Related
I bricked my CDMA Hero. I rooted it with the super one click, and installed a early version of froyo, and had some issues with it. I wanted to get it off, so I used CWM recovery, and formatted everything. Now when I turn it on it goes to the HTC opening screen, and stays there for hours until the battery dies. It will charge, but my computer doesn't recognize it, and it will not boot. What can I do?
Bricked means it is a brick and that is it, your phone still turns on so the good news is that it is not bricked.
Need some more info before anyone can help:
1. You reformatted everything using clockwork recovery
2. Did you re-install a new ROM?
3. Did you restore a nandroid backup?
I would recommend booting into recovery and wiping everything (factory reset and dalvik-cache) in recovery, then reinstall froyo - once you are booted and running you can figure out what you want to put on it. At least your phone would work then.
stonemad said:
I bricked my CDMA Hero. I rooted it with the super one click, and installed a early version of froyo, and had some issues with it. I wanted to get it off, so I used CWM recovery, and formatted everything. Now when I turn it on it goes to the HTC opening screen, and stays there for hours until the battery dies. It will charge, but my computer doesn't recognize it, and it will not boot. What can I do?
Click to expand...
Click to collapse
Just what Heaterz16 said...
I'm also pretty sure your phone isn't bricked, as long as you can still get into Recovery, it Most Likely can be Fixed!
I also Recommend trying to Wipe Everything, then Reinstalling a New Rom, Also as a Suggestion... If it were me I'd Probably Choose a Different ROM to install! My Very First ROM I Flashed was a Cyanogen one, and I had Trouble with it Booting Also!!
Try LiquidSense... its Only 2.1, but its Stable, It Boots Fast, and just plain out Fast as Hell!
You can always Switch to Whatever you want... Once you get your phone back to a Working Condition!
Good Luck!
Sent from my HERO200 using XDA App
I cannot get it into recovery now. It will turn on, but it stops at the initial HTC screen, and stays there until the battery dies. When I connect my phone with my computer, the computer recognizes it, but I can't seem to get the 2.1 exe from HTC.com download to the phone. My guess is I wiped the thing clean. Unfortuneately, I didn't back anything up.
I can't even get into recovery, it just sits on the HTC startup screen until the battery dies. It does recognize when I connect it to my computer, but running the 2.1 exe doesn't do anything.
Can you adb into the phone and flash a recovery?
I think that would be a helpful start.
stonemad said:
I can't even get into recovery, it just sits on the HTC startup screen until the battery dies. It does recognize when I connect it to my computer, but running the 2.1 exe doesn't do anything.
Click to expand...
Click to collapse
Pull the battery, hold volume down and power and you should boot into bootloader. I believe it is *home* to get you back into recovery. Then reinstall a new rom and you should be good to go.
kwahomba said:
Pull the battery, hold volume down and power and you should boot into bootloader. I believe it is *home* to get you back into recovery. Then reinstall a new rom and you should be good to go.
Click to expand...
Click to collapse
kwhomba,
he can't get into the recovery.
mtran2988 said:
kwhomba,
he can't get into the recovery.
Click to expand...
Click to collapse
t-y, got it. Yeah, then adb a new recovery image may be the only thing. But he may not even be able to get in then.
Just a matter of waiting right now.
He did say his computer was recognizing his device, so he might be ok.
If he can flash a new recovery, or even just adb.. then he can start rebuilding it.
stonemad:
You'll want to grab a recovery, and try to connect to your phone via ADB when it's on.
Then do adb shell
then : flash_image recover [name of recovery].img
let us know
Ok, I can get to the CWM recovery, there is no backup files, no recovery files, and no files on my sd card. I cannot seem to get an opperating system on. I mounted my phone to my computer and downloaded .zip files, but it still says no files available.
How do I flash a recovery, I can't find any files anywhere.
i have .zip files on my sd card to flash, but when I try to apply them it says no files found.
Ok, I have been working on this all day. Thank you to every body who answered. This is the situation as best as I see it. I can use the power and the down volume buttons to go to recovery mode. I have ClockworkMod 2.5 and can mount my computer to my sd card. It appears that I don't have an opperating system at all, or anything else on the phone. I have downloaded several .zip files and tried to install them, I can mount them, but when I try to apply them it states that there are no update.zip files on the sd card. I have deduced that I need an opperating system for an update to work, but I could be wrong. I am having a hard time finding the right files to use to get my phone to go. It seems salvageable, but I'm not sure how. People have sugested a couple of Mods to instal, but I don't know how to do that with what I have. CWM is asking for a update.zip, or a recovery.zip, but I don't know wich one at which time, or even how to get it to flash. That is what I think I know, but that is subject to change depening on what you all know.(showing just how foolish I really am) Thanks again people for you time and advice, I really do appreciate it.
Don't select "install update.zip", select "install zip from SD card" or whatever the option is called.
I've tried that too, it seems like all the software is gone. HTC, Sprint, Google, and Android. Does anybody have a download they think will work. I'm at the point to try anything.
stonemad said:
I've tried that too, it seems like all the software is gone. HTC, Sprint, Google, and Android. Does anybody have a download they think will work. I'm at the point to try anything.
Click to expand...
Click to collapse
What software are you talking about? Sprint, Google, and Android what, specifically? A download for what?
Mount usb storage in recovery, put rom of your choice on there, and flash?
what about kernals, how do I know that I have everything I need?
ROMs generally have kernels in the zip builds already. From the sounds of it, you're kind of lost at what you're doing.
Do you have a SD card reader? if so, plug in the SD card to your computer and pull over a ROM zip, like Cyanogenmod or whatever is to your liking.
Then in recovery, go to "install zip from sdcard"
go to "Choose zip from sdcard"
then search for the ROM zip you put on the sd card.
State exactly STEP BY STEP, what you are doing. Your phone is perfectly fine, you just dont have a ROM on your phone, which is why you cant boot. You're not missing kernels, or anything, you simply dont have the baseline of a ROM on your phone yet.
Post back
I don't know where or how to find a rom, I have heard good things about cyanogen, but can't seem to find where to download it. Is ClockworkMod a rom, and if so how do I use it. You're right, I got way in over my head, and now I just want my phone back the way I bought it. What is your favorite rom, and can you give me a link. Thanks again everyone.
Ok, I might have bricked my phone. I had the cm7/Aosp gingerbread mod. But I didn't have apps2sd enabled. So I downloaded rom manager, flashed the newest version of clockwork recovery, and rebooted to recovery, where I partitioned for apps 2 sd with a size of 256 mb and 128mb swap-space . I then factory reset, and formatted Boot, cache, data, everything. After that I went to mount as Usb, and I copied the Rom, gapps, and a battery icon mod back to the phone. But the phone didn't recognize any installable packages on my sd after I un-mounted, so I shut my Hero off in hopes it would when I turned it back on p) . When I turned the Hero on, it went to a Usb-fastboot mode, and I couldn't get it to turn off so I removed the battery from the back of my phone, then put it back in. Now my phone won't turn on at all. Does anybody know what I did wrong and can I fix it?
http://androidcommunity.com/forums/f60/how-to-apps2sd-for-droid-34800/
http://forum.xda-developers.com/showthread.php?t=666420
not sure if this will help but maybe you can find some info there
Hopefully that squared you away. But for future question, please post it in the general or question section. This area is specifically for devs and their projects.
oohaylima said:
Hopefully that squared you away. But for future question, please post it in the general or question section. This area is specifically for devs and their projects.
Click to expand...
Click to collapse
Alright sorry, I think I meant to post it there but then kinda freaked out >.<
spleef said:
http://androidcommunity.com/forums/f60/how-to-apps2sd-for-droid-34800/
http://forum.xda-developers.com/showthread.php?t=666420
not sure if this will help but maybe you can find some info there
Click to expand...
Click to collapse
Thanks Spleef, but I was wondering how to get my phone to turn on again as it seems to have just quit on me
Whenever a ROM doesn't boot up properly, boot loop, freeze, etc, I usually have to pull the battery out. Then when I restart it, I hold down the Volume Down and Power buttons at the same time to boot into recovery. Try doing this while the phone is plugged into your wall charger and see if that helps.
Also, I'm not 100% on how to get the apps2sd working, but I had a question about which version of Clockwork you were using. I thought with CM7 Gingerbread we were supposed to use version 3.0.0.5 of Clockwork. I know there is a new version, 2.5.1.7 I think, that shows up in ROM Manager. Unless something has changed, I don't think it will work with CM7.
I'm still pretty new to this, so hopefully someone else will chime in here for you.
Good luck.
i did the same thing one time you gota wipe everything again i mean even the sd card and extthen take ur sd card adapter and put rom gapps any extras on ur sd card then put it back into ur phone then flash it in the order of rom,gapps,extras,and kernel last if u are using one hope this helps
p.s this was using CWM 2.5.0.1
This just happened to me the other day, except I was trying to use firerats partition mod. See if it will boot by holding volume down or up while powering on. It worked for me, but I had to ruu back to stock and had reroot with z4root.apk
Sent from my HTC Hero CDMA using XDA App
Ok anytime you do a factory reset from the phone you most likely will loose root. And leave your phone charged over night it should come back on. And your swap is to big IMO. For apps to sd try a 28 or 32 swap and 512 partition. Then upgrade you ext from ext2 to ext3. And you were supposed to wipe everything before you flashed the apps to sd file. As in wipe everything data,cache,dev-cache and ext. Then flash your rom,google-apps,and kernel last. Boot up sign into your account and let it sync. Then boot to recovery and flash the apps2sd zip. After that you should install your apps. And I think you should ruu and reroot. Sounds like you lost root when you did factory reset from with in the phone. Just my opinion. Hope it helps good luck.
Something.About.Me.U.Dont.Like.
Its.Cool.I.Understand.AWAH
Hello I recently got my refurbished Captivate from AT&T and it came running 2.1 Android. First thing I did with it was go and root it by downloading the update.zip to it, and that went all fine and well.
Next thing I did was get ROM Manager and installed Clockwork Recovery Mod, then went ahead and made a backup of my ROM. So from here I was getting ready to get myself ready for Cyanogen Mod 7, and grabbed the Clockwork Mod version with speedmod and installed that through the Clockwork Recovery.
After I did this the boot screen changed on my phone and would lock up at the Galaxy S SGH-1897 Samsung screen, which had replaced the 3g one by AT&T. The phone will just hang at this bootscreen for infinite amount of time, any suggestions on how to help?
I'd like to point out that I currently have no USB cable for this phone, I did not receive a micro USB with it as it is a refurbished product and do not happen to have any laying around. I do however have a micro SD card, in which Clockwork doesn't seem to support this.
I come to you asking for help to resolve said issue, I can no longer use my phone as a result. I've tried restoring my backup but the same replaced boot logo appears and refuses to actually start up the phone.
The 3 zips that I can access on the internal SD are
-the root.zip
-clockworkmod
-clockworkmod with SpeedMod
Any ideas?
First of all, you will definitely need a micro USB cable. You need to flash back to stock at the moment. Don't worry though, if it's still showing the boot screen your phone "should" be fine.
Second of all, for CM7 you need to follow the EXACT instructions to install CM7 (you can risk bricking your phone with CM7, unlike any other usual ROMs). Do you know, and understand all of the steps involved?
Sorry, but what were you doing? You need odin to install cm7 & without a cord you were never going to succeed.
As mentioned above you need a cord, and need to reread the instructions
CM7
I have had a ATT captivate for almost 2 years now. It falls in the IMEI range specified by ATT. But it wasn't really a problem until very recently.
It got much worse about 3 weeks ago when the phone kept constantly rebooting. It would load the OS, begin media scanning, once that concluded, it would immediately reboot (almost every 20 seconds). Only way to stop the reboot cycle is to take out the battery. No new apps were installed, no system changes were made when this happened.
I am able to get the phone's menu which allows me to wipe and I am able to get the phone into download mode.
I have read (4) of this article regarding sleepdeath and all corresponding articles referenced.
This is what I did...
1) Performed hard reset, cleared storage. This eliminated all third party apps, returned the phone to stock (I think), but the phone is still rebooting.
2) Attempted to install a brand new rom (CM) via CWM = Problem got much worse. Still rebooting but this time, after the ATT logo appears, the screen changes to static (noise) and reboots. Followed instructions and diles from here.
3) Since the phone became useless, I hunted around to return it to stock again and used this. The phone now boots up into the OS, but now it's back to rebooting.
I repeated steps 2 and 3 just to make sure I didn't miss a step, but same problem.
I have 2 goals:
1) Get the phone working, if at all possible!
2) If that's not possible, recover the 300 pictures that are on the device.
My challenge is that since the phone keeps rebooting every 20 seconds, by the time it connects to my PC via USB as external storage, it reboots! This ofcourse is also preventing me from loading a ROM directly on to the SD card.
So if anyone can help me to do the following:
1) Point me in the right direction to how I can keep the phone in a certain mode or setting (download mode doesn't work) where I can transfer files, recover my pics, and perhaps load a custom ROM?
2) Next steps?? Am I even on the right track? Since the stock rom keeps the phone rebooting, will a custom ROM solve the problem (have not been able to get a conclusive answer on this on the threads referring to sleep death (which this is an exaggerated version of) or is the phone a lost cause?
I know I can call ATT and try to haggle a replacement (since the phone is out of warranty), the only benefit being they don't renew my contract, and I don't have to upgrade.
Any help or guidance is much appreciated.
Wow, bummer
Well i don't know if you can mount the sd card in stock recovery (never used it) but if you can't then you could flash one of the stock one click roms with cwm recovery from this thread.... http://forum.xda-developers.com/showthread.php?t=1300843
In cwm recovery there is an option to mount sd while connected to pc so you can backup your stuff.
For the reboots, could it be your power button? Mine is acting up, and often seems to cause reboots. There are threads about fixing that. Idk just a thought.
Hope that helped a bit
Sent from phone with app
Like the previous post says, maybe try a custom recovery, go to mounts and storage, and mount USB storage. While you're at it, try flashing a compatible ROM through that recovery i.e. GB rom if its a GB kernel with CWM recovery or ICS rom if its an ICS recovery.
Did you try to do a dump of SD card data with adb?
Sent from my GT-I9000 using xda premium
The static issue is because you flashed a gingerbread kernel but you don't have gingerbread bootloaders. You can fix this by flashing an AT&T stock one click with bootloaders.
Once there, you can flash corn kernel and use recovery to mount the sd card.
Or I guess you could flash a froyo kernel.. there's a number of ways to do this.
Sent from a jelly bean
I've been looking all over this site but I can't find anything. I suppose that it's partly because I'm not sure about the problem myself.
A couple of months back (maybe more) I upgraded to the ICS infinitum rom (blue version) with midnight kernel. It was great - the phone worked fine. Well I'm exaggerating, it ****ed up every once in a while. Programs would automatically shut down and it would get really slow after a while. But all in all it wasn't bad, and it was stable enough for me most of the time....
Then, last Thursday everything seemed to go apart, every program on the phone was shutting down. So I thought I'll just restart and it will be fine. When I did, the phone did not come back on. the kernel would load and then it was stuck on the start-up animation in infinite loops.
Now, to be frank, this isn't the first time this has happened. So I didn't panic. Last time I just used the CMW recovery to re-install the kernel and the rom (I keep the files on the sd card). But this time, I wanted to try to avoid the factory wipe for as long as I could, and try finding a different option, knowing that if all else fails, I have something to revert back to.
Then I did the mistake of deleting the init.d file without re-installing anything. I wanted to, but accidentally clicked on the 'reboot now' option. And then all went to ****. The kernel didn't load. I went to recovery and it couldn't mount the sd card so I couldn't re-install it.
I tried flashing a new kernel using odin, and it did get me a bit better: my CWM recovery can read the sd. However, I still can't mount the system. Even worse, when I get to the infinitum zip roms and re-installing it brings up the status 7 error (which, after searching, seems to come up for different reasons for each person)
Despite installing a new kernel, when I reboot the phone now it doesn't load the kernel anymore, it just stays stuck on the welcome screen. I tried using the recovery to re-install a different kernel, it worked, but the phone still won't start - it now automatically skips to the recovery mode. I don't know if I should try flashing a rom through odin, and I'm too afraid to try anything at all now...
Can anyone help me? Is there any way to restore the init.d file or maybe that has nothing to do with my problem?
uvii said:
I've been looking all over this site but I can't find anything. I suppose that it's partly because I'm not sure about the problem myself.
A couple of months back (maybe more) I upgraded to the ICS infinitum rom (blue version) with midnight kernel. It was great - the phone worked fine. Well I'm exaggerating, it ****ed up every once in a while. Programs would automatically shut down and it would get really slow after a while. But all in all it wasn't bad, and it was stable enough for me most of the time....
Then, last Thursday everything seemed to go apart, every program on the phone was shutting down. So I thought I'll just restart and it will be fine. When I did, the phone did not come back on. the kernel would load and then it was stuck on the start-up animation in infinite loops.
Now, to be frank, this isn't the first time this has happened. So I didn't panic. Last time I just used the CMW recovery to re-install the kernel and the rom (I keep the files on the sd card). But this time, I wanted to try to avoid the factory wipe for as long as I could, and try finding a different option, knowing that if all else fails, I have something to revert back to.
Then I did the mistake of deleting the init.d file without re-installing anything. I wanted to, but accidentally clicked on the 'reboot now' option. And then all went to ****. The kernel didn't load. I went to recovery and it couldn't mount the sd card so I couldn't re-install it.
I tried flashing a new kernel using odin, and it did get me a bit better: my CWM recovery can read the sd. However, I still can't mount the system. Even worse, when I get to the infinitum zip roms and re-installing it brings up the status 7 error (which, after searching, seems to come up for different reasons for each person)
Despite installing a new kernel, when I reboot the phone now it doesn't load the kernel anymore, it just stays stuck on the welcome screen. I tried using the recovery to re-install a different kernel, it worked, but the phone still won't start - it now automatically skips to the recovery mode. I don't know if I should try flashing a rom through odin, and I'm too afraid to try anything at all now...
Can anyone help me? Is there any way to restore the init.d file or maybe that has nothing to do with my problem?
Click to expand...
Click to collapse
I suggest flash 3-file GB rom via odin with ticked re-partirion and phone bootloaderupdate.
First of all init.d has nothing to do with the boot of kernel and ROM itself. It's just like autostart in Windows, so if it's missing it shouldn't cause problems.
My solution is to flash a complete stock Gingerbread ROM using Odin. You can get them at sammobile.com. Then afterwards flash a custom kernel and then whatever you like.
If you need help,feel free to ask me
Sent from my Gameboy Color
Yes! Thank you! That worked!!
It happened again! just 10 days later.
Is the Infinidtum rom ****ed up in any way?
it's stuck on the loading part of the rom