Hello, guys i am on blockbuster rom with telon kernel installed! I want to change my rom and kernel to darky rom and darkcore. What would be the method? A very brief method would be appreciated. Thanx
here you go!!
http://www.darkyrom.com/community/i...wm-sgs-cappy-darkyrom-xxjvr-10-3-beta-1.4508/
If i was going back to a darky ROM on my SGS I would flash 10.2RE through Odin and then simply flash 10.2.1 or the JVS base through CWM. Followed by my kernel of choice if i didn't want to stay on darkcore.
I don't think I would bother with the10.3 beta
Sent from my A501 using XDA App
MrIwik said:
If i was going back to a darky ROM on my SGS I would flash 10.2RE through Odin and then simply flash 10.2.1 or the JVS base through CWM. Followed by my kernel of choice if i didn't want to stay on darkcore.
I don't think I would bother with the10.3 beta
Sent from my A501 using XDA App
Click to expand...
Click to collapse
Thanx alot for the simple instructions,exactly what i wanted.
Btw there are so many versions of darkcore kernel,which one should i flash?
Or when i flash the darky rom with the steps you mentioned the darkcore kernel is installed auto?
hassaan123 said:
Thanx alot for the simple instructions,exactly what i wanted.
Btw there are so many versions of darkcore kernel,which one should i flash?
Or when i flash the darky rom with the steps you mentioned the darkcore kernel is installed auto?
Click to expand...
Click to collapse
The correct darkcore kernel will be included on install.
Sent from my A501 using XDA App
Hi, i have the latest CM7 rom and i want to flash better kernel - glitch or talon. I have a problem with it. i flast it and after i do a reboot. kernel start, boot animation too start but then do nothing. ring is always rotating.
where is a problem ?
I got that too bud....I think its some compatibility issues :s
Sent from my GT-I9000 using XDA Premium App
Which version of Glitch are you trying to flash?
Sent from my GT-I9000
I need some fast kernels for cm 7.1.... its quite good ..
Yesterday i flashed fugumod 3.0 kernel . Its not working on cm7.1
Are there any specific kernels for 7.1 !!! i need more speed .......
Thanks in advance
FuguMod can be problematic. Try glitch v12 or neo platypus kernel.
Sent from my GT-I9000 using xda premium
kingharsha said:
I need some fast kernels for cm 7.1.... its quite good ..
Yesterday i flashed fugumod 3.0 kernel . Its not working on cm7.1
Are there any specific kernels for 7.1 !!! i need more speed .......
Thanks in advance
Click to expand...
Click to collapse
i prefer using Platypus neo kernel. because it has CWM 5. while glitch is CWM 4 i think if not 3, it's 4. and CWM 5 looks really good. you can check it out in my siggy. but you have to flash the kernel cleaning script. look for the good version. and then flash the kernel that you want. and done
Glitch is faster than all. Try yourself you will believe me.
Sent from my GT-I9000 using Tapatalk
I'm on the Icy Glitch V14 Kernel at the moment with AOKP ICS Milestone 6.
My current plan is to install the first Milestone release of AOKP JB.
Does anyone know the best kernel to use with JB? I'd like to know the person opinions of a few people, thanks.
Basically I want the most stable possible, with good speed. I don't really want any overclocking though,
Then just use aokp stock kernel that come with it I don't think there any over clocking in it
Sent from my SGH-I897 using xda app-developers app
casper846969 said:
Then just use aokp stock kernel that come with it I don't think there any over clocking in it
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
How do I flash the stock kernel? It's not when just flashing a zip file in the recovery because I had this Icy Glitch kernel BEFORE I ever flashed AOKP and I still have it after AOKP.
Do I just extract the boot.img out of the rom zip and flash it with fastboot?
OK what you need to find out is what is jb stock kernel on jb aokp then you find that kernel they should have a flash zip then go in to recovery and flash it I think they are using cm 10 stock kernel am not for sure tho
Sent from my SGH-I897 using xda app-developers app
Still confused where I'd get that.
Hobox10 said:
How do I flash the stock kernel? It's not when just flashing a zip file in the recovery because I had this Icy Glitch kernel BEFORE I ever flashed AOKP and I still have it after AOKP.
Do I just extract the boot.img out of the rom zip and flash it with fastboot?
Click to expand...
Click to collapse
That's because glitch was the kernel for aokp. I think you'd be fine staying with the stock kernel. Also, this device doesn't have fastboot.
Sent from my SGH-I777 using xda premium
korockinout13 said:
That's because glitch was the kernel for aokp. I think you'd be fine staying with the stock kernel. Also, this device doesn't have fastboot.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Oh lol my bad I knew that. I was super tired yesterday haha. I use Odin right?
And wow I didn't realize glitch was the kernel for AOKP. Knowing that makes a lot of sense now.
Just to be sure though... Just flashing the new AOKP will install the new kernel with it correct?
Hobox10 said:
Oh lol my bad I knew that. I was super tired yesterday haha. I use Odin right?
And wow I didn't realize glitch was the kernel for AOKP. Knowing that makes a lot of sense now.
Just to be sure though... Just flashing the new AOKP will install the new kernel with it correct?
Click to expand...
Click to collapse
Well no, you probably won't need Odin, only CWM. But yeah, roms always come with their own kernel.
Sent from my SGH-I777 using xda premium
Hey, im a noob so heres my problem, ive experimented alot on my p1000 and one thing that bothers me alot was the video playback which was either choppy or laggy on CM so ive always restocked it back to GB. I think the solution for this is to use another kernel other than CwM. IS there any other kernels that i could try, the ones that could result in very good hd playback once im on a custom rom?
Sent from my GT-P1000 using xda app-developers app
First kernel and CWM are two different things CWM is one of the recovery mode.
For HD videos... You can use CM 10 or 9 or give AOKP SGT7 a try.... They are much stable...
Sent from Android
Ok so kernel and cwm are different i get it, but could you tell me how to install the heimdall kernel on p1000 step by step? Ive read from somewhere that it could improve hd video playback. And ive already used cm 9 stable and there is no cm 10 stable yet before but the problem persisted. . .
Sent from my GT-P1000 using xda app-developers app
Heimdall is a tool to flash ROM/kernel.
It is not a kernel. You read wrongly.
Find the same article and read again with the new understanding of what heimdall/kernel/cwm are, and see if you can make out what is that that was recommended.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Heimdall is a tool to flash ROM/kernel.
It is not a kernel. You read wrongly.
Find the same article and read again with the new understanding of what heimdall/kernel/cwm are, and see if you can make out what is that that was recommended.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Yes you're right, I kinda read wrong, the article said about the humberos, now that is a kernel right? I've installed it, and I realized that its a modified version of CwM but the real question is that do I have to keep using the firmware from humberos or could I use other custom roms like SGT7 aokp or Cyanogenmod?
It should be fine using it with other ROMs as long as both are from the same android version
Sent from my Galaxy Nexus using Tapatalk 2
Humberos is the guy's nickname. His ROM and kernel may also be referred to as Humberos.
But he made kernels back from Gingerbread days.
So we better know which one you flash.
You can use his kernel, for example his JB kernel in, in cm10 and aokp jellybean.
you can use his ICS kernel in AOKP ICS, CM9, and so on.
For CM10.1 it is yet a different kernel.
And it is not just different cwm, the kernel itself is different.
Sent from my GT-P1000 using xda app-developers app
Well ur explanation makes sense, I installed humberos and then humberos's cm 10.1 but the problem was with the camera so I decided to install aokp Sgt7 jb and then the aokp logo goes into boot loop. I then powered off, did the power + volume up and realised that I had installed the cyanogenmld cwm over the humberos. Now what to do?
Sent from my GT-P1000 using xda app-developers app
bisharat said:
Well ur explanation makes sense, I installed humberos and then humberos's cm 10.1 but the problem was with the camera so I decided to install aokp Sgt7 jb and then the aokp logo goes into boot loop. I then powered off, did the power + volume up and realised that I had installed the cyanogenmld cwm over the humberos. Now what to do?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
That's because you installed 4.1.2 ROM with 4.2.1 kernel... It is better for you I'd you restock then update again... And please please please install the ROM with it's kernel because both of them are good AOKP or CM
Sent from my Galaxy Nexus using Tapatalk 2
Actually from the description, installing aokp sgt7 jb after running cm10.1 should not be an issue as long as you do the 3 wipes (cache, data, dalvik-cache).
aokp sgt7 will replace the cm10.1. But nevertheless, if it is still looping, do the restock.
They are all using CWM 6.x nowadays, it doesn't really matter, but the kernel has to be for the right ROM.
BTW, too many people think cm10.1 is just a little update from cm10.
It is not. It is a completely new framework. Treat it as a different ROM.
So all I gotta do is restock back to GB, root GB, install the humberos cm 10 kernel from SD after wiping everything, and then install aokp Sgt 7 or cm 10 right?
Sent from my GT-P1000 using xda app-developers app
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
salahmed said:
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Ok the instructions are well understandable but alotta files to download and a hell of lotta instruction manual to read. Its gonna take me a day to absorb all that and then start the "surgery" of my patient the p1000. Thanx again for the post though, will let u now through this post if any more queries. . .
Sent from my GT-P1000 using xda app-developers app
salahmed said:
http://forum.xda-developers.com/showthread.php?p=31433228
Follow this thread... Flash gb stock 5 safe... Then flash overcome kernel then flash the ROM you want...
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
ok well ive flashed the overcome kernel and then I flashed the overcome 4.1 aka the overcome experience and its actually quite fantastic. On my way to flash JB from CM. btw do I have to register the divx licenses? as well as other licenses?
ok im using overcome 4.1.0 and its fabulous. but before I go towards JB, can someone pls explain how to wipe the 3 caches using the overcome kernel, since its quite new to me? also when flashing to cm jb, do I have to clear the caches and then install from internal sd card? Is that how I upgrade it, not clean install it?
ok so I flashed aokp and the big problem is that it installs cwm over the overcome kernel and so the video problem still persists. Isnt there a way to remove the cwm recovery from the aokp rom?
You got it all wrong.
in P1000, recovery is included in the kernel.
Overcome kernel has cwm 5.0
Aokp kernel and cm kernel has cwm 6.0.
Wipe cache and wipe data are there in main menu of cwm.
Wipe dalvik cache is in Advanced menu.
You have overcome ROM 4.1, boot to cwm and flash aokp a few times until it is done, then flash gapps.
Reboot.
There is never a need to remove cwm. Where do you read such idea?
Sent from my GT-P1000 using xda app-developers app
priyana said:
You got it all wrong.
in P1000, recovery is included in the kernel.
Overcome kernel has cwm 5.0
Aokp kernel and cm kernel has cwm 6.0.
Wipe cache and wipe data are there in main menu of cwm.
Wipe dalvik cache is in Advanced menu.
You have overcome ROM 4.1, boot to cwm and flash aokp a few times until it is done, then flash gapps.
Reboot.
There is never a need to remove cwm. Where do you read such idea?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I didn't read it, I just thought about it. Anyhow, I flashed aokp a few times just like you said, and flashed gapps (obviously), but result is still the same. I'll post a video ASAP on the video playback performance that I'm still complaining about...
Video is a kernel/codec related problem.
It is not logical to link it to gapps or cwm.
Sent from my GT-P1000 using xda app-developers app
Ok so its a kernel/codec problem, what to do about it?
Sent from my GT-P1000 using xda app-developers app