HELP !! STUCK on system recovery 2A - Captivate Q&A, Help & Troubleshooting

so im new here in the forums just trying to learn everything and i flashed this file : Voodoo-lagfix-3.0-SGH-T959-update and now im stuck in the system recovery mode .. i have tried oneclick unbrick and it didnt work .. please help !

That is for a vibrant, the model number for the captivate is I896(Canada) I897(America)
At this point you need to get into download mode and flash a stock firmware with either Odin or heimdall.

Related

I9000 rom on i9001

Moin
I Have a easy Question....
Is it possible to flash an i9000 rom on the i9001
because i want flash darknight 2.1 rom with android 4.0.4
thank a lot for answers
Lump800
Do not do such things! ! ! Your phone may already be obsolete. I9000 and i9001 is a very different phones! ! !
Wysłane z mojego GT-I9001
Thank you kept me in front of a large error.
I had almost a door-stopper beautiful.
translated by google translator
sorry for that my english in not the best
Noo nooo and noooooooo. this is the fastest ticket to a broken phone
don't even think about it
is it possible to flash i9001 file to i9001 after i9000 firmware
it possible to flash i9001 file to i9001 after i9000 firmware. i had accidently flashed i9000 firmware on i9001 . now i want to flash it back to orginal firmware . is there anyway to rescue it
thanks a lot
darkeye said:
it possible to flash i9001 file to i9001 after i9000 firmware. i had accidently flashed i9000 firmware on i9001 . now i want to flash it back to orginal firmware . is there anyway to rescue it
thanks a lot
Click to expand...
Click to collapse
should be possible, you need to find the oldest possible stock rom and try flashing it with AiresVE.ops , MultiLoader Odin v.4.43
This happened to me, someone flashed cm for i9000 on i9001 and it worked for a while but it progressively started crashing, i took that phone and tried flashing stock but never could get pass setup connection in odin 4.43, tried all the variations (driver reinstall, new cable, remove battery, other PC etc) and in a hail marry attempt i managed to flash i9000 stock witch odin 1.83. Phone now works, enters download and recovery mode, but i still cant get past same error in odin 4.43 or flash custom recovery i any way (verification error from update method, adb flash just doesnt stick). ROM manager sees some custom recoveries but i cant enter them, my guess is because of different pit file from i9000.
Havent tried flashing i9001 rom with odin 1.83 because i cant use ariesve.obs from 4.43, i managed to connect to phone with heimdall and download pit, so that kind of connection works. My guess is that if i could somehow create pit file for this phone that works with heimdal i could flash proper stock rom, so im here to ask is it possible and how would i do it ?

[Q] devolpers help me plz

hi
i update my phone ota on 02.07.12
after this i m flash abbyss kernal
after this my phone did not start and go to in recovery mode
but i m trying to flash using pc odin its stop on factoryfs
help me to recover plzzzzzzz
Does Download mode work?
If so, Download GB firmware for ODIN and flash it.
I believe you flashed the wrong kernel.

[Q] Galaxy mini s5570i stck at logo screen

Hi,
I was trying to flash my phone so i downloaded clockwork mode file, put it on my SD and isntall it through recovery mode. The thing is i forgot to root before flashing so now, my phone is stuck at logo screen. i can get to recovery system but i get failed to mount /system (invalid argument) and i get get to downloading mode, but odin 4.42 which all sites recommends cant recognize the phone. only odin 1.83 can detect but i cant find files for it. Please advice
hangman_101 said:
Hi,
I was trying to flash my phone so i downloaded clockwork mode file, put it on my SD and isntall it through recovery mode. The thing is i forgot to root before flashing so now, my phone is stuck at logo screen. i can get to recovery system but i get failed to mount /system (invalid argument) and i get get to downloading mode, but odin 4.42 which all sites recommends cant recognize the phone. only odin 1.83 can detect but i cant find files for it. Please advice
Click to expand...
Click to collapse
When you downloaded the clockwork mode recovery file you should have flashed via Odin v4.38 and not trough stock recovery cos that might end up soft/hard brick your phone try to follow the tutorial from af(android forums) on how to unbrick your phone it might help
Mihail_Russian said:
When you downloaded the clockwork mode recovery file you should have flashed via Odin v4.38 and not trough stock recovery cos that might end up soft/hard brick your phone try to follow the tutorial from af(android forums) on how to unbrick your phone it might help
Click to expand...
Click to collapse
i also get stucked on the bootlogo when I flash cwm through recovery mode. Anyone got solution for this? I keep stuck at bootlogo now.
-SOONZAI- said:
i also get stucked on the bootlogo when I flash cwm through recovery mode. Anyone got solution for this? I keep stuck at bootlogo now.
Click to expand...
Click to collapse
Try to follow that tutorial that i've been talking about the one on (andorid forums) (it help'd me allot)although i'm not quite sure that it will help you very much cos that tutorial is for SGM s5570 but try it if it help's i would recommend before flashing clock work mod for your device (via Odin) not trough stock recovery,cos mine got stuck at boot logo the same as you i try'ed to flash cwm trough stock recovery and my device bootloop'ed so try to update your phone with latest version of gingerbread and then start to flash cwm on your device if the unbrick tutorial from af help's

[Q] help..no firmwar..cwm recovery presen..download mode present.. odin not detectin

Help
I have this sgs i9000 and it had bootloop error when I recieved it from a friend. I tried a few things with odin like flashing stock rom but dint work. Unfortunately it hasnt got any firmware in it now. It has cwm recovery and download mode works but odin is not detecting phone when I connect it..no blue light...
So... I am stuck...please help..
Don't panic, mate. Check this thread and read carefully, you may find all the answers there:
http://forum.xda-developers.com/showthread.php?t=2444308

I9000 Wont boot no service mode is it bricked?

I9000 Wont boot no service mode is it bricked?
hello i was trying to update the the stock recovery service boot options on my gt I9000 so i could upgrade to CyanogenMod 10.2 Android 4.3 Jelly Bean.
but i kept getting "E signature failed" in the service boot options, so i tryed to update the service mode screen and so it
would get rid of the "E signature error" with odin.
i opened an update rar file instead of a tar (should have noticed) and ran odin it failed and now i cant,
get my gt I9000 to boot into service mode or start up.
when i do try to start phone the up i just get an picture of a *Phone ! Pc*
http://dl-1.va.us.xda-developers.com/thumbs/2/3/6/7/6/6/4/2367664.jpg
i can only access download mode volume down+home+power key
i tryed to install and run "Heimdall version 1.3.1 from the guide in the thread (link below)
http://forum.xda-developers.com/showthread.php?t=1886393
but it wont install i just get MSCVR100.DLL Errors i reinstalled vcredist_x86.exe
and tryed to register the dll from cmd but it didn't work.
Im just looking through this thread on bricked the I9000 (link below)
http://forum.xda-developers.com/showthread.php?t=2434225
And trying the steps in that post.
i did backup using titanium and saved the entire contents of my phone to my pc can i restore my phone from that, via the Pc?
is there a way to replace the boot loaders on the phone with odin or another program?
it was Froyo 2.0 JPO
can anyone advise me what i can do please?
Update
Hi just a quick update
i reinstalled windows 7 on a old harddrive and managed to install heimdall & oneclick unbrick installed on that
in the cmd box it says
Error: Null
Set Temporary Folder:C:\Users\xai\AppData\Local\Temp\\xaiHeimdallOneClick\
Log:C:\Users\xai\AppData\Local\Temp\\xaiHeimdallOneClick\log.txt
Operating System: Windows
Found Heimdall Version: Heimdall v1.0.2b
Is the Null Error a problem?
the oneclick unbrick window says
Set Temporary Folder:C:\Users\xai\AppData\Local\Temp\\xaiHeimdallOneClick\
Log:C:\Users\xai\AppData\Local\Temp\\xaiHeimdallOneClick\log.txt
Operating System: Windows
Found Heimdall Version: Heimdall v1.0.2b
Ive installed the samsung drivers Pc installed compensate device and mass storage or something.
Im on an old pc with crap internet connection which keeps disconnecting every few mins, and it makes trying to view threads very difficult, am trying to find some threads i was looking in at the time of posting my op
is it safe to go ahead with the unbricking?
some advice at this point would be greatly appreciated
Thank's :
Futher Update
So i took the plunge an Clicked Unbrick, it then said it needed to install drivers, i followed the steps it then gave me and i clicked show all devices then my device was found, it installed the zadig drivers etc and then configured it all by its self and restarted my phone
All is good and well again
At this point ide like to thank the members whos contributions/guides on the forum helped me get things back on track and a big shout out to the heimdall/oneclick unbrick developers :good:
You all have done/do some great work
Thanks Again folks!!! :good:
Yours Sincerly Xai
Downgrade E3 To E2 Recovery
hello again
I'm trying to downgrade recovery mode from E3 To E2, ive searched and read a few of the threads but I'm still unsure what do to
I've got a...
GT I9000 (international sim free)
Firmware
2.2
Baseband
I9000xxjpp
Kernal Version
2.6.32.9
Build Number
Froyo.xxjpo
I was gonna open CF-Root-XX_XEU_JPO-v1.2-busybox-1.17.1 in odin and hit PDA.
theres a few conflicting guides on how and what to do and a few of the guide take me to links that want to install stuff on my pc etc which i dont trust.
some links say it will work as i decribed there others say you need a stock recovery file or an e2 recovery file for the Froyo.
im lost with how to proceed, can anyone help or link me to the files i need please?
Thank's Xai
E2 is totally outdated thing, why would you need that?
What is your point, what do you desire to install?
tetakpatalked from Nexus 7 flo
tetakpatak said:
E2 is totally outdated thing, why would you need that?
What is your point, what do you desire to install?
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
Hello Tetakpataki hope your good & thank's for your reply :good:
i was trying to apply the lag fix but it wouldn't install cos i was in recovery E3 and kept geting the "E Signature" failed error
Ive since flashed my phone with "speedmod-kernel-k13c-500hz.tar" and can now access E2 recovery but I'm now stuck in clockworkmod recovery v2.5.1.0 speedMod ULFK.
When i flashed it it auto check repartition i didn't notice till it was too late.
Every time i try to start the phone it goes to "clockworkmod recovery v2.5.1.0 speedMod ULFK" screen and i cant get out it, i can still get into download mode, but the phone wont boot up normaly
Ive flashed with bootloader "i9000 boot.tar.md5" but that didn't work i change the extension to "i9000 boot.tar" it flashed but i still goto recovery.
Ive read through a lot of threads and guides a lot of the links to files i apparently need are down
I'm at a total loss as what i can do now? i cant find the froyo stock rom or the bootloader either (international version) can someone help me out please?
My phone is
GT I9000 (international sim free)
Firmware
2.2
Baseband
I9000xxjpp
Kernal Version
2.6.32.9
Build Number
Froyo.xxjpo
I hope that makes thing easyer
Any help would be greatly appreciated thank's
Can you reach the download mode?
tetakpatalked from P5110
tetakpatak said:
Can you reach the download mode?
tetakpatalked from P5110
Click to expand...
Click to collapse
Hiya Tetakpatak :good:
yes i can get into download mode
im just having a look at Xsenman's "[Toolkit][A.I.O Rescue & Recovery] My Android Collection" thread (link below) and seeing if i can do anything suggested there
http://forum.xda-developers.com/showthread.php?p=29331775#post29331775
I'm gonna try "Make CWM Recovery .img's into .tar.md5 odin flash-able files 1 CLICK " and see if that works
also ive gotta try mount the sd cards internal & external so im having a look at that too
I'l let you know what happens any other advice would be great thanks
xai25 said:
I'm gonna try "Make CWM Recovery .img's into .tar.md5 odin flash-able files 1 CLICK " and see if that works
http://forum.xda-developers.com/showthread.php?t=2281287
Click to expand...
Click to collapse
I tryed that edited the bat renamed the file to recovery.img it didn't work and is a lot of hastle messing around editing any futher tbh
I went here
http://forum.xda-developers.com/showpost.php?p=14013450&postcount=1
tryed to download the "EZboot-Froyo-1.0.tar.md5 - Froyo" file but the links dead and i cant post in the thread.
cant i get file or a kernal and just flash it with odin then get back to normal no?
I finally got it fixed
Hello
I finally found a copy of the I9000XXJPO firmware (the other night) and flashed my phone with it.
the phone was getting stuck on the S slash screen.
But to fix that i flashed it with I9000 dbdata.rfs file (as i had a few E fail errors showing in recovery mode too) and it booted up fine after that.
I'm all up and running again
A Huge Thank's...
To All The Folk & developers, who spend a lot of time on the software, & contributed the guides and files to the forum
Great Work!! :good:
Your's Sincerely
Xai

Categories

Resources