Related
Big problem. Suddenly my phone will not turn on. Sits at the white Galaxy S GT-I9000 screen and does not boot. When I put it into download mode and plug it into computer, its suddenly saying "USB Device Not Recognized".
What do I do? PC won't recognize it, it wont boot. can't flash it.....I'm freaking out here...
Did you flash anything to it or root it?
riwarren said:
Big problem. Suddenly my phone will not turn on. Sits at the white Galaxy S GT-I9000 screen and does not boot. When I put it into download mode and plug it into computer, its suddenly saying "USB Device Not Recognized".
What do I do? PC won't recognize it, it wont boot. can't flash it.....I'm freaking out here...
Click to expand...
Click to collapse
Hi Rick. Try to re-install samsung usb drivers. during this time, take out the battery from the phone. once finished installing the drivers, put back the battery into the phone. Go into downloading mode. Fire up odin, put in the necessary firmwares + pit files. Once done, then CONNECT your phone to the usb port of your computer.
Hope it's okay.
Edit: Let's hope that it is the computer usb drivers are corrupted. Alterntively, if you still can't do it, try it on another pc.
Nope. I was rebooting it to flash XXJPC to it, but couldnt do so because it was saying that USB message and wouldnt detect it. So I went into recovery, did a factory reset, and now it wont boot.
Another computer does the same thing *tears*
*BUMP*
Lets try a different route. I will pay a generous sum of money to anyone who offers to and does manage to fix this for me?
rick, looking at this, if your usb is not recognised, it is either the pc or the phone usb port might be damaged.
if it is a hardware issue, then use the bounty to get it fix.
I was at that same point with my vibrant. After failed attempts of getting into download mode using buttons, here's what I did.
Download and install samsung usb drivers and android sdk.
Plug into the computer and use adb to get into download mode (adb reboot download).
Then flash with odin.
Doing that worked for me when nothing else would. Try it ?
Sent from my SGH-T959 using XDA App
richan90 said:
I was at that same point with my vibrant. After failed attempts of getting into download mode using buttons, here's what I did.
Download and install samsung usb drivers and android sdk.
Plug into the computer and use adb to get into download mode (adb reboot download).
Then flash with odin.
Doing that worked for me when nothing else would. Try it ?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I can get into download mode just fine.....my pc just doesnt recognize the usb device. tried 3 differente pc's, 2 running win7 and one running xp.
Did you install usb drivers on each of the machines?
Sent from my GT-I9000 using Tapatalk
I installed the samsung USB driver executable. and I also tried to use those drivers that it installs to manually update the "unknown USB device" in device manager, but they won't take.
Try uninstalling all drivers, then stick a MicroSD in your phone before plugging it into the usb.
Assuming you have Samsung Kies in your PC, try to upgrade it at 1.5.1.10074_45.
How long do you wait the boot?? The first boot after flash is very long, wait at least 5 minutes with flashing "S".
I did not just flash anything. My phone got really hot and laggy (as I was using it while charging it via USB port) and so I rebooted phone in an attempt to resolve the lag. when I did, it would not go past the WHITE Samsung Galaxy S I9000 screen, does not get to the flashing S screen.
bump
please anyone able to help?
riwarren said:
bump
please anyone able to help?
Click to expand...
Click to collapse
if i understood you correctly, you have two separate problems:
a) your phone does not boot up
b) your phone is not recognized by any computer when plugged in
could be a coincidence, but probably is not. i'm guessing your bootloader got screwed up somehow. if it is a coincidence, it could be that your usb port on the phone is effed, or your usb cable is dead. try first using a different cable and see if your phone can be recognized by any computer. perhaps then you can go into download mode and reflash.
also, have a look at this post, might help you (although, if your usb is effed, there's not much point in trying any solution that involves your phone being connected to a computer): http://androidforums.com/780720-post3.html
EDIT: also, have your tried the obvious stuff, like pulling battery?
I ve seen many threads with the white screen problem ... it has in most cases been the drivers ... you desinstall all drivers from pc using Kies option for resinstall the drivers ... then you pull the battery off few sec (give it a min or two) then you get to download mode and you flash the beast ... dont connect your phone before launching odin or else it will not be recognized ...
for the few other people who didn't manage to fix it ... it was a hardware failure
That post you linked, is worth a try. But its for a motorola.....Where do I get my SGS bootloader to use instead?
ohh you were implying to try to use the motorola usb drivers?
bouzoubaa said:
I ve seen many threads with the white screen problem ... it has in most cases been the drivers ... you desinstall all drivers from pc using Kies option for resinstall the drivers ... then you pull the battery off few sec (give it a min or two) then you get to download mode and you flash the beast ... dont connect your phone before launching odin or else it will not be recognized ...
for the few other people who didn't manage to fix it ... it was a hardware failure
Click to expand...
Click to collapse
I never said anything about a white screen. and I am not uneducated on flashing SGS, or using Odin. Far from it. My phone was first showing USB symbol when it wasnt plugged into USB port, then phone started running really hot while charging and got really bloated like it was overheating. So I rebooted and its now force closing at the first boot animation. I can get into download mode and recovery, but will not recognize in any of the 3 computers all running different versions of windows on them, with either of my USB cables that I tried.
I have Cognition V4.5.3
Im A Noob At This... Tried Ti Flash A Kernel With [APP] SGS Kernel FLasher
When I Rebooted My Phone Its Just Stuck At The Boot Screen...
Does Not Want To Go In Recovery Mode... Just Download Mode....
But Heimdall Does Not Recognize My Device...
What Can I Do? I Need To Get My Phone Back, Since Its A Gift
Thanks...
and i only have a mac... =/
wow thanks for the help... -_____-
its my only phone.... right now im without phone and NOBODY can tell me how to fix this... Really... Thanks
Try Odin 1 Click. You'll find it on here somewhere. It wil take you back to stock 2.1 Eclair. Then you can READ ABOUT flashing other ROMs and proceed from there.
bertito2580 said:
wow thanks for the help... -_____-
its my only phone.... right now im without phone and NOBODY can tell me how to fix this... Really... Thanks
Click to expand...
Click to collapse
im sorry but most of us can't even help you IF we want to The users of windows based PC's are greater in this forums compared to Macs. if there is drivers for mac, are they installed?
Since you only have a Mac, I would suggest installing Windows through Boot-Camp (included in Mac OSX) on a different partition. I read Galaxy S doesn't have drivers support for Mac OSX Leopart or later, not entirely sure if its true though, but I do have a MacBook Pro and had no success in finding a way to connect my phone to it by USB... Good thing I had a regular old Windows PC Desktop.
Then as Jack Man said, use Odin 1-Click found here
http://forum.xda-developers.com/showthread.php?t=731989
to reset your phone completely to factory settings, relatively simple to do as long as you read the instructions on that post. =)
Well since you only have a Mac and hiemidal is not see your phone i think your only option is to find a friend with a PC and give the Odin 1 click a try.
i ask my aunt for her pc,
Windows Vista 32-Bit
Downloaded And Installed The Drivers
Using Odin3 One-Click
I Put My Phone On Download Mode With The 3keyCombo
And The PC Says"USB Device Not Recognized"
Im Just Gettind Pissed And Stressed
It's My Only Phone.
What Can I Do To Fix This?
Also Tried Running Odin As Administrator... And NOthing...
bertito2580 said:
Also Tried Running Odin As Administrator... And NOthing...
Click to expand...
Click to collapse
Sir, just in case, did you reboot after installing drivers and BEFORE you tried connecting the device? Also, did you check if Odin detected your device when its connected in Download mode?
yes, and thats what in trying to do, to get odin to detect my phone in download mode...
Ok, is your phone detected by the operating system? If it does, then try using this other Odin thread instead, this one however will restore it to Stock Samsung Galaxy with 2.3 Gingerbread.
http://forum.xda-developers.com/showthread.php?t=1127249
Don't have to follow the rest of the instructions to root it just in case, but see if that version of Odin detects your phone.
actually thats the problem... windows vista doesnt recognize my device, either my mac... is there a solution to my phone or not? please help
OMG please help ((
I've Installed Captivate Drivers
Also
Galaxy S General Drivers
But When I Put My Captivate On Download MOde It Just Says
"USB Device Not Recognized"
One of the devices attached to this computer has malfunctioned and
Windows does not recognize it.
Are you sure it goes in to Download Mode (little android with a shovel)? Also have u tried different usb ports?
Like the above said, are you sure you are in download mode?
What USB port are you using if ots a desktop computer. There are known issues using front usb, plug into the usb on the back of the tower.
Also, are you sure odin doesnt see it? I know windows doesnt like it, but start odin, put phone in download mode, connect to pc. What does odin show? Any connected devices?
Sent from my GT-I9000 using XDA App
yes, im sure its on download mode and tried all the ports...
Im gonna try on another pc
to see if its the pc
I have a Samsung Captivate and its running cyanogenmod 7. I notice the bad battery life so i want to flash back to stock. I usually use odin but with this rom odin is not recognizing the phone. I put my phone in download mode and gadget serial pops up at the bottom and thats it. Now my phone isnt getting past the att logo. idk what to do for odin to recognize my phone. I have all the captivate drivers. Does it has something to do that my phone thinks its a nexsus S now.
PLEASE HELP
Yes your missing the correct drivers. Check for AOSP or Google usb drivers. CM7 is not based on the SGH-i897 so the drivers wont recognize your phone.
where can i find that. i think i did all of that. today i downloaded android sdk and something google revision 4.some site told me to do that but nothing working. my phone is stuck at the att logo, wont go in recovery, and odin wnt recognize the phone in download mode. idk what to do !
ballkidray said:
where can i find that. i think i did all of that. today i downloaded android sdk and something google revision 4.some site told me to do that but nothing working. my phone is stuck at the att logo, wont go in recovery, and odin wnt recognize the phone in download mode. idk what to do !
Click to expand...
Click to collapse
First, uninstall all the captivate-related USB drivers you currently have installed (best to start clean), and reboot your computer.
Then, try doing the instructions on this page. Once you have those drivers installed, reboot your computer and then hook your phone up again. That should (in theory) get you going.
my phone only going in download mode. i tried all that. every time i connect the phone in download mode it says gadget serial
jmtheiss said:
First, uninstall all the captivate-related USB drivers you currently have installed (best to start clean), and reboot your computer.
Then, try doing the instructions on this page. Once you have those drivers installed, reboot your computer and then hook your phone up again. That should (in theory) get you going.
Click to expand...
Click to collapse
Just install SDK and you will have the drivers. CM7 is based of Nexus S, SKD has those drivers.
then ill be able to use odin ?
I think I have the same problem now..Odin not recognizing my phone..
Tried different cables and different computers with no luck..
Did you guys find a way to fix it?
Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)
Try to reinstall or install a usb driver from samsung
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!
yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon
Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?
Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000
GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000
odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks
My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.
BUMP
Any solution to this given the fact that usb drivers have been installed?
Are you sure it is recognised by the computer before trying Odin or Heimdall?
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!
help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???
i did the same thing with my tab exactly like yours plzzzz help me recover it
i have windows 7 and a samsung captivaye flashed with heimdall 2.3.4 gingerbread. i want to flash 2.3.5 with clockwork mod and can only find one that comes with a odin one click. my problem is the comuter recognizes the phone heimdall does too but no version of odin will. any ideas on how to get odin to see my phone. and yes im in download mode
my computer is running windows 7 and i have a samsung captivate. my computer recognizes my phone, hemdall recognizes my phone but no version of Odin will. i am running 2.3.4 gingerbread flashed with heimdall but i want to flash it with 2.3.5 with clockwork mod which the only version i could find came in a odin one click package. any ideas on how to get odin to recognize my phone???
and yes i ran odin as admin still no go
Reinstall your drivers. After installing the Heimdall driver, your driver that you need for Odin is borked.
i have reinstalled the phone drivers many times. i eaven downloaded them from samsung and tried that that. when i plug my phone in the computer will say installing drivers then it says completed. i restarted computer right click odin run as admin but nothing shows up in the com box..
Look here
http://forum.xda-developers.com/showthread.php?t=1351224
For more help
can i unplug the phones usb cable from the pc while it is in download mode? i do not want to brick the phone
also is there a way to get out of download mode with out flashing the rom
got it. i let kies mini install drivers for phone then once kies mini found the phone so to did odin
oh and just help someone else who may be having these issues. yes you can unplug the phone as long as its not already flashing a rom. never unplug if already in the middle of flashing or you will brick the phone. to get out of download mode if you are not in the middle of a flash. if you find yourself like me and have put the phone in download mode and odin or whatever you are using will not recognize it or maybe you forgot to check usb debugging then unplug phone from computer remove battery for a few seconds and the phone should boot normally. tahnks guys for all the help i really appreciate it
I have an S4 Active that NO MATTER WHAT I DO, Odin will NOT see phone in Download mode, it will with the phone on, and my PC will see the phone, but not Odin. I am stumped. I have tried 3 PC's, I have ALL the drivers and then some. I am Stumped.
rekamyenom said:
I have an S4 Active that NO MATTER WHAT I DO, Odin will NOT see phone in Download mode, it will with the phone on, and my PC will see the phone, but not Odin. I am stumped. I have tried 3 PC's, I have ALL the drivers and then some. I am Stumped.
Click to expand...
Click to collapse
Are you using the cable that came with the phone?
Have you tried a different cable?
Do you have Debugging Mode turned on?
You might want to post in the S4 Active Q&A forum.: http://forum.xda-developers.com/galaxy-s4-active/help
dawgdoc said:
Are you using the cable that came with the phone?
Have you tried a different cable?
Do you have Debugging Mode turned on?
You might want to post in the S4 Active Q&A forum.: http://forum.xda-developers.com/galaxy-s4-active/help
Click to expand...
Click to collapse
Yes & yes
rekamyenom said:
Yes & yes
Click to expand...
Click to collapse
If you connect your phone to the PC and then go to the computer's Device Manager, is it recognizing the phone correctly? Or are you getting the yellow exclamation point over the icon?
I use Heimdall when doing Odin tasks. It is an Open Source equivalent to Odin available for Windows, Mac, and Linux. I'm not too familiar with Windows problems because I have been on Linux for the past 7 years. I have only used Windows in those years for updates to a Captivate that only worked through Kies, and rooting an Acer tablet with a Windows only tool.
dawgdoc said:
If you connect your phone to the PC and then go to the computer's Device Manager, is it recognizing the phone correctly? Or are you getting the yellow exclamation point over the icon?
I use Heimdall when doing Odin tasks. It is an Open Source equivalent to Odin available for Windows, Mac, and Linux. I'm not too familiar with Windows problems because I have been on Linux for the past 7 years. I have only used Windows in those years for updates to a Captivate that only worked through Kies, and rooting an Acer tablet with a Windows only tool.
Click to expand...
Click to collapse
I get nothing when I connect the phone to the PC in download mode, but I get full communication when not in download mode. I have never tried Hemidall
I have seen some suggestions to try a different USB port, I expect you already have.
Other thoughts:
What version of Odin are you using?
Have you tried Kies?
Is your phone stock or modified?
dawgdoc said:
I have seen some suggestions to try a different USB port, I expect you already have.
Other thoughts:
What version of Odin are you using?
Have you tried Kies?
Is your phone stock or modified?
Click to expand...
Click to collapse
I have tried numerous computers, numerous cables, numerous USB ports, I have tried every version of Odin known to mankind, I have tried with kies, without kies, and my phone is completely stock, not modified whatsoever, this one has me stumped. I have used odin on no less than 1000 phones never have I had a phone not react to Odin. the phone reacts 100% of the time to anything but Odin, I am wondering if Samsung has released a security update that is preventing communication with Odin
rekamyenom said:
I have tried numerous computers, numerous cables, numerous USB ports, I have tried every version of Odin known to mankind, I have tried with kies, without kies, and my phone is completely stock, not modified whatsoever, this one has me stumped. I have used odin on no less than 1000 phones never have I had a phone not react to Odin. the phone reacts 100% of the time to anything but Odin, I am wondering if Samsung has released a security update that is preventing communication with Odin
Click to expand...
Click to collapse
I'm at a loss, a quick search using the terms odin, download, and something else did not yield useful results. Raising your question over there may turnup someone who has experienced this, and hopefully resolved the issue.
dawgdoc said:
I'm at a loss, a quick search using the terms odin, download, and something else did not yield useful results. Raising your question over there may turnup someone who has experienced this, and hopefully resolved the issue.
Click to expand...
Click to collapse
UPDATE:
After trying 3 different computers (windows XP & windows 7 64 & 32 bit, with Kies installed and without Kies installed), 12 different USB Ports, and 10 different cables at my house to NO AVAIL, just for a goof went to a friends house to try his computer (Windows 7 64 bit with Kies 2.6 & 3 installed), put the phone in download mode, connected it to his computer, with a random cable, opened Odin, and BOOM it showed up right away. I DON'T GET IT !!! WTF !! I have used Odin on no less than 1000 phones on my home PC with NO Problems, I try to hook this phone up to 3 different computers at my house (2 laptops and a PC), and Odin WOULD NOT see this phone. I am Stumped!
Glad you got it to work. I hope you were able to accomplish what you needed while you were at your friends.
dawgdoc said:
Glad you got it to work. I hope you were able to accomplish what you needed while you were at your friends.
Click to expand...
Click to collapse
Yes, I was able to Root the device with Towelroot after reverting from 4.4.2 Build NH3 to 4.4.2 Build NE3, Now I just have to get this thing home to "Fix" the IMEI number. One must be rooted before being able to "Fix" the IMEI number. I wish Samsung would just cut the **** with these unnecessary updates.....
This is one for the books. Must have just been a finicky phone..... Didn't like my computers, cables, or something.