm having the exact same issue with everything working fine but no calls/texts.
I flashed the Guru reset for 3.04 but still no calls/text.
Any other solutions?
Click to expand...
Click to collapse
Try the following:
Full wipe. Flash the newest stable CM.
Go into Settings > More... (under Wireless & Networks) > Mobile networks > CDMA subscription:
Confirm the following settings:
Network mode = LTE/CDMA/EvDo
CDMA subscription = NV
After you confirm these settings, switch the network mode to CDMA/EvDo only and then back to LTE/CDMA/EvDO.and give it a minute or so, you should see 3G/Phone availability come back. You can test this by dialing a number. You should be able to make a call, or at least get the default Sprint "device is not activated" recording. After confirming this, you can do another wipe and flash back to a stock ROM. You should now have mobile network connectivity back. You may need to Activate the phone again and update the profile/PRL to get back to 100%.
jjmckaskie said:
Try the following:
Full wipe. Flash the newest stable CM.
Go into Settings > More... (under Wireless & Networks) > Mobile networks > CDMA subscription:
Confirm the following settings:
Network mode = LTE/CDMA/EvDo
CDMA subscription = NV
After you confirm these settings, switch the network mode to CDMA/EvDo only and then back to LTE/CDMA/EvDO.and give it a minute or so, you should see 3G/Phone availability come back. You can test this by dialing a number. You should be able to make a call, or at least get the default Sprint "device is not activated" recording. After confirming this, you can do another wipe and flash back to a stock ROM. You should now have mobile network connectivity back. You may need to Activate the phone again and update the profile/PRL to get back to 100%.
Click to expand...
Click to collapse
Didn't work man, thanks though. My data is fine, I just can't call/txt...it's really bizarre...
kindabizzie said:
Didn't work man, thanks though. My data is fine, I just can't call/txt...it's really bizarre...
Click to expand...
Click to collapse
Hmm. That's pretty much the issue that I had except 4G/Wifi was working and 3G/Call/Text didnt seem to be. You might try switching the CDMA mode to SIM and then back to NV to make sure the setting takes. I know CM can be really finicky with network changes.
tuckprodigy said:
Hi All ,
My apologies if there is a solution to my problem in another thread. I have spent countless hours looking for a way to unroot my Sprint HTC One because the Sprint network can't seem to activate it until I do. Or I need to figure out a way to force the Sprint network to accept my MDN and MSID which can "sometimes" be problematic with rooted devices. It might be easier to just unroot and see if that helps getting the phone to properly activate.
Other than the network connectivity issues, the phone is fully functional. Just cant make calls or send texts.
I am running this ROM based on benny's system dump: http://forum.xda-developers.com/showthread.php?t=2467607 so my device information is:
Android version - 4.3
Sense version - 5.0
Software version - benny's 4.3
Kernel version - [email protected] #1 SMP PREEMPT
Baseband version - 1.00.20.0913_3
Build number - 3.04.651.2 CL251863 release-keys
I've tried everything I can think of to get my device unrooted, but none of the RUUs work due to being on hboot 1.55 s-on or having an older firmware version (1.29.xx or 1.39.xx.)
Is there any method I can use to get completely back to un-rooted stock rom with, relocked boot loader (know how to do that part), stock recovery, etc?
I've looked at so many different threads and google searches and all say you need to be s-off and run RUUs of versions that will either cause my touch screen to not work or worse. If anyone can help me it would be amazing and I would be much obliged.
Click to expand...
Click to collapse
You may need to flash a stock rom and manually enter you MDN and MSID using the epst menu
no luck
At this point I have not had any luck solving this issue. I used Guru's reset tool as well and believe the problem is the radio firmware. I spent a good deal of time on the phone with Sprint support and with a surprisingly competent technician in the store. He tried to work with multiple different systems they have available to get the phone to recognize the Sprint towers with no success.
He said that the phone just isn't recognizing them in any way and commented that a phone that isn't activated will still show bars of service because the phone gets the signals from nearby towers, but just doesn't know what to do with the signal until activated. In my case, all I see is the "X" above the signal bar graphic.
If you're experiencing the same issue as me, there is nothing Sprint can do to make the phone recognize their towers based on the conversations I've had. I saw my options as:
1. Wait for an RUU to come out or something like that
2. Try out different ROMs - jjmckaskie suggested the newest CM, but I would think others might be worth trying as well. Basically anything that uses different radio firmware
3. Get a new phone - This is the option I've gone with. Since my phone is running a stock ROM and the guy at Best Buy where my insurance is from, didn't check the bootloader (would have said "tampered" and "unlocked"), he assumed I never voided my warranty and sent out for a refurb. This may not work if your insurance is through Sprint though. I'm not sure how thorough they are.
tuckprodigy said:
At this point I have not had any luck solving this issue. I used Guru's reset tool as well and believe the problem is the radio firmware. I spent a good deal of time on the phone with Sprint support and with a surprisingly competent technician in the store. He tried to work with multiple different systems they have available to get the phone to recognize the Sprint towers with no success.
He said that the phone just isn't recognizing them in any way and commented that a phone that isn't activated will still show bars of service because the phone gets the signals from nearby towers, but just doesn't know what to do with the signal until activated. In my case, all I see is the "X" above the signal bar graphic.
If you're experiencing the same issue as me, there is nothing Sprint can do to make the phone recognize their towers based on the conversations I've had. I saw my options as:
1. Wait for an RUU to come out or something like that
2. Try out different ROMs - jjmckaskie suggested the newest CM, but I would think others might be worth trying as well. Basically anything that uses different radio firmware
3. Get a new phone - This is the option I've gone with. Since my phone is running a stock ROM and the guy at Best Buy where my insurance is from, didn't check the bootloader (would have said "tampered" and "unlocked"), he assumed I never voided my warranty and sent out for a refurb. This may not work if your insurance is through Sprint though. I'm not sure how thorough they are.
Click to expand...
Click to collapse
Dang, and I was gonna go to a Sprint store after work. *Sigh* guess I have NO CHOICE but to get a Nexus 5 now, lololol
kindabizzie said:
Dang, and I was gonna go to a Sprint store after work. *Sigh* guess I have NO CHOICE but to get a Nexus 5 now, lololol
Click to expand...
Click to collapse
As a last resort you could also try the hard reset code from your dialer by entering ##72786# . You will need to be on a stock rom. You will also need your MSL code (you can usually get this from Sprint support). This will reset EVERYTHING so be mindful. It will also force a hands free activation/Profile/PRL update after the phone reboots which is sometimes useful.
jjmckaskie said:
As a last resort you could also try the hard reset code from your dialer by entering ##72786# . You will need to be on a stock rom. You will also need your MSL code (you can usually get this from Sprint support). This will reset EVERYTHING so be mindful. It will also force a hands free activation/Profile/PRL update after the phone reboots which is sometimes useful.
Click to expand...
Click to collapse
I still took it to Sprint just to see and they fixed it. Downside is my GPS and LTE is messed up again (Me trying to fix those things is the reason all this happened in the first place) but I'd rather not have GPS than not have phone capabilities on my phone (And LTE in Los Angeles is garbage anyway). I think I'm gonna leave my phone alone for a while tho, lol.
jjmckaskie said:
As a last resort you could also try the hard reset code from your dialer by entering ##72786# . You will need to be on a stock rom. You will also need your MSL code (you can usually get this from Sprint support). This will reset EVERYTHING so be mindful. It will also force a hands free activation/Profile/PRL update after the phone reboots which is sometimes useful.
Click to expand...
Click to collapse
Looks like I am going to go this route. I hit ##72786# and it takes me to SCRTN screen. I'm guessing I just hit menu in the top right, then reset? Then it will prompt me for my MSL code?
jharre08 said:
Looks like I am going to go this route. I hit ##72786# and it takes me to SCRTN screen. I'm guessing I just hit menu in the top right, then reset? Then it will prompt me for my MSL code?
Click to expand...
Click to collapse
Yup. I actually dont remember if it does a full wipe, or just forces an activation/profile/PRL update. But either way it's worth a shot.
tuckprodigy said:
At this point I have not had any luck solving this issue. I used Guru's reset tool as well and believe the problem is the radio firmware. I spent a good deal of time on the phone with Sprint support and with a surprisingly competent technician in the store. He tried to work with multiple different systems they have available to get the phone to recognize the Sprint towers with no success.
He said that the phone just isn't recognizing them in any way and commented that a phone that isn't activated will still show bars of service because the phone gets the signals from nearby towers, but just doesn't know what to do with the signal until activated. In my case, all I see is the "X" above the signal bar graphic.
If you're experiencing the same issue as me, there is nothing Sprint can do to make the phone recognize their towers based on the conversations I've had. I saw my options as:
1. Wait for an RUU to come out or something like that
2. Try out different ROMs - jjmckaskie suggested the newest CM, but I would think others might be worth trying as well. Basically anything that uses different radio firmware
3. Get a new phone - This is the option I've gone with. Since my phone is running a stock ROM and the guy at Best Buy where my insurance is from, didn't check the bootloader (would have said "tampered" and "unlocked"), he assumed I never voided my warranty and sent out for a refurb. This may not work if your insurance is through Sprint though. I'm not sure how thorough they are.
Click to expand...
Click to collapse
Sounds like you solved your issue, but for anyone else having trouble....
I re-tried GURU's reset and it worked. The first time I downloaded it over the 4G network. I also downloaded the OTA over the 4G network. My radio has been giving me fits ever since. Finally, I downloaded GURU's reset over WIFI, then made sure the OTA downloaded over WIFI, and my phone is like new again! No radio issues, everything is perfect. Hope this helps some people...

[Q] After flashing: Network weak, only Edge, no modems work

First time poster, long time lurker, absolute phone novice.
I am using a i9305 (Hong Kong model, bought from Kogan Australia). I am based in Malaysia. Before all this I just popped my sim card in and utilised the stock ROMs. No issues with 4G or network whatsoever, but the phone got really slow after 4.3 to I decided to install CM11 using Heimdall.
Long story short, I absolutely screwed it up, and the phone showed the "software fail" screen. After scouring XDA and undertaking a number of fixes which didn't work (I'm scared this is what screwed my phone), I finally worked out to flash the Hong Kong stock 4.3 ROM using Odin,which brought my phone back to me. However, now I can only pick up Edge and barely get network reception. It is definitely not a sim issue as my sim in my wife's identical i9305 picks up 4G and network within a second of switching on.
I've searched every thread but cannot find an answer which works.I've flashed a whole bunch of modems but to no avail. I hope I haven't screwed my phone. Threads I've utilised include:
http://forum.xda-developers.com/galaxy-s3/help-i9305/s3-lte-i9305-3g-4g-2g-wokring-help-t2246437
http://forum.xda-developers.com/galaxy-s3/help-i9305/i9305-stuck-edge-3g-lte-t2655315
http://forum.xda-developers.com/galaxy-s3/help-i9305/i9305-2g-3g-4g-t2847184
I'm at a loss. I haven't factory reset my phone again (yet), but that is a kind of last resort. Does anyone have any suggestions?
kirikee said:
First time poster, long time lurker, absolute phone novice.
I am using a i9305 (Hong Kong model, bought from Kogan Australia). I am based in Malaysia. Before all this I just popped my sim card in and utilised the stock ROMs. No issues with 4G or network whatsoever, but the phone got really slow after 4.3 to I decided to install CM11 using Heimdall.
Long story short, I absolutely screwed it up, and the phone showed the "software fail" screen. After scouring XDA and undertaking a number of fixes which didn't work (I'm scared this is what screwed my phone), I finally worked out to flash the Hong Kong stock 4.3 ROM using Odin,which brought my phone back to me. However, now I can only pick up Edge and barely get network reception. It is definitely not a sim issue as my sim in my wife's identical i9305 picks up 4G and network within a second of switching on.
I've searched every thread but cannot find an answer which works.I've flashed a whole bunch of modems but to no avail. I hope I haven't screwed my phone. Threads I've utilised include:
http://forum.xda-developers.com/galaxy-s3/help-i9305/s3-lte-i9305-3g-4g-2g-wokring-help-t2246437
http://forum.xda-developers.com/galaxy-s3/help-i9305/i9305-stuck-edge-3g-lte-t2655315
http://forum.xda-developers.com/galaxy-s3/help-i9305/i9305-2g-3g-4g-t2847184
I'm at a loss. I haven't factory reset my phone again (yet), but that is a kind of last resort. Does anyone have any suggestions?
Click to expand...
Click to collapse
Have you tried wiping your cache in stock recovery (or whatever recovery you have, I can't really tell from your post)? I think you had problems with CM11 since you likely dirty flashed (no wipe of cache, data and system) and used Heimdall instead of flashing it through a custom recovery.
Possible answer
kirikee said:
First time poster, long time lurker, absolute phone novice.
I am using a i9305 (Hong Kong model, bought from Kogan Australia). I am based in Malaysia. Before all this I just popped my sim card in and utilised the stock ROMs. No issues with 4G or network whatsoever, but the phone got really slow after 4.3 to I decided to install CM11 using Heimdall.
Long story short, I absolutely screwed it up, and the phone showed the "software fail" screen. After scouring XDA and undertaking a number of fixes which didn't work (I'm scared this is what screwed my phone), I finally worked out to flash the Hong Kong stock 4.3 ROM using Odin,which brought my phone back to me. However, now I can only pick up Edge and barely get network reception. It is definitely not a sim issue as my sim in my wife's identical i9305 picks up 4G and network within a second of switching on.
I've searched every thread but cannot find an answer which works.I've flashed a whole bunch of modems but to no avail. I hope I haven't screwed my phone. Threads I've utilised include:
http://forum.xda-developers.com/galaxy-s3/help-i9305/s3-lte-i9305-3g-4g-2g-wokring-help-t2246437
http://forum.xda-developers.com/galaxy-s3/help-i9305/i9305-stuck-edge-3g-lte-t2655315
http://forum.xda-developers.com/galaxy-s3/help-i9305/i9305-2g-3g-4g-t2847184
I'm at a loss. I haven't factory reset my phone again (yet), but that is a kind of last resort. Does anyone have any suggestions?
Click to expand...
Click to collapse
When you wipe the whole system to change to another rom, there is always a good chance that you can lose the modem during the process. Rom's may come with their on custom modem , but may not be fully compatible. try to download and flash with odin the modem of the stock rom once again. Your problem is related with the modem
Sorry for not responding, I was in Korea for work and left the bad phone back at home for the past 3 weeks.
I tried the clearing cache, but no good.
I will try flash the stock modem now (see below I notice the difference).
I noticed while syncing my google account that the IMEI on my phone had changed. Would this have anything to do with the issues I am facing? The below is my "before and after".
Model: GT-I9305
Hardware Id: 354720053386061
Android Version: 4.3
Build Number: JSS15J.I9305ZHUCNB1
Kernel Version: 3.0.31-2569006
Baseband Version: I9305ZHUCNB1
Last Sync: 16 Aug, 2014 07:36 PM (the day I stupidly started this process)
Registered: 30 Aug, 2013 10:50 AM
Model: GT-I9305
Hardware Id: 42f7ce0338e89f73
Android Version: 4.3
Build Number: JSS15J.I9305ZHUCNB1
Kernel Version: 3.0.31-2569006
Baseband Version: I9305XXBMA2
Last Sync: 2 Oct, 2014 01:29 AM
Registered: 20 Aug, 2014 01:28 AM (the day I installed the stock Hong Kong software and got it back working)
Status: Active
Stock modem didn't work.
Factory reset, odin flashed the stock software again (with the stock modem). Same issue.
Followed instructions on this page for missing IMEI: http://forum.xda-developers.com/gal...warning-guide-backup-restore-imei-nv-t1946915
Tried *#06# but still no IMEI.
Any solutions?
Tried everything I read in lyquidperfection's awesome mega-thread, but nothing works. still got a /01 when I type *#06# and in the 'about' section it now shows IMEI: Unknown.
Everything else works fine, just the internet is stuck on Edge.
so I tried a few more things today but to no avail.
The IMEI shows up as "Unknown" in the phone settings and when I do *#06* I get a /01 message.
However, when I check my IMEI against my Google account, I get the above number.
Any suggestions as how to fix?
as of today, new modem is being release. I9305XXUFNI3
info here
for modem u can read this
download links from page, or this link
im quite new, but i hope this helps.
Thanks. Didn't work, still Edge.
Going to try flash again.
You could try running a different country's stock ROM, or maybe seeing whether you get 4G while using a custom ROM (Liquidsmooth maybe).
kirikee said:
Thanks. Didn't work, still Edge.
Going to try flash again.
Click to expand...
Click to collapse
it seems u're not the only one. later i found this thread, someone found a solution.
try read post #48 here , http://forum.xda-developers.com/galaxy-s3/help-i9305/s3-lte-i9305-3g-4g-2g-wokring-help.....
i guess its realated to IMEI. try find one. im not sure how.
Great success
GREAT SUCCESS.
Follow this post: http://forum.xda-developers.com/gal...te-i9305-3g-4g-2g-wokring-help-t2246437/page5
1. Restore a working QCN backup (like this one) http://www.mediafire.com/download/4j...4_19-53-39.rar through the download tool of the QPST suite
2. Change the IMEI to match yours. <<<<. DON'T SKIP THIS STEP. There are many way to do this, i used RF NV manager. I can't be more specific since this topic is off-limits on XDA.
3. Perform a factory reset.
I can't test LTE connection, because where I live there is no coverage, but I'll try as soon as I can.
Click to expand...
Click to collapse
For absolute n00bs like me:
Step #1, use QPST Suite from this thread to install the QCN backup as per above: http://forum.xda-developers.com/gal...warning-guide-backup-restore-imei-nv-t1946915
Step #2, uninstall QPST, follow this thread (post #4): http://rootzwiki.com/topic/32397-tutorial-imei-backup-nv-with-qpst-us-variants/
>> I didn't have the US version LTE phone, but it works on my LTE International
Step #3, go into recovery and wipe cache and factory reset.
>> *#06# should show your imei, and your 4G should be back. mine came back instantly two months of pain over!!!!!!!!

Categories

Resources