Related
After a hard reset on the TyTn my computer is no longer detecting it when I connect the phone to USB cable. The computer makes a sound when I connect it, but Windows Mobile Device Centrer say that TyTn II is not connected, and it does not show up in My Computer eather.
I've tryed to delete the partnership and reconnect the phone, but nothing happens.
Can anyone help me please! Now I cant install any of my programs og transfer files between the computer and the pocket pc/phone.
Try this:
tap Start > Settings > Connections.
tap USB to computer.
Uncheck the Enable advanced network functionality box
Try this:
tap Start > Settings > Connections.
tap USB to computer.
Uncheck the Enable advanced network functionality box
I uninstalled Windows Mobile Device Centrer and then tryed the tip you described here. At first it looked ok, my computer detected the device and installed the drivers and reinstalled Windows Mobile Device Centrer.
But my device is still not showing up in Windows Mobile Device Centrer or My Computer
Check your personal firewall settings and open the ports MS asks you to at the Windows Mobile home/support page...
Go into task manager & see if Activesync is running. I have the same problem with my tilt & if I kill activesync then reattach it takes a moment the first time, but then it works.
Make sure you are running the latest version of WMDC. I absolutely could not get WMDC to work with my HTC Wizard for months. After MS came out with an updated version of WMDC (around June, I think) it started working fine.
If you absolutely can't get it to work, consider using emoze for over the air syncing of cal, contacts, mail, etc. (or an on-line exchange account.) I had to do that for a few months until I got it to work. Emoze has the advantage of being free. Unfortunately, neither will allow file syncronization, tho.
There is no activesync running.
And everything was working just fine before my device went "mental" and I had to hard reset. So before the hard reset I could use WMDC on this computer, transfer files and run active sync. But now I cant.
I also got an online exchange account so I can sync calender and contacts. But I want to be albe to transfer files to my computer and install new software.
My WMDC version is: 6.1.6965
Some more info about the computer may help. For instance, I take it from your usage fo Windows Mobile Device Center that you are running Vista. In any case, since the problem is with the computer and not the Kaiser, I would see if the manufacturer would provide some support.
Yes, im running Vista and I buildt the PC my self.
But Im not sure its realy the PC that is the problem, because I made the changes (Hard Reset) to the device and thats what caused the problem.
Anyway, I was hoping for some way to debug/troubleshoot this problem.
I am having the same problem. I sync to any one of 8 computers at work and one at home. Work runs XP PRO and Home VISTA Ultimate x64 all worked fine untill this week. I have not made any changes since the last sync, the computers know it's hooked up due to activesync opening and trying to connect when I plug in via USB. But it never connects. I want to flash to Dutty's newest ROM but can't connect. I sync all contacts and e-mail wirelessly but need the computer to flash (I do not have a sd card yet) Any idead would be great! I have tried the ideas listed above but no joy. I have not hard reset the device as of yet ( I need some things off of it first)
Steve
BUMP
I really need help with this!!! I'm pulling my hair out!
Did any of you that had this problem find a solution? I have the exact same issue except a hard reset will fix it for a while, and then the problem will reoccur a few months later. No software has been added during the time frame. Very annoying.
i've got just the same problem! plaese help us!
i'm not able to install wmdc. it says it is for vista only. i'm currently on winxp. tried to install it via the disc provided..
lipanz said:
i'm not able to install wmdc. it says it is for vista only. i'm currently on winxp. tried to install it via the disc provided..
Click to expand...
Click to collapse
omg!
try activesync for XP. It came with the phone or you can download it from.
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx
Hello I've read around on this problem, and I cant find a fix for it. Orange UK HTC Diamond, I don't have the driver CD or anything but it seems it should be stored on the device itself.
I plugged it into my laptop (Vista x32 Home Premium), and first time it comes up with "Uknown device installed. Searching preconfigured drivers." It closes and nothing happens.
I have WMDC 6.1 installed, and have unchecked advanced network functionality.
If I install XP on a VMware virtual machine, will I be able to activesync to that ? (eventually I want to install HardSPL etc.)
Anyway, and hints/tips would be amazing.
vista and diamond
I just got my Diamond this weekend, I was upgrading from an HTC P4000. I was out of town (my home pc is XP) so I decided to sync my contacts over his vista machine (btw can this be done easily pda to pda? bluetooth?) The P4000 had trouble syncing with vista, took a few tries. After outlook at all my stuff from my old phone, I put my Diamond in and... nothing. Didn't see it, but it was charging. I fought Vista for about an hour to get it working, I had to download a windows mobile center patch off of microsoft, and restart the computer+phone.
When I got home to my XP machine, I plugged in and activesync took care of everything.
All the advice I can give you is try uninstalling your phone drivers (in device manager) and try different usb ports, and restart.
heres a link to the MS troubleshooting page I tried:
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-troubleshooting.mspx
Hmm I'm starting to think it might be the standard USB connection that I'm using, do I need to use the standard HTC cable?
I've just tried phone on XP, and its bringing up the same error with Activesync 4.5
It is well-known that in vista you have to download, and install, Windows Mobile Device Center to sync any WM device, even PPCs.
So what's the deal?
Hey i'm also having this problem, spent ages trying to get it to work and tried
uninstalling and reinstalling everything but just get a message on the phone saying
install ActiveSync 4.5 on PC even though im using Vista.
Any ideas??
saj31 said:
Hey i'm also having this problem, spent ages trying to get it to work and tried
uninstalling and reinstalling everything but just get a message on the phone saying
install ActiveSync 4.5 on PC even though im using Vista.
Any ideas??
Click to expand...
Click to collapse
You can't use ActiveSync on VISTA!!! Can't you read the MANUAL or make a search?! Install Windows Mobile Device Center from MSFT site.
For God's sake, use the included CD, it has ALL you need to start synching.
I have x64 Home Premium, and it worked out of the box.
I'm happy for you but the first thing I did was install WMDC6.1, as stated in my first post, and as I said it isn't syncing with activesync on XP either
Hi I recently upgraded to Vista from XP.
I remember in XP when I connect my diamond via usb Activesync would automatically run and sync the pim data.
however in Vista it seems like I have to connect the phone and then run WMDC in order to connect and sync.
is there a way to make it sync automatically like XP?
Try reinstalling WMDC. Vista should have it start up every time your phone is connected.
If that doesn't work, try adding WMDC to your Startup folder in the "All Programs" list. This will keep it running in the background but it will sync your phone each time it is connected.
Hope it works!
WMDC doesn't start automatically when i connect.
if I put WMDC into startup folder it would start but if I close its window (x button right coner)
it'd be off for good (meaning I have to manually run it again to sync)
I do have the sync icon in thee system tray tho.
it just doesn't sync automatically
I am perfectly aware of this. It must be a bug in WMDC because I'm on a Mac with VMWare and VMWare will have Windows start up WMDC without a hiccup.
re installing it for the 3rd time did it, I don't know why but it works now, it syncs automatically 40 seconds after I connect the device
after reboot it's back to Manual sync ode again..
man, this thing is really frustrating
Hi
In my regstry i have the following and it works well for me I have not had a problem.
look in
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
in there is
Windows Moblie Device Center
key = REG_EXPAND_SZ
with %windir%\WindowsMobile\wmdc.exe
yes I have that on my registry too
Ever found a solution? It seems that I am experiencing the same problem.
Does Sync Center recognize your device after connecting it like on the attached picture?
Hi, I have install windows 7 rc , and i cant have my contacts in diamond to sync with outlook. It seems active sync is not compatible with win7 . Is there a solution ? Thanks ,
in win 7 is no active sync... you have to use mobile device center
hi
this works for me on windows 7 you can download it from here
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-download.mspx
When you connect your diamond to win7, it will automatically download drivers and mobile device center . To get Outlook is your own responsibility. You probably have a 30 day trial version on one of the disks that followed your phone, but it will still sync after those 30 days.
EDIT: I have no clue wether the trial version works in win7 or not.
cobbs said:
hi
this works for me on windows 7 you can download it from here
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-download.mspx
Click to expand...
Click to collapse
Ι downloaded the above. I didnt see nothning to change. I have installed Windows Mobile Device Center and it looks to work ok. I see diamond from the pc as a hard disc, and i can use it. I also have internet to diamond throw the pc. The phone is recognized by the pc as Touch Diamond P3700, and i have the icon of sync sender in taskbar. What I dont have? The one i am interested more.. My contacts to outlook to pc.. I have installed office 2003 to the pc , and i have outlook 2003. There , contacts are empty.
I dint see to Windows Mobile Device Center to have any option to transfer contacts from phone to outlook.. Any help ?
edit... Ok I just solve it. I went mobile device settings-change content sync settings. In contact there a press sync settings ,and there it writes synconize from Pc1 Pc2. Only one was "ticked" I tick and the other , and contacts went to my pc... Very complicated i think..
Hi, I'm on Windows 7 64 bit build 7100. Trying to get my phone to sync, have installed WMDC 6.1 64 bit version, plug my Diamond in and Windows Update fails on trying to install the driver, just get PocketPC USB Sync in Device Manager with a status of "This device cannot start (Code 10)."
Any ideas where I am going wrong on this? Had no issues on Vista 64bit getting it to work, have repeated all the same steps so am scratching my head somewhat.
Edit: Solved it, turns out it was my USB extension lead, tried plugging directly into the computer and it worked perfectly lol
Windows 7 ActiveSync Fix
Hey Everyone,
There is a good write-up on how to Enable ActiveSync on Windows 7 x64 and x86.
http://capitalhead.com/articles/ena...synchronization-on-windows-7-x64-and-x86.aspx
Have fun,
Mike
good to go
seems to be working good now RC.
Stephen Lane wrote:
I think I have researched all the treads on this pretty well now & I've tried all the above including rolling back to before I 1st allowed the WDM to install to no avail. I still can't get my Diamond talking to W7 WDM still talks to my old Vista Ult machine though.
Everything looks good the updater downloads drivers then the WDM then the installs happen the device gets found and it sort of knows its a HTC device plugged into a USB port but WDM and Sync Center both don't believe its there.
I've tried resetting the Diamond complete reboots of the computer, I've changed all settings in the PC to USB menu on the Diamond (another thread) and this only changes the Device from Generic Serial to Generic NDIS but still WDM won't connect.
So has anyone got any further suggestions I can't believe its this hard every one else has no probs what might I be doing wrong (I think the fact the device is a Generic Serial not a Diamond might be a hint but I can't prove it)
Regards
Stephen Lane
Stephen Lane,
I have exactly the same problem. Did you found a solution or still facing this problem?
You can use Microsoft Windows Mobile Device Center 6.1. It's free to download by MS.
Gr.,
Dennis
Thanx alot people! This thread saved my day!
WMDC does not recognize my G1. He detect that there is a unidentified device and searching the driver to web but after a minute it was NOT successfully installed. How come? LOL.
Hi, not sure if this is the correct forum for this, so apologies if not.
I'm trying to get my Kaiser to synce with my pc, i've set up a partnership and it connects and starts to sync but always gets an error which is only ever described as "network error or internal desktop error" which isn't very clear as to the problem or possible solution.
I'm running Vista, with Mobile Centre 6.1, and Windows Mobile 6 Pro. I used to be using Outlook 2002 on the PC, but having recently rebuilt it am now using Outlook 2007, with the same .pst files and email. My phone won't sync the email anymore, it does everything else fine as long as i remove the email from the sync settings. I've tried setting up a nw partnership, and deleted the old partnerships from both the phone and PC but it doesn't make any difference.
It used to work fine before i had to reinstall my OS and everything on the PC, which is quite frustrating !
Can anyone shed any further light on this for me please ?