[Q] Galaxy s i9000 touch keys not working - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello,
My home key wasn't working because the cable was broken. I've purchased a new part from OEM atleast that's what says the site from which I bought it. I bought the whole module with vibrating motor and fixed the home button issue. However now the touch keys are not working. I've tryed with new stock firmware JVS and JVT, also tryed with SGS Tools (hard reset). Still the keys don't even light up. I've done a lot of research before this post but cant find a solution. The phone still has guarantee but I dont think they will accept it .... Thank you all in advance !
I'm sorry if there are some spelling errors, but I really need help.

FIXED !!!
Dial this into your phone *#*#2663#*#* and update touch keys FW.

thank you it's working with this code : *#*#2663#*#*
great.

glad you've got your touchscreen buttons working again.
WARNING: DO NOT use this code if your touchscreen buttons are working as it will disable the buttons.

i dialed that code and only menu key started working.
back Key and Home Button still not working.
any one please help.

pryerlee said:
glad you've got your touchscreen buttons working again.
WARNING: DO NOT use this code if your touchscreen buttons are working as it will disable the buttons.
Click to expand...
Click to collapse
I have used the code. In result, my phone's back key started working but HOME BUTTON and MANU(OPTIONS) keys are still non functional.
Please help

Related

Keyboard not working

I have a problem with my Kaiser. The keyboard and the front buttons do not work anymore. Only the center front button and the right side stand-by button are working.
I read here on the forums that it can be a software problem? I didn't made any rom update or other chages, I used the phone as it was from the start. After 2 months of using I got this problem with the keyboard. Any advice or should I get the phone to the Service?
I tried soft reset and after that a hard reset (I backed up the data with Sprite), but the problem persists.
Another thing: not making any changes in keys mapping I noticed that the right side stand-by button was mapped for voice recording! That was quite strange, when I activated the screen in the same time it began recording voice. I correctly remaped the button as it was, but again I don't know how it changed by itself...
when you did the hard reset, did you restore your backup right away? or did you test the buttons right after the hard reset?
I've testet the buttons before making the restore. They had the same problem: not working and the stanby button was also mapped as voice recording.
geovadim said:
I've testet the buttons before making the restore. They had the same problem: not working and the stanby button was also mapped as voice recording.
Click to expand...
Click to collapse
after a hard reset the power button was set to voice recording? When you refer to the standby button, do you mean the power button?
If in deed you did a Hard Reset then the device would be back to default settings. If you are getting the power button mapped to voice recording then your device is f**ked up badly, or at least the ROM is trashed.
you sure you didn't try to flash your rom or SPL?
smittyofdhs said:
after a hard reset the power button was set to voice recording? When you refer to the standby button, do you mean the power button?
Click to expand...
Click to collapse
No, after the hard reset the voice recording was still mapped... When I reffer to the stanby button I mean, yes, the power button.
smittyofdhs said:
If in deed you did a Hard Reset then the device would be back to default settings. If you are getting the power button mapped to voice recording then your device is f**ked up badly, or at least the ROM is trashed.
you sure you didn't try to flash your rom or SPL?
Click to expand...
Click to collapse
Absolutely not! I am not a informatician to play with this kind on mods and installs. I only had my software (YM, iGo etc). Never tried to update or change the rom or the SPL.
If it is like you say, this it can't be repaired in the service?
the same problem, but i have a little more strange things:
- device still mapping power (standby) button for voice commander, even after few hard resets without restoring any previous data
- holding power button mapped for record, so after hard reset, even before aligning screen, device starts recording
- when i'm on a desktop, pressing twice power button (off/on), device going to calling screen and trying to found contact that starts with "edfc"
- when i'm in contacts, pressing twice power button (off/on), device trying to found contact in search, that starts with "edfc"
- keyboard doesn't work, front buttons also too
- when i'm typing any message in notes, for example, i can't erase it - backspace button on virtual keyboard doesn't work also
So, what are you thinking about that? Can anyone help me?
Added:
- can't get into bootloader screen (power+camera+reset)
- in Android front buttons are works, keyboard - too, except 4 buttons. guess which? e,d,f,c
Added:
- re-flashing SPL and few ROM's doesn't help
Anyone?
Or I need get prepared to buy another one?
definitely sounds like a hardware issue. you could disassemble it and check if there are any lose connectors
ok. i've checked with another motherboard and the problem is - ... motherboard. can't be more specific right now, i'll try to find out more.
sigh.....sounds spendy. Been having the same issues, if its the motherboard dont know if i should just hold out on fixing it for a touch pro 2 and use my old nokia for a while. hmmmm, hopefully its not something super spendy. Never thought i would miss my tilt so much T_T

Physical BUtton on Xperia besides Power Button Don't Work

So all my physical keys on my xperia x1 including the Volume button, the ok button, the X panel button, the pick up call button, the end call button, the two silver buttons all don't work. None of the keys on my keyboard work either.
I've been trying to hard reset but every method I've found includes holding down the volume button (which doesnt work since that button is unresponsive). I've tried the 2 silver button method along with the poking the stylus in the hard reset hole in the back of the phone but that doesnt work either since the silver buttons are unresponsive.
So now I'm looking for the Clear_Storage thing I've been reading about but I can't find it so could someone please supply me with the directory I could find it in or any other solution you can think of to help me hard reset my phone so I can flash a new ROM.
BTW I've used Hard-SPL to flash roms before, it's just this last ROM from itje got all screwy and made the buttons stop working.
Thanks, Nik
Setting > System > Clear Storage.
Sometimes Itje takes it out of his ROMs, though. You can try reflashing by pc method if it's not there.
Yea I've checked and it's not in there, how would you do it by pc?
Is it that ruu executable that you run while it's synced? For some reason
that never actually worked with my comp which is why I always resorted to the SD Card Flash method, but I can't get into the Hard-SPL loader now cause of the button problem.
Does anyone know how to hard-reset without having to use the hardware buttons, because I really need to be able to use my phone again.
Need Help =/
Next to malfunctioning buttons, is the phone starting up?
What happens, if you plug a USB cable in? If you can select ActiveSync mode, then you could easily try to re-flash another ROM image - maybe the one you have been using was corruptly downloaded or something.
Or, if you get too much of strange behaviour like this, try a stock ROM first, then another custom ROM.
It boots up and works fine as long as I stick to using the touch screen and I can USB ActiveSync it too. I know some of the older ROMs used to have an exe you could run while in ActiveSync and it would auto install but most of the new ROMs assume you're using the SD Card Method so I can't find the PC Installer app.
Alright so I managed to isntall a new version of that Firestorm Rom (3.8 I think) and my hardware buttons still don't work.
Like from the buttons that Works:
Power Button
Camera Button
Optical Joypad (only the center square)
Stuff that doesn't work:
X-Panel Button
Ok Button
Volume Button (up, down, center)
Pick up Call
Hang Up Call
Two Silver Buttons (left and right)
Left and Ride on "D-Pad"
ALL KEYBOARD KEYS
What is their left to do if a new ROM doesn't fix the problem?
what are my options for getting this fixed?
my volume keys dont work, dont know why but sometimes theyre working and sometimes not.
i have the same issue. but my g-letter button works. and all other buttons make the volume go up one notch and then down again. further more when i go into settings and the menu that controls what the buttons it only says it has a left and a right button.
have u been able to figure something out??
began working again
after a month it suddenly started to work again! dont know why or how
is a hardware problem, with your flex.
i can tell you this is hardware problem.flash your phone with orginal spl and orginal rom and send sony ericson.i had same problem.they gave me new unit after 3 months fight good luck.
no doubt, it's hardware problem..
Agree with human75, flash your x1 with stockSPL n original ROM before u send it to SE. Do it via your PC.. Goodluck bro

Weird Kaiser Hardware Button Failure

Hi all, please can you help me with this!?
Firstly when my phone boots or is taken out of sleep mode it immediately activates voice record as if this button has been pressed. It then opens the dialler and types ‘EDFC’. If I open pocket word and then wake the phone up it also types ‘EDFC’ before doing the above.
My keyboard is not working and the only hardware buttons that function are the power button (only for a while), the camera button and the silver select button in the middle of the d-pad. The jog wheel and silver directional d-pad buttons occasionally come to life. The others don’t work (green call and red end buttons, ok, windows etc).
When I use the standard keyboard SIP on the screen the directional buttons and delete do not function?!
I’ve reverted to a stock ROM to make sure this isn’t the problem.
It appears as though my Kaiser thinks these buttons are being depressed, but I’ve checked them and they click normally and release when pressed (even though they don’t perform a function) so nothing is stuck down etc….
I’m going to use AE Buttons to try and unhinge the button functions for now, but it would be great if someone has any suggestions!!
Thanks in advance.
Update - AE Button won't unhinge the buttons or change their function to anything else (e.g. nothing). I can't stop this from happening every time the phone boots/wakes up!
Help!
Mine got the same symptoms last week except it opens quick something or other,and then the dialler dials 2547.The screen for my pin then comes up,which I can enter normally.Home screen fires up normally but the keyboard will not work or any buttons except the silver one in the middle.Searched a bit and this problem is very common although I cannot find a solution anywhere.Can someone please help
AE button didn't work?
When mine did that, I reset all the hardware buttons (not the keyboard, just the buttons reachable from the outside. A soft reset and viola!
That's the only solution I have. It's worked for me 2x.
Also try pulling the battery for 20 seconds or so and restarting. That has fixed my touchscreen not working after it gets spashed 3x. Yeah, my phone is old and abused, but keeps working.
Will
wasilvers said:
"I reset all the hardware buttons (not the keyboard, just the buttons reachable from the outside. A soft reset and viola!"
Click to expand...
Click to collapse
Thanks for your replies - I've got Orange sending me another one in the morning now and sods law it's just stopped happening.... Taking the replacement anyway in case it happens again.
For my knowledge, how did you reset the buttons? I deleted some registry keys to completely stop them working (although I couldn't find the registry keys for the red and green buttons).
Searching on Google there are quite a few reports of this, but no one has ever posted the cause!
I am having the same problem... please help. My phone is going crazy. I did a hard reset but still didnt solve the problem....
I am also having this issue. Phone starts typing EDFC and then initiates the voice recorder. I reflashed various ROMs and regardless of what was flashed.. initially they appeared okay, then it started happening again. I also tried hard and soft resets. Nothng has worked so far.
I resorted to disabling the keys and some of the applications which I dont use which appear to be getting started/run (Voice recorder for one). So far I havent had the issue, knock on wood.
I think this is more than likely a hardware error. My tilt is actually pretty old so I wouldnt be surprised. If someone finds either the cause or a workable solution please post. Im trying to hold off until January when my contact expires to get a new HTC.
I searched and searched but found no solution for this and ended up getting the phone replaced.
HTC seemed to know nothing of such a problem....
Have you tried whacking it?!!?
Hope you get it sorted.
brandall said:
Have you tried whacking it?!!?....
Click to expand...
Click to collapse
Hmm, yes, but I don't see how that helped my phone.
lol, all jokes aside, my friends, I ask in this thread as well,
what is causing this problem? I ran into this issue after ALL my buttons stopped working (except for the power).
I installed a new rom (I forget which one), and still nothing works except for power button.
It would be even better if someone knows the solution!
-Calling for Help-I'm still convinced it is a software/registry problem...
Okay, so there's no solution available for this weird problem of ours.
On the bright side, however, it is amazing that we can still use the phone, even after it requires servicing (some way or another). I have accepted this handicap that has been placed on my phone for now, simply hoping it will grow out of it one day.
But something isn't right. When I looked in the registry (trying to follow some directions I found within the wiki for when your keyboard STILL doesn't work properly), there was a discrepancy between what was supposed to be found in the registry and what was actually there. It wasn't that the values were wrong, it was the names of the values that were different. Why could this be?
Or even if you have moment of time, and you have an AT&T Tilt, and it works perfectly, maybe you could write up a run down of what you have hanging around in that section of the registry?
Hey, just so I can be sure, is there some place I can cross check what I have in my HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP with what is supposed to be there in a fully functioning AT&T Tilt?

menu and return key not working

Hi
I wonder if anybody can help. Friend's I9000 got broken screen. We bought another one with menu and return key not working and replaced the board inside. Now he's got his for working again. However the two keys still don't work. I;ve tried touch firmware update by doing #*#*2663*#*#. This just goes forever and never finishes.The keys do light up and go off when you touch them . However, the functionality is missing.
Thanks
Button Saviour or LMK work well.
Sent from my GT-P7510 using Tapatalk

[HELP] Right Capacitive Key Doesn't Respond

Hi,Guys
I just bought this phone for 1 week and right after I receive the phone, I go straight with flashing Freedom OS + Franco Kernel
And just few hours ago before I post this thread, the phone gives error. The right capacitive key didnt give any respond if i touched/taped/pressed it.
Even if I swap the button between Back or Recent still the right softkey doesn't respond. However if I turn the backlight on and touch the left, the light from the right capacitive key is functional, both give light respond but no respond from the right one.
I already flashed to stock to OxygenOS 4.1.3 but still no luck.
Is this really hardware error or has anybody encountered this kind of problem and manage to fix it ?
Please help.

Categories

Resources