||!! TRY AT YOUR OWN RISK !!||
My revo have been running on this v6 supercharger script for a few days and I really like it. I'm on GingerVolt 1.0 rom and love it but after i use the v6 supercharger script on it, it actually made it run much smoother and quicker.
Here's the link for you to grab the file you need and it gives you lots of info on it too
this the file you'll download " V6_SuperCharger_for_Android-update8.sh.txt "
http://forum.xda-developers.com/showthread.php?t=991276
This link give you more detail instructions with pic on how to run it
http://forum.xda-developers.com/showthread.php?t=1126940
This link also give you instructions on how to use the script but main thing is it also tell you how you can make it stick even after every reboot
http://www.cl.ly/0C2d3R3i3q3i2u1t0i2W
You want it to run properly make sure you have BusyBox v1.18.2 installed. For some reason it works much better than older versiosn or newer versions
Thanx zeppelinrox who created the V6 SuperCharger script
also Thanx to zeppelinrox and MalarKeY007 for posting
Good Luck
||!! TRY AT YOUR OWN RISK !!||
I SuperCharger my GingerVolt
Thank you! There is an update 9 btw.
And thank you for the help! It is working now!
Only thing i didn't do was run script at boot cuz it said not too in the script itself
GingerVolted Revolution powered by MTM
revo_65 said:
Haha thank you. I'm using busy box 1.16.2 and there is an update 9
GingerVolted Revolution powered by MTM
Click to expand...
Click to collapse
i wouldn't recommend using newer version other than busy box 1.18.2 which is recommend by zeppelinrox
hope you get to fix your issue with the script
bhp117 said:
i wouldn't recommend using newer version other than busy box 1.18.2 which is recommend by zeppelinrox
hope you get to fix your issue with the script
Click to expand...
Click to collapse
Yes I did. And thanks again for your help
Supercharged GingerVolt
Sweet! How did I not know this existed??
borborpa said:
Sweet! How did I not know this existed??
Click to expand...
Click to collapse
i found this by looking for ways to improve the revo ram since we just have 370mb free and notice it keep on running out with all the apps i have and bogs down the system.
will this work on stock rooted gb
revo_65 said:
Thank you! There is an update 9 btw.
And thank you for the help! It is working now!
Only thing i didn't do was run script at boot cuz it said not too in the script itself
GingerVolted Revolution powered by MTM
Click to expand...
Click to collapse
you're welcome
how's you're revo running after supercharged?
not sure if you have the same issues i had before and after root/gingervolt
issues i had is when the soft key don't turn on unless i have the revo set to auto brightness
and sometime the screen freeze when i mutitask and go back to home screen this mainly happened on stock vz7 or rooted but once i flash GingerVolt it happen much less but still freeze once in awhile
after i supercharge it those 2 issues is gone, my soft key lights up each time i unlock and it don't freeze on me anymore
i even notice it switch very quickly whenever i go back to home screen or even whenever i switch to different apps/games
b_wat said:
will this work on stock rooted gb
Click to expand...
Click to collapse
yes it does
it even works on rooted vz4 and revolt 1.5, i had it for a few days before gb is out
and it works great.
i'm not sure about rooted vz6 because i haven't try it but from the original links about this mod it says its compatible to any rooted android firmware/rom so i would assume it'll work too
wow i am impressed at the noticeable difference in screen transition,opening and closing of apps everything is faster and smoother i love it
b_wat said:
wow i am impressed at the noticeable difference in screen transition,opening and closing of apps everything is faster and smoother i love it
Click to expand...
Click to collapse
Did you flash GingerVolt?
SuperCharged GingerVoltB-) R U?
nope i am stock rooted gb
b_wat said:
nope i am stock rooted gb
Click to expand...
Click to collapse
What setting you using?
I'm running Mega ram 1
Make the revo run like a champ
SuperCharged GingerVoltB-) R U?
bhp117 said:
What setting you using?
I'm running Mega ram 1
Make the revo run like a champ
SuperCharged GingerVoltB-) R U?
Click to expand...
Click to collapse
I am not sure i just ran the script and hit option 7
b_wat said:
I am not sure i just ran the script and hit option 7
Click to expand...
Click to collapse
Good pick, I was using that multi task setting for awhile
SuperCharged GingerVoltB-) R U?
Yeah, I suggest trying out each one. You might find one that's geared to the way you use your phone.
bhp117 said:
you're welcome
how's you're revo running after supercharged?
not sure if you have the same issues i had before and after root/gingervolt
issues i had is when the soft key don't turn on unless i have the revo set to auto brightness
and sometime the screen freeze when i mutitask and go back to home screen this mainly happened on stock vz7 or rooted but once i flash GingerVolt it happen much less but still freeze once in awhile
after i supercharge it those 2 issues is gone, my soft key lights up each time i unlock and it don't freeze on me anymore
i even notice it switch very quickly whenever i go back to home screen or even whenever i switch to different apps/games
Click to expand...
Click to collapse
Seems to be a lot smoother and snappier. I had the soft key issue once right after initial reboot with the script otherwise no problems since.
Does seem to be much smoother though. Was eyeing that supercharger thread for awhile, glad I finally tried it.
I'm just running balanced now
Supercharged GingerVolt
I can't seem to find the help file that will tell me what the each of the options are. Anyone have an idea?
Seems like it makes my battery run at a higher temp
Supercharged GingerVolt
Forgive the vague question, but what exactly does this script change? That is, how is my phone being "super charged"?
Thank ya
---
Sent from my Fusion-Powered Revolting Revolution using xda premium -- Powered by mtmichaelson and spc_hicks: Join the Revoltution!
Related
Post and Files Removed because they did not work.
I thought JIT would only work on Froyo? Would this work on any rom?
Edit: also will this work with the different lag fixes that are out there?
Thanks
oquinones said:
I thought JIT would only work on Froyo? Would this work on any rom?
Click to expand...
Click to collapse
Not any more! This is compiled for 2.1
You got a linpack score you could provide us with?
We could use a tested undo as well. JIT for 2.1 on the G1 caused all kinds of problems.
oquinones said:
I thought JIT would only work on Froyo? Would this work on any rom?
Edit: also will this work with the different lag fixes that are out there?
Thanks
Click to expand...
Click to collapse
no if i remeber jit was in 2.1 but wasnt complete so it was never used but in froyo it was complete but needed to be activated. when i was in the 32b section i used jit on all the 2.1 sense roms and it made my phone fly and that was a far more inferior phone than the vibrant so i cant wait to see what this does to our phones!!!
will keep an eye on this one!! pls report if working or not..
Care to source a thank you to creators of JIT so noobs like me can research what exactly this is ;p
phragg said:
Care to source a thank you to creators of JIT so noobs like me can research what exactly this is ;p
Click to expand...
Click to collapse
http://en.wikipedia.org/wiki/Just-in-time_compilation
oquinones said:
I thought JIT would only work on Froyo? Would this work on any rom?
Thanks
Click to expand...
Click to collapse
JIT was announced in alpha quality for 2.0, so I suspect the 2.1 ver is workable. Not necessarily 100% stable (or they'd have released it standard instead of waiting until 2.2) but workable..
I'll prolly give this a shot tomorrow, can't be too bad
Ok thanks for clearing that up guys. Shows how much of a newb I am to Android. This is my 2nd Android phone and my 1st one was a Behold 2...
I am making a backup now and will flash this and report back.
I'm creating a nandroid and installing this now. I'll post up quadrant and linpack scores. I'm currently runnining RyanZA's lag fix, so I'm getting quadrant scores around 2050 right now.
oquinones said:
Ok thanks for clearing that up guys. Shows how much of a newb I am to Android. This is my 2nd Android phone and my 1st one was a Behold 2...
I am making a backup now and will flash this and report back.
Click to expand...
Click to collapse
lol well the behold 2 doesnt count so this is your first real android phone lol j/k but this phone kills the crap out of the behold with a bazooka
kaizasoshi said:
You got a linpack score you could provide us with?
Click to expand...
Click to collapse
This was my Stock Linpack:
2010-08-15 20:47:30 the3dman / Chicago 8.042 SGH-T959 1000.0MHz Samsung/SGH-T959/SGH-T959/SGH-T959:2.1-update1/ECLAIR/UVJFD:user/release-keys
My Linpack with JIT is the photo below.
Not a huge difference according to linpack but things seem to definitely run faster.
the3dman13 said:
This was my Stock Linpack:
2010-08-15 20:47:30 the3dman / Chicago 8.042 SGH-T959 1000.0MHz Samsung/SGH-T959/SGH-T959/SGH-T959:2.1-update1/ECLAIR/UVJFD:user/release-keys
My Linpack with JIT is the photo below.
Not a huge difference according to linpack but things seem to definitely run faster.
Click to expand...
Click to collapse
i dont think linpack can justify anything cause i could get 7.2 constantly on my mt3g running a sense rom with jit and it was ok but no where near as fast as this phone...
the3dman13 said:
This was my Stock Linpack:
2010-08-15 20:47:30 the3dman / Chicago 8.042 SGH-T959 1000.0MHz Samsung/SGH-T959/SGH-T959/SGH-T959:2.1-update1/ECLAIR/UVJFD:user/release-keys
My Linpack with JIT is the photo below.
Not a huge difference according to linpack but things seem to definitely run faster.
Click to expand...
Click to collapse
Thanks for supplying us with this...gonna flash in a bit
cashless said:
We could use a tested undo as well. JIT for 2.1 on the G1 caused all kinds of problems.
Click to expand...
Click to collapse
looks like it only replaces 3 or 4 files:
build.prop
/system/bin/dalvikvm
/system/lib/libdvm.so
/system/lib/libnativehelper.so
so if you want to flash before there's a .zip file revert, just back those up using adb pull or cp/mv before you flash, or just pull them out of a stock rom zip file from the forums
going to flash now..
cheers =)
s0niqu3 said:
looks like it only replaces 3 or 4 files:
build.prop
/system/bin/dalvikvm
/system/lib/libdvm.so
/system/lib/libnativehelper.so
so if you want to flash before there's a .zip file revert, just back those up using adb pull or cp/mv before you flash, or just pull them out of a stock rom zip file from the forums
going to flash now..
cheers =)
Click to expand...
Click to collapse
I didn't bother making an undo on this one because I figured everyone would make a nandroid backup.
12 minutes and still at the vibrant screen how long does it take?
the3dman13 said:
I didn't bother making an undo on this one because I figured everyone would make a nandroid backup.
Click to expand...
Click to collapse
Oh, I'm with you, if people are smart enough to know about JIT and want to flash it, they should be smart enough to backup their phone first. I'm so tired of everyone complaining about not knowing how to use adb, or terminal, and yet wanting to hack their phones. This is the development forum and not helpdesk, right?
nandroid backup almost done, flashing as soon as it finishes, thanks again!
cheers
=)
Can the "old-tv" screen animation be ported to cm6 ?
It has been tried earlier. It seems to be very difficult.
Sent from my A853 using Tapatalk
sileshn said:
It has been tried earlier. It seems to be very difficult.
Sent from my A853 using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply. All in all gingerbread is great but to my personal experience it's not that snappy like froyo. I'm using launcher pro plus as home replacement and in froyo I managed to set it so I wont get redraws when closing the browser or other application that needs a lot of ram.
Note: I disabled JIT
In gingerbread with the same settings of launcher pro I get redraws. I tried with jit disabled, enabled, vmheap 32,40 and it's the same.
Is it something that I'm missing out?
If it werent for this everything would be great about this rom!
Yes. I agree. I do not see much advantage in using GB to Froyo as of now. If only we could port the screen off CRT animation to Froyo, it would have been great. But it seems to be built deep into the framework. Check this link.
I had the problems you mentioned with the CM7 alpha release and IceandFire ROM.
Whereas on Shadowmod and Hobomod , the phone is seriously zippy! The latter being slightly better!
sileshn said:
Yes. I agree. I do not see much advantage in using GB to Froyo as of now. If only we could port the screen off CRT animation to Froyo, it would have been great. But it seems to be built deep into the framework. Check this link.
Click to expand...
Click to collapse
Thanks...Let me check it.
bloodhawk said:
I had the problems you mentioned with the CM7 alpha release and IceandFire ROM.
Whereas on Shadowmod and Hobomod , the phone is seriously zippy! The latter being slightly better!
Click to expand...
Click to collapse
Really. I will try them and report back later No need to wipe anything when moving from CM7 to Shadow or Hobo right?
A full Data/factory reset is advised at least thats what i did.
I did 2 Wipes from the stock recovery and then 3 wipes from Androiddiani OR 3.3.
vladstercr said:
Thanks...Let me check it.
Really. I will try them and report back later No need to wipe anything when moving from CM7 to Shadow or Hobo right?
Click to expand...
Click to collapse
I would reccomend wiping before moving to either rom (just to be safe), though you won't need a wipe for moving between my mod and shadow and vice versa.
Also, if you can wait about 7 hours, I should have a new version of hobomod up
Sent from my A853 using XDA App
mystichobo said:
I would reccomend wiping before moving to either rom (just to be safe), though you won't need a wipe for moving between my mod and shadow and vice versa.
Also, if you can wait about 7 hours, I should have a new version of hobomod up
Sent from my A853 using XDA App
Click to expand...
Click to collapse
good...i will wait for yours then!
It seems that the guys dont work anymore on putting the CRT animation into FROYO. I mean it would be great but it's pretty difficult to do it because it's very well coded inside the framework, something like that.
Froyo? Wait a minute... Oh, yes Froyo! You mean that ancient Android version that will not receive any more fixes and enhancements... Hmm, Froyo. OK, enjoy it.
kabaldan said:
Froyo? Wait a minute... Oh, yes Froyo! You mean that ancient Android version that will not receive any more fixes and enhancements... Hmm, Froyo. OK, enjoy it.
Click to expand...
Click to collapse
Come on, Gingerbread is nowhere near perfect yet on Milestone
As for animations, everyone who attempted it indeed failed, its probably possible but hard.
kabaldan said:
Froyo? Wait a minute... Oh, yes Froyo! You mean that ancient Android version that will not receive any more fixes and enhancements... Hmm, Froyo. OK, enjoy it.
Click to expand...
Click to collapse
what fixes or enhancements to further receive Froyo! You made it fly It cant get any better than is! Thank You!
kabaldan said:
Froyo? Wait a minute... Oh, yes Froyo! You mean that ancient Android version that will not receive any more fixes and enhancements... Hmm, Froyo. OK, enjoy it.
Click to expand...
Click to collapse
hahaha, I wish XDA had a "Like" button.
kabaldan said:
Froyo? Wait a minute... Oh, yes Froyo! You mean that ancient Android version that will not receive any more fixes and enhancements... Hmm, Froyo. OK, enjoy it.
Click to expand...
Click to collapse
Touché!
SENT FROM MY MILESTONE POWERED BY GINGERBREAD
Hello ppl, just wanted to ask if anyone has managed to install v6 supercharge with GingerDX ROM.
Every time i try i end up bricking my phone. I think the problem is the busybox but i am not sure. I do a clean install of GD13 from stock ROM and then i root my X8. since the supercharged script needs busybox 1.18.2 or lower, i install it, but then when i reboot, my phone stucks at SE logo.
Yes, i have. But, just follow the instructions in this thread to get the equivalent of supercharger working on yoyr phone.
http://forum.xda-developers.com/showthread.php?t=1212396
i finally made it and installed supercharged on my x8 with GDX13....to be honest i dont see much difference.
my free memory is always stuck on 35-40MB which i find it to be extremelly low
gxaris said:
i finally made it and installed supercharged on my x8 with GDX13....to be honest i dont see much difference.
my free memory is always stuck on 35-40MB which i find it to be extremelly low
Click to expand...
Click to collapse
You have low memory because of a lot installed apps ... Try to remove some and see the difference
thanks for reply i have 3-4 apps installed and 2 widgets the apps are alll to the sd. i got used to the idea of low mem so i have compromised
Sent from my X8 using xda premium
Update: i chose Aggressive 1 as supercharged script. The first time i rebooted, my phone was stuck at SE logo. After restoring it using SEUS and installing GDX13 again, i ran superscharged Aggressive 1 again and it worked. Now i have 45-50MB free at all time and my phone behaves better
DUDE! When u solved your problem, please post the solution. Not giving feedback of V6.
The solution we want..
zhuhang said:
DUDE! When u solved your problem, please post the solution. Not giving feedback of V6.
The solution we want..
Click to expand...
Click to collapse
My experience with supercharger and gdx v013 is posted here
i'm come from the milestone (droid 1), and i know the v6 supercharger by zeppelinrox who made my old phone very fast....and i do it on my new droid 3.....and whaooooo, really more faster, no lag, a real big multitask and 210mb free
Why the dev do not includ this in their rom ?
some links for to do the method:
http://forum.xda-developers.com/showthread.php?t=991276
the image method (that's very easy with this)
http://forum.xda-developers.com/showthread.php?t=1126940
all thanks to zeppelinrox for the script and many other, and to MalarkeY007 for the picture tuto.
Enjoy
I think it's included in monster rom
DoubleYouPee said:
I think it's included in monster rom
Click to expand...
Click to collapse
i don't know, but you can test it by apply the script, and there's an option without install supercharger, just show all the values
I thought this script was not safe to run, from previous posts?
-smc
somemadcaaant said:
I thought this script was not safe to run, from previous posts?
-smc
Click to expand...
Click to collapse
Make sure you are running busybox 1.18.2 and you should be fine
Sent from my rooted xt860
**** then ill give it a go, thanx.
-smc
somemadcaaant said:
**** then ill give it a go, thanx.
-smc
Click to expand...
Click to collapse
Newer busybox versions cause issues
Sent from my rooted xt860
ive ran it on different roms along with his 3Gturbo but did not score higher on any benchmarks while using monster or liberty.
Hey. Ive been using Slim ics ROM for 2-3 weeks now, im loving the speed, looks, and all.. but i have one question: My free RAM is usually around 120MB but if my phone is on for 3-5 days straight it starts to lag a bit while free RAM drops to around 70MB, a restart clears everything and its snappy again with free RAM at 120-170MB, so my question is, is there an app or script that will basically do the same thing than rebooting without actually rebooting?
BTW: how do i thank people on the forum? I wanna thank the SlimICS developer!
PS. If it helps im on:
Slim ICS 4.2 with Semaphore 1.3.0s kernel
Semaphore tweaks:
Smartass V2
Smooth UI
Deep idle
Bigmem
Get SuperCharger V6 tweaks.
sent from the SGS TITAN and stuff
Fast Reboot does exactly what your asking for.
Helloworld294 said:
Get SuperCharger V6 tweaks.
sent from the SGS TITAN and stuff
Click to expand...
Click to collapse
Okay, i have been reading about that script for a week or so now, but have been afraid to install.. because of these questions: now that i have some scripts installed via semaphore manager , should i remove all the files from init.d before i attempt to install Supercharger v6? Or can i just install without worrying?
Another thing is, ive understand that i can choose the scripts i want to enable when installun Supercharger , right? So which ones do you recommend to enable?
Thx alot.
Vertron said:
Fast Reboot does exactly what your asking for.
Click to expand...
Click to collapse
Yea, but the idea was that i wanted a script/that basically does the same procedure automatically, which Supercharger V6 apperantly does(?)
Mongopusher42 said:
Yea, but the idea was that i wanted a script/that basically does the same procedure automatically, which Supercharger V6 apperantly does(?)
Click to expand...
Click to collapse
Get Fast Reboot Pro then. That has an option to make it run automatically.
Where is the thread for the Supercharger V6 script? Not heard of that one before.
Vertron said:
Get Fast Reboot Pro then. That has an option to make it run automatically.
Where is the thread for the Supercharger V6 script? Not heard of that one before.
Click to expand...
Click to collapse
Aah ok, thx for that! But i started using the Supercharger script and works like a charm, i RECOMMEND.
Heres the LINK: http://forum.xda-developers.com/showthread.php?t=991276
AND heres one that helped me install on it on ICS http://forum.xda-developers.com/showthread.php?t=1577693