Streak 7 dead! Help is appreciated - Dell Streak 7

So I have a streak 7 wifi only model. A few nights ago I upgraded manually to HC 3.2 with no problems. System seemed normal and everything in life was good. I forgot to charge my streak and when I woke up it was dead as expected as the battery was already low. So I plugged it in and let it sit for a few hours. Didn't even occur to me the light never came on for charging. So I figured I must have forgot to plug it in. When I looked it was plugged in correctly. So I plugged it in yesterday and let it sit for 24hrs and still no juice in the battery. I have tried unplugging the cable and reconnecting. I have tried using the power reset pin. I have tried different usb charging adapters. As I said it is dead so I can't get into the recovery menu to perform a factory reset. The power cord I got was just shipped to me on Tuesday Oct. 4 from Dell and worked fine when I first used it. Any help would be greatly appreciated.

Try this as it may not be the cord but the converter itself. Plug in the USB to a computer that is ON and RUNNING. In other words...not in sleep mode. Let it sit for a few hours and also note if the light comes on. It just may be the converter may have gone bad. Also try by resetting in using a needle and push it in the small hole to reset it.

AndroidOVERALL said:
So I have a streak 7 wifi only model. A few nights ago I upgraded manually to HC 3.2 with no problems. System seemed normal and everything in life was good. I forgot to charge my streak and when I woke up it was dead as expected as the battery was already low. So I plugged it in and let it sit for a few hours. Didn't even occur to me the light never came on for charging. So I figured I must have forgot to plug it in. When I looked it was plugged in correctly. So I plugged it in yesterday and let it sit for 24hrs and still no juice in the battery. I have tried unplugging the cable and reconnecting. I have tried using the power reset pin. I have tried different usb charging adapters. As I said it is dead so I can't get into the recovery menu to perform a factory reset. The power cord I got was just shipped to me on Tuesday Oct. 4 from Dell and worked fine when I first used it. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Do you have the original charger and the cable that was received from Dell is the right cable? I had one shipped from China and all it does is trickle charge, the original cable from Dell that came with my unit charges it in less than an hour on the same charger. Make sure your charger has at least 2 Amps output, cheap 1 Amps will only trickle charge

aelaan said:
Do you have the original charger and the cable that was received from Dell is the right cable? I had one shipped from China and all it does is trickle charge, the original cable from Dell that came with my unit charges it in less than an hour on the same charger. Make sure your charger has at least 2 Amps output, cheap 1 Amps will only trickle charge
Click to expand...
Click to collapse
Berryblue said:
Try this as it may not be the cord but the converter itself. Plug in the USB to a computer that is ON and RUNNING. In other words...not in sleep mode. Let it sit for a few hours and also note if the light comes on. It just may be the converter may have gone bad. Also try by resetting in using a needle and push it in the small hole to reset it.
Click to expand...
Click to collapse
I want to thank you both for your responses. I have had it charging for about 3-4 days now and it has not worked no matter what I try. I called Dell and they are sending out a new unit. It is scheduled to arrive today.

Plug a charger and force power off with a button(A small hole) next to SD card. Mine sometimes freezes not responding after screen off so I just do this trick, power on it and OMG it works
Cheers

Thanks - this worked for me

Related

[Q] Stock Nook: Battery too low to power ON.

Ok so this nook was bought brand new in December 2010 For my mother In-law. She hasn't used it much. So I asked if I could put Android on it? She said sure cause she hasn't used it at all. As a matter of fact the NC was totally dead when she gave it to me. So I get back to my house and put it on the stock charger. I let it charge for 2 hours. I picked it up and turn it on and all I see is this message: Battery too low to power ON. I did a search and turned up similar problems but the nc where all rooted. I'm wondering if other people have had this same problem? And what they did to solve this as it is more then likely an easy fix. A. Take it back to the store and exchange it. Or. B. Send it off for repairs. C. Someone On XDA has the answer.
Also I've done some trouble shooting like trying to reset it. Also I've used 3 Other chargers and its still not charging or turning on.
Edit: It turns on it just stays at the screen with a red battery displaying the message in the title. Also after charging for a while the screen kind of lites up like its going to turn on but only goes black after that and then comes back to the same red battery screen.
jvillejoe said:
Ok so this nook was bought brand new in December 2010 For my mother In-law. She hasn't used it much. So I asked if I could put Android on it? She said sure cause she hasn't used it at all. As a matter of fact the NC was totally dead when she gave it to me. So I get back to my house and put it on the stock charger. I let it charge for 2 hours. I picked it up and turn it on and all I see is this message: Battery too low to power ON. I did a search and turned up similar problems but the nc where all rooted. I'm wondering if other people have had this same problem? And what they did to solve this as it is more then likely an easy fix. A. Take it back to the store and exchange it. Or. B. Send it off for repairs. C. Someone On XDA has the answer.
Also I've done some trouble shooting like trying to reset it. Also I've used 3 Other chargers and its still not charging or turning on.
Edit: It turns on it just stays at the screen with a red battery displaying the message in the title. Also after charging for a while the screen kind of lites up like its going to turn on but only goes black after that and then comes back to the same red battery screen.
Click to expand...
Click to collapse
what are you charging from? are you using the stock nook cable and plug?
Yes. And charging it from the wall outlet. Did that with the stock charger. my charger from my HD2 and also tried with the charger from my vibrant. All have the same affect. It has the red battery and the messege below and it also has been a total of 6 hours of charging 2 hours each with the all the chargers.
That stinks. You may have to contact B&N for it. If your using the stock and other chargers then it must be a battery failure.
altimax98 said:
That stinks. You may have to contact B&N for it. If your using the stock and other chargers then it must be a battery failure.
Click to expand...
Click to collapse
Yeah seems to me thats what it must be I'll post back what I find out.
When that message is displayed, try holding the power button for 30+ seconds and then turning it back on.
That has worked for me the couple of times it seemed stuck on that screen.
RobertsDF said:
When that message is displayed, try holding the power button for 30+ seconds and then turning it back on.
That has worked for me the couple of times it seemed stuck on that screen.
Click to expand...
Click to collapse
Nope its not working at all. I was wondering is there an SD card that come with the NC bought brand new from B & N?
jvillejoe said:
Yes. And charging it from the wall outlet. Did that with the stock charger. my charger from my HD2 and also tried with the charger from my vibrant. All have the same affect. It has the red battery and the messege below and it also has been a total of 6 hours of charging 2 hours each with the all the chargers.
Click to expand...
Click to collapse
If you're using other chargers, it's possible that you've damages the usb port. The NC uses a non standard usb port, which has two stages. The first stage is standard 5 pin uusb communication, the second stage is non-standard 12 pin charging...
Sent from my Nexus One using XDA Premium App
Non-Standard chargers...
As far as I can tell it works fine with any microusb cord.
Their charger cables break...(bend and break) very easy. I have gone through 2.
The upside is that their charger provides power far faster than the normal microusb cords.
At this point...I'm charging mine almost exclusively from my stock evo cord.
If you don't turn off the screen when charging...it may not have enough power coming in to actually build a charge without their cable.
danger-rat said:
If you're using other chargers, it's possible that you've damages the usb port. The NC uses a non standard usb port, which has two stages. The first stage is standard 5 pin uusb communication, the second stage is non-standard 12 pin charging...
Sent from my Nexus One using XDA Premium App
Click to expand...
Click to collapse
I never used another charger besides the stock charger that came with the NC. Up until this happened all that was ever used was the stock cable for charging. I only used another charging cable once I ran into these problems cause I figured the cable was damaged. Its happened to me before with other devices. But the same results happen with every cord I use. When I plug it in it lights up and shows the red battery screen. So that tells me that the cord or USB port couldn't be the problem. Cause its clearly getting power its just not charging.
Fattychance said:
As far as I can tell it works fine with any microusb cord.
Their charger cables break...(bend and break) very easy. I have gone through 2.
The upside is that their charger provides power far faster than the normal microusb cords.
At this point...I'm charging mine almost exclusively from my stock evo cord.
If you don't turn off the screen when charging...it may not have enough power coming in to actually build a charge without their cable.
Click to expand...
Click to collapse
When charging I can not turn the screen off it's stuck on the screen with a red battery.
jvillejoe said:
Nope its not working at all. I was wondering is there an SD card that come with the NC bought brand new from B & N?
Click to expand...
Click to collapse
No. They sell it without one...the 8GB internal storage is enough for looooottts of books. The microsd was just a nice + for people with lots and lots of music.
I had this issue as well, but I found a fix!
No matter what I did or how long I let it charge, it would always have that red low battery icon.
What I ended up doing to fix it was opening up the back of the unit and disconnecting the battery cable from the unit. I then plugged it directly into the wall without the battery connected to see if it would boot, though I don't know if that was necessary, I don't even remember if it booted that way or not.. I think it did not.
Anyway I unplugged the power cable again, reconnected the battery, then plugged in the power cable and tried to boot and it booted up perfectly after that. The battery icon indicated 13% charge, but it quickly charged back up just fine.
FYI I left the unit in the car overnight right before this happened, and it was pretty chilly that night, 10-20 degreed Fahrenheit. I suspect that caused the issue for some reason, so I've been sure not to do so since.
P.S. I had to do a fair amount of googling around before I found good instructions on taking apart the NC. I think I had to take off the 2 screws under the SD card slot and use a butter knife to just pry the back off. It's just held in with clips and you can't tell it was opened except for the little stickers over the screw holes.
bstock said:
I had this issue as well, but I found a fix!
No matter what I did or how long I let it charge, it would always have that red low battery icon.
What I ended up doing to fix it was opening up the back of the unit and disconnecting the battery cable from the unit. I then plugged it directly into the wall without the battery connected to see if it would boot, though I don't know if that was necessary, I don't even remember if it booted that way or not.. I think it did not.
Anyway I unplugged the power cable again, reconnected the battery, then plugged in the power cable and tried to boot and it booted up perfectly after that. The battery icon indicated 13% charge, but it quickly charged back up just fine.
FYI I left the unit in the car overnight right before this happened, and it was pretty chilly that night, 10-20 degreed Fahrenheit. I suspect that caused the issue for some reason, so I've been sure not to do so since.
P.S. I had to do a fair amount of googling around before I found good instructions on taking apart the NC. I think I had to take off the 2 screws under the SD card slot and use a butter knife to just pry the back off. It's just held in with clips and you can't tell it was opened except for the little stickers over the screw holes.
Click to expand...
Click to collapse
Thanks for the feed back. I'm wondering by un-pluging the battery from the nook if it resets it. Kind of like if a phone freezes or if your computer freezes and you pull the battery. Seems like a plan. Not sure if this is what I'll do as I'm sure its still under warranty. If it comes back and its not covered or B & N wont replace it I guess thats my only hope.
im having the same problem as well it was off for a while and now its at the red batter screen. i guess ill try and take it apart?
CLMT said:
im having the same problem as well it was off for a while and now its at the red batter screen. i guess ill try and take it apart?
Click to expand...
Click to collapse
If your not worried about voiding the warranty then sure I guess its worth a shot.
So I got it fixed right. All it was was a faulty cable lol!
jvillejoe said:
So I got it fixed right. All it was was a faulty cable lol!
Click to expand...
Click to collapse
I had this problem too, but I'm not sure "faulty" is the right word for the cable.
My friend borrowed my nook and returned it with a dead battery (Thanks asshole). So I plugged it into my computer at work and just got the always-on low battery message. After 45 minutes I took it to my car so I wouldn't forget it. I plugged it into my USB charger in the car using a different cable. Two hours later, same state.
When I got home I pugged it into the Nook wall charger with yet another cable (not the nook's original) and got the same thing. I searched here to see if I could figure out what was going on and decided to try the original cable with the wall plug. literally two seconds after plugging it in it started booting into Froyo.
I'm sure I didn't have four "faulty" cables. I think those that are saying you should be using the original are correct. The others worked fine when the battery wasn't empty, but mine only responded to the original once it got to the point of the unending low-battery message.
Original charger / cable required with totally empty battery
Same here. With battery completely empty and non standard cable,stuck at red battery sign forever. With orginal cable, boots fine and charges.
solution I found
Have CM7 installed on SDCard, got the battery icon, even with the unit plugged into the charger with oem equipment. Held the power button 'til the unit turned off completely, removed the sdcard, rebooted. Nook booted into stock fine, turned off, re-inserted sdcard and rebooted. All is well.

[Q] Touchpad will not charge (even in WebOS)

I realize there is a bug in CM9 related to charging.
I was doing this on a friend's touchpad, and it's become un-usable.
It would trickle charge in Android / WebOS when connected to computer, but the Wall charger did nothing at all (regardless if powered off / android or webos).
The wall-charger is the only power supply she wants because she is travelling for a couple months. Computer trickle charge will not do.
I ran ACMEUninstaller to get rid of android, but webOS and wall-charger still isn't doing anything.
The webos + computer is trickle charging still though.
I threw on CM7 in hopes of having that clean something, but something still isn't right.
I uninstalled CM7.
Anyone else experience this?
Right now I only have webos installed, and only the computer trickle charge works.. :/
I am going to try running web doctor in a bit, but I need 25% battery before it'll work. I thought I'd throw up a question in case someone else has a response.
Did you try another power supply? If it charges via a PC connection but not the wall charger I would say you have a bad wall charger, or bad USB cable.
Also try rotating the plug end of the charger and then rotating it back to click into place. Sometimes the charger won't work because it isn't engaged properly.
Similar problem
I think I'm having the same problem. I got my TP yesterday from the woot deal and installed the most current CM9. I noticed today trouble with the charging. I plugged it in overnight and it was at 70% this morning. It charged very slowly plugged into my pc during the day, but this evening I plugged it into the charger for several hours and it's at 48%. I just got this thing, is it possible the charger brick and/or cord is bad already?
Update: well, after trying about 15 combinations of cords and charger bricks I found my HP USB cord is the culprit. Not sure why it lasted less than a day, but oh well I'm glad to see it's charging now.
motolich said:
Update: well, after trying about 15 combinations of cords and charger bricks I found my HP USB cord is the culprit. Not sure why it lasted less than a day, but oh well I'm glad to see it's charging now.
Click to expand...
Click to collapse
The HP USB cable is not particularly good quality. .. Mine died after a couple months, many other people have had the same happen too. Though having said that, the replacement cable I got FOC from HP is still alive and well.
Sent from my GT-I9100 using xda premium

Dell Streak 7

I work at a Surplus and Recycling office and a Dell Streak 7 Came through here today.
I would like to know if there is anyway to salvage this item and possibly get it to work.
First I will list information:
Dell Streak 7
3G version I think, Has the sim Card clot
Date: 2011.04
I have the service tag and other things but I won't list those here.
The problem I am having seems to be a Read only mode from what I have read. The tablet wont do anything, the charging light does not come on, the screen doesn't light up or anything. I have tried plugging it into the wall charger and the USB charger nothing will happen. I have tried pressing the volume up+power button and nothing happened. I have also tried hitting the hard reset button beside the SD card slot. Nothing happened then either.
If you could help me out at all it would be great,
Thanks
Try letting it sit on the charger for 24 hours.
Does this mean that there could be some dead battery issue and it just needs to charge for 24 hours?
Its possible. No way to tell really till we get it powered on.
Alright, so what if charging it for 24 hours does nothing? Just e-scrap it? haha
Wesley32 said:
Alright, so what if charging it for 24 hours does nothing? Just e-scrap it? haha
Click to expand...
Click to collapse
You might be able to request service from Dell.
It could also be a bad charging cable or wall charger, hence why its not charging.
So the charger is a 30-pin correct? could an older Iphone or ipod usb cable work to charge this, or to test if the OEM is bad?
Wesley32 said:
So the charger is a 30-pin correct? could an older Iphone or ipod usb cable work to charge this, or to test if the OEM is bad?
Click to expand...
Click to collapse
Nope, has to be a Dell specific one because the pin layout is different.
I let it sit on the charger and it did nothing. I think this thing is a f'ed up
Yeah, either dead battery, or bad cable/charger.

[Q] Used wrong charger, battery jumped to 100%

I wanted to quickly transfer something from my laptop to my new Droid Turbo, so I quickly grabbed a USB cable thinking it was my Droid Turbo's cable. I had accidentally grabbed my 2012 Asus Nexus 7 cable instead. I plugged it into a USB 3.0 port on my laptop and after transferring some things for two minutes I noticed my battery was at 100%. I thought this was strange as my battery had only a few minutes ago been 87%. That's when I realized I was using the Asus cable.
Should I be concerned? I usually almost religiously never mix chargers.
Edit: I have just discovered that the cable is damaged and partially pulling out from the USB end.. could this have anything to do with it?
I had the same issue, connected my phone to a USB 3.0 port to backup some date and was shocked at how fast it supposedly charged up to 100%. I used a 3 y/o cable from an old Galaxy S3.
USB 3.0 has nearly double the power output of USB 2.0. So that could have something to do with it. Using a different cable or slightly torn one won't make a difference. The battery percentages also aren't the most accurate all the time. Your battery should be fine.
Sent from my XT1254 using XDA Free mobile app
A USB 3 cable going to a standard USB 2 micro port? No voltage difference.
---------- Post added at 11:07 PM ---------- Previous post was at 11:06 PM ----------
When using a standard USB cable the port does not matter.
I do think the calibration of the battery is off. I've had it go from 93 percent to fully charged on my qi charger just a minute ago, and yesterday twice, once on the turbo charger and an usb port on my laptop. I fully drained the battery the first day, Friday, and I think either it's still learning or the calibration is off. It seems to show it draining quickly the first sixty percent, then really slow down the last forty. Now I don't like letting the battery drain too low, decreases the battery life and capacity, hopefully it learns or next update clears this up.
This also happened to me on a usb3 port, but with the original cable. I jumped from 88% to 100% in about 5 seconds. This can't be right. Has to be a bug.
I don't think this is related to faulty chargers/cables. I had the same thing happen to me yesterday using my car charger for the first time (that I've used on 10+ other devices without issue) and the phone shot up to 100% in a few minutes. Ever since I used that charger all my other chargers that were previously working fine (turbo, qi, etc.), are charging the phone too quickly as well. I hope someone can figure out a fix for this, or an update comes out soon. I just wiped my device and set it up again, I'll report back if it's fixed.
I had this issue, I killed the battery thinking it would fix the issue when It charged, It did not. I factory reset and that also did not fix the problem. phone would show as 100% charged even when really only 3% charged. I ended up getting a replacement from VZW store.
Update - replacement phone from VZW is doing the same thing, only charger that I have used is a TYLT qi compliant wireless charger. (shows 100% for 6hrs)
Also are you guys on system version 21.21.12 or did you take the update?
Same issue here. Started today. Had since release. Exclusively use Tylt Vu charger. Have latest update. On Dalvik.
Silvaire said:
Same issue here. Started today. Had since release. Exclusively use Tylt Vu charger. Have latest update. On Dalvik.
Click to expand...
Click to collapse
Mostly same here. Used the Tylt Vu exclusively, then used the Turbo charger once or twice. Phone was stuck at 100% for twelve hours yesterday, dropped to 93% after reboot. It appears confused as to what it should really be at. Seems that the Tylt Vu is the common thread here.
Fixed mine! after holding the power button for about 20 seconds the phone will shut off, I then charged the phone with the Turbo charger overnight which reclibrated the battery meter. This has not happened again since doing this.
Hope this helps!
XF1ber said:
Fixed mine! after holding the power button for about 20 seconds the phone will shut off, I then charged the phone with the Turbo charger overnight which reclibrated the battery meter. This has not happened again since doing this.
Hope this helps!
Click to expand...
Click to collapse
This also solved the problem for me, thank you!! (I had also plugged into a usb3.0 port before this issue occured, hope they address this with a patch or some kind of fix).
I'm also having strange battery problems the past few days. The other day, randomly around 4pm I happened to notice my battery said 97%...just not possible since it had been off charger since 6am.. Yesterday, battery showed 35% and then died 2 mins later, powered off. Tried the power button for 20 and charged overnight, but on my qi charger I woke up to it only partially charged and not charging anymore. took off and put back on charging pad and it charged some more until morning. It seems the battery isn't calibrated and not showing the correct readings...anybody else? (oh, and it's a samsung charging pad)
sincerity said:
I'm also having strange battery problems the past few days. The other day, randomly around 4pm I happened to notice my battery said 97%...just not possible since it had been off charger since 6am.. Yesterday, battery showed 35% and then died 2 mins later, powered off. Tried the power button for 20 and charged overnight, but on my qi charger I woke up to it only partially charged and not charging anymore. took off and put back on charging pad and it charged some more until morning. It seems the battery isn't calibrated and not showing the correct readings...anybody else? (oh, and it's a samsung charging pad)
Click to expand...
Click to collapse
unplug it from everything, hold power button till it shuts off, it will then show an accurate % reading. Plug into the turbo charger that came with it and walk away for an hour. Should re-calibrate and get you back to normal (assuming the issue you're having is the same as ours). this worked for me. good luck!
rhcreed said:
unplug it from everything, hold power button till it shuts off, it will then show an accurate % reading. Plug into the turbo charger that came with it and walk away for an hour. Should re-calibrate and get you back to normal (assuming the issue you're having is the same as ours). this worked for me. good luck!
Click to expand...
Click to collapse
Hey, when i power button until shuts off, I don't get a %....am I missing something? Thanks!
sincerity said:
Hey, when i power button until shuts off, I don't get a %....am I missing something? Thanks!
Click to expand...
Click to collapse
Sorry, needs to be plugged into turbo charger, I told you out of order, my bad.
plug into turbo charger, hold power till it cycles on it's own (you'll see the real %), leave plugged in and walk away for an hour.
Solved all of my problems, good luck!
(seems like this is caused by plugging into usb3.0 ports, and possibly some qi chargers. I use an lg qi charger overnight and have not had the issue. It happened to me when I plugged it into a usb3.0 port on a laptop).
great! this worked for me! thanks!
Well for me I've had this bug since day 1 and none of the fixes are permanent -- there's a bug in the software on Moto's side that needs to be dealt with. I posted a thread on Moto's support forum in hopes of raising the profile of this issue cause it's a showstopper for people like me who rely 100% on Qi.
https://forums.motorola.com/posts/a029dc63a5
Silvaire said:
Well for me I've had this bug since day 1 and none of the fixes are permanent -- there's a bug in the software on Moto's side that needs to be dealt with. I posted a thread on Moto's support forum in hopes of raising the profile of this issue cause it's a showstopper for people like me who rely 100% on Qi.
https://forums.motorola.com/posts/a029dc63a5
Click to expand...
Click to collapse
Hi all,
I've had this same issue and I'm not sure when this happened, but I certainly noticed it immediately after using Qi charger for the first time.
Can we confirm if anyone on this thread had this issue by using a wired charging device, or whether this issue is synonymous with Qi charging?
Wiggz said:
Hi all,
I've had this same issue and I'm not sure when this happened, but I certainly noticed it immediately after using Qi charger for the first time.
Can we confirm if anyone on this thread had this issue by using a wired charging device, or whether this issue is synonymous with Qi charging?
Click to expand...
Click to collapse
it happened to me after being plugged into a usb 3.0 port, I use a qi charger (LG) every night without issue.

Sometimes won't charge if plugged in

I've had my N6 for about two weeks now, and lately I've noticed it doesnt charge once I plug it in, I'll go to sleep and a few hours later its still at the same percentage, I check the battery stats page and it shows "Not Charging" I unplug it for a few seconds and the Charging icon sticks as like the phone thinks its still "charging". Another issue I've noticed just now today, it says itll take 4 hours to charge from 56%! Only way for me to fix these issues it is to restart the phone and itll work, mind you this issue only happens sometimes. Although I will say I plugged my LG G2 into the Turbo Charger, so IDK if that affects the charger in any way?
Does anyone else experience this? If this is something no one has I'm planning to swap the device out for another one.
Running SinLess ROM v1.0.3
what charger are you using for your n6? and where are you plugging into? wall or usb?
simms22 said:
what charger are you using for your n6? and where are you plugging into? wall or usb?
Click to expand...
Click to collapse
Sorry forgot to mention, I do use the Turbo Charger provided with the phone
XERO_Racer said:
Sorry forgot to mention, I do use the Turbo Charger provided with the phone
Click to expand...
Click to collapse
This may seem obvious but try a different cable. I had a cable that, when plugged in, my phone would say is charging but doesn't actually charge.
I've had my nexus 6 for a couple weeks now and the first time this happened I was using a wireless charge so I thought I didn't have it placed on the mat right. But it happened again last night whilst plugged into an AC charger. The AC charger is an LG charger from a previous Nexus. When I look at the battery graph it just flat lines for the whole time it was plugged in.
fictionoid said:
This may seem obvious but try a different cable. I had a cable that, when plugged in, my phone would say is charging but doesn't actually charge.
Click to expand...
Click to collapse
My turbo charger is doing the same thing the OP said. We have 2 6's and it also happened to my wife's the other day too. I thought it might have initially been a cable too so I changed that out and it happened to the second charging cable last night as well.
Just experienced this
I use the turbo charger also and just experienced this. I was at 25 % after playing injustice (which just murders this battery) and plugged in the USB and I looked back 5 minutes later at I was at 22 %. So I killed Injustice and waited about 5 minutes more and I was at 19%. I had to reboot to get charging and after 5 minutes of charging I was at 29% so it is weird stuff.
I've been noticing this as well, but my charger is an aftermarket charger by Tenergy (Amazon link), and I'm using an aftermarket cable. Missed my alarm this morning because the phone must have not actually been charging, even though the N6 always shows that it is charging. I haven't tested it thoroughly with the stock charger as I keep that next to my workstation, but it seems that others are having this issue even with the included charger. Frustrating, to say the least.
Same thing with my N6 on 5.1. I would say that 20% of the time i plug in it shows charging but doesn't charge, just maintains the battery at whatever percentage it was when i plugged it in.
I don't have to restart but rather just unplug and re plug in the charger, then monitor for a couple of minutes to make sure the battery is going up and if so it will charge normally.
I also have tried a few different chargers including the quick charger that came with the phone. same result.
the same. here
I have the same issue while charging n6 with Motorola terboxharger ... But it takes 3 h while charging with any other chargers .....any updates !!!
meto882006 said:
I have the same issue while charging n6 with Motorola terboxharger ... But it takes 3 h while charging with any other chargers .....any updates !!!
Click to expand...
Click to collapse
Wow, same here.... only just started to notice it. Using turbo charger as well...however upon using a normal charger, it seems to always charge. it it something with the turbo charger?
Yea it seems to be turbo charger problem , but how come I bought it just one month ago !!
I started noticing the same issue recently. I'd say it started after upgrading to 5.1. I'm using the stock turbo charger. I found a workaround that, so far, fixes it for me (3 nights in a row at least).
After plugging in the phone, I notice the battery icon shows it is charging. If I actually go into the battery settings though, it says it is NOT charging. If I unplug the charging cable and plug it back in while still in the battery settings page (you know, with the usage graph), then it starts charging just fine up until I get a full charge. As long as I do this each time, I seem to get a full charge. Annoying, yes. But not as annoying as waking up to à phone that never charged.
Sometimes it won't charge when it's not plugged in either
For my N6 to charge, I need to push the TC USB cable a little downwards for my phone to charge. Sometimes, it doesn't even charge at all. I'm considering to RMA this, if I can do it here in Norway.
my nexus 6 has different behaviours, if I charge it when it is turned on sometimes it stops the charging and I need to disconnect and reconnect the cable and charging starts again, so i need to be careful because i can't be sure that my phone will charge completely if i leave it alone. if I charge it when it is turned off sometimes it starts to restart continuously showing battery in the screen again and again, without charging. hopefully this happens sometimes, i dont really like this bug, i spent so much money for buying it and i dont want to control if my phone is charging or not when I plugged it, i just want to put in charging and coming bac when it is flly charged.
RMA it
I hope the first thing anybody does is check the charging port and make sure there's nothing in there. Take a strong, sharp toothpick and carefully dig anything out that shouldn't be there. Pocket fuzz etc...
I am having this same issue, my phone is brand new yesterday, running 5.0, I have these exact issues, seems to be only with the turbo charger because I use a slow charger for overnight next to my bed and the battery was full. But I can't seem to make the percentage actually go up with the turbo charger without restarting the phone first.
Any more info on this very annoying bug??
can't seem to figure it out
i have the same issue - my N6 is a couple of months old and it started on an overnight (not) charge. Now it's happening 1 in 2 charges so it's getting worse. I cleaned the connection, tried different cables, USB chargers and plugging into the laptop - no dice. It's going back to Google - annoying...

Categories

Resources