Touch Screen Freeze for Nook Color? - Nook Color General

My nephew may have or may not have smacked the touchscreen too hard playing angry birds. We are not sure, he is 4, but has never been rough before this with eletronics.
So I had a rooted phiremod cm7 nook. The screen stopped responding. I, thinking it was toast, reformatted back to stock since it is under the 1 year warranty still.
Now the screen works. This is great. I need to know if this could be just a fluke though. Did perhaps the screen crash from 4 year old fingers trying to get it to do ten things at once? Could something be loose in there, just waiting to die? It has frozen up before but in the past waiting a second always brought it back to normal. This time, several restarts and nothing. The touchscreen did not respond till after the reformat.
Now it seems fine but it did do this weird flashing over response thing when I tried to read the notifications in stock.
Should I take it back and tell them the screen is being wonky or not? What are the odds of it needing replaced/repaired?

Did you restart before you reflashed? Every once in a while my screen just completely stops working and I have to hold the power button until it turns off. And then all is good, seems to happen when it gets bogged down in an application

So it's just a thing these do then?
Whew. I was not looking forward with dealing with warranty repairs or replacement. I will just reflash it then.. after I mess with it some to be really sure..

I believe so, I used to have the screen freak out and phantom taps but a screenprotector solved that problem. I think its just because the screen is so sensitive

Hmmm.. my Nook is naked. It spends most of its time at home by my bed or in a practically perfect sized bag for travel so it was not something I worried too much about. But if it will help...
I will 'dress' my nook. A screen protector, a silicone thin skin and I'll even get a cheap leather case just in case.
And I think I need to stop lurking so I can edit my posts faster.

It couldn't hurt, I recommend getting a three pack of "crystal clear" ones from eBay at about $3. You will want more than one in case you don't get all the dust off the first time

Related

my tilt turned white

i took it out of my pocket to see what time it was, and the phone is white, i reset it, hard reset it, flashed new rom, flashed new spl.. no luck.. everything is just white.. phones operation remains intact.. but i cannot see anything that is happening. there is probably a thread on here about it, but all i saw was about wrecked spl flashes.. what can i do?
A number of people (including myself) have experienced issues with the Tilt screen going to a permanently "washed out" white. Unfortunately, this appears to be a hardware defect, and the only thing you can do at this point is flash everything back to the original settings and exchange the phone (assuming it's still under warranty).
Brrrrrr. This sounds like the horrors with the hermes!!!! Plz. let this not be true, it is the reason why I am stuck with a Kaiser for 2 years now instead of with a Touch Pro/Vario IV at the end of this summer :-((
By the way shouldn't this post be moved to Kaiser General?
return it its coverd under warantee or even if is not they'll fix it its known issue
turned white you say? quick head down to the apple store. you can bump it for 350!
just remember to say "no im serious...its real...look...theres the 3g sign.
Just buy a new LCD....i believe the problem is in the flex cable going to the screen. Hardware problem's suck. But it's the only fix i know..or send it to one of those expensive fix places online.
Like when poop gets really old it turns white?
i had this happen before on an old tilt. it happened on hot days outside the screen would turn white. i couldnt figure it out, it prolly happened about 10 or 15 times this summer.
my fix...
mash down on the area around the lcd. most of the time it worked if i mashed down in the center of the little 1/4 inch thick strip of plastic btwn the bottom of the screen & the bottom buttons. if that doesnt work, try all around that strip. that worked prolly 90 or 95% of the time for me. a couple times it didnt work & i had to mash around the whole screen.
i know it doesnt sound kosher, but hey percussive maintenance always worked back in my vcr days.

screen problems?

i got my td2 just about a week. yesterday suddenly the touchscreen didnt work at all anymore! i was taking some pictures and then it stopped to do anything on the touchscreen. i rebootet the device few times but no go - even removed the battery but didnt work anymore. then i left the device a few minutes without battery and when i tried it again it worked. this scared me a little... because without touchscreen u are really lost with this phone.
ohwell.. i hope this doesnt happen again. but i actually got another strange thing here:
if i look into the screen from the side.. i can see a strange glimmer sometimes. it looks like oil in water... it does glimmer a little and its not visible all over the screen but the part does even grow. i noticed this yesterday and it was like 5cm long and 2cm width. but now its almost on the full screen and it looks like the effect when u press on a LCD screen really hard. but it appears without doing anything.. does anyone have that too on his TD2??
same problem here. its the device of a friend. one week old. but we didn´t managed it to bring it back to life again...
no we will try a hard reset.
battery was out for ar least 30min wizhout success.
even noticed some glimmer at the screen. hard to describe. like liquid between sreen and screen protector.... but only on those parts were we tapped on the screen...
no we try the hard reset - i´ll report how it worked.
somebody else with that problem here?
ok we tried a hard reset - no success. screen is dead. no way to setup the device. no reaction of the touch screen. will go to the o2 shop tomorrow and bring it back...
wow.. at least im not the only one. my screen is working again but the glimmer didnt go away. also today appeared one more defect on the screen - it looked like the protection plastic is moving, but then after some tapping on the screen it went away again. very strange!
the glimmer looks indeed like a liquid between the screen and the protection. sometimes its almost not visibe and sometimes its really good to see. i wonder whats going on here..
hey i just found something out!!
my screen has something like little bubbles under it when i do touch it on a certain area. when these bubbles are visible.. my screen does not work anymore!! then i can clean the screen a while with a tissue or my tshirt or whatever and the bubbles go away - as soon they are not visible anymore the touchscreen works again!!!
im tryin now to give that phone back and get a new one. i dont even have that phone 1 week!!
I have a Diamond2 with the same frozen screen issue. The screen just did not react to any tap. Soft reset may put it back to work again, but the symptom repeated after some time. Even hard reset cannot rectify the problem. It is hardware defect. Fortunately it is one week old and still within the one-to-one exchange policy and I can take back to the shop I bought push for an exchange. Having email HTC and they just ask for service check and refuse to exchange a new one. If you conduct a Google search of freeze screen, you may locate a lot of touch screen issue but only very limited solution. I suggest you to have the device exchange than going to repair.
Does it look like this: http://forum.xda-developers.com/showthread.php?p=2557175#post2557175???
Hi, I am experiencing the very same problem. Touchscreen stopped working. Taking out the battery for 5 minutes fixed it. But there is a oily liquid now beneath the screen. My device is 5 days old, this should not happen
Taking it to the shop on monday.
we tried everything but without any succes...
today we gave back the phone. it was within the one week limit. but there is another limitation: 15 minutes airtime! i said to the guy in that shop: when he can show me the airtime, we keep the phone - because than the screen seems to work again... )
but no problem they exchanged it against a new one! good service, very customer friendly at o2!
I encountered this one day after getting my unit. I got a replacement. It seems two layers of the touch screen is "stucked" together. Use scotch tape to lift up the area and and the touch screen responds. But the next time you press on the screen it will get stuck again.
So get it changed.
wow
what a great idea... never ever thought of that... *lol* but when you buy such a sophisticated mobile it looks very unsophisticated to lift your screen with scotch-tape everytime you tapped on the screen...
muuu said:
Does it look like this: http://forum.xda-developers.com/showthread.php?p=2557175#post2557175???
Click to expand...
Click to collapse
kinda yes. but not that big and after cleaning phone with a tissue it goes away. i will get a replacement in a few days.. hope this doesnt happen again - but shop told me it seems that there are a few ppl with that problem on td2!! :-(
ok i did get a replacement now and all is fine again. but i think i know what caused the problem.
actually i had the phone always in my back pocket of my jeans. this is not a very good idea when you sit down. the phone gets some pressure on the screen and my screen actually was lowered into the case a little bit. you can see this from the side. that did cause the air under the screen and also the oily liquid that sometimes appeared. so i think the screen felt into the phone case and this was causing the problems. my new phone does not look like the screen is lowered - its totally flat. so i will take more care and not using back pocket of my jeans again to put the phone in
cko2 said:
ok i did get a replacement now and all is fine again. but i think i know what caused the problem.
actually i had the phone always in my back pocket of my jeans. this is not a very good idea when you sit down. the phone gets some pressure on the screen and my screen actually was lowered into the case a little bit. you can see this from the side. that did cause the air under the screen and also the oily liquid that sometimes appeared. so i think the sYcreen felt into the phone case and this was causing the problems. my new phone does not look like the screen is lowered - its totally flat. so i will take more care and not using back pocket of my jeans again to put the phone in
Click to expand...
Click to collapse
I hope you are joking... I mean one can't be serious about carrying a touch screen device in a back pocket of his jeans. Are you even surprised about what happened to it? In fact I'm rather surprised you got a warranty replacement. There is a thing called User manual that comes with the device a it is saying 'Always remove the device from the pocket of your trousers prior to sitting down'. Yu are really lucky indeed you got a replacement....
well aint a mobile phone made for putting in the pocket? this is not my first phone and i never had such a problem even with a touchscreen phone. its not like i did sit on it with full force or something.. just had it in back pocket during cardriving. you can easy do that with any other phone without breaking it...
cko2 said:
well aint a mobile phone made for putting in the pocket? this is not my first phone and i never had such a problem even with a touchscreen phone. its not like i did sit on it with full force or something.. just had it in back pocket during cardriving. you can easy do that with any other phone without breaking it...
Click to expand...
Click to collapse
that's exactly what's it's not - it's a pda phone and it kind of makes sense to treat it differently from normal mobiles which can withstand all sorts of abuse. also if they ask you specifically not to do something because it can damage the device - and you do it and then you are surprised it happened. it's written there for a reason. they surely know that for many people it will be their first pda phone so they don't have much clue how to treat it...

HOW TO: fix Droid/Milestone touchscreen lack of responsiveness and Ghost Touch issues

NOTE: THIS SOLUTION IS POTENTIALLY DAMAGING AND MAY NOT WORK FOR EVERYONE
PROBLEM: touch screen acts erratic, notification bar keeps opening, screen appears to be touched by someone else continuously (Ghost Touch), and parts of the screen DO NOT RESPOND TO TOUCH.
MY OWN SPECIFIC CASE: I had the Ghost Touch issue for 3 days suddenly without intro, which often used to go away after a reboot or two, then phone worked normally after I removed the battery and left it in a dry area (in a closed drawer between books, no air entering, very dry atmosphere), however the RIGHT SIDE of the screen (Search button, rightmost letters [L and Delete and sometimes ENTER] do not work. If the phone is in normal landscape, you cannot open the notification bar by dragging it normally.
DIAGNOSIS: for some people, the problem is more severe. The Digitiser itself could be malfunctioning and has to be fixed, while for others it could be a true problem with the screen itself. However, for MANY OF US, it is a problem of HUMIDITY. The humidity sensors are causing the phone to act like that. Some say part of this problem happens because the way the keypad affects the phone internally as you open and close it a lot.
SOLUTIONS:
1- To be safe: send the phone to the shop. Ask them to open the phone and apply an extra layer of insulation, in case the digitiser and the screen are okay.
2- If something is faulty, replace it at the shop.
3- MY OWN SOLUTION: based on something I read many times, the solution was to apply DRY HEAT for at least 45 mins. What I did, based on averaging out many experiences I read online, was to remove the SD Card and SIM, remove battery, I heated up a toaster oven for 10 minutes, waited until the temperature was at about 60-70 degrees Celsius, SHUT DOWN THE HEAT, put the phone on its screen on a plate, screen facing down and covered by a cloth to protect it from direct contact with metal, then all inside the oven. The oven is a relatively big one, so phone was AWAY FROM A SOURCE OF DIRECT HEAT. I closed the lid, then every while 15 minutes I would heat the oven for 40 seconds to maintain the temp. This is LIKE (ALTERNATIVE SOLUTION) leaving your phone in the glove compartment of your car while its parked in a sunny spot, to find it really hot in the morning and tough to touch for a while. TO CONTINUE, after the phone was out of the oven (I can't believe I am saying this), I left the phone overnight in a dry area for 8 hours (could need less time). Then, I put everything back in, plugged it, and THE PHONE IS WORKING PERFECTLY NOW!
NOTE that solution number 3 could affect your keyboard buttons if heat is too much. It may cause the glue holding the keys to melt a bit. Be delicate with your keyboard after you restore your phone.
Again, I only did this YESTERDAY. With the exception of some keypad stickiness, the phone is working perfectly now.
I hope this was useful
B.
EDIT: Today is the First of May, phone is still working without a glitch
N.B. Press the Thank you button if you wanna congratulate me on daring to toast my milestone in the name of scientific inquiry
SECOND EDIT: Phone did it again for 2 days. Applied the same method, and it worked again. I think partially it happened because I was in a very humid location.
That didn't work for me, I had no option but to replace the touchscreen/gorila glass.
I love the idea of toasting a milestone
Thought with all my aggression against Moto, I think I just might leave it in there
Luckily I dont have these problems so I wont get tempted
AirLancer said:
I love the idea of toasting a milestone
Thought with all my aggression against Moto, I think I just might leave it in there
Luckily I dont have these problems so I wont get tempted
Click to expand...
Click to collapse
I have to admit, I cared litte whether or not this actually worked. I just wanted to toast it But it did work, so
Pretty tempted to try this out, I think I will when I have free time.
My phone had the dead zone problem for 2 months now, but in some very rare cases, like when it's a very hot day, the screen will work normally for a minute or something. Then it goes back to dead part. I assume this would fix it?
Lesiroth said:
Pretty tempted to try this out, I think I will when I have free time.
My phone had the dead zone problem for 2 months now, but in some very rare cases, like when it's a very hot day, the screen will work normally for a minute or something. Then it goes back to dead part. I assume this would fix it?
Click to expand...
Click to collapse
If it DOES indeed work on hot days, then it means the phone is not entirely dead. But I would suggest you do something less drastic first, such as the Glove Compartment method. No responsibility though
If you're trying to remove moisture, you could also try putting it in a baggie of crystaline cat litter (NOT the clay kind!) - this stuff is sold at a MUCH higher price as a way to save a phone from water damage, but it's the exact same substance. Does a great job removing moisture. It's the same sort of silica gel that's in those packets in medicine/vitamins that says "Dessicant - do not eat".
Or you could just put it in a sealed bowl with raw rice for a couple of days... this is the best and cheapest way (and then you have the silicon "grains", the ones that you find in shoe boxes or computer parts boxes).
Sent from my Milestone using Tapatalk
CybeRNerO said:
Or you could just put it in a sealed bowl with raw rice for a couple of days... this is the best and cheapest way (and then you have the silicon "grains", the ones that you find in shoe boxes or computer parts boxes).
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
Pretty sure that rice doesn't do anything, I don't know how that started as a suggestion, but its not better than anything else; its not known to be absorbant, but the silicon is.
I've tried the method but the right segment of the digitizer still doesn't work.
My biggest issue with regards to "lack of responsiveness" are the 4 capacitive buttons. Pressing the Home key is always hit and miss. I know I hit it all the time because I can feel the vibration feedback but it only goes to homescreen 50% of the time.
Will also be testing this out as soon as I have the spare time. My screen started acting up after I accidentally put my milestone in a small beer spill at a party Hopefully this will work out for me too!
Abazel said:
I've tried the method but the right segment of the digitizer still doesn't work.
Click to expand...
Click to collapse
Luckily for me, I was still under warranty, heh. Cause I had insurance. This is my second Droid this has happened to. Hopefully my replacement won't do the same thing.
How many times did you reheat the oven? I tried just once and it didn't help. My phone has been having this problem since January.
decon89 said:
How many times did you reheat the oven? I tried just once and it didn't help. My phone has been having this problem since January.
Click to expand...
Click to collapse
I feel I am on a cooking show
Well, depends on your over. Mainly I was trying to maintain a temp varying between 50-60 c. Mostly 50, but sometimes 60 to up the ante a bit and make sure things stay warm. 30 minutes at least. However, I have to say that I did this twice in 6 weeks, and after that the phone just died again, and I found my warranty card and sent it there to be fixed, and they fixed it, but ruined something else.
If you have the warranty card, take your phone and send it to them Someone told me the method worked and the phone has been good for quite a while, but most of us seem to re-experience the issue after a while.
I've been having these issues for a few days now too, and I think I know why. I've been using this Milestone for 4 months now, and I never had this problem until a few days ago. What I noticed yesterday was that after some acting up, the phone started working properly again. So I ran Touch Test. And I noticed that if I pressed really hard on the top side of the phone(where the logo and the ear piece are located) it started acting up again. My first impression was that the glue holding down the gorilla glass was loose. So I left the phone as usual on my night stand and then I tried the same thing with the pressing on the same area. Guess what? It didn't happen again. Now there seems to be no problem. So I tried to remember what happened yesterday before the screen started acting up, and I remember talking to my wife for a while when I was in my car. Yesterday was a pretty hot day and I was a little sweaty when I talked to her. Now since only that specific part with the earpiece was causing this issue(I tried pressing equally hard on other areas without any problem my guess is that the insulation between the earpiece and the touchscreen has been breached. Maybe because of all the sweat that went in there in time. You know the salt and acids in the swear are known to melt things, and poor quality glue is among them.
How to fix this? I do not know yet, but I do have a good idea that I'd like to share. I want to buy a screen protector foil, and put just a little band around the ear piece. That would probably lower my in-call volume, but since the Milestone is very loud anyway I hope it the quality of the calls won't be too much affected. After that I'll use it in normal conditions again and see if the ghosting happens again.
try completely formatting your SD CARD/PARTITION.
& then reinstalling using (FAT 32/EXT 2, 3, or 4)
sometimes traces from the previous ROM might interfare with touch codecs (maybe)
just trying to help. had similar issue & this is what i did.
bandroid842 said:
NOTE: THIS SOLUTION IS POTENTIALLY DAMAGING AND MAY NOT WORK FOR EVERYONE
PROBLEM: touch screen acts erratic, notification bar keeps opening, screen appears to be touched by someone else continuously (Ghost Touch), and parts of the screen DO NOT RESPOND TO TOUCH.
MY OWN SPECIFIC CASE: I had the Ghost Touch issue for 3 days suddenly without intro, which often used to go away after a reboot or two, then phone worked normally after I removed the battery and left it in a dry area (in a closed drawer between books, no air entering, very dry atmosphere), however the RIGHT SIDE of the screen (Search button, rightmost letters [L and Delete and sometimes ENTER] do not work. If the phone is in normal landscape, you cannot open the notification bar by dragging it normally.
DIAGNOSIS: for some people, the problem is more severe. The Digitiser itself could be malfunctioning and has to be fixed, while for others it could be a true problem with the screen itself. However, for MANY OF US, it is a problem of HUMIDITY. The humidity sensors are causing the phone to act like that. Some say part of this problem happens because the way the keypad affects the phone internally as you open and close it a lot.
SOLUTIONS:
1- To be safe: send the phone to the shop. Ask them to open the phone and apply an extra layer of insulation, in case the digitiser and the screen are okay.
2- If something is faulty, replace it at the shop.
3- MY OWN SOLUTION: based on something I read many times, the solution was to apply DRY HEAT for at least 45 mins. What I did, based on averaging out many experiences I read online, was to remove the SD Card and SIM, remove battery, I heated up a toaster oven for 10 minutes, waited until the temperature was at about 60-70 degrees Celsius, SHUT DOWN THE HEAT, put the phone on its screen on a plate, screen facing down and covered by a cloth to protect it from direct contact with metal, then all inside the oven. The oven is a relatively big one, so phone was AWAY FROM A SOURCE OF DIRECT HEAT. I closed the lid, then every while 15 minutes I would heat the oven for 40 seconds to maintain the temp. This is LIKE (ALTERNATIVE SOLUTION) leaving your phone in the glove compartment of your car while its parked in a sunny spot, to find it really hot in the morning and tough to touch for a while. TO CONTINUE, after the phone was out of the oven (I can't believe I am saying this), I left the phone overnight in a dry area for 8 hours (could need less time). Then, I put everything back in, plugged it, and THE PHONE IS WORKING PERFECTLY NOW!
NOTE that solution number 3 could affect your keyboard buttons if heat is too much. It may cause the glue holding the keys to melt a bit. Be delicate with your keyboard after you restore your phone.
Again, I only did this YESTERDAY. With the exception of some keypad stickiness, the phone is working perfectly now.
I hope this was useful
B.
EDIT: Today is the First of May, phone is still working without a glitch
N.B. Press the Thank you button if you wanna congratulate me on daring to toast my milestone in the name of scientific inquiry
SECOND EDIT: Phone did it again for 2 days. Applied the same method, and it worked again. I think partially it happened because I was in a very humid location.
Click to expand...
Click to collapse
Thank you for that Solution.
It fixed the Issue of my friends MS without other problems
I'll have to try and the oven methode again. My phone has started to really act up again.
I've tried to install new roms, wipe ect. and it doesn't help with the screen.
Have anyone tried to replace the digiziter? They are pretty cheap on ebay
My milestone started freaking out just an hour ago. No more warranty here but I'm not brave enough to do the oven method. Had anybody tried the Rice alternative?

[Q] phone's touch screen having difficulties

my phone is having difficulties with the touch screen. at the top of the screen, it totally wont work when I touch it. do I need to replace the screen or is there a way to fix it? I cleaned the screen many times so, help me?
It's just the top part that isn't responsive?
DO AT YOUR OWN RISK!!!!! but it worked for me with my screen problems. I had dropped my poor hero in a glass of water. After quick action and rice it was dried pretty good but the bottom screen would go all wonky and only a reboot sort of fixed it till I stumbled on Google.
1st take out the battery and SD card!!!!!!! Can't stress this enough.
I had found if you took a hair dryer on high heat for about 2 minutes and move it around the screen during that time so as to not heat just a certain spot. After the approximately 2 minutes place something heavy like a big book but not too heavy to crack the screen and place it on top of the phone til it cools. About 15 minutes. Replace SD card and battery and boot up. Should be responsive as hell now.
Haven't had an issue since and can't tell its been in water unless you look at the stickers ... oh well I'm never selling it so
I had been dealing with the same nightmare your complaining of for weeks.
Eventually i had to reflash the clean sprint OS and take it to the store and within an hour they had replaced the touch screen and it was just like new. As of yesterday I did not have insurance but fortunately they have open enrollment for it, and at a cost of $4 for comprehensive insurance they were able to replace the touch screen.
Before biting the bullet and taking it to tech support I tried recalibrating the keyboard, flashing tons of different roms, cleaning it, but finally brought it in. I suggest you do the same since we are not the only ones complaining of this problem. Goodluck

Creaky back and other things?

Hello!
I've heard that HTC's have very good build quality, and I've had my IS for just over a week now, and I've noticed 'creaks'. At first I thought it was the screen, but I've now realised it's the back cover that creaks sometimes. If I were to replace the back/get a protective case such as a 'Barely There Casemate' would that stop the creaking? I tried to post a link but am too new to.
Also, I noticed this when I first bought my phone and put the battery in, the battery fits in, but has a bit of a 'bounce' to it. If that makes sense. I thought it wasn't fitting in properly, but it does, just not RIGHT against the phone... if that makes any sense. Dunno if that would contribute to the creaky back, or whether that's normal.
Also, how can I get my LED to stay on longer when I get a text message? It's a handy feature, but it seems to stop flashing after about 20mins, which is a bit of a pain if I don't look at my phone for longer than that.
... and last but not least, Angry Birds. Whenever I open any of the games, they freeze at the home screen. I then have to hit home and reopen them, get to the next menu it freezes, I hit home and do the same routine till it eventually starts working. What's the deal? I thought about maybe reinstalling them, but surely each of the games wouldn't have installed incorrectly?
THANKS ALL.
martyfly1990 said:
Hello!
I've heard that HTC's have very good build quality, and I've had my IS for just over a week now, and I've noticed 'creaks'. At first I thought it was the screen, but I've now realised it's the back cover that creaks sometimes. If I were to replace the back/get a protective case such as a 'Barely There Casemate' would that stop the creaking? I tried to post a link but am too new to.
Also, I noticed this when I first bought my phone and put the battery in, the battery fits in, but has a bit of a 'bounce' to it. If that makes sense. I thought it wasn't fitting in properly, but it does, just not RIGHT against the phone... if that makes any sense. Dunno if that would contribute to the creaky back, or whether that's normal.
Also, how can I get my LED to stay on longer when I get a text message? It's a handy feature, but it seems to stop flashing after about 20mins, which is a bit of a pain if I don't look at my phone for longer than that.
... and last but not least, Angry Birds. Whenever I open any of the games, they freeze at the home screen. I then have to hit home and reopen them, get to the next menu it freezes, I hit home and do the same routine till it eventually starts working. What's the deal? I thought about maybe reinstalling them, but surely each of the games wouldn't have installed incorrectly?
THANKS ALL.
Click to expand...
Click to collapse
I put a BodyGlove 2 piece case on my IncS and I do not notice the back sweaking anymore.
Oh, so the squeaky back is a common thing then?
Not for mine, I wonder if the problem is because one hasn't snapped the back on correctly.
It's definitely on properly. I've gone over the back a few times just to make sure it's clipped into place, so I dunno why it should do it.
Mine makes a noise at the bottom left corner of my case, got to admit its rather annoying. But i guess the majority of phones will unless its 100% flush with each other. Even when i put my otter case on it sometimes makes a noise.
The back on my phone is sometimes creaky as well. Since it's a malleable plastic, I'm guessing the weather/putting back on a certain way affects how squeaky or not it gets.
Ahh, okay, that settles it with the back then. Will just get a case. I need one any to give it a bit of protection, but it will hopefully stop the creaking. Am guessing the battery isn't a problem either if it's working in the phone... just me being a bit pedantic.
Anybody know if I'm able to make the LED stay on longer after receiving a text/notification?
OH! I've worked out what's going on with Angry Birds. Am presuming/hoping this is just an app problem. Basically, if I load the game and put the phone into landscape mode, the game won't work. I have to either hit home, or, spin the phone round into portrait mode, and then I can use the game. I then spin it back, choose the next menu and then put it back into landscape mode and then back again to get to the next setting/menu. It's a bit of a pain! Anyone know what's going on with that?
Thanks for all the replies so far.
Sorry for the bump. Anyone go any ideas for the game freeze and LED?

Categories

Resources