Related
I was going through the below tutorial everything seem to go find until i restarted. Then it froze and has been frozen for a while im trying to wait an hour its been about 20 minutes.
Any thoughts ideas on where to start to get my device rolling or is it done for. thanks for any device you can provide.
the unlockr .com/
2010/11/29/how-to-flash-a-custom-recovery-image-on-the-samsung-galaxy-tab]
did you use CWM from Rom Manager?
This is NOT optimized for the SGT.. nor is it encouraged.
Anyhow, have you tried to check if your computer can detect your tab, through Kies or Odin?
Sef_P1000 said:
did you use CWM from Rom Manager?
This is NOT optimized for the SGT.. nor is it encouraged.
Anyhow, have you tried to check if your computer can detect your tab, through Kies or Odin?
Click to expand...
Click to collapse
Yes I did use CWM from Rom Manager
Kies says connecting but doesn't ever connect
Odin3 says 0:[COM6]
so what can I do?
what you can do , is go grab the stock gingerbread and flash it via odin and then take the root file and u'll have both gingerbread and also the cwm ...
follow chainfire steps and u'll do it in 4mins
k0sh said:
what you can do , is go grab the stock gingerbread and flash it via odin and then take the root file and u'll have both gingerbread and also the cwm ...
follow chainfire steps and u'll do it in 4mins
Click to expand...
Click to collapse
t
What do you mean do you have instructions somewhere? please post thanks for your help
iamahero said:
t
What do you mean do you have instructions somewhere? please post thanks for your help
Click to expand...
Click to collapse
he was pertaining to this thread..
http://forum.xda-developers.com/showthread.php?t=1073854
noxxious said:
he was pertaining to this thread..
http://forum.xda-developers.com/showthread.php?t=1073854
Click to expand...
Click to collapse
You the dude
Sent From (I'm In Luv With My Tab)
similar problem....also stuck on boot
but I got there a different way. (FIXED)
Let me start off by saying I am stupid I have a tmobile tab and it was running awesome on overcome 2.0.0 rc1 with ext4 conversion and OC kernel and then I saw the honeycomb alpha had been released for cdma, which of course I dont have (gsm), and decided to try the rom with the oc gsm kernel, which didnt work.
then I dun goofed. Instead of going back to overcome in cwm, I flashed the damn experimental honeycomb package again, kernel and all and then loaded the tab.....dumb...weird colors and then nothing....screen just goes black and no matter what I cannot see cwm screen. And now odin no longer recognizes the tab.
heimdall works and I flashed back kernal from :[OC/UV][7th Jun][Kernel] koxudaxi kernel [GSM][2.2&2.3][KernelPatch]
which gives me cwm, but it keeps giving me an error that i cant mount sd card
I have tried flashing the safe gingerbread stock with pit file (still stuck on boot logo)
then tried flashing rotostock tmobile rom ( but no pit file and when it boots it still shows the gingerbread bootlogo)....do i flash with P1_add_hidden.pit added?
Any and all help will be much appreciated. please don't be too mean. I know i shouldn't have done what i did
[UPDATE]
So I figured it out. I reinstalled samsung usb driver from within odin folder, and odin suddenly started working. went back to stock GB and then on to Overcome 2.0.0 Gold w/ ext4 and oc'd to 1.4
I had to reinstall the hiemdall driver too after reinstalling samsung driver, but now they both work again....... so stoked
Hi
I'm looking for root & cwm for this device. specially cwm recovery or another kernal/recovery that can install zip files.
there is something like that?
thanks a lot.
avicohh said:
Hi
I'm looking for root & cwm for this device. specially cwm recovery or another kernal/recovery that can install zip files.
there is something like that?
thanks a lot.
Click to expand...
Click to collapse
someone managed to do the root?
nixonik said:
someone managed to do the root?
Click to expand...
Click to collapse
managed some soft bricks in how not to root. Odin up & waiting if a dev comes up with it
I am also waiting for the root!
not sure if it would work, but im working on a rom right now that is pre-rooted, but like i said i dont think that it will work,, i hope someone makes a cwm recovery soon
I'm currently trying to create a prerooted rom the way I did it for my tablet.
Extracting the system image from the Update package was easy, currently I'm trying to mount the syste,.img to set the rights and add the SU binaries.
If this works out, how can I flash this ROM?
With KIES? Or Update.zip on SD?
Is there an Update mode, and how can I get there?
edit: Okay... I was able to mount the System.img, but this is not that straight forward as in the img of my tablet.
I found a lot of folders, but no .apk, known folder or something I could work with.
softbricked
gummygum said:
managed some soft bricks in how not to root. Odin up & waiting if a dev comes up with it
Click to expand...
Click to collapse
Have you tried adb shell?. I am not allowed to post outside links, but if you type "londatiga net/it/how-to-use-android-adb-command-line-tool/" in Google, you will get the appropiate link
Could you explain with some derail how did you unbricked the phone?
Thanks a lot
teddybt said:
I'm currently trying to create a prerooted rom the way I did it for my tablet.
Extracting the system image from the Update package was easy, currently I'm trying to mount the syste,.img to set the rights and add the SU binaries.
If this works out, how can I flash this ROM?
With KIES? Or Update.zip on SD?
Is there an Update mode, and how can I get there?
edit: Okay... I was able to mount the System.img, but this is not that straight forward as in the img of my tablet.
I found a lot of folders, but no .apk, known folder or something I could work with.
Click to expand...
Click to collapse
ou should of just setup android kitchen and put the boot.img and system.img in there and it extracts them, plus you can pre-root it aswell
I have posted here for help!
Hi guys, I'm pretty new here.
I was wondering if there is any official 4.1.1 Jellybean for SIII Mini, 'cause my phone is pretty dead at this moment. I tried to download from official servers some packages , and use them with Odin ...but the phone is still at the main screen " Samsung Galaxy S III Mini GT-I8190 ". Any ideas how to manage with this ?
Or can I use another firmware, as 2.3.4 Gingerbread?To downgrade the device just to work?
zeek12 said:
Hi guys, I'm pretty new here.
I was wondering if there is any official 4.1.1 Jellybean for SIII Mini, 'cause my phone is pretty dead at this moment. I tried to download from official servers some packages , and use them with Odin ...but the phone is still at the main screen " Samsung Galaxy S III Mini GT-I8190 ". Any ideas how to manage with this ?
Or can I use another firmware, as 2.3.4 Gingerbread?To downgrade the device just to work?
Click to expand...
Click to collapse
Do you tried to get some of this firmwares:
samsung-updates.com/device/?id=GT-I8190
and installing with:
trickytweaks.com/i8190xxaljl-4-1-1-jelly-bean-update-gt-i8190-s3-mini-how-to.htm
Yes, I have tried with my provider's firmware , but nothing happened. Still at logo screen. I have also tried with other firmwares, but still at a dead end. Right at this moment I'm flashing my phone again, hoping that something will change.
Had it stuck by flashing custom boot.img. Solved it by flashing 1 file image from samfirmwares as pda in Odin 1.85 default settings
Sent from my GT-I8190 using xda app-developers app
I have succesfully extracted the PIT file from my S3 mini with the Heimdall software, but I don't wanna use it to flash with Odin because I think it's pretty messed up. Can anyone provide me with their Galaxy S3 Mini PIT file, hoping to rescue my dead phone ?
no boot into recovery mode and wipe data/cache that should get the phone booting again, esppecially after flashing firmwares with odin
winxuser said:
no boot into recovery mode and wipe data/cache that should get the phone booting again, esppecially after flashing firmwares with odin
Click to expand...
Click to collapse
Well, if the recovery mode can be accessed with Volume Up + Home + Power, then I can say that my S III Mini won't get into it.If I press these buttons the phone just gets on, and remains at Samsung Logo. So that is why I'm asking for a PIT file, 'cause I can't get into recovery mode to erase all data, so I can flash my phone again using Odin.
I have tried all official firmwares and still nothing. I guess my SIII Mini partitions are a little (or a little more) messed up, and I need to use Re-Partition from Odin so I can revive my phone.And to do this I need a PIT file from a working phone.
Or there is another way to get into recovery mode, excepting Volump Up + Home + Power?
Thanks for the answers.
elco27 said:
There is a solution for hte problem you have with that phone.
Check this thread for more info: h t t p://forum.gsmhosting.com/vbb/f286/i8190-galaxy-s3-mini-hang-startup-solution-1574562/#post8970902
Click to expand...
Click to collapse
Well, the NsPro tool requiers a box, that costs 170$. The program is useless without that box. I have downloaded it and doesn't work without that box.Another solution is by using a JTAG box, which does the pretty same thing, but again, it is expensive.
I was thinking that if I'll repartion my phone it will resolve the boot.img file, because it's in the "softbrick" at this moment.
helpline
Have you tried emailing or phone SAMSUNG`s helpline, they might help.
Write this image file whit odin 1.85 and voala you phone revive.
Pls use tanks buton
That param.tar file I saw it is for S II . Does it work for a S III mini too? Aren't 2 different devices?
Hello,
I've a "non commercial" version of a GTab 8.9.
This tab is running by default Android 3.1. I would like to update to Android 4.0.4. Kies doesn't want indicating my tablet doesn't support the update (i don't know it was 4.0.4 version or another)
I tried to use the standard : Odin + the new firmware. The tablet is unlocked and rooted.
Each time that I tried I get the error : "can't nand write" :-/ I tried all current stuff to fix this issue : change cable, PC, odin version (1.83, 1.85, 3.07, 3.09). I tried to change recovery with succss
but impossible to change rom. I found a link on tsar dot com (sorry I'm too young here to post link) to reformat tab and I put the pit file : this has worked....but now : i can't access to the recovery. I can only open the download mode...but I can't do anything and I don't have others files described ont the following link
XDA's guy are ones to save me !!
thanks by advance (sorry for my poor english)
arnouf said:
Hello,
I've a "non commercial" version of a GTab 8.9.
This tab is running by default Android 3.1. I would like to update to Android 4.0.4. Kies doesn't want indicating my tablet doesn't support the update (i don't know it was 4.0.4 version or another)
I tried to use the standard : Odin + the new firmware. The tablet is unlocked and rooted.
Each time that I tried I get the error : "can't nand write" :-/ I tried all current stuff to fix this issue : change cable, PC, odin version (1.83, 1.85, 3.07, 3.09). I tried to change recovery with succss
but impossible to change rom. I found a link on tsar dot com (sorry I'm too young here to post link) to reformat tab and I put the pit file : this has worked....but now : i can't access to the recovery. I can only open the download mode...but I can't do anything and I don't have others files described ont the following link
XDA's guy are ones to save me !!
thanks by advance (sorry for my poor english)
Click to expand...
Click to collapse
I didn't quite understand everything, but I'll provide you every link you need to fix this
and if I forgot something or you need anything, feel free to ask for
now here are links for some absolutely working files:
Samsung USB Driver For GT-P7300/GT-P7310 v1.5.5.0
Odin3 v1.85 For GT-P7300/GT-P7310
Samsung latest official GT-P7300 framework Tar for Odin
Samsung latest official GT-P7310 framework Tar for Odin
Samsung latest official GT-P7320 framework Tar for Odin
ClockworkMod Recovery v5.5.0.4 Odin Tar File For GT-P7300/GT-P7310
Team Win Recovery Project v2630 Odin Tar File For GT-P7300 & GT-P7310
all you have to do is to flash your tab's ROM [chose the link in regard of your tab's model number (p7300,p7310,p7320)]
and then flash your prefered recovery
omarainea said:
I didn't quite understand everything, but I'll provide you every link you need to fix this
and if I forgot something or you need anything, feel free to ask for
now here are links for some absolutely working files:
Samsung USB Driver For GT-P7300/GT-P7310 v1.5.5.0
Odin3 v1.85 For GT-P7300/GT-P7310
Samsung latest official GT-P7300 framework Tar for Odin
Samsung latest official GT-P7310 framework Tar for Odin
Samsung latest official GT-P7320 framework Tar for Odin
ClockworkMod Recovery v5.5.0.4 Odin Tar File For GT-P7300/GT-P7310
Team Win Recovery Project v2630 Odin Tar File For GT-P7300 & GT-P7310
all you have to do is to flash your tab's ROM [chose the link in regard of your tab's model number (p7300,p7310,p7320)]
and then flash your prefered recovery
Click to expand...
Click to collapse
Thanks for your reply. I tried this first but it didn't work because when I want "start" with the good firmware (7300), the md5 check works but that's all. When odin want write boot.img or other file, i get an error "Can't write" and odin stops.
As this method didn't work I try with the tsar dot com solution. Hoping that's can help me.
Thanks a lot.
arnouf said:
Thanks for your reply. I tried this first but it didn't work because when I want "start" with the good firmware (7300), the md5 check works but that's all. When odin want write boot.img or other file, i get an error "Can't write" and odin stops.
As this method didn't work I try with the tsar dot com solution. Hoping that's can help me.
Thanks a lot.
Click to expand...
Click to collapse
ok if this is the same file you tried, you should try to flash another one Previous official framework for P7300
omarainea said:
ok if this is the same file you tried, you should try to flash another one Previous official framework for P7300
Click to expand...
Click to collapse
Ok I'm going to try. But I think it's going to fail.... the reason is the Nand seems block or something like that.
I download file, test and I'll give you a feed back. Thanls for your help.
arnouf said:
Ok I'm going to try. But I think it's going to fail.... the reason is the Nand seems block or something like that.
I download file, test and I'll give you a feed back. Thanls for your help.
Click to expand...
Click to collapse
Or your nand is really broken
I've a similar issue in /data partition (it can't be writtable after a try to flash with Odin from a virtual machine) and I fixed it with the PIT file to repartition, reflash stock firmware and then a wipe/factory reset from stock recovery (I think it did a format)...
I try to put pit file. It's works as I told in my first post. But I can't flash the firmware with a standard stock rom (apparently). Can you tell me tools and roms that you used to fix the issue exaclty ?
arnouf said:
I try to put pit file. It's works as I told in my first post. But I can't flash the firmware with a standard stock rom (apparently). Can you tell me tools and roms that you used to fix the issue exaclty ?
Click to expand...
Click to collapse
I think the same as @omarainea have posted...
jolinnard said:
I think the same as @omarainea have posted...
Click to expand...
Click to collapse
Poor guy I am ! After a pit file download with heimdall...My tab doesn't start, screen is still off, and I don't have information in charge....brick, brick, brick...
arnouf said:
Poor guy I am ! After a pit file download with heimdall...My tab doesn't start, screen is still off, and I don't have information in charge....brick, brick, brick...
Click to expand...
Click to collapse
what did you do to break your device ??
omarainea said:
what did you do to break your device ??
Click to expand...
Click to collapse
I think that I use incorrectly the heimdall sofware when I want to load the pit file. Messages said all was ok, I unplug the USB cable. I would like to reboot the tab and...black screen, impossible to restart....complete black screen
arnouf said:
I think that I use incorrectly the heimdall sofware when I want to load the pit file. Messages said all was ok, I unplug the USB cable. I would like to reboot the tab and...black screen, impossible to restart....complete black screen
Click to expand...
Click to collapse
I'm not familiar with heimdall tool but I know that it should be used with Galaxy S devices:
What is Heimdall?
Heimdall is a cross-platform open-source tool suite used to flash ROMs onto Samsung Galaxy S devices.
Click to expand...
Click to collapse
anyway, so now you can't enter download mode or recovery ??
if that so, then you have officially break your device:silly:
and the most recommended solution is to take your tab to a near Samsung store
and they'll fix it for you
omarainea said:
I'm not familiar with heimdall tool but I know that it should be used with Galaxy S devices:
anyway, so now you can't enter download mode or recovery ??
if that so, then you have officially break your device:silly:
and the most recommended solution is to take your tab to a near Samsung store
and they'll fix it for you
Click to expand...
Click to collapse
Apparently some guys use heimdall with P7300...
Yes the tab is really broken now !
Thanks for helps given by each guy here ! Thanks a lot.
arnouf said:
Apparently some guys use heimdall with P7300...
Yes the tab is really broken now !
Thanks for helps given by each guy here ! Thanks a lot.
Click to expand...
Click to collapse
What I remember is Heimdall doesn't work with my P7310 and it don't let me do anything.
Anyway, plug into a Windows machine running Odin 1.85 (I think this version it's fine) your tab, press 10 seconds UP and power button and see if your tab is detected. In that case try to flash stock package again.
Some time ago it happened to me with a Galaxy Ace phone, when phone is booting screen was off but the phone enters into download mode anyway and you could flash whatever you want.
A last shot for you could be disassemble your tab and pull off battery. Wait some minutes and then pull on again. Try to start in download mode with tab plugged into your computer. If you don't have enough knowledge to disassemble your tab (and I can assure you of that it's not easy) maybe you need to bring it to Samsung support.
jolinnard said:
What I remember is Heimdall doesn't work with my P7310 and it don't let me do anything.
Anyway, plug into a Windows machine running Odin 1.85 (I think this version it's fine) your tab, press 10 seconds UP and power button and see if your tab is detected. In that case try to flash stock package again.
Some time ago it happened to me with a Galaxy Ace phone, when phone is booting screen was off but the phone enters into download mode anyway and you could flash whatever you want.
A last shot for you could be disassemble your tab and pull off battery. Wait some minutes and then pull on again. Try to start in download mode with tab plugged into your computer. If you don't have enough knowledge to disassemble your tab (and I can assure you of that it's not easy) maybe you need to bring it to Samsung support.
Click to expand...
Click to collapse
Heimdall works for our tablets. I use it for P7300, for example.
DemonGloom said:
Heimdall works for our tablets. I use it for P7300, for example.
Click to expand...
Click to collapse
Ok, so I don't know what could happen when I tried it, I think last time was in 2012 or maybe early 2013...
I tried upgrading my international N7000 to CM10.3 following the instructions in
http://wiki.cyanogenmod.org/w/Install_CM_for_n7000
but now the phone won't even boot into the recovery, all it shows is
Samsung
GALAXY Note
GT-N7000
/ \
/ | \
/--*-\
When i tried flashin from my Mac iusing Heimdall,
the download finished on the mac, but on the N7000
it still showed the blue line etc. I waited a lng time and tried
rebooting, but got the above.
Re-flashing in Heimdall had no effect.
I then tried flashing
hardcore-speedmod-ics-recovery-n7000.tar
using Odin 3.185 from my VMwars Fusion XP install,
and that seemed to finish ok, but no luck either.
I looked for the latest CWM 6.0.4.3 recovery, but I cannot find any
odin-flashable format for it, and of course I cannot use the sdcard
as I cannot even boot into any recovery as is.
Can anyone suggest next steps?
sejtam said:
I tried upgrading my international N7000 to CM10.3 following the instructions in
http://wiki.cyanogenmod.org/w/Install_CM_for_n7000
but now the phone won't even boot into the recovery, all it shows is
Samsung
GALAXY Note
GT-N7000
/ \
/ | \
/--*-\
When i tried flashin from my Mac iusing Heimdall,
the download finished on the mac, but on the N7000
it still showed the blue line etc. I waited a lng time and tried
rebooting, but got the above.
Re-flashing in Heimdall had no effect.
I then tried flashing
hardcore-speedmod-ics-recovery-n7000.tar
using Odin 3.185 from my VMwars Fusion XP install,
and that seemed to finish ok, but no luck either.
I looked for the latest CWM 6.0.4.3 recovery, but I cannot find any
odin-flashable format for it, and of course I cannot use the sdcard
as I cannot even boot into any recovery as is.
Can anyone suggest next steps?
Click to expand...
Click to collapse
1st things 1st. Why would u use heimdall or odin? And what is your current ROM before trying to flash CM 10.3, was it stock? You should have looked for CWM recovery or Philz safe kernels as base when doing ROM flashing ESPECIALLY custom roms. From what you said, then can you still boot into download mode? I have no knowledge of heimdall so just download Stock Firmware, flash it with odin and see if you can boot your N7000 first.
The worst case scenarios is you are experiencing emmc bug-brick. go to the thread and read carefully to deduce your type of 'brick' and find solutions there. Good Luck.
I was on a stock 4.0.4 (but rooted). I originally tried flashing the cwm from the sd card, but after starting to load it it also just hung,
so I looked for an alternative..
I found a post on stockroms (http://forum.xda-developers.com/showthread.php?t=1424997) but the links all point to hotfile.com. which my browser says it cannot find. is hotfile dead? Is there an alternative?
sejtam said:
I was on a stock 4.0.4 (but rooted). I originally tried flashing the cwm from the sd card, but after starting to load it it also just hung,
so I looked for an alternative..
I found a post on stockroms (http://forum.xda-developers.com/showthread.php?t=1424997) but the links all point to hotfile.com. which my browser says it cannot find. is hotfile dead? Is there an alternative?
Click to expand...
Click to collapse
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
same problem
Jackwu696 said:
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
i have the same problem , only mine loads into the recovery menu , ive tried finding a working odin to nstall it back to factory.
when i had this problem last night , i wasnt sure what i done but i managed to install a custom rom and that worked but now i seem to be getting status 7 error ,
my computer wont recognise my phone so i cant do anything that way . any ideas or links to solutions will be appreciated
i have the same problem
conanbrapp said:
i have the same problem , only mine loads into the recovery menu , ive tried finding a working odin to nstall it back to factory.
when i had this problem last night , i wasnt sure what i done but i managed to install a custom rom and that worked but now i seem to be getting status 7 error ,
my computer wont recognise my phone so i cant do anything that way . any ideas or links to solutions will be appreciated
Click to expand...
Click to collapse
I'm sorry so did u succeed or did you not succeed in installing the custom rom? If your custom rom boots fine then all u need is to search for solving status 7 error thread. My advice to all noobs is to always try n avoid installimg anything except stock rom in odin. Always read and re read before flashing anything that's beyond your knowledge. Basic knowledge of flashing cusroms is :
1. ALWAYS make sure you're on SAFE and COMPATIBLE KERNEL. Most rom threads ALWAYS Include threads/links to a specific recovery/kernel to use. Read n RE READ that.
2. Wipe everything IN RECOVERY mode before flashing a rom.
Sent from my GT-N7000 using XDA Free mobile app
fixed miine
Jackwu696 said:
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
Jackwu696 said:
I'm sorry so did u succeed or did you not succeed in installing the custom rom? If your custom rom boots fine then all u need is to search for solving status 7 error thread. My advice to all noobs is to always try n avoid installimg anything except stock rom in odin. Always read and re read before flashing anything that's beyond your knowledge. Basic knowledge of flashing cusroms is :
1. ALWAYS make sure you're on SAFE and COMPATIBLE KERNEL. Most rom threads ALWAYS Include threads/links to a specific recovery/kernel to use. Read n RE READ that.
2. Wipe everything IN RECOVERY mode before flashing a rom.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
im not Sure what i did , i unbricked (soft) and successfully installed kitkat not sure exactly how but it worked.... still have root too ... had and error about needing to wipe data for suib i think but thats the only fallback i fell into
conanbrapp said:
im not Sure what i did , i unbricked (soft) and successfully installed kitkat not sure exactly how but it worked.... still have root too ... had and error about needing to wipe data for suib i think but thats the only fallback i fell into
Click to expand...
Click to collapse
If you're able to boot up properly n prompted to wipe, then do it. But do it in recovery not on device.
Ok, I downloaded one of the stock kernels for my internatinal N7000, but flashing that with Odin 3.185 hangs about 3/4 through (has now been
sitting there for >60 mins).
Looks like I am screwed?
The file I found is KIES_HOME_N7000XXLT4_N7000OXALT4_1103517_REV02_user_low_ship.tar.md5
I f I wanted to try flashing this with Heimdall, I'd need to know partition numbers I think
Where can I get those?
Or should I get another file?
sejtam said:
Ok, I downloaded one of the stock kernels for my internatinal N7000, but flashing that with Odin 3.185 hangs about 3/4 through (has now been
sitting there for >60 mins).
Looks like I am screwed?
The file I found is KIES_HOME_N7000XXLT4_N7000OXALT4_1103517_REV02_user_low_ship.tar.md5
I f I wanted to try flashing this with Heimdall, I'd need to know partition numbers I think
Where can I get those?
Or should I get another file?
Click to expand...
Click to collapse
Before that, do u have KIES installed? KIES is NOT compatible with odin and will cause potential trouble. So is some firewall and antivirus apps. You need to disable all of them before using odin. Please search the thread http://www.sammobile.com/firmwares/ for stock rom site.
Sent from my GT-N7000 using XDA Free mobile app
Ok. I downloaded two stock roms from sammobile:
[email protected] 1 mathias staff 808649674 May 9 10:53 N7000XXLT5_N7000MBCLT1_MBC.zip
[email protected] 1 mathias staff 750466356 May 9 10:50 N7000XXLRL_N7000OXELR5_MBC.zip
but both fail with some (unreadable, apparently character set issue) error under ODIN.
I found this:
http://droidangel.blogspot.sg/2012/01/samsung-galaxy-note-gt-n7000-all.html
which shows how to do a full flash , including PIT file, but the links again go to hotfile which seems to be down.
http://hotfile.com/dl/140099962/b9e0d63/Q1-20110914_16GB.pit.rar.html
Where can I get a) separate
CODE_N7000xxxxx_CLxxxxxxx_REVxx_user_low_ship.tar.md5
MODEM_N7000xxxxxx_REV_00_CLxxxxxx.tar.md5
GT-N7000-CSC-MULTI-xxxxxx.tar.md5
and the PIT file?
sejtam said:
Ok. I downloaded two stock roms from sammobile:
[email protected] 1 mathias staff 808649674 May 9 10:53 N7000XXLT5_N7000MBCLT1_MBC.zip
[email protected] 1 mathias staff 750466356 May 9 10:50 N7000XXLRL_N7000OXELR5_MBC.zip
but both fail with some (unreadable, apparently character set issue) error under ODIN.
I found this:
http://droidangel.blogspot.sg/2012/01/samsung-galaxy-note-gt-n7000-all.html
which shows how to do a full flash , including PIT file, but the links again go to hotfile which seems to be down.
http://hotfile.com/dl/140099962/b9e0d63/Q1-20110914_16GB.pit.rar.html
Where can I get a) separate
CODE_N7000xxxxx_CLxxxxxxx_REVxx_user_low_ship.tar.md5
MODEM_N7000xxxxxx_REV_00_CLxxxxxx.tar.md5
GT-N7000-CSC-MULTI-xxxxxx.tar.md5
and the PIT file?
Click to expand...
Click to collapse
Of course you fail... When using ODIN, U should have downloaded the .tar. if you downloaded a zip. then unzip it first to get the tar file, then you flash it with odin. All requests are included in the stock.tar And PLEASE DO NOT Play with PIT files if you don't know what you are doing.
So now what you need to do is. :
1. DISABLE KIES (Uninstall it better), Your firewall, antivirus.
2. Install CORRECT Samsung USB driver. (Search keyword "download samsung N7000 usb drivers")
3. Unzip your zip file and extract the tar.file.
4. Run ODIN as Administrator (Right click/run as)
5. Go to download mode. connect your device to Pc/laptop.
6. Wait until Odin detects your device, click AP/PDA and choose the tar file you extracted.
7. DO NOT tick partition.
8. Let it run
Of course I unzipped the zip to get a SINGLE .tar.md5, but flashing that fails on factoryfs about 3/4 through. consistently.
sejtam said:
Of course I unzipped the zip to get a SINGLE .tar.md5, but flashing that fails on factoryfs about 3/4 through. consistently.
Click to expand...
Click to collapse
Try updating your odin. Use the newest vers. And try and read this https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNGd2e3iG5hkDeo0KyAjGuCSfQSLUw . If All fails then it's a confirmed SUPER-BRICK and there's nothing except samsung service centre can help you now... Sorry for not being able to help more..
Thanks. That led me to
http://forum.xda-developers.com/showthread.php?t=1656635
where I found the PIT file, but for ROMs pointed to http://forum.xda-developers.com/showthread.php?t=1530501
which again points to hotfile and fileserve.com , which (besides being under maintenance) says
FileServe can only be used to download and retrieve files that you have uploaded personally.
which makes it useless for finding ROMs...
sejtam said:
Thanks. That led me to
http://forum.xda-developers.com/showthread.php?t=1656635
where I found the PIT file, but for ROMs pointed to http://forum.xda-developers.com/showthread.php?t=1530501
which again points to hotfile and fileserve.com , which (besides being under maintenance) says
FileServe can only be used to download and retrieve files that you have uploaded personally.
which makes it useless for finding ROMs...
Click to expand...
Click to collapse
His link to ROMS were basically the same ones you can download at sammobile.
I've a i9000 and i9300 which I don't really use so I thought I'd do some updating.
A while back I put CM11 on the i9000, and put it on the i9300 yesterday, then I thought I'd root them, that's when the problems started!
Booted into download mode and used Odin to put the firmware on, it reports successful but the phone doesn't boot past the first screen.
I used the CF-Root file -XX_OXA_JVT-v4.3-CWM3RFS.tar but I've also tried JVR, JVS, JVU, JVZ and JW4 out of desperation....with the same results.
I'm glad I started with the i9000, and I'd like to try to recover it, but I'm at a loss now :crying:
That CF kernel is for stock JVT. Hopefully you didn't try it for CM11?
It would last to flash a full firmware, reboot once, and after that you can flash compatible custom kernel (same image contains also custom recovery).
We have quite good sticky threads in this section that can guide you. Which Odin version did you use? 1.83 and 1.82 are the last ones with full compactibility for the i9000.
tetakpatalked from Nexus 7 flo
tetakpatak said:
That CF kernel is for JVT. We have quite good sticky threads in this section that can guide you. Which Odin version did you use? 1.83 and 1.82 are the last ones with full compactibility for the i9000.
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
Ah! I was using V3! And yes I tried it with CM11!
I found this post and have got it back, now to try again!!
eusty said:
Ah! I was using V3! And yes I tried it with CM11!
I found this post and have got it back, now to try again!!
Click to expand...
Click to collapse
But I'm unable to install a ROM!
Recovering the phone as above also puts ClockworkMod on, but it fails to install the ROM with file signature errors, trying both the CM and Gapps gives the same error.
Also trying to install ClockworkMod using heimdall as I did previously also give an error
Code:
Session begun.
Downloading device's PIT file...
PIT file download successful.
ERROR: Partition "kernel" does not exist in the specified PIT.
Ending session...
Releasing device interface...
All I want is CMmod back on again!
After quite a few attempts at different ways and a few 'black screens of death' I've managed to get it completely back to stock using heimdall following this. My head is spinning!
Now I've just got to start with CWmod and CMmod again. Now it's stock I'm tempted to try and root it.....but that was the start of the problems last time!
After trying to root again and another bricking I decided to give up with the root!
The issue is when trying to install CWmod I get the same error as in post #4, which means I'm completely lost now as the phone was back to stock.
[email protected] Ok coming from a Windows background I forget about case, and the CMmod wiki is incorrect. The issue is as I've had my head spinning so much I forgot I did this last time!
eusty said:
After trying to root again and another bricking I decided to give up with the root!
The issue is when trying to install CWmod I get the same error as in post #4, which means I'm completely lost now as the phone was back to stock.
Click to expand...
Click to collapse
EDIT: Ok coming from a Windows background I forget about case, and the CMmod wiki is incorrect. The issue is as I've had my head spinning so much I forgot I did this last time!
EDIT AGAIN: Now it doesn't boot again!
eusty said:
But I'm unable to install a ROM!
Recovering the phone as above also puts ClockworkMod on, but it fails to install the ROM with file signature errors, trying both the CM and Gapps gives the same error.
Also trying to install ClockworkMod using heimdall as I did previously also give an error
Code:
Session begun.
Downloading device's PIT file...
PIT file download successful.
ERROR: Partition "kernel" does not exist in the specified PIT.
Ending session...
Releasing device interface...
All I want is CMmod back on again!
Click to expand...
Click to collapse
This was totally wrong way to install. Who adviced you to flash CyanogenMod with Heimdall? Are you not reading install instructions at all?
I adviced you yesterday to go with sticky threads here.
tetakpatalked from Nexus 7 flo
tetakpatak said:
This is totally wrong. Who told you to flash CyanogenMod with Heimdall? Are you not reading install instructions at all?
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
I'm not! I'm trying to install ClockworkMod using heimdall, I install Cyanogen from the SD after entering recovery mode.
http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
eusty said:
I'm not! I'm trying to install ClockworkMod using heimdall, I install Cyanogen from the SD after entering recovery mode.
http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
Click to expand...
Click to collapse
You have to flash a stock firmware and after that compatible kernel for it, as kernel and recovery share the same image on the i9000. So unlike other devices, the recovery can not be flashed separately. That's why the kernel must be compatible with the ROM.
If you have flashed once ROM based on Android 4.3 or higher, your partitions sizes have been modified and you must flash also PIT file together with stock firmware and enable re-partition.
tetakpatalked from Nexus 7 flo
Yes I've also flashed the PIT, I used the instructions from http://forum.xda-developers.com/showthread.php?t=1196179
which included it.
I will try to recover it using the sticky at the top of the forum then try CWmod again.
Thanks for the help [emoji3]
Sent Using Tapatalk
eusty said:
Yes I've also flashed the PIT, I used the instructions from http://forum.xda-developers.com/showthread.php?t=1196179
which included it.
I will try to recover it using the sticky at the top of the forum then try CWmod again.
Thanks for the help [emoji3]
Sent Using Tapatalk
Click to expand...
Click to collapse
If you're using Heimdall, be sure to use v1.31 as the later versions aren't working so good on the i9000 anymore.
Do you use Linux or Windows as your PC's OS?
tetakpatalked from N7100
I'll grab an older version of Heimdall as I think I downloaded the latest.
I'm using Windows (7 64 bit).... along with it's USB driver idiosyncrasies
Sent Using Tapatalk
I restored the phone to stock from your instructions at the top of the forum, then tried a rooted ROM.
Everything went fine, although I'm not sure if I had root access (as it worked I didn't bother to check). Then I tried CWmod but it still failed to install, so went back to stock again.....it still wouldn't install
From the ClockworkMOD website..
Download recovery -- you can directly download a recovery image using the link below, or visit clockworkmod.com/rommanager to check for the latest version of ClockworkMod recovery for your device (if your device can be found there).
Recovery: Semaphore_2.7.4.tar
Click to expand...
Click to collapse
If you use their link (me being lazy did) then it fails, but go to the website and find the image then it works!! It's a slightly different filesize, so maybe a different version?
The ironic thing it that on the CyanogenMOD site it mentions that the phone hasn't got to be rooted to install it, but what I didn't realise was CyanogenMOD it also installs a different firmware...which is rooted!!
At least through all this I'm a bit wiser as to flashing the phone etc :good:
@eusty Rom Manager app is useless for i9000, except for reading the names of nandroid backups.
tetakpatalked from N7100