Related
Coming from Nexus one where it was no issues with installing ROMs. However life is not as easy with my SGS.
I'm using VMWare on my mac to use programs that are only for PC. My issue is getting the SGS to even show up in VMW. Anyone with some mac experience (I'm a couple of month old mac user after 15 years on PC) Who has made this working So I can start ODIN and get back to 2.2.
Kind regards
Frewys
MAC = fancy closed source Linux
anyways in VMware you have the option to ADD a USB device to your VMware machine, once you do that you can MAP the USB on the VM machine to the phsyical USB port where the SGS is connected to
Fancy, nice looking. I was curious and bored of PC.
This sounds interesting. I get the popup asking me to which machine to connect it to. But then absolutly nothing.. No missing drivers or anything in Device manager.
Do you have a link where to read more? looking around on VMWares sight is of course an option.. unless you can point me in the direction.
Kind regards
Fredrik
EDIT. Looking over VMWares sight didn't really give some help. So I'm still where I started. I even tried to disable the USB 2.0 since there where apparently some instances where it didn't work but in the end still no go.
Eh. Have you installed sgs drivers in virtual machine yet? Easiest is to install kies
Sent from my GT-I9000 using Tapatalk
Apple being notoriously strict on following the USB standard to the T might be an issue, I don't even think VMware gets around this but I could easily be wrong since it is software that is detecting hardware but I know people that have problems with the SGS that haven't been cleared up with VMware. I think they do this so customers are more likely to buy Apple branded products and they get their mega premium due to a lack of competition that their comps will support.
So, what happens that is applicable to you here, is that the device doesn't get recognized to begin with and Samsung (assuming they test on Macs at all) sees this at some point and says F it, it's not worth our time...possibly even under the belief that all mac users would want iPhone anyways.
PS, I don't consider this, nor am I trying to spread, FUD. That's just what I've seen from other Mac/PC device intermingling in other areas and part of the reason why many users can't charge their iPads on their computers.
I setup a small Windows XP install on Boot Camp. I already had it so I can play Starcraft 2 since it runs like ass in Mac but worked out perfectly for my phone too.
You could try installing the Android SDK.
I have installed Eclipse and the Android SDKs on my Macbook and use ADB to control my phone (debug mode turned on in the phone). That's the way I have developed and debug my Android apps.
I also have Parallels installed to use the Bootcamp partition from Mac OS X. I found I could only get Kies to work (USB debugging turned off again) when re-booting into Bootcamp, not via Parallels, so I guess Samsung is doing something funny at a low level USB driver level, which neither Parallels or VMWare support.
Thanks for all the reply guys!
@ickyboo, alovell83 Yes. Installed Kies. Installed separate drivers. No effect. It is not even in device manager list.
@decepticon The problem for me with bootcamp is to my knowledge (like I said new to Mac) they don't allow bootcamp on a partition HDD. Maybe I'm just "PC" and don't really need to make extra partitions to save time in case of need to reinstall (saving all music. images, movies etc on "D" partition). Enlighten me. Come to think of it. I could remove the extra partition install the bootcamp and THEN remake the partition?
(of topic. How much better FPS do u get on bootcamp compared to native mac? I ran it on my 2010 MacBook Pro 17" and have to lover the the settings pretty much to lowest settings to get playable frame rate)
@shawnfr that is interesting!! So I can use the bootcamp partion as a source in virtual machine!? Sounds sweet! Know if it is only possible in parallels? yea looks like there is something going on With the USB thing on the Samsung.. shame..
So After getting rid of all my PCs I had to use my fathers to finally flash the ROM. A LOT easier!!
frewys said:
@decepticon The problem for me with bootcamp is to my knowledge (like I said new to Mac) they don't allow bootcamp on a partition HDD. Maybe I'm just "PC" and don't really need to make extra partitions to save time in case of need to reinstall (saving all music. images, movies etc on "D" partition). Enlighten me. Come to think of it. I could remove the extra partition install the bootcamp and THEN remake the partition?
(of topic. How much better FPS do u get on bootcamp compared to native mac? I ran it on my 2010 MacBook Pro 17" and have to lover the the settings pretty much to lowest settings to get playable frame rate)
Click to expand...
Click to collapse
If you already have a spare partition then you can use it. Just run through the Boot Camp setup and it will walk you through it. You can read your Mac partition in Windows but it's read only to protect it from any Windows virus.
I haven't checked FPS because it runs so bad on my 2007 Macbook Pro but in Windows I get a noticeable improvement due to the newest nVidia drivers in Windows. Sadly Apple won't allow hardware providers to release drivers directly for Mac.
That is just it. I get this cryptic error that i googled and to my understanding it cannot install on a partitioned disk. Right now I'm copying my entire drive to an external so that I can remove the partition and copy it back after hopefully getting the bootcamp up and running.
No I know about that whole driver fiasco for Mac. They are waaaaay behind windows on the graphdrivers... But thankfully steam seems to put some sense in Jobes.
Coming from Windows I think that the virus thing is exaggerated.. I had ONE virus of negligence during 15 years of PC. But don't trust common sense to all other million PC users
frewys said:
That is just it. I get this cryptic error that i googled and to my understanding it cannot install on a partitioned disk. Right now I'm copying my entire drive to an external so that I can remove the partition and copy it back after hopefully getting the bootcamp up and running.
No I know about that whole driver fiasco for Mac. They are waaaaay behind windows on the graphdrivers... But thankfully steam seems to put some sense in Jobes.
Coming from Windows I think that the virus thing is exaggerated.. I had ONE virus of negligence during 15 years of PC. But don't trust common sense to all other million PC users
Click to expand...
Click to collapse
I don't know if it's relevant for newer MBPs but I did get a video update that says it solves issues with SC2.
I had some issues with Boot Camp and partition tables at first but I removed them all and did it all through Boot Camp and it worked fine. The virus things is exaggerated but common sense takes a back seat to "see me live on my web cam click here" lol
Been working on this annoying thing for a couple of hours.. Bootcamp is NOT very flexible.. But I found a way to "cheat" it.. I had to remove the second partition. Then make "system" partition the entire drive. THEN I make the Bootcamp partition. And after windows is installed I can repartiton the System and make my second "data" partition!! Messy. But hope it works. Installing windows soon.
The SC2 update didn't do anything for me. But I'm happy to see it.. At least that is a start.. I read it had some effect for some older MacBooks...
Nope.. No luck at all. Giving up for now on BootCamp. I guess I will stick to PCs for my SGS in the future. I dont really have time for gaming anyway so the issue with lack of partitioning is not really worth it
I have not yet had any luck getting my SGS to show up in a Windows 7 VM running on VMWare Fusion.
USB virtualization is a tricky animal. A device has to be enumerated twice - first on the host, then on the guest. I imagine the SGS is having a hard time with the low-level second set config request. This seems fairly typical with high-bandwidth USB devices like PDAs.
When I get to work tomorrow I'm going to try it out against VMWare Server and VMWare Workstation. I might even try Hyper-V just for giggles. Workstation has the ability to disable the set config command. So maybe it will have more luck (doesn't help Mac users though!)
ok. Interesting. Good luck with that
I just realized Mac has VirtualBox to! Anyone tried it? Maybe there is a small difference for the better in this case...
Hello, I can't seem to find anything related to this on google or your wonderfull website ( thanks to you folks i was able to root my htc desire and install cyanogenmod, as well as unlock it from the network), any way to the point, I switched network providers because ive had it with telus, long story short, i went to bell and had to get a new phone, so i tried this htc hd7, n i kick myself in the teeth, but im stuck with it now... n now that i can use my desire on any network, i popped my bell sim in and am using that, so, i want to use the 16 gb class 4 sandisk sd card out of the hd7 in my htc desire, windows doesnt recognize it, nor does kubuntu, and nor does the format utility windows comes with, the format fails... and of course the phone wont read it or format it through recovery or in OS, ive also tried a program called low level format tool, it sees it, but results in multiple errors when formatting, any thoughts?
you need a Nokia phone to format it. The SD card is locked.
Does it need to be a specific model? The only nokia device i have is an air card for my laptop and theres no memory card settings, i think i have a couple buddies that own nokia phones though, damn windows phail 7
guitarjunkie said:
Hello, I can't seem to find anything related to this on google or your wonderfull website
Click to expand...
Click to collapse
You must have not looked on Google very hard:
"format WP7 SD card"
Actually, thats the first thing i searched, which is also how i discovered the low level format utility, you can have absolute faith i've searched anything i could think of and explored multiple options that i could think of, including a kodak easy share c183 (fairly new digital camera) and multiple sd card recovery applications designed for digital cameras, ive tried using linux and both windows/linux OS disks, im thinking, now that the bootloader has been exploited for the the hd7, if i can port either kubuntu mobile or some third party android build to it, i would gain access to the card, then mess around with that, but theres gotta be some way i can format this bugger. ive also come across the thread that includes using the nokia phone, but i dont have one. this is the only other thing i could find besides the llft, is there anyone else out there that has wanted to use there 16 gigger out of the hd7 for some other device after upgrading to a 32gb card? i have skimmed these forums as well and turned up nothing
well i just came across this post and aim on the same boat... i have 4 16g and going crazy i will hate to see this 4 16 sd go to trash... just cause mocosoft have play bad with us.....
ps just like guitarjunkie i have try all i can think-off
well im going to render this question unasnwerable i think for the time being, until we can find an application that works, if there wll ever be such a time, i will keep posted if i find one, thank you almostinsane for your time and input about the nokia phone, and to my boys from microsoft, blast you all, creators of wp7 to eternal damnation! @#$%&*(random curse words) power to the linux community!
Hmmm my friend formatted his memory, but no longer has the software that he did that with... =\
Try this:
http://www.pendriveapps.com/format-fat32-larger-than-32gb/
If it failed try:
http://tokiwa.qee.jp/EN/Fat32Formatter/
Try the whole re-initialization thing...
If both failed, try to find something else which can destroy the partition table for the memory, then rebuild it using Disk Manager.
-Xeno
I'm thinking it's a virus that I have...my computer has slowed to a crawl and is acting all sorts of messed up...I've pulled the important info I want off of it. Wondering if reformatting and using a Linux OS would help...Considering dual booting windows and linux but wasn't sure if the problems would persist since I think it is a virus...I downloaded AVG anti-virus and comodo cleaning essentials...the computer is just acting WEIRD..won't recognize my wifi half the time, super slow to load...not starting in windows 7 starter...any advice is appreciated.
If you can start it in safe mode you can then go to start menu / accessories and choose run. Type msconfig into box that appears then press your keyboards enter key.
It will open a window with a few tabs, go to the one that says startup and you will see a list of programs windows runs at startup.
Untick those you're not sure are things you installed, malware and viruses often show up with a random name made of letters for example kwge.exe if you see weird names like that untick them then click save and ok buttons and reboot.
If you have a nasty program affecting pc its common for it to try starting up at boot time.
Another option is download malwarebytes malware scanner but you need pc able to start up to do these things even if only in safe mode.
Dave
( http://www.google.com/producer/editions/CAownKXmAQ/bigfatuniverse )
Sent from my LG P920 using Tapatalk
mistermentality said:
If you can start it in safe mode you can then go to start menu / accessories and choose run. Type msconfig into box that appears then press your keyboards enter key.
It will open a window with a few tabs, go to the one that says startup and you will see a list of programs windows runs at startup.
Untick those you're not sure are things you installed, malware and viruses often show up with a random name made of letters for example kwge.exe if you see weird names like that untick them then click save and ok buttons and reboot.
If you have a nasty program affecting pc its common for it to try starting up at boot time.
Another option is download malwarebytes malware scanner but you need pc able to start up to do these things even if only in safe mode.
Dave
( http://www.google.com/producer/editions/CAownKXmAQ/bigfatuniverse )
Sent from my LG P920 using Tapatalk
Click to expand...
Click to collapse
Thank you...the computer will start up the issue is that I will get about 80-90% done installing an anti-virus or using the Comodo Clean up and it will restart...thinking the virus maybe blocking it from using an application like that...I want to run Jolicloud or another Linux based OS if you know any made for netbooks. It will go into startup repair when it restarts and won't finish the startup repair deal
So something is seriously wrong with my computer...every anti virus/cleaning program has frozen and gone to not responding...AVG Anti Virus, Comodo Cleaning Essentials and now Malwarebytes Anti Malware...this is getting ridiculous...how I reformat this piece of **** and get a non-Windows OS on here? I have Jolicloud on my SD card.
semperfidoordie said:
So something is seriously wrong with my computer...every anti virus/cleaning program has frozen and gone to not responding...AVG Anti Virus, Comodo Cleaning Essentials and now Malwarebytes Anti Malware...this is getting ridiculous
Click to expand...
Click to collapse
Google a program called rkill from bleepingcomputers.com, download this program and run it, it will stop most processes when it's done, allowing you to run Malwarebytes.
Good luck.
Sent from a pay phone, and yes I DID search before posting
Trying it now...just wondering if a new laptop/netbook would be a better idea...I think the HDD in this one is dead from everything I've read online...just want a Ubuntu or other Linux OS laptop I'm done f_ing with windows lol
Tried installing Julicloud (Ubuntu) got it to load after restart to dual boot menu...selected jolicloud go to about 95 or 96% and it restarted and came up with the message "No init found. Try passing init=bootarg. Busybox v1.13.3 (Ubuntu 1:1.13.3-lubuntutii) built-in shell (ash) Enter help for a list of built in commands.
(initramfs)
help???
That's sounds more like a hardware issue because your problems are still there even after formatting.
Try to run a short dst then a long dst. Look up on google on how to get there for your computer. To me this sounds like a software issue more then anything else but try it. If either one fails your hdd is really close to dead. I just went through a short dst failure on my hdd so to me it doesn't sound like hardware but dot your i's and cross your t's kinda thing. If both pass then its most deffinitly software. Try an online antivirus toll so that there is nothing to install. If you are still having issues and your sure its a virus and you want to go to linux then write zeros to your hdd. Basically its a massive reformat. Reformatting can sometimes leave the the virus on the sector of a hdd and still make your computer run like ****. But writing zeros is basically a very thorough format that takes a bit of time and usally formats it quite a number of times.
Or go an easier root buy a new hdd, take out the old one put in the new one in the computer and install jolicloud and destroy the hdd then through it away and be done with it.
Sent from my DROID X2 using XDA
semperfidoordie said:
Tried installing Julicloud (Ubuntu) got it to load after restart to dual boot menu...selected jolicloud go to about 95 or 96% and it restarted and came up with the message "No init found. Try passing init=bootarg. Busybox v1.13.3 (Ubuntu 1:1.13.3-lubuntutii) built-in shell (ash) Enter help for a list of built in commands.
(initramfs)
help???
Click to expand...
Click to collapse
Not used that myself but did a google search and found someone who had the same problem and blogged about how to fix it.
The page is http://codeabout.wordpress.com/2011/03/05/fix-your-non-bootable-linux-partition/ hope it is of some use.
Basically it would appear that by installing a second os you have made the boot sector unusable for the second one. Some netbooks allow you to select a specific partition to boot from, if yours does you can tell it to boot from the linux one.
Its usually done by pressing a function key before it tries booting but most netbooks don't allow it so just mentioning it in case yours does. Keys differ depending on model but typically is f1 though one was the del key.
Dave
( http://www.google.com/producer/editions/CAownKXmAQ/bigfatuniverse )
Sent from my LG P920 using Tapatalk
Damn I guess I will start looking at HDD's mine pretty much instantly failed the short DST test. Any advice on upgrading netbook memory while I'm in there? I know how to take it apart and all just don't know a lot about upgrading these little things.
Man things go from bad to worse lol...tried to run chkdsk and now everyone it boots it boots running chkdsk and freezes after 6% and having quite a few bad sectors. Is there a way to bypass this and get it to start with command prompt? If I buy a new HD could I install a Linux OS right off the bat and not mess with windows? Also is there any definitive way to tell without a doubt it is the HD?
Yes you can switch hdds and see if the problem still occurs... if not then the problem is fixed.
That's a good point. I am considering buying a new laptop and starting fresh...wish you could build one like you build a desktop. I want one built the way I want it running on a Linux OS. Don't really want to waste the money buying a new computer and paying for Windows and not use it.
Hmm... Have you tried to install Ubuntu? I recommend you use Wubi to install and dual boot it with some dead simple automated repartioning
Sent from a blaze of amazon using Tapatalk
semperfidoordie said:
That's a good point. I am considering buying a new laptop and starting fresh...wish you could build one like you build a desktop. I want one built the way I want it running on a Linux OS. Don't really want to waste the money buying a new computer and paying for Windows and not use it.
Click to expand...
Click to collapse
Not sure if that's available there, but here we get pcs with no OS or DOS, and then you can install what you want
Sent from my GT-P1000 using XDA
This is what I would do, if I were you...
First and foremost, make sure nothing is wrong with the hardware itself. The most common issues are with the HDs, as they tend to break first...
Schedule a diskcheck from the disk properties, and make sure to check the surface for errors also.
Then I would start the hunt for the virus, if it exists. Bear in mind that formatting the disk and installing another OS does NOT eliminate some virus types, like rootkits, so you have to make sure that the disk is clean before doing anything.
For a quick test, I always download a portable version of Superantispyware and do a smart scan. Then I'll download from Malwarebytes and do the same.
You may or may not solve your problem with the above. In case you don't, keep reading...
The most secure and guaranteed way of virus checking (and cleaning) is with a Rescue CD or Usb key. Download yumi, it lets you make a multiboot usb key with multiple rescue cds. Don't worry about finding the cds, it has the option of doing it for you, from inside the utility. I will go for Avira and Kaspersky, make a boot usb key and boot my pc from it to check for viruses, particularly rootkits. You can also try with other companies, if you cannot find any viruses with Avira and Kaspersky, like Panda or F-Secure...
shravbits said:
Hmm... Have you tried to install Ubuntu? I recommend you use Wubi to install and dual boot it with some dead simple automated repartioning
Sent from a blaze of amazon using Tapatalk
Click to expand...
Click to collapse
I have tried but I get an error when trying to boot using Jolicloud (a netbook version of Ubuntu) I may a different version though.
cdesai said:
Not sure if that's available there, but here we get pcs with no OS or DOS, and then you can install what you want
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
That's pretty cool. The computers are out there it's just finding a company that will let you build one that way haha. Everyone seems to have a hard on for Windows crap.
ptmax13 said:
This is what I would do, if I were you...
First and foremost, make sure nothing is wrong with the hardware itself. The most common issues are with the HDs, as they tend to break first...
Schedule a diskcheck from the disk properties, and make sure to check the surface for errors also.
Then I would start the hunt for the virus, if it exists. Bear in mind that formatting the disk and installing another OS does NOT eliminate some virus types, like rootkits, so you have to make sure that the disk is clean before doing anything.
For a quick test, I always download a portable version of Superantispyware and do a smart scan. Then I'll download from Malwarebytes and do the same.
You may or may not solve your problem with the above. In case you don't, keep reading...
The most secure and guaranteed way of virus checking (and cleaning) is with a Rescue CD or Usb key. Download yumi, it lets you make a multiboot usb key with multiple rescue cds. Don't worry about finding the cds, it has the option of doing it for you, from inside the utility. I will go for Avira and Kaspersky, make a boot usb key and boot my pc from it to check for viruses, particularly rootkits. You can also try with other companies, if you cannot find any viruses with Avira and Kaspersky, like Panda or F-Secure...
Click to expand...
Click to collapse
I have downloaded Malwarebytes, Comodo Cleaning Essentials and AVG. None of which have been able to complete a scan the computer will always freeze up and shut itself off before they get the opportunity to. I have finally been patient enough to let chkdsk run though and so far although it's taking forever it has been finding bad sectors, replaced a bunch of bad clusters and what not. I am hoping when this finally finishes it may function somewhat more normally.
If your hdd failed the short dst then your hdd is pretty much gone, dead, about to be taken off life support, and it needs to be replaced. Which explains why its failing to install programs, jolicloud and would seem like a virus.
Its a dying hdd. Go to bestbuy, newegg, microcenter, etc and buy a 2.5" hdd. Then install it into your netbook. Once you replace your hdd you will need to install a os as there will be nothing for the netbook to boot up. So choose jolicloud, ubuntu, win7 or what not and you will be good to go.
Once you done all that buy a 2.5" housing for the hdd. Basically this will make the internal hdd into an external hdd and plus it in via usb and copy all your files to the new one.
The only thing you can do for a short dst failure is to replace your hdd. Nothing else will work. Its only allowed matter of time before it can't even be accessed.
Ps if you never removed a hdd from a netbook or laptop its a little bit different from a desktop. You need to remove the brackets from the old hdd and put them on the new one so you can install it.
Also the checkdisk repairing sectors will not fix a short dst failure. That is a hardware issue. All you are doing is waisting time. Your computer is crashing and restarting its self cause the hdd is having issues trying to process the info on a hardware level, not software.
If you manage to repair all the sectors it won't mean anything. Cause if you try to still do any installs (mine going through a short dst allowed installs btw) it may still fail and any intense task will cause it to crash. And by intense i mean any multitasking could crash it. Your hdd is very unstable and os use a lot of the hdd functions. So when you make it an external to get the files off it becomes more stable because of the less work from the os allowing you to remove your files.
I know its not what you want to hear but the truth is hard to take at times.
Sent from my DROID X2 using XDA
semperfidoordie said:
That's a good point. I am considering buying a new laptop and starting fresh...wish you could build one like you build a desktop. I want one built the way I want it running on a Linux OS. Don't really want to waste the money buying a new computer and paying for Windows and not use it.
Click to expand...
Click to collapse
You can semi-build your own by going to the brands website (like alien, hp) and get one custom fitted for you. But you will still be stuck with windows7 at that point you can keep the serial codes and use them on your netbook to get a different verision other then starter on that if you decide to replace the hdd and get a new laptop. Or hold on to it if it turns out that you don't like linux on your laptop. Linux is not meant for everyone. And its nice to have a safety net just in case.
Sent from my DROID X2 using XDA
I have been looking all around the internet for a way to network a Windows Phone 8 to a homegroup. I am an Android user and will remain one, however I would like to also have the benefits of a WP. I bought a Nokia Lumia 520 (T-Mobile), however I have no plans to activate it. I bought the $99 phone to access a NAS, upload and dl content from it. All I have found at this point is how to connected it to WiFi when I google Network Windows Phone 8. I am not trying to connect it to the internet I am trying to network the phone. I would like to be able to map the phones memory as a drive. Does anybody know how to do this?
Not even close to possible, not at this time.
First of all, WP8 has no support for SMB (the network protocol used for Windows messaging). There are apps which implement it, at least partially, but that's it.
Second, the vast majority of the WP8 file system is inaccessible to users. All that you would be able to access is things like documents and music, and the isolated storage of whatever app you used.
Third, why would you do this? I mean, you can buy a few gigs of NAS for a hell of a lot cheaper than $100, with better performance characteristics and without reserving a bunch of space for an OS.
I've held for some time that WP8 devices should be able to connect to Homegroups (and ideally other SMB networks) but MS doesn't seem to care. That was mostly so I could transfer files onto and off of the phone while using it as my phone, though, not as some ludicrously overpriced bit of networked storage...
GoodDayToDie said:
Not even close to possible, not at this time.
First of all, WP8 has no support for SMB (the network protocol used for Windows messaging). There are apps which implement it, at least partially, but that's it.
Second, the vast majority of the WP8 file system is inaccessible to users. All that you would be able to access is things like documents and music, and the isolated storage of whatever app you used.
Third, why would you do this? I mean, you can buy a few gigs of NAS for a hell of a lot cheaper than $100, with better performance characteristics and without reserving a bunch of space for an OS.
I've held for some time that WP8 devices should be able to connect to Homegroups (and ideally other SMB networks) but MS doesn't seem to care. That was mostly so I could transfer files onto and off of the phone while using it as my phone, though, not as some ludicrously overpriced bit of networked storage...
Click to expand...
Click to collapse
I already have a NAS. I wanted to be able to pull video and music files from the NAS and on to my phone. I also wanted to be able to use the NAS as a source of storage for the phone. It would have been sweet to have my NAS as a mapped drive on my WP..... I am saddened to know that my Android can kind of do this with SAMBA, but my WP can not. I have seen many people get blasted on here for complaining about WP after they buy the phone and not doing the research before hand. I guess I shouldn't have assumed a windows phone would integrate into my windows network.
Edit:
I did thank you for answering my question, however I didn't overlook your desire to degrade my post. I never said I wanted to use it as an overpriced NAS, I said I wanted to be able to map the memory of the phone to transfer files off of my NAS and on to my phone.
Apologies for misunderstanding your intentions; when you mentioned connecting the phone to the network and mapping its storage as drive, but not activating it, that's what it sounded like. Yeah... while it is too bad you bought the phone without checking this first, one really would assume that Windows Phone 8 could connect to Windows networks...
I used Metro File manager to access SMB in the past, I don't know what are you trying to do.
Hey guys, ordered my first Pi 2 Model B today, should be here very soon! I've got the media center ready, (Using a portable HDD with a powered hub) Will be installing Kodi, OSMC with the supplied n00Bs SD card that comes with the package. That's all sorted "I think" should be quite easy.
I've just put Recalbox on a SD Card ready to also install and then I can run both recalbox and my media center at different times. using both SD Cards.
I have a slight problem though, I don't think I'll be able to network into the Pi, to put the ROMs into the proper folders, So how do I put the games onto the SD card? Can I just take the SD card out of the Pi and put it into my laptop and transfer the ROMs??
With Neo Geo, What do I do to get anything working at all? I've downloaded "piFBA" But I just can't find ANYTHING thats even remotely user friendly tutorial for a newbie with Linux etc on what to put where, It's like they just expect EVERYONE to know exactly what to do, And I'm quite PC savvy in some sense, so I'm a little dumb founded why I'm struggling to find much info, Is the Pi just not that popular ? I really don't know.
I "think?" I'll be fine with everything installing, but I think I may be stuck with the roms, and putting them into folders etc. I've even pre scraped the games to get it ready and make it a quicker install!
I also think I'm going to have problems with Mame/NeoGeo.
I'd love some help ! Or a link to a super easy informative tutorial on a step by step guide on exactly what to do.
I think I've defiantly decided on recalbox over retropie and emulation station, I just love the simplicity it's offering, and for now I think it'll be a good choice...
But I'm so lost and confused, I can't seem to find much help.