Database Develop

[Q] Help, phone stuck booting?!

I flashed darky's rom with the voodoo lag fix and then stupidly tried to flash over the top my recovery file. now its stuck loading. can't access recovery mode but can access download mode... any ideas?

Just posted this in another thread, with similar issues, try this, should fix it.
--------------------------------
HI,
Try the following, worked for me
1) Go into recovery mode and wipe both cache and partition data
2) go to samfirmware.com and download the original rom for your phone (the one that came with it)... since you don't say what region you're from, I'll give you an example with mine. Mine is from Bell, and factory comes with UGJH2, so i downloaded that with ODIN and the PIT FILE, make sure to extract the TAR file from inside the RAR file. Put all 3 files in the same folder
3) Enter download mode, when the phone is in that state sometimes it's hard to access download, best way is... remove the battery, put it back in, then hold VOL DN + HOME + POWER until you see a working android bot inside a triangle. When you see that, connect your phone to your PC, double click on ODIN, then load the PIT file (CHECK BOX RE-PARTITION leave the others to default) and Select PDA and find the TAR file you extracted in STEP 2... then click on START, it's gonna take a few mins, and even after it's done, it's going to reboot, and it'll stay at the "S" logo for a bit, leave it, then it'll boot.
At least we hope it will.
Keep us posted,
Thank you,
Rodi.
------------------------------------

Can't get into recovery mode only download mode?! I'm on orange uk custom galaxy S Rom 2.1 originally. shall i just follow your steps but use a stock samsung android firmware?
Thanks Alot btw!

Yeah keep going with the download mode, it's very possible that the recovery mode process is not even necessary, but since I have no way of testing, it's doesn't hurt to try.
so get the orig rom, with pit associated with its (u'll see in on sam firmware which pit you need, most likely 512 for stock out of the box).
Keep us posted
Rodi

Fixed!!! flashed the new 2.2.1 firmware as well. is flying thanks for the help

alcurtis93 said:
Fixed!!! flashed the new 2.2.1 firmware as well. is flying thanks for the help
Click to expand...
Click to collapse
i have the same problem as u ..which 2.2.1 firmware did u flash and where to download ?
Cris

Dont worry mate easier to fix than I thought. Go to samfirmwares and go to firmware section and galaxy s and its called I9000 jpu. If you need any more help dont be afraid to ask
Sent from my GT-I9000 using XDA App

Heres the link.... http://www.multiupload.com/PUSOOBQ8K5
Password is samfirmware.com
Sent from my GT-I9000 using XDA App

alcurtis93 said:
Heres the link.... http://www.multiupload.com/PUSOOBQ8K5
Password is samfirmware.com
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Thanks so u much

[Q] am i completely screwed?semi bricked sgs??

hi.thouh i am quite experienced user here.i have read everything possible.
now how i got this.here is the story.
i had sgs i 9000 version
android 2.3.3
jvk version
then i just rooted it using odin.fine.
use speedmod kernel for gingerbrid works firne.
then when i tried to go to that rooted stock kernel made by chainfire it rebbot then
here is story..
samsung boot scree looping again again.
i can enter in recovery mode and download mode,
tried nandroid restore but same happen.
plz help what to do to make it alive.
i know its not bricked bit i didnt worked either?//

Get into download mode and re-flash a stock 2.3.3 or a 2.3.4 rom with Odin and it should help fix the boot looping.

any stock firmware .i just downloaded this from forst link.
http://forum.xda-developers.com/showthread.php?t=1011901
will it work?

NO ONE??/my * is burning.i got very sow internet,

Yes any of those in that thread, Froyo or Gingerbread should get you sorted out.

i mean first one 2.3.4 jvq veersion in the given link bddy.is it okay?

should i tick re partion in odin or not with this 2.3.4 jvq version?

JVQ is fine.
If it's a 3 part firmware (separate phone,pda, csc), then 515 pit is required with repartition ticked.

hey thefirmware i download is just .exe file.one file what to do

Uploaded it for you.
Just unzip it then add it to Odin.
Double click it as it has to extract, which then will give you 3 files.

holdz said:
Uploaded it for you.
Just unzip it then add it to Odin.
Double click it as it has to extract, which then will give you 3 files.
Click to expand...
Click to collapse
Thanx a lot got my phone alive back

saurabh88 said:
Thanx a lot got my phone alive back
Click to expand...
Click to collapse
Awesome, glad I could help

HEEELP !!! My Galaxy Tab freeze in Samsung logo !!!!

Please help me !!!!
My glxy Tab P1000 work fine !!!
I try to upgrad to 2.3.3 by using firmware P1000JPJPC, using odin 1.7
In the first, i use P1_EUR.pit and i use "Re-Partition" ( the flash process is aborted – fail !!!)
I retry by using "P1_add_hidden.pit and i use "Re-Partition" ( The flash process success – pass) the tab restart in recovery and show error !!! in restart the tab is freeze in glaxy logo !!!!
I try many firmware (differente region and version) an all "PIT" fliles the sam result !!! freeze !!!
I use ROTO-JME for p1000 and the same result !!!!!
I try to remove battry, and not any result !!!
Please help me !!!! i read may tuto in this forum and other and i use many solution, not result !!!!!
For information, the tab is put in download mode !!! (no problem)
HEEEEEEEEEELP !!!

I dont recommend P1000JPJPC because its beta version and has many bugs.
Use P1000JPJM5 then use KIES to update your CSC to P1000OJPJM8 (OFFICIAL).
Download .PIT :
http://www.multiupload.com/ZL9HDOGI5V
P1000JPJM5 :
http://hotfile.com/dl/109292691/6006995/P1000JPJM5.rar.html
1. In Odin select re-partition then in DOWNLOAD MODE install .PIT (P1.PIT only !)
Now your TAB will restart then you'll see SAMSUNG
2. Now goto DOWNLOAD MODE again and install PDA, PHONE & CSC file
(dont select re-partition this time).
DONE

hope you solve your problem buddy

omr911 said:
I dont recommend P1000JPJPC because its beta version and has many bugs.
Use P1000JPJM5 then use KIES to update your CSC to P1000OJPJM8 (OFFICIAL).
Download .PIT :
http://www.multiupload.com/ZL9HDOGI5V
P1000JPJM5 :
http://hotfile.com/dl/109292691/6006995/P1000JPJM5.rar.html
1. In Odin select re-partition then in DOWNLOAD MODE install .PIT (P1.PIT only !)
Now your TAB will restart then you'll see SAMSUNG
2. Now goto DOWNLOAD MODE again and install PDA, PHONE & CSC file
(dont select re-partition this time).
DONE
Click to expand...
Click to collapse
thanks for your reply, i already try this firrware, and i retry your method step by tep, the same probelem !!! the tab is freeze in galaxy logo !!!!
I do not understand !!!!

Did you wipe all things?
Which errors do you have in recovery mode?

dynamitor said:
thanks for your reply, i already try this firrware, and i retry your method step by tep, the same probelem !!! the tab is freeze in galaxy logo !!!!
I do not understand !!!!
Click to expand...
Click to collapse
Just install PDA, PHONE, CSC and leave .PIT then your TAB will reboot and freeze at SAMSUNG.
Just wait and don't do any thing it happens after flashing.
SAMSUNG logo takes time

gtUser1000 said:
Did you wipe all things?
Which errors do you have in recovery mode?
Click to expand...
Click to collapse
after flash firmware P1000JPJPC, thi error

Try installing Overcome ROM. It's one of the best.
Go here and follow the guide http://p1000.teamovercome.net/?page_id=64
The guide is very well done and easy to follow. Just make sure you don't skip anything. All the needed files are there.
Good luck and keep us posted how it went.
Sent from my GT-P1000 using XDA Premium App

did you edit a file or the zipfile?
May you have damaged the zip or the config file, it looks like it isnt linux conform anymore.
if you didnt change anything you should try to redownload it or use a rom like the overcome ones.

May i know if you are from a Froyo or Gingerbread? I guess you are from Froyo,and the problem at your bootloader and can follow the guide from overcome posted about,hope it helps

omr911 said:
Just install PDA, PHONE, CSC and leave .PIT then your TAB will reboot and freeze at SAMSUNG.
Just wait and don't do any thing it happens after flashing.
SAMSUNG logo takes time
Click to expand...
Click to collapse
I wait, wait and ait few hors !!! teh same problem !! freeze !!!

Did you solve your problem ?
Are you still able to go to Download Mode ?
It might be bootloader problem.
Try this http://forum.xda-developers.com/show....php?t=1205990
Good luck

ayong chia said:
May i know if you are from a Froyo or Gingerbread? I guess you are from Froyo,and the problem at your bootloader and can follow the guide from overcome posted about,hope it helps
Click to expand...
Click to collapse
I start from a Froyo, and i folow tuto from overcom step by step, the problem, is after restart !!! after download and flash "001001-GB-Stock-Safe-v5.zip" with "gt-p1000_mr.pit", the tabs show error in picture 01, no the same error show in tutorial from overcom !!!!
In overcom tuto, the install update is successfully !!! in my tab, the istall updte is aborted !!!! show the picture !!!!
After, the tab freeze in galxy tab logo !!!!!

tupo05 said:
Did you solve your problem ?
Are you still able to go to Download Mode ?
It might be bootloader problem.
Try this http://forum.xda-developers.com/show....php?t=1205990
Good luck
Click to expand...
Click to collapse
My tab go in download mod normaly !!!! and i folow the tutorial, the same problem, read my previouis post !!!

dynamitor said:
My tab go in download mod normaly !!!! and i folow the tutorial, the same problem, read my previouis post !!!
Click to expand...
Click to collapse
Hummm That's weird man. Are you sure you are following all the steps in the tuto ? Including the part about bootloader and some possible patch ? Because that could be the problem you are having. Just read the guide carefully please and try again.

thanks for your help my friends, i finaly repir my galaxy tab !!!
the solution :
i flash my tab with this firmware "P1000JPJPD_P1000OJPJPE_P1000JXJP4_HOME.tar.md5" and "gt-p1000_mr.pit"
aftern no error in recovery !!! and the tab start normaly !!! and after i try to reflash my phone with "001001-GB-Stock-Safe-v5.zip" for teste only !!! after no errore in recovery !!! I noticed the first firwmare are repair my tab !!!!
i find this stock firm in this thread :
http://forum.xda-developers.com/showthread.php?p=18410689
and link for this firmare is :
http://www.multiupload.com/IVKH1NMW7C
and I hope that my experiences and your posts will help others!

Glad to hear that you are up and running dude.
Sent from my GT-P1000 using XDA Premium App

Help pls , possbile brick

Hello , i tryed to flash an ics rom , http://forum.xda-developers.com/showthread.php?t=1608624 this exactly , everything went fine until remove the battery step and now i cant seem to get it in recovery mode to flash the rom second time. Did i brick it ?
Please help , thank you

Mmmh..So,your phone doesn't get the recovery mode?
And does it get the download mode?

Problem is that i don't know how to do it . I am new to flashing android . My pc doesn't recognize the phone while it keeps restarting . I just need to make it go in recovery to flash the rom one more time . I read that i was supposed to set 3 button mode before flashing , and since i am a newbie at this i did not .
Is there anything that can be done ?

Try the download mode---> vol down+home+power
If you get the download mode you're safe,don't worry
This is a video tutorial that teaches you how to use Odin and flash a Samsung firmware if you can't do it

It worked . Now i have on screen Downloading logo and bellow Do not turn off Target . What i must do next ? Thanks alot for helping me .

And if you can reach this mode flash a sure stock mode like 2.36 with Odin. Then you can flash ICS again
Gesendet von meinem GT-I9000 mit Tapatalk 2

corsair2k said:
It worked . Now i have on screen Downloading logo and bellow Do not turn off Target . What i must do next ? Thanks alot for helping me .
Click to expand...
Click to collapse
Download Odin from here and see this tutorial which contains also a download link for a 2.3.6 JW4 official rom

I downloaded Odin v 1.85 , Pc sees the phone conected but it doesnt get the driver for him . I attached a print screen

Download these USB drivers and install them

Ok i made it , flashed that stock 2.3.6 rom . Now how do i flash that ICS rom ?

First,you have to flash a custom kernel with a custom recovery!
Flash this via Odin on download mode like a rom flash(open the .zip,extract the .tar file,open Odin,put this .tar in PDA and flash!)
ONLY the .tar file,no other ones ok?
After that,put the .zip file of the rom you want install on your sdcard,reboot on recovery,do all the wipes(data,cache and dalvik cache) and install it
Good luck man

Remember to use nitrate from play store to backup efs folder after you root.
Its saved me before.
Trolled from my GT-I9000 using XDA

jimcantfixit said:
Remember to use nitrate from play store to backup efs folder after you root.
Its saved me before.
Trolled from my GT-I9000 using XDA
Click to expand...
Click to collapse
Sorry to correct u but it's called nitrality.
But as he says it's a great tool and you should backup your efs folder as he said

Success New rom working smooth . Thanks a lot guys and especially Nezys , i owe you some beers .
Cheers

You're welcome!
Enjoy your beast
Inviato dal mio GT-I9000 con Tapatalk 2

Galaxy mini 2 Bricked

So I tried to install a rom and every thing went fine. I rebooted my phone via clockworkmod and then it shows me the logo of Galaxy mini 2 and the screen gets whiter and whiter. I tried going back to CWM but it wont open the only thing i can do is go to download mode.
So if somebody coud help me i would appreciate it.

Have you tried reflashing stock?

So are we now creating new topic for every brick? I had the same problem, it's a brick. What did you do?

TheWhisp said:
So are we now creating new topic for every brick? I had the same problem, it's a brick. What did you do?
Click to expand...
Click to collapse
Sorry I didnt know there was a topic already made. I accidently flashed with CWM a rom that was not made for galaxy mini 2. So is there a way to unbrick it using odin?

easy
MINI 2 said:
Sorry I didnt know there was a topic already made. I accidently flashed with CWM a rom that was not made for galaxy mini 2. So is there a way to unbrick it using odin?
Click to expand...
Click to collapse
go into download mode and flsh stock rom via odin

did you flash the trebon build ? If so, you should be able just to reflash with odin

TheWhisp said:
did you flash the trebon build ? If so, you should be able just to reflash with odin
Click to expand...
Click to collapse
Yes i flashed the trebon build. Can somebody explain me how to flash roms with odin because i know only how to flash them with CWM?

MINI 2 said:
Yes i flashed the trebon build. Can somebody explain me how to flash roms with odin because i know only how to flash them with CWM?
Click to expand...
Click to collapse
Download a rom from sammobile for GT-S6500(D or whatever) then download odin3 put ur phone in DL mode press power vol down and home
Install kies and reboot pc
Open Odin3 go to PDA and select the file u downloaded
Press start and wait
Sent from my GT-S6500D using xda app-developers app

MINI 2 said:
Yes i flashed the trebon build. Can somebody explain me how to flash roms with odin because i know only how to flash them with CWM?
Click to expand...
Click to collapse
You could follow my TUT here. xD
take the flashing guide part

Next time, please, check carefully what you're flashing.

Thank you all for your comments.

TheWhisp said:
Next time, please, check carefully what you're flashing.
Click to expand...
Click to collapse
Will do.

How could you even flash it since the updater-script cancels installation if the device name/model number is not in the list?

TheWhisp said:
How could you even flash it since the updater-script cancels installation if the device name/model number is not in the list?
Click to expand...
Click to collapse
Idk, i downloaded it and installed with CWM 6.0.2.8. I havent had any error or warning.

If you can access the Download Mode flash the stock firmware.. mine can't even acces the Download Mode even with USBJig, it still shows a white line..

he had a soft brick, you had a hard brick.. take it to the service center

This should be posted in Q n A not in Android Development.

then report it...posting there is waste of time...since most or all of mini 2 users are here...