Database Develop

Updating ROM problem

Hello,
I have problem with updating ROM on my Xperia buyed in T-mobile (Croatia). I made backup of my ROM, and when I tryed apply new ROM over storage card without PC (holding VOL DOWN + PWR button), first it shown display in few colors, and then it wrote "loading..." and he never loads anything
When I try put up ROM over Windows program (CustomRUU) turns off my mobile, then it show screen in few colors, connect with USB, and show next screen with progress uploading ROM, but he doesn`t want upload, progres bar stays on 0% and after minute windows update program wrote an error with connection
Do You know meaby what is the problem?
BR
Ivan

TD2 won't power up

Hey everyone,
I just installed a keyboard on my HTC TD2 and when I powered my phone back up it froze. It does not get past the "Touch Diamond 2" screen.
I have tried powering it up by holding the volume keys and the power button but that just gives me an error that says "Step 2 Error: There is no enough battery in the machine."
I also tried powering up by holding the Talk/Send key + End key + Power button and a screen just pops up with a picture of a harddrive and above it it says "Downloading"
Any help?

R&R the battery, then let it charge for a few hours, then try a hard reset.

Bruce Inman said:
R&R the battery, then let it charge for a few hours, then try a hard reset.
Click to expand...
Click to collapse
Tried it. Now the battery error doesn't show anymore and instead I get a different one:
Step 3 error while updating:
File operate: File does not exist.
Restart the machine?
(Green bar on bottom with teh word yes on it but I can't press it.)
:-X

I also just tried the hard reset after taking out the microSD and this time the screen reads:
"Check if there is a valid image"
And then it switches to"
"Step 3 error while updating:
Card operate : read retry timeout.
Restart the machine?"
(Green bar on bottom with teh word yes on it but I can't press it.)
I also tried formatting the microSD and starting/booting the phone with the microSD in it. Got the same step 3 error.

Weird that a keyboard installation would cause that...
If you are unable to hard reset, I would put a ROM .nbh file in the root of your SD card and try to flash from bootlaoder mode.
Thats the error you're getting, its looking for the .nbh file to load.

anyone find a solution for the above
i am Trying to turn my t5388i but i am not getting past through the HTC Diamond boot screen
any solution for the same

batalia said:
i am Trying to turn my t5388i but i am not getting past through the HTC Diamond boot screen
any solution for the same
Click to expand...
Click to collapse
Your's is a clone, you need to ask in this thread.

[Q] HARDSPL/FLASHING ROM - PLEASE help ME

dear guys,
I don't know what to do...
I have a very bad working rom (the energy 14oct), so today I decided to change rom.
I do this very frequently.
dunno what happened, but when I try to get in the bootloader hardspl menu, It just turn on the phone.
I tried everything, for about 50 times.
pressing both volume buttons than start button, only volume down and start button, even volume up and start button
nothing really happened.
So I decided to do it in the "windows way"
I have 7 64bit
as I don't want to download it from the original microsoft site ( ) I download it from here
http://www.cnet.com.au/downloads/so...ows-Vista-64-bit/0,239030382,10620683s,00.htm
after installing it, it recognize the phone, I did "connect withouth configuration" then I run Topaz_SoftwareUpgrade
unfortunately, it says "ERROR: 260" and it doesn't flash the rom, BUT WHEN THIS HAPPENS on the phone screen there is the hardspl menu that says "press start button to start flashing or volume down to cancel", but the menu is STUCK and I can't press anything
I tried using the MANUAL SSPL.EXE and it goes in the tricolour screen, but the buttons doesn't work! I can press anything but nothing happens.
looks like the buttons works only when the phone is in windows mobile, :'(
PLEASE I DON'T KNOW WHAT TO DO... PLEASE HELP ME

Phone not responding and only connect to flashmode

Hello everyone
Please somebody help. Iev been trying to fix my xperia z for a week now.
The phone not responding at all. It does not boot . And it doesn't charge when connect to adopter. But when I connect it to pc it dirctly connect to flash mode and green led not on. I used flashtool to flash new Rom but i couldn't .it gives an error when it start to flash . "loader.sin finished with errors" and abort.
I tried to flash many roms the same error.
Itried soft reset and hardrset still not working.
Thank you

Please somebody give me anything to try it.
The phone led blinking 3 Times when I press the power button. I Think because the phone battery os out of charge.tried to charge it. The led stop the phone still not working .

I removed the battery and connect the testpoint to GND and tried to write new boot because I thought phone boot is damaged. It turns out phone TA is damaged cuz iam getting this error in s1tool
MINOR ERROR [ Invalid_TA, err: 0016 ]
Anyone know how I can fix this?

I think I got half-brick or I don't know :S Please heeeeelp

I charged my htc one mini 2 (m8 mini) at night and in the mornig It wasn't work. My device is not rooted or not s-off, so it is factory stock. Pressing power button is not working, when i choose recovery on hboot menu, device restarts and stucks black screen and shows me red interjection mark screen, then i press volume up+power button, it says "device CW install: can not found Data". If I choose factory reset on hboot, it is being the same thing ( restarts and stucks black screen and shows me red interjection mark screen, then i press volume up+power button, it says "device CW install: can not found Data"). I don't know what to do please help Thanks a lot.

it is urgend guys help pleasee !!

blu3sm4n said:
it is urgend guys help pleasee !!
Click to expand...
Click to collapse
you not the first one this happens too. you phone lost all its data.
1- Send to HTC for repair (usually FREE)
2- Fix it yourself using tools provided in this forum.

Could you send me a link or the names of the tools dude ? I tried to install stock rom ruu using cmd command but it didnt work. I download the ruu zip file but i can not open with winrar. it says the file is broken or something.

[removed due insult]

If you don't have any solution shut up !! Is there anybody who can help ??