Database Develop

[MOD] bLED button LED notification for Galaxy Note

Update 14/12/2011
Watch it in action here http://www.youtube.com/watch?v=OojU0REhrL0.
Update 13/12/2011
bLED kernel module updated to 0.2. Should fix the random crash occuring. Not sure how many of you guys checked the dmesg and found out plenty of stack traces on 0.1
Grab your copy bled-0.2-lkm-update.zip and flash with Clockworkmod. Leave the bled-0.1.apk installed as is, no update is available for that yet
Original post
bLED touchkey button notification for GALAXY Note, version 0.1-EA
The wait is over.
Introducing bLED, my version of blinking notification through touchkey button LEDs. It's still on its early access version 0.1, and there are still some known inconveniences or bugs. Please refer to the known problems section for more info.
After applying the patch and installing the apk, your GALAXY Note will blink any notification found on the status bar, including missed calls and (TouchWiz) SMS
This MOD has been tested on KKA kernel, but it should support all stock kernels (seems like none of custom kernels are supported). But if anything happens, you can restore with the nandroid backup of (just) your system image.
eybee1970 said:
ok, unfortunatly this Mod works with none of newer FM- and Abyss-Kernels....so we have to wait for the devs implementing stock touchkey drivers.
For all ROCKET ROM Users: of course you can switch to any CF-Root Kernel and this Mod will work - but you'll lose important init.d-tweaks if you do so, cause none of chainfires kernels support init.d-scripting
Click to expand...
Click to collapse
I could be wrong, it could possibly be another issue rather than stock touchkey driver.
angelom said:
I entered the stock touchkey drivers but bled still does not work.
At this point I do not think it's a driver issue.
And then FM 1.4 does not have the modified drivers
Click to expand...
Click to collapse
Prerequisites
- You'll need a clockworkmod-enabled GALAXY Note. Some advanced users can also load the kernel module by him/herselves.
Installation
0) Do nandroid backups!
Will not held responsible for bricking your phone if you don't backup first
1) Install the MOD
1.a) Download the update.zip (updated to bled-0.2-lkm-update.zip) and copy over to your SD card
1.b) Reboot in CWM to flash the update.zip. Go to "install zip from sdcard", "choose zip from sdcard", navigate and select the bled-0.2-lkm-update.zip.
1.c) Power off the phone, and start it again (obviously)
2) Install the bLED accessibility service
2.a) Go to "Settings", "Applications". Tick on "Unknown Sources" option.
2.b) Download bled-0.1.apk and install it on your phone. Don't look for it afterwards on your drawer menu as it does not contain real Activity-based application.
2.c) Go to "Settings", "Accessibility". Tick "Accessibility" and "bLED". Just ignore the warning when ticking "bLED", as I'm not interested on your personal details
Lock your phone. Have missed calls, SMSes, Whatsapp messages, GMail, whatever. They're all going to be blinked by bLED
Known issue
- Duration of blinking is currently limited to 15 minutes
- There will be several seconds of delay before it will blink sms and missed calls. It happens due to the currenlty implemented notification logic. More of a workaround instead of elegant solution. Hope will have better logic for next releases on handling them.
- There are still some mutex locking bugs on KKA kernel. Very ironic, there seems to be some struggle to support PMIC on the currently best SoC in the world, by looking at the kernel codes.
Enjoy

apk link dosen't work!

Let´s try it out

yeahhhh....great man!!!

madguylb said:
apk link dosen't work!
Click to expand...
Click to collapse
Anyone with apk link problem as well?
Sent from my GT-N7000 using Tapatalk

watch_mania said:
Anyone with apk link problem as well?
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
no, works...
Did you discover any negative side effects on e.g. battery life?

eybee1970 said:
no, works...
Did you discover any negative side effects on e.g. battery life?
Click to expand...
Click to collapse
Well I just got the kernel module working by last night and the accessibility service earlier today. Not enough time to tell yet
Will try blinking it tonight and see how much battery it would drain
But you can always disable the bLED accessibility service when you don't need it
Sent from my GT-N7000 using Tapatalk

THANK YOU MAN !
This was such an anoying point that made me not love my Note !
Please keep developing, you are doing great work for all Note Users !
I hope MIUI and Cyanogen will make a Note-Port soon and integrate your LED Notification MOD

Hi guys I've installed but doesn't seem to be working I'm on rocket ROM and antes kernel and using go SMS can anyone help

brockyneo said:
Hi guys I've installed but doesn't seem to be working I'm on rocket ROM and antes kernel and using go SMS can anyone help
Click to expand...
Click to collapse
try switching to latest Abyss Kernel 2.0

eybee1970 said:
try switching to latest Abyss Kernel 2.0
Click to expand...
Click to collapse
Hi sorry I should of said I'm already on the abyss 2.0

reset
After installing everything looked ok in 5 minutes there was reset the phone :-(.
But otherwise good

Main concern:
How is the power management on this ?

PATLEN said:
After installing everything looked ok in 5 minutes there was reset the phone :-(.
But otherwise good
Click to expand...
Click to collapse
Which kernel and version are you using? Yes there circumstances where the mutex crashes the system. It happened once on my KKA, but never afterwards. I think I have to consider some other ways for doing semaphores for bLED

brockyneo said:
Hi sorry I should of said I'm already on the abyss 2.0
Click to expand...
Click to collapse
Ok the Abyss kernel had BLN mod patched on the melfas touchkey driver. You needs kernels with stock melfas touchkey driver, left intact. Seems that BLN is not functional yet on the Abyss kernel anyway? Maybe you can ask him to revert to original melfas touchkey driver from Samsung

i use this kernel
http://forum.xda-developers.com/showthread.php?t=1331784
directly:
http://forum.xda-developers.com/attachment.php?attachmentid=791221&d=1321958928

PATLEN said:
i use this kernel
http://forum.xda-developers.com/showthread.php?t=1331784
directly:
http://forum.xda-developers.com/attachment.php?attachmentid=791221&d=1321958928
Click to expand...
Click to collapse
That one is stock ones right? Then I believe it should work. But please post the results here

waste of time. It does not work!

ok, unfortunatly this Mod works with none of newer FM- and Abyss-Kernels....so we have to wait for the devs implementing stock touchkey drivers.
For all ROCKET ROM Users: of course you can switch to any CF-Root Kernel and this Mod will work - but you'll lose important init.d-tweaks if you do so, cause none of chainfires kernels support init.d-scripting

vuhongduong said:
waste of time. It does not work!
Click to expand...
Click to collapse
Well at least I wasted much more time than you did! But guess what, it worked on mine

[Official] LANIGHT for Captivate Q&A

I decided to create a new thread solely for Q/A and for people who are exeriencing issues running LANIGHT. Many issues can be solved by flashing different kernel/patch/fix/modem or going back to stock.
Try flashing DarkyRom RE: http://www.darkyrom.com/index.php?th...aptivate.6062/ (Captivate guide)
Then flash JB on it with proper instructions.

When an application crashes I get the option to close it or report the crash. When I click to report the crash it then says that the Play Store crashed. Is there a fix for this?

Still have ringtone issue
I installed 6.5 dd and all went well, but I still have the disappearing ringtone issue. Tried the fix and didn't work. I came from 4.2 dd. Any comments on how to try to fix this? This ROM is great.

Flip_RX said:
I installed 6.5 dd and all went well, but I still have the disappearing ringtone issue. Tried the fix and didn't work. I came from 4.2 dd. Any comments on how to try to fix this? This ROM is great.
Click to expand...
Click to collapse
Did you try flashing semaphore or flashing the rom with a complete wipe? People reported flashing the different kernel sometimes fixes it... Not sure if it's kernel related which is highly unlikely.
I ran the rom with no issues. I remember it was an issues back in 4.2DD but it was gone when i applied the fix... Not everyone that flashed reported that issue maybe that's why i never got serious about it.

Lockscreen wallpaper image?
is there a way to set a different wallpaper image to the lockscreen?
I can't seem to find this option in the Lanigh 6.5 rom.

Flip_RX said:
I installed 6.5 dd and all went well, but I still have the disappearing ringtone issue. Tried the fix and didn't work. I came from 4.2 dd. Any comments on how to try to fix this? This ROM is great.
Click to expand...
Click to collapse
Same here, but I have to confess that I made a dirty flash wiping dalvik cache only. I'll try to make a full wipe to see what happens.

AceofSpades90 said:
Did you try flashing semaphore or flashing the rom with a complete wipe? People reported flashing the different kernel sometimes fixes it... Not sure if it's kernel related which is highly unlikely.
I ran the rom with no issues. I remember it was an issues back in 4.2DD but it was gone when i applied the fix... Not everyone that flashed reported that issue maybe that's why i never got serious about it.
Click to expand...
Click to collapse
I followed instructions from the OP, full wipe 3 times...format individual system/data/datadata/cache/dalvik. Haven't tried semaphore, I like devil ever since team nyx's 4.0.3. With this ROM I have never had wifi issues, since v1. Besides the disappearing ringtones, gallery pictures also disappear just leaving online pics...no FC though. I use quikpic so no biggie.

Telpesoron said:
Same here, but I have to confess that I made a dirty flash wiping dalvik cache only. I'll try to make a full wipe to see what happens.
Click to expand...
Click to collapse
No luck. Actually it it's worse, since before flashing I had access to standard ringtones, those that come with the ROM, but not those which I created by myself. After flashing, all ringtones disappeared. Tried with the ringtones patch, but also no luck.
Next step, it's to find semaphore and flash new kernel. Any clue where I can download it?
Another repeating issue that occurs to me is the FC in the messages app.
EDIT: I've foud Semaphore and flashed it with Odin. I couldn't check if it solved the ringtone issue, since after apply this kernel, I had two severe issues: my screen rotated 90° to the right and the external-sd was not recognized. I've cleared cache, dalvik, fixed permissions and no luck.
Going back to 4.2 by now.
Sent from my SGH-I897 using xda app-developers app

Quick question how do i disable the led notifications, cant seem to find the setting (im probably blind )

BradleyR2010 said:
Quick question how do i disable the led notifications, cant seem to find the setting (im probably blind )
Click to expand...
Click to collapse
In devil kernel manager, go to misc tab (last 1 to the right) > scroll to the bottom, it's there.

BradleyR2010 said:
Quick question how do i disable the led notifications, cant seem to find the setting (im probably blind )
Click to expand...
Click to collapse
Uncheck "Backlight Notification" in the "Misc" tab if using Devil Kernel Config app. :thumbup:
Sent from my SGH-I897 using XDA

Loving the ROM so far. Finally decided that I don't need most of the customization options offered by other JB roms. however, I do miss the battery percentage. Any way to enable that, maybe through a theme or app?
EDIT: sneaky ba$terds, hiding it in the display options.... Looks awesome now. Found a new fav daily driver!

I installed new devil kernes 1.7.4VC and did not loose sound as others are posting. I wiped cache / dalvik & reboot recovery.
P.S. version 1.7.5 fixes the sound accourding the kernel thread.

Flip_RX said:
I installed new devil kernes 1.7.4VC and did not loose sound as others are posting. I wiped cache / dalvik & reboot recovery.
P.S. version 1.7.5 fixes the sound accourding the kernel thread.
Click to expand...
Click to collapse
I can confirm, 1.7.5 VC up and running beautifully. No sound issues whatsover. :thumbup:
Sent from my SGH-I897 using XDA

Lockscreen Custom Image .?.
ronkoni said:
is there a way to set a different wallpaper image to the lockscreen?
I can't seem to find this option in the Lanigh 6.5 rom.
Click to expand...
Click to collapse
I think this must be a common issue, I fixed this by plugging into my pc and safely removing the sd card. but next day same thing .?. I tried to apply a different lockscreen image and it wouldnt load images in gallery .?.
-btw, Love this Rom :highfive: ! It Is Fast. :Thanx Yo: :good:
In a week ive took a Captivate i897 from stock froyo 2.2 to cwmR to Devil kernel 1.6.1 <- which I really like. I first installed CM10 and was satisfied but got to reading around and flashed LAnight 6.5 DD last night (the proper way explained on thread). only played with it for a few hours and loved its speed. But today ran into problem with changing lock screen background image to custom image.
** is there a permanent fix for this, i dont always have my pc with me.
--Also noticed in both CM10 and LAnight 6.5DD, I can only turn on Bluetooth, is there a way to configure it like settings menu in stock froyo .?.
*edit, figured it out, long press WiFi or Bluetooth opens sub menu for settings, DuH. Im a Android Newb.

BradleyR2010 said:
Quick question how do i disable the led notifications, cant seem to find the setting (im probably blind )
Click to expand...
Click to collapse
You don't need to download Devil kernel manager if you don't want to. It's somewhere in the settings (different Lanight versions have it hidden in different places...).
Probably, under settings -> developer options
Or settings -> extras
Or settings -> tvout
Or there's a galaxy s app...
Maybe there are more places I hid it in different versions lol I had to move things and its as unorganized as my rom thread :/
ronkoni said:
is there a way to set a different wallpaper image to the lockscreen?
I can't seem to find this option in the Lanigh 6.5 rom.
Click to expand...
Click to collapse
I remember putting an option in 5.2 for that... Not sure where but it should be in 6.5?
A lot of custom things are hidden so you may have to find them...

BradleyR2010 said:
Quick question how do i disable the led notifications, cant seem to find the setting (im probably blind )
Click to expand...
Click to collapse
In 6.5 its under Settings/TV Out :thumbup:
Sent from my SGH-I897 using XDA

AceofSpades90 said:
I remember putting an option in 5.2 for that... Not sure where but it should be in 6.5?
A lot of custom things are hidden so you may have to find them...
Click to expand...
Click to collapse
I have searched every menu option under settings that i saw. i still cant find a way to set the lock screen image. could someone please point me in the right direction?

feature request
Hi
I know that is Q&A section
However I did not find feature request section
You ROM is naturally briliant! Thanks!
However could you please include Russian T9 letters in dialer in future releases?
Thank you very much in advance
Vladimir

Very weird problem when on lanlight (or any JB rom)
I installed V6.5DD using the exact method you wrote on the OP. I was coming from CM9, it booted up correctly and everything works great except three things: 1) i have no lock screen (it is checked) 2) I don't get any notifications, whatsoever(i can pull it down, but i hear an email or sms come in and nothing appears) 3) when i hold the home button the recent apps don't show.
I formatted everything again and re flashed, same exact problem.
What should i do? everything worked well on cm9
please help if you can.
I installed different JB roms and none worked.
I decided to go back to CM9, and guess what? none of those thing i outlined works.
It looks i have to odin back to stock. Can anyone please help me
sincerely,
Thatguy

[Q] Sony V add take Screenshot to power menu

hi , after i update my Stock rom from 4.1.2 to 4.3
i lose the take screenshot item in power menu and i really need it
i install some apps that create for take screenshot , but the add icon on screen or have timer and i dont like this
is there any patch or app that can install and add this item

Volume down and power at the same time, seems to work on the t
Sent from my LT30p using Tapatalk

neosnake991 said:
Volume down and power at the same time, seems to work on the t
Sent from my LT30p using Tapatalk
Click to expand...
Click to collapse
True.
Or just install Xposed framework and you can add the item inside the menu using Gravitybox or Advanced Power Menu.

neosnake991 said:
Volume down and power at the same time, seems to work on the t
Sent from my LT30p using Tapatalk
Click to expand...
Click to collapse
well thanks for saying this:good: , but i know this and it`s hard to use it specially when we are busy on other apps

istux said:
True.
Or just install Xposed framework and you can add the item inside the menu using Gravitybox or Advanced Power Menu.
Click to expand...
Click to collapse
thanks so much , your advice seems exactly what i want
i`m not fear of installing and testing but Xposed framework and Advanced Power Menu both write warning about boot loop or soft-break after install
http://forum.xda-developers.com/showthread.php?t=2404042
http://forum.xda-developers.com/xposed/framework-xposed-rom-modding-modifying-t1574401
and the Sony V is not on the Confirm Device list , so do you think it cost to install them ?
of cource i must decided at end but i want to know the % of risk for adding only one item to power menu ( take screenshot !)

Arioman said:
thanks so much , your advice seems exactly what i want
i`m not fear of installing and testing but Xposed framework and Advanced Power Menu both write warning about boot loop or soft-break after install
http://forum.xda-developers.com/showthread.php?t=2404042
http://forum.xda-developers.com/xposed/framework-xposed-rom-modding-modifying-t1574401
and the Sony V is not on the Confirm Device list , so do you think it cost to install them ?
of cource i must decided at end but i want to know the % of risk for adding only one item to power menu ( take screenshot !)
Click to expand...
Click to collapse
I'm sure that Xposed works on V without any issue (in mods section there are people with V that use it).
Actually I don't know in specific if APM could give problem, but I can only say that on my T it works as a charm....
The good thing of Xposed framework is that it doesn't change and doesn't touch the system in any way, because it works on it: if something doesn't work properly and you get bootloop, you can just go into recovery and disinstall the framework using the zip generated automatically in your internal memory when you install Xposed for the first time.

istux said:
I'm sure that Xposed works on V without any issue (in mods section there are people with V that use it).
Actually I don't know in specific if APM could give problem, but I can only say that on my T it works as a charm....
The good thing of Xposed framework is that it doesn't change and doesn't touch the system in any way, because it works on it: if something doesn't work properly and you get bootloop, you can just go into recovery and disinstall the framework using the zip generated automatically in your internal memory when you install Xposed for the first time.
Click to expand...
Click to collapse
thanks
only one question , which one Gravitybox or Advanced Power Menu is better and have more compatibility and less error ?

Arioman said:
thanks
only one question , which one Gravitybox or Advanced Power Menu is better and have more compatibility and less error ?
Click to expand...
Click to collapse
I have yet to see a phone on which Xposed doesn't work or has bricked the device. If all you want is that feature, install Advanced Power Menu, no need to use GravityBox which does way more than what you want.

Antiga Prime said:
I have yet to see a phone on which Xposed doesn't work or has bricked the device. If all you want is that feature, install Advanced Power Menu, no need to use GravityBox which does way more than what you want.
Click to expand...
Click to collapse
Totally agree.
APM is specific for power menu.
Gravitybox is a huge tool to change almost everything, I love it... but if you want only to change the power menu, APM is enough

It did blow my 4.3 when it just came out, but I am sure this is fixed and 4.3 fully adopted.
I admitt it is extremely convenient with Xposed, and having with Gravitybox is so attractive for being offered so much choices right on the plate. Albeit I think it slows the system. And a major issue for me, it does not work on odexed ROMs.
I pity the culture of installing real apk's has somewhat diminished through using these modules.

peter-k said:
I pity the culture of installing real apk's has somewhat diminished through using these modules.
Click to expand...
Click to collapse
Interesting, do you know of any real standalone APKs that offer functions that could replace what's done with Xposed? I'm asking because, why use Xposed when there might be real APKs that do the trick, say hooking into calls made be SystemUI to change things on the fly...

just wana say thanks and Declaration that they work perfect on Sony V Rom 4.3 build .210 rooted
thanks for all :good:

[Discontinued][Rom][VZW_G935U_PI3_PlayStore_Rom][Working_Wifi_Calling_VVM]

Why call this rom the PlayStore Rom? Because this rom features absolutely nothing, thats the beauty of it! If you want something your going to have to get it from the PlayStore. You can customize it any way you want. The rom boots and you can make a phone call and get on the playstore thats about it. So have fun! ​
Features
Google Dialer and Google Contacts
S7 Camera
Google Launcher
Samsung Gallery Left so Lockscreen Wallpaper can be changed
Google Now
Google Maps
Verizon Visual Voicemail
L Speed (for tweeks and other stuff)
Thats It No More! Dont Ask Thats why its called the Playstore Rom. If you want it download it!
Bugs
Alot of things will not work or may FC in settings. This is because it is removed. Deal with it!
Install Instructions For PI3 International Firmware
Note about new rom
This will require you to reinstall The PEH firmware and reroot. Once done The new rom will flash files not a system.img any more. The zip file will be alot smaller. I think this will also help on the MMS problem for some people, as the system partition was getting messed up during multiple flashes of system.img images
Recommended you be on PH1 or PI3 firmware and Rooted
Install Flashfire
G930U_PEH_Deodexed_BS_Free_Rom.zip on internal or sdcard
Open FlashFire and agree to terms
Click the + button in the actions menu
Click Flash Zip or OTA and locate VZW_G935U_PI3_DEODEX_AROMA_V1.zip_Rom.zip and click on it
In Options menu leave the box Mount/system read/write checked and click the check mark in the top right corner of options menu to flash this rom
Leave EverRoot disabled
Leave reboot menu set to normal
Click On The Big Flash Box at Bottom With the Red lightning bolt to flash rom
This zip will wipe data but not internal storage
View attachment 3814934
Downloads
VZW_G935U_PI3_DEODEX_AROMA_V1.zip
Change Log
V2
Zip flashes files now no more system.img
Added root essentials which includes a root browser and lots of other cool features.
Added force doze which will increase battery life by up to 40 percent,
Added Adaway for add blocking
Updated FlashFire to V52
Includes Previous Fix
Post Install Instructions
You must decide if you want to use Google IncallUI or Samsung InCallUI. Samsung InCallUI will allow too still receive and switch to video calls and the google IncallUI will only support HD calling. To switch to google IncallUI goto settings/applications click on default applications choose calling app and click on the blue phone app. To switch back to samsung IncallUI is a little more complicated. You will need an app like root explorer and goto data/system/users/0 and then findthe setting_secure.xml and delete and then restart phone. This will restore samsung IncallUI as default
You will also want to turn edge features off since everthing is deleted
Also you need to goto SuperSU app and goto settings and click on enable su during boot and also click trust system users
Goto this thread and under Recommended Next Steps find the S7_or_S7Edge_Fixes_V15.zip or latest version and flash to fix kernel lage and doze fix.
Goto setting/about phone
Click on build number 5 times to enable developer options
Change animation and duration scales to .05 this will speed up phone
You will also have to change charging/file mode from within developer options
Remember Wiping Dalvik cache will cause phone to take up to 10 min to boot on deodexed roms

If using samsung IncallUI here is a fix for call phone FC and also location service fix
Phone_Fix_Misc_Fix.zip

Another! Is this that different from your other?
Sent from my SM-G935V using Tapatalk

markwebb said:
Another! Is this that different from your other?
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
Of course it is different read the OP

Yes I can read. Sorry to support you.
Sent from my SM-G935V using Tapatalk

@jkruse Thanks bro appreciate your efforts. One favor, do you know where the Olympic theme is located on your first Rom? (Which folder?) I'm going to extract it from the other version and install it in this one. For some reason its not on the Samsung theme store.

markwebb said:
Yes I can read. Sorry to support you.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
I didnt mean for my reply to come across rude. I just thought since the OP looks like the other one you thought it was the same. This is basically nothing but a bootable rom with like 5 apps installed thats it there are over 180 running apps removed. I kind of thought it would be cool to be able to build your rom how ever you want it without having to worry about what you can delete and what you cannot. I appreciate the support especially on new development. Understand I have many threads and and other devices so i sometimes keep my answers short and direct especially when using the mobile app which I hate using.

jrkruse said:
I didnt mean for my reply to come across rude. I just thought since the OP looks like the other one you thought it was the same. This is basically nothing but a bootable rom with like 5 apps installed thats it there are over 180 running apps removed. I kind of thought it would be cool to be able to build your rom how ever you want it without having to worry about what you can delete and what you cannot. I appreciate the support especially on new development. Understand I have many threads and and other devices so i sometimes keep my answers short and direct especially when using the mobile app which I hate using.
Click to expand...
Click to collapse
Real talk you're an awesome dev

jrkruse said:
I didnt mean for my reply to come across rude. I just thought since the OP looks like the other one you thought it was the same. This is basically nothing but a bootable rom with like 5 apps installed thats it there are over 180 running apps removed. I kind of thought it would be cool to be able to build your rom how ever you want it without having to worry about what you can delete and what you cannot. I appreciate the support especially on new development. Understand I have many threads and and other devices so i sometimes keep my answers short and direct especially when using the mobile app which I hate using.
Click to expand...
Click to collapse
Ok, that is what I thought. I just was trying to determine if there was anything else major missing from that other ROM, knowing some apps would have to be pulled or installed, hence your "Playstore" moniker for this ROM. Ok, this is a good clean base ROM for those who like to order "a la carte" down the road when the need for other features are required. I may give it a spin for the fun of it.
Cool! We are good.

sweet idea

Inb4 crazy high battery stats

Just finished flashing about 4 minutes ago. Still suck on the white SAMSUNG logo. Is this normal?
UPDATE: Took like 8 minutes to boot. Runs fine.

Downloading now. Been waiting for something like this. Cheers.

ShadowyStorm said:
Downloading now. Been waiting for something like this. Cheers.
Click to expand...
Click to collapse
Super smooth. Thank you good sir.

If using samsung IncallUI here is a fix for call phone FC and also location service fix for apps not asking proper permission
Phone_Fix_Misc_Fix.zip

Should we flash this either way?

bickfordman said:
Should we flash this either way?
Click to expand...
Click to collapse
I'm using the Google incall with no issues at all. Probably no need to flash if that's what you're using.

So far the ROM is nearly perfect.
Having some MMS issues again. It only works when Wifi is turned off or not connected to a network.
Any assistance would be greatly appreciated. I even flashed your fix it ZIP.

Hey I'm considering installing this ROM because I live the minimalism of it. How's the performance? Anyone mind posting an AnTuTu score?

Syn Ack said:
So far the ROM is nearly perfect.
Having some MMS issues again. It only works when Wifi is turned off or not connected to a network.
Any assistance would be greatly appreciated. I even flashed your fix it ZIP.
Click to expand...
Click to collapse
I actually found one of the battery saver apps to be causing the issue. I think it was amplify through xposed, it caused the mobile data to turn off when connected to wifi. So, i turned it off and haven't had an issue since.

Delete

:good:Thank you for the hard work

vlad3647 said:
:good:Thank you for the hard work
Click to expand...
Click to collapse
Naaaa...Tanks to @pduper:silly:

Many thanks to you @luisgonzales1977 for your work.
sm-g900i
Formatted and advanced cleaned
Installed Bliss-v12.2-klte-UNOFFICIAL-20200128 and open_gapps-arm-10.0-pico-20200124 together
Rom is very nice.
I have noticed that audio levels are low and device lags while in settings menu.
Anyone else experiencing this?

pmduper said:
Many thanks to you @luisgonzales1977 for your work.
sm-g900i
Formatted and advanced cleaned
Installed Bliss-v12.2-klte-UNOFFICIAL-20200128 and open_gapps-arm-10.0-pico-20200124 together
Rom is very nice.
I have noticed that audio levels are low and device lags while in settings menu.
Anyone else experiencing this?
Click to expand...
Click to collapse
yes...I installed earlier and I think its the best of the new Android 10 Roms for our device....I installed the Intelli Kernel and raised the volume levels....the lag in settings is a pain... I noticed the gear on the footer of quick settings wont work unless you bring the pull down all the way out....My guess is an overlay is probably in conflict with the system ui

Test Build Upload ...
Download.

luisgonzales1977 said:
Test Build Upload ...
Download.
Click to expand...
Click to collapse
Would love to test this but very happy with your other test build MSM Xtended that I have been using it all day with no problems..thanks again for the work you are putting into these roms

Fonts not working correctly...not all the phone and all the apps are fonted with my selected font in settings..sound to low..i cant hear anything when call or when receive some notification...and why no one cant fix connect headsets?...all android 10 mods have same problems..like copy pasted and changed ui only

Skerleton said:
Fonts not working correctly...not all the phone and all the apps are fonted with my selected font in settings..sound to low..i cant hear anything when call or when receive some notification...and why no one cant fix connect headsets?...all android 10 mods have same problems..like copy pasted and changed ui only
Click to expand...
Click to collapse
You have to know that android 10 is Beta Stage. If you don't want to face these bugs, you can simply go back to LOS 16, which is stable.
Bluetooth problem is always issue since LOS 15.1, so you'd better not expect to fix it in few days only.
See curiousrom's post that says you should don't press devs to fix these issues since they do volunteering. Therefore, if you keep this attitude, you will be sad because no one will develop any roms then.

SmgKhOaRn said:
You have to know that android 10 is Beta Stage. If you don't want to face these bugs, you can simply go back to LOS 16, which is stable.
Bluetooth problem is always issue since LOS 15.1, so you'd better not expect to fix it in few days only.
See curiousrom's post that says you should don't press devs to fix these issues since they do volunteering. Therefore, if you keep this attitude, you will be sad because no one will develop any roms then.
Click to expand...
Click to collapse
Lineage os is ****..best pie os is DOT OS 3.1

Skerleton said:
Lineage os is ****..best pie os is DOT OS 3.1
Click to expand...
Click to collapse
Wrong thread mate. Take your disrespectful comments elsewhere!!

Skerleton said:
Fonts not working correctly...not all the phone and all the apps are fonted with my selected font in settings..sound to low..i cant hear anything when call or when receive some notification...and why no one cant fix connect headsets?...all android 10 mods have same problems..like copy pasted and changed ui only
Click to expand...
Click to collapse
Oh no!! And on top of all that mummy didn't give you any lunch money! I feel for you my friend, I really do. It must be so tough going through life with no respect for anyone, especially when they are working hard and free of charge to bring your aging device up to date, God that sucks doesn't it.l?! Tell you what, you go and enjoy your pie and the grown ups will come and let you know when all these iddy biddy widdle bugs have gone.

I can't download the link, because the file was deleted.
Who can give me a download link?
Thanks!

Access denied where can I download the rom?

n_boy86 said:
Access denied where can I download the rom?
Click to expand...
Click to collapse
Try this link ?
https://qc5.androidfilehost.com/dl/...3197/Bliss-v12.2-klte-UNOFFICIAL-20200130.zip

I expected many Problems when migrating to a q Rom. Waited until today and started with Bliss.
And all i can say is that this Rom is awesome in responsiveness and Options. Everything is working so far. Only Thing is that there is no selinux set for now.
But that is okay. Everything else just works amazingly good!
Phone (with Recorder outofthebox), Camera, all Google Apps, WiFi, Mobile Data, Magisk
Also my 128g sd was set up as adopted storage and uses f2fs by Default. Nice!
Not a single glitch or freeze.
Will consider using this as my daily Driver.
Coming from LineageOS16
Big thanks to the devs from bliss project and OP of this Thread!!!!

Thinking about formating my DATA and CACHE also as F2FS. Would that Work and is that a good Idea? What do you think? More over is it possible to use also System as F2FS with Bliss?
Would really appreciate it.
And i found a little bug with gboard. There is a little unused space between my navbuttons and the bottom of my gboard. Is there an Option to Change that?
Thanks

ajox said:
Thinking about formating my DATA and CACHE also as F2FS. Would that Work and is that a good Idea? What do you think? More over is it possible to use also System as F2FS with Bliss?
Would really appreciate it.
And i found a little bug with gboard. There is a little unused space between my navbuttons and the bottom of my gboard. Is there an Option to Change that?
Thanks
Click to expand...
Click to collapse
I think its better to change only cache partition because f2fs is unstable due to our kernel version.
when I used this rom with tuned kernel, f2fs all, apps stopped frequently so I had to reboot a lot of time. This is just my opinion.
You have to disable gesture navigation bar to remove that blank.

SmgKhOaRn said:
I think its better to change only cache partition because f2fs is unstable due to our kernel version.
when I used this rom with tuned kernel, f2fs all, apps stopped frequently so I had to reboot a lot of time. This is just my opinion.
Click to expand...
Click to collapse
Did You try that with intelli Kernel, too? But as you said the rom is generally capable to usw F2FS formated system Partition right?
Think i will give it a chance this weekend.
SmgKhOaRn said:
You have to disable gesture navigation bar to remove that blank.
Click to expand...
Click to collapse
Thought about something like that. Anyway i dont find such setting... Maybe iam blind?

ajox said:
Did You try that with intelli Kernel, too? But as you said the rom is generally capable to use F2FS formated system Partition right?
Think i will give it a chance this weekend.
Thought about something like that. Anyway i dont find such setting... Maybe iam blind?
Click to expand...
Click to collapse
IDK since I don't like that kernel...
I didn't tested on this rom (using other Q rom now) so You can try and tell about the results... (Backup data first, don't need it on cache if you want...)
Just search it in setting's search section (type gesture if you can't find)...
Or remove qemu.hw.mainkeys=0 in build prop...
Can't use f2fs in System partition lol...
It will force to install as ext4 even you format it to f2fs...
This is all same in other roms...