Related
I just used kies to update my firmware. I have a Bell (Canada) gt-i9000m (vibrant). The update left all my settings from the old FW and in no time at all my phone was force closing apps. Did a full reset and it runs nicely had to put back all my apn settings and stuff. The only thing that's changed with the new FW is that I cant change songs from my bluetooth car deck and I cant even play or pause anymore For me its kinda a huge deal cuz I put all my music on the phone to play in my car and it was all working so nicely i could even fast forward in the track that was a one up on my old iphone (with the old FW). Now none of my bluetooth deck controls are working I do see the 2 touch buttons light up on the phone when i push buttons on my car deck so the phone is getting the command its just not responding. Any Ideas would be most helpful.
The only thing that's different is that I haven't re-rooted the phone yet or applied the lag fix because I was having a lot of force close problems and did 4 resets so far (i assume due to the lag fix). I was hoping the new FW would fix more problems that it made... I didn't take note of the stock FW on my bell i9000m at the very least I would flash that back on to get my bluethooth controls back if anyone knows the stock firmware or how to make it work with the JH2 FW?
do a factory reset/format
then start with new settings, it will work after you pair the devices again
I did a factory reset when i upgraded the FW because of the force close error's but I didn't format. So I did another factory reset followed by a format of both internal and external. Took over 3h's to get all my stuff back on the phone and the bluetooth controls are still not working in the car.
From all the trouble shooting I've done its one of two things;
1. The firmware JH2 changed something with the A2DP profiles.
OR
2. I haven't rooted or done the lag fix.
Those are the only things that are different from before.
If anyone knows the stock FW for the i9000m (bell vibrant) and/or a link to download it. It would be most helpful.
I will try re-rooting and applying the lag fix but i have a hunch that's not going to make my car deck start working with the phone any better.
The car deck i have is a KD-BT1 (made by JVC). Just to be clear I was able to control my phone via the controls on the deck & its remote with the old firmware. I have deleted my paired phone and re-paired before and after factory reset & format.
that's very strange.
i've had that problem before, but that was expect of every new flash i made.
i always had to make the Car Deck (Clario CZ509) forget the old Galaxy S, then pair it again with the flashed Galaxy S, then it works all good.
else i get really weird behaviour on both phones and Car Deck
I can stream excellent audio quality to the car, with nice sub (no loss) and be able to control remote both phone and/or car from either the Car Deck, the SGS Phone, or the Remote control that came with the Deck
it automatically switch between phone calls and music
Sounds like i should reflash my fw. Do you have a link to where you got yours cuz kies is no longer seeing my phone... just hangs trying to connect. Its happened many times i know the uninstall drill to make it work but i've invested so much time into my sgs i rather use odin this time over kies.
I've un-paired and re-paired them agian and agian the pair up no problem and i make sure to check off the box that pops up to always allow my bt device to access contacts, ect. It all sync's up flawlessly just dont have control. The music streams very clearly for me also (2x10s subs).
Btw thanks for your very helpful responses!
I'm still thinking it might be cuz yours is rooted and mine still isnt. trying that before i jump the gun on another re-flash.
are you using the stock "Music Player" (w/ ugly pink icon)??
Update...
I rooted and did the one click lag fix. A2DP controls still don't work. I was able to use the car deck to answer, hang up, dail a number it got from my contact list! I'm not sure if those were or weren't working before... I was only really conserned with the music controls and they still dont work.
I also tried calling Samsung to see if they could help me out with why I always get the force close errors. No luck they told me to call my carrier i told them I bought the phone from a differnt carrier... I'm on Fido with Bell phone. Samsung said Bell has to get the RMA if i need one.
I've herd the lag fix helps bring to light any memory problems and creates those force close errors. This is one of my big underlying issues with my i9000m it crash's all the time. I've factory reset at least 5 times and once it crashed from google maps looking for an address and it got stuck on the boot logo. I had to wipe from the recovery menu just to call my friend when i was out side of his building for like 30mins (didn't know the buzzer #) I thought the instability was due to the root and lag fix but the phone runs a lot worse with out them...
(never dropped banged or any kind of water/wetness)
sorry if i got a lil' off topic but the phone is running worse over time...
The stock music player app (called "Music Player") doesn't respond to the standard AVRCP controls (A2DP is phone-audio-to-bluetooth, AVRCP is remote-control-to-phone). Most other music player apps will. Are you sure you were using the standard music player previously? Anyway the solution is to use a different music player app.
Yes i was using the stock player before it worked fine.
I will try another one. I have been thinking that maybe something was changed with the stock music player with the FW update or maybe i need to go settings->apps->Musicplayer and clear the data... Going to try both and post my results tomorrow morning. Getting to late to go out to the car... LOL
I had a look at forum.xda-developers.com/showthread.php?p=7980935 and thing maybe something did change with my AVRCP version.
I cant "1.0—Basic remote control commands (play/pause/stop, etc.)"
My stereo also has a phone mode that is working that lets me make calls and answer calls using the car stereo. I dont know if that is also AVRCP or just like a reg bluetooth ear piece controls.
Well I couldn't sleep till i tried it. I installed MixZing mp3 player and some of the mp3 controls work now. Play and pause and rewind track but It wont skip to next track. So it looks like you hit the nail on the head and something changed with the Music Player when I updated the firmware.
Does anyone have a rip of the stock Music Player apk from the old firmware?
4u2nvinmtl said:
My stereo also has a phone mode that is working that lets me make calls and answer calls using the car stereo. I dont know if that is also AVRCP or just like a reg bluetooth ear piece controls.
Click to expand...
Click to collapse
That will be handsfree profile (HFP).
So its safe to assume something changed from my stock firmware to the one kies put on JH2 with the MusicPlayer app with regards to the AVRCP controls. I have yet to find a link of the stock firmware that was on my phone when I bought it, on the lunch date in Montreal.
Anyone got a link to the stock i9000m firmware from bell?
Thanks for all the help getting to the bottom of the problem.
Went to Bell store today to see if they could flash the old FW like Samsung told me they would. Guess what... they said they couldn't help because I "hacked" the phone even tho its Samsung's firmware. Apparently the use of Kies has voided my warranty.
4u2nvinmtl said:
are you using the stock "Music Player" (w/ ugly pink icon)??
Click to expand...
Click to collapse
I was until i changed it to "Player" that is the name of the app.
the Stock MP3 player that came with JH2 was really good, it had 5.1 sound, which other players app does not support yet.
the only reason i ditched it was due the annoying way how to add music to the play list, the new app is just Point to the folder you want, and click on select all/play all, done
when you are in the car driving, you have no fricking enough time to go select which album or artist or genre.
but playing off the Folder structure, you know where you put which songs, so you can quickly skip folders, fast forward, or reverse to reach the songs you want
all that aside the stock music player works well with the Bluetooth remote control options
i was using the stock music player for about a week in my car via bluetooth until i got annoyed of not being able to quickly pick from the SD card the songs i wanted to play
4u2nvinmtl said:
Anyone got a link to the stock i9000m firmware from bell?
Click to expand...
Click to collapse
I flashed mine via Kies JH2
4u2nvinmtl said:
Went to Bell store today to see if they could flash the old FW like Samsung told me they would. Guess what... they said they couldn't help because I "hacked" the phone even tho its Samsung's firmware. Apparently the use of Kies has voided my warranty.
Click to expand...
Click to collapse
i think they meant the SIMs unlocked or the phone Rooted
since you are already on JH2 which is legit
Moving on to something more Vibrant
Update...
I got my phone back from repairs 2 weeks ago. They flat out replaced the phone for a new one. This was a huge headache for me because the new one wasn't unlocked. Took Bell 2 hours to get the new one unlocked wile my wife waited out side double parked downtown! (I thought it would be a quick pick up and I would be out) The blue-tooth works flawlessly again!!
Much to my dismay the replacement phone has started acting up much like my first one did. It gets several force close errors a day and has gotten to the point where it no longer can send or receive text messages (using Handcent). The stock Music Player app also force closes at random with more frequently. It looks like I got another Lemon. This time around I did NOT root, lag-fix, or flash firmware. I will be sending it for repairs as soon as I can afford to buy another phone to use wile this one is off at repairs. My back up phone is a 3~ year old Iphone3g that my son has made his... (cracked screen, vol rockers dont work, power button is jammed in, the LCD screen it self is bleeding on the top edge)
The Vibrant never let me down other than as a phone. As a divx player or using all-share it rocks! I use these features A LOT to play my 720p divx movies on any TV or the projector in the bedroom .
with that being said I might keep the phone just as a portable movie player to bring from place to place and put my sim in something more stable.
Hi guys,
I am having problems with car BlueTooth hands free and Samsung Galaxy S:
With Eclair 2.1 it was working flawlesly, connected automaticlay after paired, I could make phonecals, receive phonecals, no quality issue, phonebook worked fine etc... The only problem was that once I did not swithced the BT on my SGS before starting to drive, for some security reasons the car was not searching for phones while driving, so I had to turn the BT in car off and on again and then it connected well. But overal problem free...
With latest 2.2 Froyo (i9000xfjp7) and also previous Froyo distributions (i tried JPA if I remember correctly), the phone can be paired, it connects to the car but after one phonecall it looses connection and works no more. The strange thing is, the BT icon on the phone shows brackets (like when connected) and also the car shows the phone is still connected. But phonecalls cannot be made via car HF and also cannot be received through it. Only by manualy accepting or dialing on the phone. And naturally the sound goes only via the phone, no HF.
The strange thing is, when I turn off the car and leave it, the phone says it is still connected to it, which is impossible.
Any ideas?
Thank you!
czechmate said:
Hi guys,
I am having problems with car BlueTooth hands free and Samsung Galaxy S:
With Eclair 2.1 it was working flawlesly, connected automaticlay after paired, I could make phonecals, receive phonecals, no quality issue, phonebook worked fine etc... The only problem was that once I did not swithced the BT on my SGS before starting to drive, for some security reasons the car was not searching for phones while driving, so I had to turn the BT in car off and on again and then it connected well. But overal problem free...
With latest 2.2 Froyo (i9000xfjp7) and also previous Froyo distributions (i tried JPA if I remember correctly), the phone can be paired, it connects to the car but after one phonecall it looses connection and works no more. The strange thing is, the BT icon on the phone shows brackets (like when connected) and also the car shows the phone is still connected. But phonecalls cannot be made via car HF and also cannot be received through it. Only by manualy accepting or dialing on the phone. And naturally the sound goes only via the phone, no HF.
The strange thing is, when I turn off the car and leave it, the phone says it is still connected to it, which is impossible.
Any ideas?
Thank you!
Click to expand...
Click to collapse
Had exactly same issue I changed to Doc Rom JP8, for last 3-4 days didn't face any issue.
Monu123 said:
Had exactly same issue I changed to Doc Rom JP8, for last 3-4 days didn't face any issue.
Click to expand...
Click to collapse
That is weird... When I switch back to Eclair, it works OK, back to Froyo, no HF after one phonecall...
I dont know how to work with ROMs, I managed to find out how to flash firmwares, I even handled many problems with Odin and its moods, incomplete flashes, etc... But I dont know how to use these custom ROMs...
Anyway, i would appreciate if someone told me how to resolve it without custom ROMs, as I plan to use offical Froyo when it becomes available, but with this issue, it is useless for me, as I travel a lot...
No one else?
I'm having a related problem.
I'm getting music stream cut outs (1 sec max) when streaming bluetooth to caraudio WHILE wifi on.
If i disable wifi, bluetoothaudio works fine. I know they share range bt/wifi, but this is unacceptable. They should negotiate. Everytime wifi scans, i get cutouts. Unusable. Only workaround is disabling wifi (and thats annoying because i have to be constantly activating/disabling it everytime i enter somewhere with wifi etc.
Using Docrom xxjpo v8 with voodoo.
Anyone has some software fix that makes wifi behave better when bluetooth musictream on?
Okay, so lots of people have problems with their bluetooth. I am too. I have a JVC KW-XR810 car stereo and the bluetooth keeps shutting down on one or the other. My questions are:
Does anyone else have this stereo and problem? If so, whats the situation?
Is there a ROM that works flawlessly (or close to) with the bluetooth?
Its odd though, that my headset works perfectly and I didn't have many problems with another stereo I've used. Makes me wonder if its the stereo or the phone. Still, many others have bluetooth problems with this phone...
Thanks for any responses.
Stock Froyo
Rooted
One click lag fix
My last 3 phones (including this one) have all worked flawlessly with my Sony MEX-BT3700 head unit. Phone calls, BT dialing, streaming music, all work perfectly.
Yep, same here - AT&T replaced my Captivate under warranty about 2 or 3 weeks ago due to the random shut-down issue. Took the new one home, installed Froyo, and rooted it. Everything works well, except lately I've been getting frequent bluetooth disconnects from my car stereo (Pioneer AVIC-X920BT).
The usual pattern seems to be it's good for about one call, and then shortly after ending that call, I notice that they are no longer connected. I usually turn off BT on the phone (seems to take a while to terminate) and then turn it back on, but it will usually only be good for a single call. It's been frustrating, and I'm leaning toward the problem being on the phone side, since that's where there have been recent changes.
Must be a problem with Stock Froyo. Glad I'm not using it.
I've had this issue with certain roms I was running. I have a Kenwood KDC-X993. So far on CM7 it stayed connected.
Sent from my SGH-I897
i have the same (or similar) problem with my OEM headunit on a VW Golf. BT randomly disconnects but my music (pandora) still plays through the BT stereo, unless I stop it. Then its completely disconnected and I'll have to reconnect the phone to the car.
annoying but I just deal with it.
I'm running Paragon 6 and have a Dual head unit. I haven't had any disconnect issues, my problem is the crappy Pandora app.
mdaudioguy said:
Yep, same here - AT&T replaced my Captivate under warranty about 2 or 3 weeks ago due to the random shut-down issue. Took the new one home, installed Froyo, and rooted it. Everything works well, except lately I've been getting frequent bluetooth disconnects from my car stereo (Pioneer AVIC-X920BT).
The usual pattern seems to be it's good for about one call, and then shortly after ending that call, I notice that they are no longer connected. I usually turn off BT on the phone (seems to take a while to terminate) and then turn it back on, but it will usually only be good for a single call. It's been frustrating, and I'm leaning toward the problem being on the phone side, since that's where there have been recent changes.
Click to expand...
Click to collapse
Same here, I have a Parrot mki system in my car, but I found a workaround that I hope works for you too:
Unpair with the device, and when you re-pair it, when it asks you to synchronize contacts, do not let it. It will bug you every time it connects, but just ignore the requests.
I haven't had a single disconnect since doing this weeks ago.
I've read about the contacts request from other users but it doesn't happen with mine. Another thing, when I lose the connection and I turn off bt one the phone out shuts off. Completely. Pushing the power button does nothing. Holding the volume up and power buttons together for a few seconds seems to restart it but theres no animation. Just the lock screen, media scanner, etc. Maybe its restarting on its own and the button pushing has nothing to do with it. Also, I listened to my bt headset for hours last night with no probs at alI. Idk. Is bt different for head units? I thought it all used the same protocals.
So it seems that its not my head unit, but the phone. Are there any good solutions for us?
Sent from my SAMSUNG-SGH-I897 using XDA App
My head unit never asks to download contacts. Could it be that some do because they store that info in order to identify and announce incoming calls? That would mean there's more going on than just a simple BT connection.
Yeah. One post I read said something about it using a data connection the hu for contacts. I have no idea what he was talking about though.
Sent from my SAMSUNG-SGH-I897 using XDA App
My head unit have the ability to sync contacts. When I first paired it, the phone asks me for permission and there's a check box to always allow.
Sent from my SGH-I897
nahrah said:
My head unit have the ability to sync contacts. When I first paired it, the phone asks me for permission and there's a check box to always allow.
Sent from my SGH-I897
Click to expand...
Click to collapse
The only purpose I can see for this is if the head unit has an integrated nav system. That would allow you to bring up a contact as a nav target independent of the phone.
Okay, gettinging back to my original questions. So far we've established that this is endemic to the captivate, mostly. There have been two replies saying that cm7 and paragon 6 have stable bt connections with head units. I read in another post that axura works as well. This is so frustrating that I'm just about willng to learn how to flash this thing.
Sent from my SAMSUNG-SGH-I897 using XDA App
NvigR8 said:
Okay, gettinging back to my original questions. So far we've established that this is endemic to the captivate, mostly.
Click to expand...
Click to collapse
We have? My first post says I have zero issues with this on my head unit with my phone on Eclair, Froyo and now Andromeda. If it is a phone issue mine is not suffering from it. Sounds more like it has something to do with head units that store contact data. Mine apparently doesn't.
Hmmm.
Yet in your second post you posited that it must be a Froyo issue.
Regardless of whether it is the phone or OS, a lot of Captivate owners seem to have bt issues of one kind or another with various devices. Maybe this is just a bt issue in general that everyone deals with (not just Captivate owners) and I'm just being sensitive because I haven't had much bt exposure.
Any help is appreciated here. I'm just looking for suggestions on what to do short of buying a new phone or head unit. It would be great if other users experiencing this problem would benefit from the discussion as well.
So far it appears that flashing a different ROM may be a solution but which one? Is there any way to change only the bt stack?
Sorry if that sounded short, but I'm REALLY frustrated with this.
My hu will store contacts as most do these days, but it doesn't ask for them. I don't think the problem is related to the contacts. I guess its just a random incompatibility thing.
I said it "might" be a problem with stock Froyo. I didn't see it the 3 days I was running it and my current ROM is Froyo-based and working without issue. The only other variable I can see is that others posting problems have reported having to deny access to contacts, something my head unit never asks for, in order to get it to work. That would appear to indicate the difference is in the head units and not the phones, but unless I could connect to one of these other head units to verify, I'm only guessing. Sorry.
i notice that if I toggle the bluetooth on my phone right before connecting it to my car, it works flawlessly
Installed a Kenwood X994 and had all kinds of issues with BT. Worked for awhile but would never auto connect. Only vehicle and area where I had BT issues. I realized it was due to the downloading of contacts at every connect. sometimes it would download than immediately disconnect. frustrating. Was on serendipity, Tried a native Cappy ROM, Cognition and now Phoenix..
The unit has the Parrot system in it so it should be ok. Finally decided to update the Firmware on the HU. So far so good. I like the contact download so I don't need to use the phone at all to make a call. Receiving calls is no problem.
Will test further tomorrow.
BTW I have a BT Garmin mounted in the truck and used it before getting the head unit. no problems connecting. The only issue with that was a delay between pressing the call button and the call being made. Hanging up was an issue as well.
Hi guys, my capitvate just always disconnect with my car's bluetooth randomly.
I have to restart the phone each time becuase to reconnect doesn't work somehow.
is there any fix? anybody on the same table?
please advise.
chaolanren said:
Hi guys, my capitvate just always disconnect with my car's bluetooth randomly.
I have to restart the phone each time becuase to reconnect doesn't work somehow.
is there any fix? anybody on the same table?
please advise.
Click to expand...
Click to collapse
i have the same problem as some other people do as well. There's no actual fix, afaik, although the gingerbread roms seemed to have fixed it for me.
You can ask in the appropriate Q&A for your ROM.
chaolanren said:
Hi guys, my capitvate just always disconnect with my car's bluetooth randomly.
I have to restart the phone each time becuase to reconnect doesn't work somehow.
is there any fix? anybody on the same table?
please advise.
Click to expand...
Click to collapse
bravomail said:
You can ask in the appropriate Q&A for your ROM.
Click to expand...
Click to collapse
in his defense - although I could be wrong, I found that it has nothing to do with one particular rom. I had this problem on stock eclair and many of the custom froyo roms. Once I ran GB, the bluetooth was more reliable.
I'm having the same issue with stock 2.2.
I found a quicker method to fix it.
I downloaded a Bluetooth widget that toggles Bluetooth on and off - this seems to reconnect with my Jeep after the toggle:
com.curvefish.widgets.bluetoothonoff
I'm sure there are a ton of widgets out there; but, you may want to give that a try!
Thanks,
Shawn
I also ran into this as after chatting with Samsung support it turns out that the Galaxy line is set to never auto connect to any bt device even if the connection was already there.
I had trouble with disconnections from my car deck (jvc kw-xr810) when it was trying to share contacts. Once I set the phone to deny contact sharing and set up a separate phone book in the deck, it connects perfectly and never drops.
It's not a perfect solution if you want your whole address book access accessible from the car however.
Sent from my SAMSUNG-SGH-I897 using XDA App
SaintJohnShawn said:
I'm having the same issue with stock 2.2.
I found a quicker method to fix it.
I downloaded a Bluetooth widget that toggles Bluetooth on and off - this seems to reconnect with my Jeep after the toggle:
com.curvefish.widgets.bluetoothonoff
I'm sure there are a ton of widgets out there; but, you may want to give that a try!
Thanks,
Shawn
Click to expand...
Click to collapse
I use tasker for this. I have a task setup that as soon as I turn my car off and BT disconnects, toggle BT off and back on. I noticed that as long as BT is toggled off and back on, it will connect and hold it the next time I use it.
although, I have since turned that task off because GB roms seemed to have fixed the BT issues with my car. I rarely have this problem since switching to gingerbread.
Captivate stock 2.2 intermittent bluetooth problems
I have a stock Captivate with 2.2 android and I'm using a Motorola S10-HD headset to listen to music while I'm at work.
The bluetooth will randomly disconnect causing the music to pause. Sometimes it will reconnect on it's own several seconds later and I am able to continue listening by clicking the play button on the headset. If it doesn't reconnect on it's own then I have to turn off bluetooth on the phone and turn it back on. This will cause it to reconnect but the problem may occur again.
I have switched to listening to music on my Galaxy Tab 10.1 and haven't had any problems so it must be the phone.
Is there anything that will correct the problem?
Is this a defect with my phone or just a design problem with all Captivate phones?
Hi,
I bought a Bluetooth Car Stereo. I've paired it and it pairs fine. When I connect it, it works great and IF I leave BT permanently on, it automatically connects when I sit in the car. If I disable bluetooth to conserve battery, upon re-enabling it, it DOES NOT automatically connect. Instead, I have to go Settings, Wireless, Bluetooth and press Connect manually.
Is there no way of making my phone automatically scan or check or whatever? I'm pretty sure my old Nokia could connect automatically, in fact I'll test now!
Thanks,
Joe
Anyone? Perhaps an app you can recommend?
Bluetooth Autoconnect (by WestOneTech) ... but it's not free ...
Okay. I flashed MIUI MintBerry Edition, and guess what? It allows automatic reconnecting on bluetooth enable. So I know for a fact this isn't some android limitation and it's definitely a setting or config of some sort in SGS firmware.
There has to be a way in which this can be fixed on a stock rooted ROM.
Any help would be smashing!
That happens to me with my samsung gt-s5560 witch is a rather crappy phone. I need to manually tell the phone to connect with my car, even if it's paired and set to auto permit.
On my SGS with ICS EliteRom 1.2, however, it works perfectly. Connects automatically whenever i have bluetooth on (either if it was on before being in range or if i connect while i'm in range).
Bluetooth works as handsfree for calls - from the car interface the phone allows to take and place calls, browse through recent and lost calls, phonebook (it even downloads it) and it even streams music to my car's speakers (using Google Music) with no additional configs.
It connects rather fast, like 3 or 4 seconds after turning BT on.
Exactly Kayn and that is why I can't understand why the stock room doesn't do this and more to the point why nobody has raised this issue before. I like the stock ROM. I genuinely do. I find it intuitive. So why can't it automatically connect to my car stereo when Bluetooth is switched on. This custom ROM has no problem doing it. I simply switch on Bluetooth and boom it connects. I need that functionality on the stock ROM if possible
Im going to flash the newest value pack tomorrow and see if that helps but I doubt it will. I genuinely believe this is an issue with the stock ROM. The only thing that might have caused it if the stock ROM does support it, is if I've removed something using TiBa but I very much doubt it. I didn't touch any core system components.
Haven't flashed the latest value pack but I've worked out how to make it work. Ridiculous on Samsungs part and I think they need to get their heads out of their arses and sort it.
If I activate Bluetooth before I turn on my car stereo, then it picks it up perfectly.
So if I turn on my car stereo and then switch on bluetooth... doesn't work.
If I turn on bluetooth then switch on my car stereo... works fine.
Absolute joke on Samsungs part that this glitch is the only way I can get it to work. I'll keep investigating and I'll eventually write a guide to help people with it.
skezza said:
Haven't flashed the latest value pack but I've worked out how to make it work. Ridiculous on Samsungs part and I think they need to get their heads out of their arses and sort it.
If I activate Bluetooth before I turn on my car stereo, then it picks it up perfectly.
So if I turn on my car stereo and then switch on bluetooth... doesn't work.
If I turn on bluetooth then switch on my car stereo... works fine.
Absolute joke on Samsungs part that this glitch is the only way I can get it to work. I'll keep investigating and I'll eventually write a guide to help people with it.
Click to expand...
Click to collapse
Makes us both but i can't really cope with the battery drainage when the phone's plugged during several hours (i use loads of battery intensive like torrent-downloading apps, radio streaming, etc and the phone needs to be plugged) so i had to make the change for some custom non-samsung based rom.
Samsung has loads of this minor quirks that make the experience that much less enjoyable. I only found solution in custom roms (very thankful to the devs for that!). Don't think they ever really cared about solving some under-the-hood issues (they did add some new features though) and even went as far as to pull the "flawed by design" apple-move.
I would still tell you to give a shot at customs, some out there are really good, but i can understand not wanting to change something we really like.
Good luck with that mate!
It's not that I don't like custom ROMs, I love custom ROMs but unfortunately, none of them have the Samsung Browser and let's be honest, everyone knows the best Android browser is the stock Samsung one. The browser that came with MIUI was very choppy and laggy.
I get decent battery life out of my stock ROM, but if I had to leave BT on permanently this would go down a lot! I suppose i just need to remember that as I get into my car, turn on BT and it'll connect first time.
Just crap that other Custom ROMs can search on enable and connect. Worst still, I can't believe we're the only ones who have this issue.
I never thought samsung browser was something that good, i hardly even see it being mentioned. I never really used it much since i have not used sammy's roms since ginger bread came out, but have you tried opera mobile? This is, by far, the best browser I've used, it's not even fair to compare - it's on a totally different league. I was actually losing hope of decent browsing (tried just about anything) on Android until i came across opera. Needs to be the mobile and not the mini. Faith in Android browsing restored
if you haven't, give it a shot, free on market. If that's the main reason not to use a custom rom, you may be changing your mind soon
Sent from my GT-I9000 using xda premium
I am having just the opposite issue, I have a bluetooth headset that auto connects every time it's in range if I want it to or not, I'm running a stock rooted room kitkat on an old Nexus 7