Related
Update 14/12/2011
Watch it in action here http://www.youtube.com/watch?v=OojU0REhrL0.
Update 13/12/2011
bLED kernel module updated to 0.2. Should fix the random crash occuring. Not sure how many of you guys checked the dmesg and found out plenty of stack traces on 0.1
Grab your copy bled-0.2-lkm-update.zip and flash with Clockworkmod. Leave the bled-0.1.apk installed as is, no update is available for that yet
Original post
bLED touchkey button notification for GALAXY Note, version 0.1-EA
The wait is over.
Introducing bLED, my version of blinking notification through touchkey button LEDs. It's still on its early access version 0.1, and there are still some known inconveniences or bugs. Please refer to the known problems section for more info.
After applying the patch and installing the apk, your GALAXY Note will blink any notification found on the status bar, including missed calls and (TouchWiz) SMS
This MOD has been tested on KKA kernel, but it should support all stock kernels (seems like none of custom kernels are supported). But if anything happens, you can restore with the nandroid backup of (just) your system image.
eybee1970 said:
ok, unfortunatly this Mod works with none of newer FM- and Abyss-Kernels....so we have to wait for the devs implementing stock touchkey drivers.
For all ROCKET ROM Users: of course you can switch to any CF-Root Kernel and this Mod will work - but you'll lose important init.d-tweaks if you do so, cause none of chainfires kernels support init.d-scripting
Click to expand...
Click to collapse
I could be wrong, it could possibly be another issue rather than stock touchkey driver.
angelom said:
I entered the stock touchkey drivers but bled still does not work.
At this point I do not think it's a driver issue.
And then FM 1.4 does not have the modified drivers
Click to expand...
Click to collapse
Prerequisites
- You'll need a clockworkmod-enabled GALAXY Note. Some advanced users can also load the kernel module by him/herselves.
Installation
0) Do nandroid backups!
Will not held responsible for bricking your phone if you don't backup first
1) Install the MOD
1.a) Download the update.zip (updated to bled-0.2-lkm-update.zip) and copy over to your SD card
1.b) Reboot in CWM to flash the update.zip. Go to "install zip from sdcard", "choose zip from sdcard", navigate and select the bled-0.2-lkm-update.zip.
1.c) Power off the phone, and start it again (obviously)
2) Install the bLED accessibility service
2.a) Go to "Settings", "Applications". Tick on "Unknown Sources" option.
2.b) Download bled-0.1.apk and install it on your phone. Don't look for it afterwards on your drawer menu as it does not contain real Activity-based application.
2.c) Go to "Settings", "Accessibility". Tick "Accessibility" and "bLED". Just ignore the warning when ticking "bLED", as I'm not interested on your personal details
Lock your phone. Have missed calls, SMSes, Whatsapp messages, GMail, whatever. They're all going to be blinked by bLED
Known issue
- Duration of blinking is currently limited to 15 minutes
- There will be several seconds of delay before it will blink sms and missed calls. It happens due to the currenlty implemented notification logic. More of a workaround instead of elegant solution. Hope will have better logic for next releases on handling them.
- There are still some mutex locking bugs on KKA kernel. Very ironic, there seems to be some struggle to support PMIC on the currently best SoC in the world, by looking at the kernel codes.
Enjoy
apk link dosen't work!
Let´s try it out
yeahhhh....great man!!!
madguylb said:
apk link dosen't work!
Click to expand...
Click to collapse
Anyone with apk link problem as well?
Sent from my GT-N7000 using Tapatalk
watch_mania said:
Anyone with apk link problem as well?
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
no, works...
Did you discover any negative side effects on e.g. battery life?
eybee1970 said:
no, works...
Did you discover any negative side effects on e.g. battery life?
Click to expand...
Click to collapse
Well I just got the kernel module working by last night and the accessibility service earlier today. Not enough time to tell yet
Will try blinking it tonight and see how much battery it would drain
But you can always disable the bLED accessibility service when you don't need it
Sent from my GT-N7000 using Tapatalk
THANK YOU MAN !
This was such an anoying point that made me not love my Note !
Please keep developing, you are doing great work for all Note Users !
I hope MIUI and Cyanogen will make a Note-Port soon and integrate your LED Notification MOD
Hi guys I've installed but doesn't seem to be working I'm on rocket ROM and antes kernel and using go SMS can anyone help
brockyneo said:
Hi guys I've installed but doesn't seem to be working I'm on rocket ROM and antes kernel and using go SMS can anyone help
Click to expand...
Click to collapse
try switching to latest Abyss Kernel 2.0
eybee1970 said:
try switching to latest Abyss Kernel 2.0
Click to expand...
Click to collapse
Hi sorry I should of said I'm already on the abyss 2.0
reset
After installing everything looked ok in 5 minutes there was reset the phone :-(.
But otherwise good
Main concern:
How is the power management on this ?
PATLEN said:
After installing everything looked ok in 5 minutes there was reset the phone :-(.
But otherwise good
Click to expand...
Click to collapse
Which kernel and version are you using? Yes there circumstances where the mutex crashes the system. It happened once on my KKA, but never afterwards. I think I have to consider some other ways for doing semaphores for bLED
brockyneo said:
Hi sorry I should of said I'm already on the abyss 2.0
Click to expand...
Click to collapse
Ok the Abyss kernel had BLN mod patched on the melfas touchkey driver. You needs kernels with stock melfas touchkey driver, left intact. Seems that BLN is not functional yet on the Abyss kernel anyway? Maybe you can ask him to revert to original melfas touchkey driver from Samsung
i use this kernel
http://forum.xda-developers.com/showthread.php?t=1331784
directly:
http://forum.xda-developers.com/attachment.php?attachmentid=791221&d=1321958928
PATLEN said:
i use this kernel
http://forum.xda-developers.com/showthread.php?t=1331784
directly:
http://forum.xda-developers.com/attachment.php?attachmentid=791221&d=1321958928
Click to expand...
Click to collapse
That one is stock ones right? Then I believe it should work. But please post the results here
waste of time. It does not work!
ok, unfortunatly this Mod works with none of newer FM- and Abyss-Kernels....so we have to wait for the devs implementing stock touchkey drivers.
For all ROCKET ROM Users: of course you can switch to any CF-Root Kernel and this Mod will work - but you'll lose important init.d-tweaks if you do so, cause none of chainfires kernels support init.d-scripting
vuhongduong said:
waste of time. It does not work!
Click to expand...
Click to collapse
Well at least I wasted much more time than you did! But guess what, it worked on mine
Hi guys
I didn't hear any notification sounds: neither when my battery is low / fully charged, neither when my wifi detects a new network etc
i have a tone (not silance) to my notification settings in sound and my volume is maxed. is this an issue? got 2.3.5
what rom?
try to fullwipe (make backup b4 fullwipe)
still got the same??
try to reinstall the rom..
still problem??
just use another rom...
i got gingerdx
did a full wipe before installing and a full wipe just after i installed gingerdx.
the phone should ring when i got something in my notification bar?
I'm not really sure lattest version of GDX..
try to use provided notification...
what does it mean "provided notification"? i changed only the notification tone
oh..I thought u use mp3 or whatever tone for notification..
provided mean the pack tone from GDX
ok...let check if problem from phone or rom...
try to install other rom 1st
waiting for your reply
pesky_89 said:
waiting for your reply
Click to expand...
Click to collapse
what r u waiting for??
just try to flash other rom to check where is the matter come from
I'm waiting for your result man..
please make it fast it on 5am here on malaysia
I am currently using gingerdx v22 and it runs great, only I have problem that the rom does not have automatic brightness. Can I make it to work auto brightness correctly by copying some libs from other roms, if yes then which libs should I copy and in which rom auto brightness is working perfectly?
mujeeb999 said:
I am currently using gingerdx v22 and it runs great, only I have problem that the rom does not have automatic brightness. Can I make it to work auto brightness correctly by copying some libs from other roms, if yes then which libs should I copy and in which rom auto brightness is working perfectly?
Click to expand...
Click to collapse
For me the best auto brithness have primeHD and frogy furnetal rom. If you want you must copy from system/lib/hw light.default.so and edit some lines in system/etc/hw.config
Has anyone managed to get a good functional auto brightness working on GingerDX by only adusting the settings in the menus? If so, what settings work well?
What about 'window length', 'sample interval' etc?
Thanks
Impster
Use GDX v 26....
The autobrightness works fine for me in it
sent from my phone using hands and brain...
harshitgroup said:
Use GDX v 26....
The autobrightness works fine for me in it
Click to expand...
Click to collapse
Good for you. However your comment doesn't really help though, does it?
impster said:
Good for you. However your comment doesn't really help though, does it?
Click to expand...
Click to collapse
I just suggested to use gdx v26 'cos the autobrigtness works fine in it..
So u see my post helped..
sent from my phone using hands and brain...
impster said:
Has anyone managed to get a good functional auto brightness working on GingerDX by only adusting the settings in the menus? If so, what settings work well?
What about 'window length', 'sample interval' etc?
Thanks
Impster
Click to expand...
Click to collapse
I dont get ur question...
Just click the option autobrightness in the display menu and it must work fine...
sent from my phone using hands and brain...
I am on GDX v026. In fact, on all versions of GDX i have used, auto brightness has never worked as it should.
If you look in Cyanogen brightness settings you'll find all sorts of autobrightness parameters that you can change and edit.
If you hop onto Gingercruzt you can see how well autobrightness should work.
You'll see then that GDX autobrightness does not work well at all - it is probably the only flaw in an otherwise fantastic rom.
I decided to create a new thread solely for Q/A and for people who are exeriencing issues running LANIGHT. Many issues can be solved by flashing different kernel/patch/fix/modem or going back to stock.
Try flashing DarkyRom RE: http://www.darkyrom.com/index.php?th...aptivate.6062/ (Captivate guide)
Then flash JB on it with proper instructions.
When an application crashes I get the option to close it or report the crash. When I click to report the crash it then says that the Play Store crashed. Is there a fix for this?
Still have ringtone issue
I installed 6.5 dd and all went well, but I still have the disappearing ringtone issue. Tried the fix and didn't work. I came from 4.2 dd. Any comments on how to try to fix this? This ROM is great.
Flip_RX said:
I installed 6.5 dd and all went well, but I still have the disappearing ringtone issue. Tried the fix and didn't work. I came from 4.2 dd. Any comments on how to try to fix this? This ROM is great.
Click to expand...
Click to collapse
Did you try flashing semaphore or flashing the rom with a complete wipe? People reported flashing the different kernel sometimes fixes it... Not sure if it's kernel related which is highly unlikely.
I ran the rom with no issues. I remember it was an issues back in 4.2DD but it was gone when i applied the fix... Not everyone that flashed reported that issue maybe that's why i never got serious about it.
Lockscreen wallpaper image?
is there a way to set a different wallpaper image to the lockscreen?
I can't seem to find this option in the Lanigh 6.5 rom.
Flip_RX said:
I installed 6.5 dd and all went well, but I still have the disappearing ringtone issue. Tried the fix and didn't work. I came from 4.2 dd. Any comments on how to try to fix this? This ROM is great.
Click to expand...
Click to collapse
Same here, but I have to confess that I made a dirty flash wiping dalvik cache only. I'll try to make a full wipe to see what happens.
AceofSpades90 said:
Did you try flashing semaphore or flashing the rom with a complete wipe? People reported flashing the different kernel sometimes fixes it... Not sure if it's kernel related which is highly unlikely.
I ran the rom with no issues. I remember it was an issues back in 4.2DD but it was gone when i applied the fix... Not everyone that flashed reported that issue maybe that's why i never got serious about it.
Click to expand...
Click to collapse
I followed instructions from the OP, full wipe 3 times...format individual system/data/datadata/cache/dalvik. Haven't tried semaphore, I like devil ever since team nyx's 4.0.3. With this ROM I have never had wifi issues, since v1. Besides the disappearing ringtones, gallery pictures also disappear just leaving online pics...no FC though. I use quikpic so no biggie.
Telpesoron said:
Same here, but I have to confess that I made a dirty flash wiping dalvik cache only. I'll try to make a full wipe to see what happens.
Click to expand...
Click to collapse
No luck. Actually it it's worse, since before flashing I had access to standard ringtones, those that come with the ROM, but not those which I created by myself. After flashing, all ringtones disappeared. Tried with the ringtones patch, but also no luck.
Next step, it's to find semaphore and flash new kernel. Any clue where I can download it?
Another repeating issue that occurs to me is the FC in the messages app.
EDIT: I've foud Semaphore and flashed it with Odin. I couldn't check if it solved the ringtone issue, since after apply this kernel, I had two severe issues: my screen rotated 90° to the right and the external-sd was not recognized. I've cleared cache, dalvik, fixed permissions and no luck.
Going back to 4.2 by now.
Sent from my SGH-I897 using xda app-developers app
Quick question how do i disable the led notifications, cant seem to find the setting (im probably blind )
BradleyR2010 said:
Quick question how do i disable the led notifications, cant seem to find the setting (im probably blind )
Click to expand...
Click to collapse
In devil kernel manager, go to misc tab (last 1 to the right) > scroll to the bottom, it's there.
BradleyR2010 said:
Quick question how do i disable the led notifications, cant seem to find the setting (im probably blind )
Click to expand...
Click to collapse
Uncheck "Backlight Notification" in the "Misc" tab if using Devil Kernel Config app. :thumbup:
Sent from my SGH-I897 using XDA
Loving the ROM so far. Finally decided that I don't need most of the customization options offered by other JB roms. however, I do miss the battery percentage. Any way to enable that, maybe through a theme or app?
EDIT: sneaky ba$terds, hiding it in the display options.... Looks awesome now. Found a new fav daily driver!
I installed new devil kernes 1.7.4VC and did not loose sound as others are posting. I wiped cache / dalvik & reboot recovery.
P.S. version 1.7.5 fixes the sound accourding the kernel thread.
Flip_RX said:
I installed new devil kernes 1.7.4VC and did not loose sound as others are posting. I wiped cache / dalvik & reboot recovery.
P.S. version 1.7.5 fixes the sound accourding the kernel thread.
Click to expand...
Click to collapse
I can confirm, 1.7.5 VC up and running beautifully. No sound issues whatsover. :thumbup:
Sent from my SGH-I897 using XDA
Lockscreen Custom Image .?.
ronkoni said:
is there a way to set a different wallpaper image to the lockscreen?
I can't seem to find this option in the Lanigh 6.5 rom.
Click to expand...
Click to collapse
I think this must be a common issue, I fixed this by plugging into my pc and safely removing the sd card. but next day same thing .?. I tried to apply a different lockscreen image and it wouldnt load images in gallery .?.
-btw, Love this Rom :highfive: ! It Is Fast. :Thanx Yo: :good:
In a week ive took a Captivate i897 from stock froyo 2.2 to cwmR to Devil kernel 1.6.1 <- which I really like. I first installed CM10 and was satisfied but got to reading around and flashed LAnight 6.5 DD last night (the proper way explained on thread). only played with it for a few hours and loved its speed. But today ran into problem with changing lock screen background image to custom image.
** is there a permanent fix for this, i dont always have my pc with me.
--Also noticed in both CM10 and LAnight 6.5DD, I can only turn on Bluetooth, is there a way to configure it like settings menu in stock froyo .?.
*edit, figured it out, long press WiFi or Bluetooth opens sub menu for settings, DuH. Im a Android Newb.
BradleyR2010 said:
Quick question how do i disable the led notifications, cant seem to find the setting (im probably blind )
Click to expand...
Click to collapse
You don't need to download Devil kernel manager if you don't want to. It's somewhere in the settings (different Lanight versions have it hidden in different places...).
Probably, under settings -> developer options
Or settings -> extras
Or settings -> tvout
Or there's a galaxy s app...
Maybe there are more places I hid it in different versions lol I had to move things and its as unorganized as my rom thread :/
ronkoni said:
is there a way to set a different wallpaper image to the lockscreen?
I can't seem to find this option in the Lanigh 6.5 rom.
Click to expand...
Click to collapse
I remember putting an option in 5.2 for that... Not sure where but it should be in 6.5?
A lot of custom things are hidden so you may have to find them...
BradleyR2010 said:
Quick question how do i disable the led notifications, cant seem to find the setting (im probably blind )
Click to expand...
Click to collapse
In 6.5 its under Settings/TV Out :thumbup:
Sent from my SGH-I897 using XDA
AceofSpades90 said:
I remember putting an option in 5.2 for that... Not sure where but it should be in 6.5?
A lot of custom things are hidden so you may have to find them...
Click to expand...
Click to collapse
I have searched every menu option under settings that i saw. i still cant find a way to set the lock screen image. could someone please point me in the right direction?
feature request
Hi
I know that is Q&A section
However I did not find feature request section
You ROM is naturally briliant! Thanks!
However could you please include Russian T9 letters in dialer in future releases?
Thank you very much in advance
Vladimir
Very weird problem when on lanlight (or any JB rom)
I installed V6.5DD using the exact method you wrote on the OP. I was coming from CM9, it booted up correctly and everything works great except three things: 1) i have no lock screen (it is checked) 2) I don't get any notifications, whatsoever(i can pull it down, but i hear an email or sms come in and nothing appears) 3) when i hold the home button the recent apps don't show.
I formatted everything again and re flashed, same exact problem.
What should i do? everything worked well on cm9
please help if you can.
I installed different JB roms and none worked.
I decided to go back to CM9, and guess what? none of those thing i outlined works.
It looks i have to odin back to stock. Can anyone please help me
sincerely,
Thatguy
Hi
i am on stock rom .205 and rooted . i love gravity box xposet and expanded desktop mode for games but after install gravity my ring volume and notification volumes tobe unlink while in media tweak its linked !!!
please help me to fix this ....
someone have not fix or apk that i can use it to link volumes ?
This might be due to incompatibility. GravityBox is built for pure AOSP. Since you're using the stock ROM I guess you can't benefit much from GB. Your options here is to disable expanded desktop mode from GB, or cope with the volume unlink.
when i go to media tweak and unlilnk and link option its working good nut when reset phone unlink volume again.
amir-kia said:
when i go to media tweak and unlilnk and link option its working good nut when reset phone unlink volume again.
Click to expand...
Click to collapse
Yes I understand however I, nor you, can't do anything to fix this. As stated in the main GB's thread, he will not respond to any request for ROMs that is not AOSP. Does disabling Expanding Desktop Mode recovers the original working state of the volume?
TechnoSparks said:
Yes I understand however I, nor you, can't do anything to fix this. As stated in the main GB's thread, he will not respond to any request for ROMs that is not AOSP. Does disabling Expanding Desktop Mode recovers the original working state of the volume?
Click to expand...
Click to collapse
No , expanded desktop have not affect on unlink volumes . after active GB without change anything problem occur and only way to fix is that i go to media tweak and uncheck and check link volumes option .
ta buggy myself, I lost to the volume options I added in my framework, when the battery is at 100% it does not appear the battery percentage. Finally a good and very stable yet so many more versions ta module that has already should think everything is 100% and not half, I already stopped using pq not use anything with bugs so I'll get to use the gravity box when you have everything ok otherwise without gravitybox
Marília de Oliveira said:
ta buggy myself, I lost to the volume options I added in my framework, when the battery is at 100% it does not appear the battery percentage. Finally a good and very stable yet so many more versions ta module that has already should think everything is 100% and not half, I already stopped using pq not use anything with bugs so I'll get to use the gravity box when you have everything ok otherwise without gravitybox
Click to expand...
Click to collapse
I myself had to ditch GB because CM can't cope with it very well. Sadly enough CM was mentioned in the main thread.
With sadness, I uninstalled the module and reboot. Until now, my phone is stable but I miss GravityBox..
TechnoSparks said:
I myself had to ditch GB because CM can't cope with it very well. Sadly enough CM was mentioned in the main thread.
With sadness, I uninstalled the module and reboot. Until now, my phone is stable but I miss GravityBox..
Click to expand...
Click to collapse
I also feel because it is a great module it more developer're not getting along with the module he can not fix the errors, should call others to help you
Marília de Oliveira said:
I also feel because it is a great module it more developer're not getting along with the module he can not fix the errors, should call others to help you
Click to expand...
Click to collapse
Nah it's okay. I've found many alternatives to the features that GB provide. Though there are some that I still can't find any, but I am happy with what I have now. If I ask, my thread will be abandoned and unanswered.