HEEELP !!! My Galaxy Tab freeze in Samsung logo !!!! - Galaxy Tab Q&A, Help & Troubleshooting

Please help me !!!!
My glxy Tab P1000 work fine !!!
I try to upgrad to 2.3.3 by using firmware P1000JPJPC, using odin 1.7
In the first, i use P1_EUR.pit and i use "Re-Partition" ( the flash process is aborted – fail !!!)
I retry by using "P1_add_hidden.pit and i use "Re-Partition" ( The flash process success – pass) the tab restart in recovery and show error !!! in restart the tab is freeze in glaxy logo !!!!
I try many firmware (differente region and version) an all "PIT" fliles the sam result !!! freeze !!!
I use ROTO-JME for p1000 and the same result !!!!!
I try to remove battry, and not any result !!!
Please help me !!!! i read may tuto in this forum and other and i use many solution, not result !!!!!
For information, the tab is put in download mode !!! (no problem)
HEEEEEEEEEELP !!!

I dont recommend P1000JPJPC because its beta version and has many bugs.
Use P1000JPJM5 then use KIES to update your CSC to P1000OJPJM8 (OFFICIAL).
Download .PIT :
http://www.multiupload.com/ZL9HDOGI5V
P1000JPJM5 :
http://hotfile.com/dl/109292691/6006995/P1000JPJM5.rar.html
1. In Odin select re-partition then in DOWNLOAD MODE install .PIT (P1.PIT only !)
Now your TAB will restart then you'll see SAMSUNG
2. Now goto DOWNLOAD MODE again and install PDA, PHONE & CSC file
(dont select re-partition this time).
DONE

hope you solve your problem buddy

omr911 said:
I dont recommend P1000JPJPC because its beta version and has many bugs.
Use P1000JPJM5 then use KIES to update your CSC to P1000OJPJM8 (OFFICIAL).
Download .PIT :
http://www.multiupload.com/ZL9HDOGI5V
P1000JPJM5 :
http://hotfile.com/dl/109292691/6006995/P1000JPJM5.rar.html
1. In Odin select re-partition then in DOWNLOAD MODE install .PIT (P1.PIT only !)
Now your TAB will restart then you'll see SAMSUNG
2. Now goto DOWNLOAD MODE again and install PDA, PHONE & CSC file
(dont select re-partition this time).
DONE
Click to expand...
Click to collapse
thanks for your reply, i already try this firrware, and i retry your method step by tep, the same probelem !!! the tab is freeze in galaxy logo !!!!
I do not understand !!!!

Did you wipe all things?
Which errors do you have in recovery mode?

dynamitor said:
thanks for your reply, i already try this firrware, and i retry your method step by tep, the same probelem !!! the tab is freeze in galaxy logo !!!!
I do not understand !!!!
Click to expand...
Click to collapse
Just install PDA, PHONE, CSC and leave .PIT then your TAB will reboot and freeze at SAMSUNG.
Just wait and don't do any thing it happens after flashing.
SAMSUNG logo takes time

gtUser1000 said:
Did you wipe all things?
Which errors do you have in recovery mode?
Click to expand...
Click to collapse
after flash firmware P1000JPJPC, thi error

Try installing Overcome ROM. It's one of the best.
Go here and follow the guide http://p1000.teamovercome.net/?page_id=64
The guide is very well done and easy to follow. Just make sure you don't skip anything. All the needed files are there.
Good luck and keep us posted how it went.
Sent from my GT-P1000 using XDA Premium App

did you edit a file or the zipfile?
May you have damaged the zip or the config file, it looks like it isnt linux conform anymore.
if you didnt change anything you should try to redownload it or use a rom like the overcome ones.

May i know if you are from a Froyo or Gingerbread? I guess you are from Froyo,and the problem at your bootloader and can follow the guide from overcome posted about,hope it helps

omr911 said:
Just install PDA, PHONE, CSC and leave .PIT then your TAB will reboot and freeze at SAMSUNG.
Just wait and don't do any thing it happens after flashing.
SAMSUNG logo takes time
Click to expand...
Click to collapse
I wait, wait and ait few hors !!! teh same problem !! freeze !!!

Did you solve your problem ?
Are you still able to go to Download Mode ?
It might be bootloader problem.
Try this http://forum.xda-developers.com/show....php?t=1205990
Good luck

ayong chia said:
May i know if you are from a Froyo or Gingerbread? I guess you are from Froyo,and the problem at your bootloader and can follow the guide from overcome posted about,hope it helps
Click to expand...
Click to collapse
I start from a Froyo, and i folow tuto from overcom step by step, the problem, is after restart !!! after download and flash "001001-GB-Stock-Safe-v5.zip" with "gt-p1000_mr.pit", the tabs show error in picture 01, no the same error show in tutorial from overcom !!!!
In overcom tuto, the install update is successfully !!! in my tab, the istall updte is aborted !!!! show the picture !!!!
After, the tab freeze in galxy tab logo !!!!!

tupo05 said:
Did you solve your problem ?
Are you still able to go to Download Mode ?
It might be bootloader problem.
Try this http://forum.xda-developers.com/show....php?t=1205990
Good luck
Click to expand...
Click to collapse
My tab go in download mod normaly !!!! and i folow the tutorial, the same problem, read my previouis post !!!

dynamitor said:
My tab go in download mod normaly !!!! and i folow the tutorial, the same problem, read my previouis post !!!
Click to expand...
Click to collapse
Hummm That's weird man. Are you sure you are following all the steps in the tuto ? Including the part about bootloader and some possible patch ? Because that could be the problem you are having. Just read the guide carefully please and try again.

thanks for your help my friends, i finaly repir my galaxy tab !!!
the solution :
i flash my tab with this firmware "P1000JPJPD_P1000OJPJPE_P1000JXJP4_HOME.tar.md5" and "gt-p1000_mr.pit"
aftern no error in recovery !!! and the tab start normaly !!! and after i try to reflash my phone with "001001-GB-Stock-Safe-v5.zip" for teste only !!! after no errore in recovery !!! I noticed the first firwmare are repair my tab !!!!
i find this stock firm in this thread :
http://forum.xda-developers.com/showthread.php?p=18410689
and link for this firmare is :
http://www.multiupload.com/IVKH1NMW7C
and I hope that my experiences and your posts will help others!

Glad to hear that you are up and running dude.
Sent from my GT-P1000 using XDA Premium App

Related

Please help, bricked??

Hello to all!
I think i just bricket a friends phone !!
I rooted the device (I9000) and installed CWM. All went fine.
I downloaded a rom and put it on the sd card.
Next i did a wipe, the fone rebootet and now i cant enter recovery (vol+,home,power) it hangs on the samsung logo.
I only can enter download mode with vol-
Please can anybody tell me if there is a way to flash back to stock with download mode or to reinstall recovery and flash custom rom??
Thanks in advance!
Solution to bricked
Download odin and a complete firmware with pda, csc and phone, enter in download mode flash those and your set.
mario7629 said:
Download odin and a complete firmware with pda, csc and phone, enter in download mode flash those and your set.
Click to expand...
Click to collapse
thnx mario i downloaded odin but when i try to attach a pda file it asks for a tar file? what kind of file is this and where to get it??
tnx m8!
Get firmwares from here hotfile(dot)com/dl/140323899/f4c447a/I9000XXJVU.rar.html
Replace "(dot)" with "."
It is latest version I9000XXJVU!!
Password sampro.pl..
Hope u un-brick it!
arindam4u said:
Get firmwares from here hotfile(dot)com/dl/140323899/f4c447a/I9000XXJVU.rar.html
Replace "(dot)" with "."
It is latest version I9000XXJVU!!
Password sampro.pl..
Hope u un-brick it!
Click to expand...
Click to collapse
downloading...hope so to mate!
will give an update after trying...(half hour)
now i have downloaded 3 files
CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar
GT-I9000-CSC-MULTI-OXAJVU.tar
MODEM_I9000XXJVU_REV_00_CL1092175.tar
modem makes sense
wich of the other fies is phone ?? is it the first? second there is crc
i would realy like to thank you guys!!
looks like this did the trick!
phone is booting now!
tn alot guys...
will try the proces of rooting agian now! hopefully i can install a custom rom this time
keep this for next soft brick lol
http://www.youtube.com/watch?v=1RoZU5ZPMS4
http://androidadvices(dot)com/info/samsung/galaxy-s-i9000/.............. try to install from here....... u will have a complete guide
Sector51 said:
i would realy like to thank you guys!!
looks like this did the trick!
phone is booting now!
tn alot guys...
will try the proces of rooting agian now! hopefully i can install a custom rom this time
Click to expand...
Click to collapse
Glad u made it....
Now u have the firmware so u can now play with ur Rom... without any fear!!
Sent from my GT-S5360 using xda premium

[Q] Help- Gt-n7000 freez odin

hello. first want to apologize for the English they speak. is translated by google ...
I have a gt-N7000 phone that crashes in Odin to factoryfs.img i don't know what i need to make
I tried to make some updates by revovery mode and now I can not do anything ... Can you help me please ? I have some pictures
N7000XXLA1_N7000OXALA1_OXA
odin 3 v1.85
Reflesh with pitfile, at own risk. Get it from Dr Ketans thread in sticky section development
By any chance did you wipe or factory reset when on ICS?
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
Reflesh with pitfile, at own risk. Get it from Dr Ketans thread in sticky section development
By any chance did you wipe or factory reset when on ICS?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
yes i make wipe / recovery mode on ics...
Try flashing the KL3 base....it always works for me...
Rulinglionadi said:
Try flashing the KL3 base....it always works for me...
Click to expand...
Click to collapse
i try now 10x. i hope it`s work... i come back
not work still freez... !
I think I have problems with nand flash
I try to put a firmware from the 8xx MB (GB stock) freezes over. see de photo.
I try to put one of 9xx MB ( ICS stock ) freezes last two green lines.
soryy for my english ...!
Did you make "USB Debugging" on
dsmas said:
Did you make "USB Debugging" on
Click to expand...
Click to collapse
yes but right now the software is down... i try 3 different firmware stock flash with odin and nothig but I managed to get into recovery mode and when I wipe or update or else I try, crashes and resets I did try diferren phase with pit files, i try reset all with JIG ( homemade by me and working) ... i think i need one small rom 500 mb other something like that
Do a factory reset....with cmw...or remove your battery once...and then try the kl3 base...and run Odin in Administrator mode....select the base from in PDA....and pray tat it works
Rulinglionadi said:
Do a factory reset....with cmw...or remove your battery once...and then try the kl3 base...and run Odin in Administrator mode....select the base from in PDA....and pray tat it works
Click to expand...
Click to collapse
NOT WORKS..... any ideea ?
danieldumitru said:
NOT WORKS..... any ideea ?
Click to expand...
Click to collapse
Yours looks like already damage some partitions due to the EMMC bug, wiping under ICS buggy kernel.
So you should look for help from warranty service if you can. Or do repartition using custom PIT file or manual method, although will loose some space of sdcard. The guide is in the thread below:
http://forum.xda-developers.com/showthread.php?t=1661590
Hope it helps.
forest1971 said:
Yours looks like already damage some partitions due to the EMMC bug, wiping under ICS buggy kernel.
So you should look for help from warranty service if you can. Or do repartition using custom PIT file or manual method, although will loose some space of sdcard. The guide is in the thread below:
http://forum.xda-developers.com/showthread.php?t=1661590
Hope it helps.
Click to expand...
Click to collapse
YES i think this is my problem now i try to fix .... THANK YOU so much for help !!
Hope it work out well for you. cheers.
forest1971 said:
Hope it work out well for you. cheers.
Click to expand...
Click to collapse
not work 100 % :
1. i try to repartition and its ok but when i flash 4pda_kelner i have the triangle yellow. ok... in recovery mode i make wipe data cache system, i install zip KingDroid_ICS_NoteMania_Edition_v3.0.zip OK. when is i make restart phone and when is loading the software ( bootlogo ) automaticaly is restart and still freez samsung logo with triangle yellow ...
2. I found the solution to make it disappear triangle count in binary mode download is no .... but when I install file 2 ZSLPF recovery is a version that can not install any version of firmware in recovery mode (install sdcard zip file ..bla bla ) ...
all I need is help me with some versions of good kelner that I can manage to install the firmware in recovery mode ...
I want to mention is that when trying to install file or 2.tar 1.tar ITS Odin stuck to spl files
sorry for my english please be patient
You can install custom roms which is packed in .zip format as suggested in the guide. If one rom not wirk, try a secobd one. See how it goes. Btw, it always useful if you post partition table so we can see if it looks right.
About kernel. Should use abyssnote, search in the forum you will find it.
danieldumitru said:
hello. first want to apologize for the English they speak. is translated by google ...
I have a gt-N7000 phone that crashes in Odin to factoryfs.img i don't know what i need to make
I tried to make some updates by revovery mode and now I can not do anything ... Can you help me please ? I have some pictures
N7000XXLA1_N7000OXALA1_OXA
odin 3 v1.85
Click to expand...
Click to collapse
You can send this file along with any other pit stock rom of your choice aconcelho use LPY
PIT:
http://www.mediafire.com/?x5lkvtwg5s1j4ov
kleidione said:
You can send this file along with any other pit stock rom of your choice aconcelho use LPY
PIT:
http://www.mediafire.com/?x5lkvtwg5s1j4ov
Click to expand...
Click to collapse
If possible you should give the source where the PIT file is from. If it is custom PIT file from hg42 you should mention it, or from someone or you made it? Using a blind PIT file is dangerous and can lead to hard-brick.

Help...Need to go back on stock rom

Guys I rooted my galaxy ace and installed cyanogenmod after making a backup of stock rom in clockworkmod v.5xx... now I wish to go back on my stock rom.. so I wiped everything in clockworkmod and restored the backup of stock rom... restoring was successful but when I rebooted the phone, it stucks on samsung galaxy ace s5830 screen and doesn't go any further from there... I gave it 20mins but nthn happens n it doesn't go further from that screen... so plz help n tell me what to do ? It would be great if any1 can provide me like of flashable stock rom of galaxy ace which I could flash in clockworkmod... plz help guys.
Sent from using xda premium
stock roms are not flashable via cwm ...u need odin
boot into download mode and flash a stock rom via odin..
King ACE said:
boot into download mode and flash a stock rom via odin..
Click to expand...
Click to collapse
Thanks for replying... but can u plz tell me that how to go in download mode in the phone ?? Plus it would be great if u could provide me download links of odin n stock rom of galaxy ace ?? Am a newbie :-\
Sent from my HTC Wildfire using xda premium
download mode can be done by pressing Middle Key(HOME Key) + Power key and Volume Down Key .
Here is what you will need:
1. You might already have USB drivers for you Ace if you have Kies installed. If not, download manually from here.
2. Download Odin Multi Downloader v4.38 (Imp.- version no. is important) and the cooper_v1.0.ops file from http://www.mediafire.com/?lga31u288f6nvu2
3. Now download a firmware of your choice from samfirmware.com.
link for latest india baseband firmwre :- http://www.hotfile.com/dl/148986856/f274ebd/S5830DDKQ8_S5830ODDKQ7_INU.zip.html
4. Make sure you have the phone’s battery charged to at least 40-50%.
Now that you have everything now you need to go and set Odin.
1. On ODIN select the OPS button and load the Cooper_v1.0.ops file unto it. Ensure that the Auto-Reboot, Protect OPS and Reset Time is checked.
2. Unzip the firmware .Zip file in a folder If you get have the contents in .TAR (or .tar.md5), Check “One Package” option on the left side & skip PDA, Phone, CSC, BOOT options & directly go to ‘One Package’ option. Browse for the .tar (or .tar.md5) file & select it
3.enter into dwld mode
4.click on start
the whole process wud take arnd 5 mins.if it bootloops on restarting.enter into recovery(home + power button) n erase caches.
As its filesystem conflict you just need to flash cf-root to boot your backup...seriously ppl reply with extreme final solutions
Sent from Galaxy Ace which just landed on "MOON"
Nakulkhanna said:
Guys I rooted my galaxy ace and installed cyanogenmod after making a backup of stock rom in clockworkmod v.5xx... now I wish to go back on my stock rom.. so I wiped everything in clockworkmod and restored the backup of stock rom... restoring was successful but when I rebooted the phone, it stucks on samsung galaxy ace s5830 screen and doesn't go any further from there... I gave it 20mins but nthn happens n it doesn't go further from that screen... so plz help n tell me what to do ? It would be great if any1 can provide me like of flashable stock rom of galaxy ace which I could flash in clockworkmod... plz help guys.
Sent from using xda premium
Click to expand...
Click to collapse
download firmware your handphone in samfirmware.com
and flash via odin download on samfirmware too
madman said:
As its filesystem conflict you just need to flash cf-root to boot your backup...seriously ppl reply with extreme final solutions
Sent from Galaxy Ace which just landed on "MOON"
Click to expand...
Click to collapse
What's cf-root ?? N where can I find ?? And in which order should do this ?
Sent from using xda premium
Nakulkhanna said:
What's cf-root ?? N where can I find ?? And in which order should do this ?
Sent from using xda premium
Click to expand...
Click to collapse
CF-ROOT is a custom kernel made by ketut.kumajaya ......flash it via cwm recovery
kidoman said:
download mode can be done by pressing Middle Key(HOME Key) + Power key and Volume Down Key .
Here is what you will need:
1. You might already have USB drivers for you Ace if you have Kies installed. If not, download manually from here.
2. Download Odin Multi Downloader v4.38 (Imp.- version no. is important) and the cooper_v1.0.ops file from http://www.mediafire.com/?lga31u288f6nvu2
3. Now download a firmware of your choice from samfirmware.com.
link for latest india baseband firmwre :- http://www.hotfile.com/dl/148986856/f274ebd/S5830DDKQ8_S5830ODDKQ7_INU.zip.html
4. Make sure you have the phone’s battery charged to at least 40-50%.
Now that you have everything now you need to go and set Odin.
1. On ODIN select the OPS button and load the Cooper_v1.0.ops file unto it. Ensure that the Auto-Reboot, Protect OPS and Reset Time is checked.
2. Unzip the firmware .Zip file in a folder If you get have the contents in .TAR (or .tar.md5), Check “One Package” option on the left side & skip PDA, Phone, CSC, BOOT options & directly go to ‘One Package’ option. Browse for the .tar (or .tar.md5) file & select it
3.enter into dwld mode
4.click on start
the whole process wud take arnd 5 mins.if it bootloops on restarting.enter into recovery(home + power button) n erase caches.
Click to expand...
Click to collapse
hey brother i have 2 questions... so plz reply...
1) i dont have kies installed but when i connect my ace through data cable... it does gets detected n i can even transfer files n stuff in mass storage mode.. so do i still need to download USB drivers?? if yes then from where???
2) i have cyanogenmod isntalled currently, so before starting this process do i wipe everything in clockworkmod, like we do before installing a new rom?? or i just start this process by going in download mode over the cyanogenmod ??
plz reply asap. thanks
deleted...
hey guys one more thing... i just downloaded the .Rar file for .ops file n odin setup in it... named "Flashprogram Samsung S5830 + Ops.rar" from samfirmware, but the file is password protected.. means i cant extract anything coz it asks for password... now plzz help me and tell me a solution or the password.. plzz help guys.
password should be sammobile or samfirmware..
King ACE said:
password should be sammobile or samfirmware..
Click to expand...
Click to collapse
hey thanks a lot brother... it worked...
and i have 2 questions... so plz reply...
1) i dont have kies installed but when i connect my ace through data cable... it does gets detected n i can even transfer files n stuff in mass storage mode.. so do i still need to download USB drivers?? if yes then from where???
2) i have cyanogenmod isntalled currently, so before starting this process do i wipe everything in clockworkmod, like we do before installing a new rom?? or i just start this process by going in download mode over the cyanogenmod ??
plz reply asap. thanks
Nakulkhanna said:
hey thanks a lot brother... it worked...
and i have 2 questions... so plz reply...
1) i dont have kies installed but when i connect my ace through data cable... it does gets detected n i can even transfer files n stuff in mass storage mode.. so do i still need to download USB drivers?? if yes then from where???
2) i have cyanogenmod isntalled currently, so before starting this process do i wipe everything in clockworkmod, like we do before installing a new rom?? or i just start this process by going in download mode over the cyanogenmod ??
plz reply asap. thanks
Click to expand...
Click to collapse
Yes u do need to install drivers or else USB mass storage wont work and your phone wont connect to your pc..google them..
Yep..just boot into download mode and start odin...though wiping data should be done just in case...
before doing all those things you should have atleast taken care of going back to stock.. i am pretty damn sure that google will give you a complete noob guide to use and flash ROMS with ODIN on atleast 100 sites.. i am sure you can use google atleast ?
Complete soution :d [100%]
Nakulkhanna said:
Guys I rooted my galaxy ace and installed cyanogenmod after making a backup of stock rom in clockworkmod v.5xx... now I wish to go back on my stock rom.. so I wiped everything in clockworkmod and restored the backup of stock rom... restoring was successful but when I rebooted the phone, it stucks on samsung galaxy ace s5830 screen and doesn't go any further from there... I gave it 20mins but nthn happens n it doesn't go further from that screen... so plz help n tell me what to do ? It would be great if any1 can provide me like of flashable stock rom of galaxy ace which I could flash in clockworkmod... plz help guys.
Sent from using xda premium
Click to expand...
Click to collapse
Hey.
I made a guide to restore stock rom from your nandroid backup, this will surely help you: http://forum.xda-developers.com/showthread.php?t=1606336
Im going to try this. Thanks!
(DELETED)
Help !!!
Please respond if possible.
I have a rom based on CM 7.2, where the system ext4, Data ext4 and cache to ext4, and I want to go back to the stock rom gingerbread 2.3.3 via Odin 4.38. Do I have previously converted to the RFS or they can just install it over the original rom.
I've tried all over this tutorial but after I Odin says he managed to install the phone reboots and the samsung logo and spins it repeatedly.
Help.
Thanks for your reply.

Problem my phone is stuck on download mode.

I tried rooting with the chainfire auto root thing and after the red android screen i got the green one again and its stuck,i tried taking out the battery a few times but its still not working.
Any help would be amazing.
Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full
JJEgan said:
Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full
Click to expand...
Click to collapse
I did and didnt find anything helpfull for my situation.
Also tried to root again but again its stuck on downloading... do not turn off target screen.
Boot to download mode and it says as it should Downloading do not turn off .
You are now supposed to flash the firmware via odin .
You should flash your stock firmware to get the phone working .
Then read the basic faqs and guides before you flash anything as its pointless flashing without reading the basics .
Or take it to a service centre .
jje
Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
grpl said:
Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck
grpl said:
thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
read the basics ignorance is no excuse .
ashraf sharif said:
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck
Click to expand...
Click to collapse
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent
grpl said:
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent
Click to expand...
Click to collapse
Is there a way to know my version/pda since i have no idea what stock rom to download
Device model no. in recovery mode
Hi,
Sorry to ask a random question. I Have my device model no. as S3 I9305 when I go to download mode and in my phone settings I can see my device model as S3 I9305T. I have recently installed Australian official firmware(XSA version without any career bloatware) in my phone, which is the S3 I9305T. I found it weird to have two different model nos. in 2 different places. When I first bought this phone it was the Telstra version, which is S3 I9305T. After that I changed many firmwares and installed S3 I9305 version from optus and other country's S3 I9305 version as well. Could you please tell me why is that?? Is this because I once installed I9305 firmware once? If that's the reason, today I flashed I9305T official firmware again with Odin. Is there any way to reset the download mode as well?? Please reply. Thanks.
grpl said:
Is there a way to know my version/pda since i have no idea what stock rom to download
Click to expand...
Click to collapse
Not unless you know what it is or saved the original .
You can just pick a stock rom for your area/ network .
If you bothered to read the basics their would be no need for all this ratting about .
@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.
dogmatism said:
@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.
Click to expand...
Click to collapse
So you run odin in windows.
Boot your phone to download mode
Connect device and wait for confirmation of connection in odin.
And then you click pda and choose a stock firmware.
And click start.
@tissot Odin gives fail error as I stated before. Am going to try 3 part odin package ive downloaded,.

Big issue after firmware update try

Hello,
I've a "non commercial" version of a GTab 8.9.
This tab is running by default Android 3.1. I would like to update to Android 4.0.4. Kies doesn't want indicating my tablet doesn't support the update (i don't know it was 4.0.4 version or another)
I tried to use the standard : Odin + the new firmware. The tablet is unlocked and rooted.
Each time that I tried I get the error : "can't nand write" :-/ I tried all current stuff to fix this issue : change cable, PC, odin version (1.83, 1.85, 3.07, 3.09). I tried to change recovery with succss
but impossible to change rom. I found a link on tsar dot com (sorry I'm too young here to post link) to reformat tab and I put the pit file : this has worked....but now : i can't access to the recovery. I can only open the download mode...but I can't do anything and I don't have others files described ont the following link
XDA's guy are ones to save me !!
thanks by advance (sorry for my poor english)
arnouf said:
Hello,
I've a "non commercial" version of a GTab 8.9.
This tab is running by default Android 3.1. I would like to update to Android 4.0.4. Kies doesn't want indicating my tablet doesn't support the update (i don't know it was 4.0.4 version or another)
I tried to use the standard : Odin + the new firmware. The tablet is unlocked and rooted.
Each time that I tried I get the error : "can't nand write" :-/ I tried all current stuff to fix this issue : change cable, PC, odin version (1.83, 1.85, 3.07, 3.09). I tried to change recovery with succss
but impossible to change rom. I found a link on tsar dot com (sorry I'm too young here to post link) to reformat tab and I put the pit file : this has worked....but now : i can't access to the recovery. I can only open the download mode...but I can't do anything and I don't have others files described ont the following link
XDA's guy are ones to save me !!
thanks by advance (sorry for my poor english)
Click to expand...
Click to collapse
I didn't quite understand everything, but I'll provide you every link you need to fix this
and if I forgot something or you need anything, feel free to ask for
now here are links for some absolutely working files:
Samsung USB Driver For GT-P7300/GT-P7310 v1.5.5.0
Odin3 v1.85 For GT-P7300/GT-P7310
Samsung latest official GT-P7300 framework Tar for Odin
Samsung latest official GT-P7310 framework Tar for Odin
Samsung latest official GT-P7320 framework Tar for Odin
ClockworkMod Recovery v5.5.0.4 Odin Tar File For GT-P7300/GT-P7310
Team Win Recovery Project v2630 Odin Tar File For GT-P7300 & GT-P7310
all you have to do is to flash your tab's ROM [chose the link in regard of your tab's model number (p7300,p7310,p7320)]
and then flash your prefered recovery
omarainea said:
I didn't quite understand everything, but I'll provide you every link you need to fix this
and if I forgot something or you need anything, feel free to ask for
now here are links for some absolutely working files:
Samsung USB Driver For GT-P7300/GT-P7310 v1.5.5.0
Odin3 v1.85 For GT-P7300/GT-P7310
Samsung latest official GT-P7300 framework Tar for Odin
Samsung latest official GT-P7310 framework Tar for Odin
Samsung latest official GT-P7320 framework Tar for Odin
ClockworkMod Recovery v5.5.0.4 Odin Tar File For GT-P7300/GT-P7310
Team Win Recovery Project v2630 Odin Tar File For GT-P7300 & GT-P7310
all you have to do is to flash your tab's ROM [chose the link in regard of your tab's model number (p7300,p7310,p7320)]
and then flash your prefered recovery
Click to expand...
Click to collapse
Thanks for your reply. I tried this first but it didn't work because when I want "start" with the good firmware (7300), the md5 check works but that's all. When odin want write boot.img or other file, i get an error "Can't write" and odin stops.
As this method didn't work I try with the tsar dot com solution. Hoping that's can help me.
Thanks a lot.
arnouf said:
Thanks for your reply. I tried this first but it didn't work because when I want "start" with the good firmware (7300), the md5 check works but that's all. When odin want write boot.img or other file, i get an error "Can't write" and odin stops.
As this method didn't work I try with the tsar dot com solution. Hoping that's can help me.
Thanks a lot.
Click to expand...
Click to collapse
ok if this is the same file you tried, you should try to flash another one Previous official framework for P7300
omarainea said:
ok if this is the same file you tried, you should try to flash another one Previous official framework for P7300
Click to expand...
Click to collapse
Ok I'm going to try. But I think it's going to fail.... the reason is the Nand seems block or something like that.
I download file, test and I'll give you a feed back. Thanls for your help.
arnouf said:
Ok I'm going to try. But I think it's going to fail.... the reason is the Nand seems block or something like that.
I download file, test and I'll give you a feed back. Thanls for your help.
Click to expand...
Click to collapse
Or your nand is really broken
I've a similar issue in /data partition (it can't be writtable after a try to flash with Odin from a virtual machine) and I fixed it with the PIT file to repartition, reflash stock firmware and then a wipe/factory reset from stock recovery (I think it did a format)...
I try to put pit file. It's works as I told in my first post. But I can't flash the firmware with a standard stock rom (apparently). Can you tell me tools and roms that you used to fix the issue exaclty ?
arnouf said:
I try to put pit file. It's works as I told in my first post. But I can't flash the firmware with a standard stock rom (apparently). Can you tell me tools and roms that you used to fix the issue exaclty ?
Click to expand...
Click to collapse
I think the same as @omarainea have posted...
jolinnard said:
I think the same as @omarainea have posted...
Click to expand...
Click to collapse
Poor guy I am ! After a pit file download with heimdall...My tab doesn't start, screen is still off, and I don't have information in charge....brick, brick, brick...
arnouf said:
Poor guy I am ! After a pit file download with heimdall...My tab doesn't start, screen is still off, and I don't have information in charge....brick, brick, brick...
Click to expand...
Click to collapse
what did you do to break your device ??
omarainea said:
what did you do to break your device ??
Click to expand...
Click to collapse
I think that I use incorrectly the heimdall sofware when I want to load the pit file. Messages said all was ok, I unplug the USB cable. I would like to reboot the tab and...black screen, impossible to restart....complete black screen
arnouf said:
I think that I use incorrectly the heimdall sofware when I want to load the pit file. Messages said all was ok, I unplug the USB cable. I would like to reboot the tab and...black screen, impossible to restart....complete black screen
Click to expand...
Click to collapse
I'm not familiar with heimdall tool but I know that it should be used with Galaxy S devices:
What is Heimdall?
Heimdall is a cross-platform open-source tool suite used to flash ROMs onto Samsung Galaxy S devices.
Click to expand...
Click to collapse
anyway, so now you can't enter download mode or recovery ??
if that so, then you have officially break your device:silly:
and the most recommended solution is to take your tab to a near Samsung store
and they'll fix it for you
omarainea said:
I'm not familiar with heimdall tool but I know that it should be used with Galaxy S devices:
anyway, so now you can't enter download mode or recovery ??
if that so, then you have officially break your device:silly:
and the most recommended solution is to take your tab to a near Samsung store
and they'll fix it for you
Click to expand...
Click to collapse
Apparently some guys use heimdall with P7300...
Yes the tab is really broken now !
Thanks for helps given by each guy here ! Thanks a lot.
arnouf said:
Apparently some guys use heimdall with P7300...
Yes the tab is really broken now !
Thanks for helps given by each guy here ! Thanks a lot.
Click to expand...
Click to collapse
What I remember is Heimdall doesn't work with my P7310 and it don't let me do anything.
Anyway, plug into a Windows machine running Odin 1.85 (I think this version it's fine) your tab, press 10 seconds UP and power button and see if your tab is detected. In that case try to flash stock package again.
Some time ago it happened to me with a Galaxy Ace phone, when phone is booting screen was off but the phone enters into download mode anyway and you could flash whatever you want.
A last shot for you could be disassemble your tab and pull off battery. Wait some minutes and then pull on again. Try to start in download mode with tab plugged into your computer. If you don't have enough knowledge to disassemble your tab (and I can assure you of that it's not easy) maybe you need to bring it to Samsung support.
jolinnard said:
What I remember is Heimdall doesn't work with my P7310 and it don't let me do anything.
Anyway, plug into a Windows machine running Odin 1.85 (I think this version it's fine) your tab, press 10 seconds UP and power button and see if your tab is detected. In that case try to flash stock package again.
Some time ago it happened to me with a Galaxy Ace phone, when phone is booting screen was off but the phone enters into download mode anyway and you could flash whatever you want.
A last shot for you could be disassemble your tab and pull off battery. Wait some minutes and then pull on again. Try to start in download mode with tab plugged into your computer. If you don't have enough knowledge to disassemble your tab (and I can assure you of that it's not easy) maybe you need to bring it to Samsung support.
Click to expand...
Click to collapse
Heimdall works for our tablets. I use it for P7300, for example.
DemonGloom said:
Heimdall works for our tablets. I use it for P7300, for example.
Click to expand...
Click to collapse
Ok, so I don't know what could happen when I tried it, I think last time was in 2012 or maybe early 2013...

Categories

Resources