dear guys,
I don't know what to do...
I have a very bad working rom (the energy 14oct), so today I decided to change rom.
I do this very frequently.
dunno what happened, but when I try to get in the bootloader hardspl menu, It just turn on the phone.
I tried everything, for about 50 times.
pressing both volume buttons than start button, only volume down and start button, even volume up and start button
nothing really happened.
So I decided to do it in the "windows way"
I have 7 64bit
as I don't want to download it from the original microsoft site ( ) I download it from here
http://www.cnet.com.au/downloads/so...ows-Vista-64-bit/0,239030382,10620683s,00.htm
after installing it, it recognize the phone, I did "connect withouth configuration" then I run Topaz_SoftwareUpgrade
unfortunately, it says "ERROR: 260" and it doesn't flash the rom, BUT WHEN THIS HAPPENS on the phone screen there is the hardspl menu that says "press start button to start flashing or volume down to cancel", but the menu is STUCK and I can't press anything
I tried using the MANUAL SSPL.EXE and it goes in the tricolour screen, but the buttons doesn't work! I can press anything but nothing happens.
looks like the buttons works only when the phone is in windows mobile, :'(
PLEASE I DON'T KNOW WHAT TO DO... PLEASE HELP ME
Related
Please help I cant get my xperia into bootloader.
I've tried volume down and power technique, but to no avail.
Any suggestions? as I'm fed up of this damn o2 ROM.
Thankyou
did you turn-off your phone first?
again, turn-off the phone,
press and hold the down sound button,
press and hold the power button until the multi-color screen appear.
yes, it just doesnt go into bootloader.
I really want to flash a cooked Rom.
Please help
You must to press for long time,Until Tree-color screen to appear..
hirst89 said:
yes, it just doesnt go into bootloader.
I really want to flash a cooked Rom.
Please help
Click to expand...
Click to collapse
I dont know if theres other way to enter bootloader mode in x1...
try to search...
or maybe you can try hardspl again.
try two thinks please:
ONE:
turn of your pda by holding long time power on/off until a message comes and ask you "turning of?" (i write the short version).
than try bootlader-modus by 1. press volume down and hold 2. press power on/off and hold.
dont shocking by vibration - hold both buttons until bootloader comes.
TWO:
your pda is quite normal?
than you dont need make finger-gym. open X1_HardSPL.exe and wait two or three seconds. it extracts some files. one of this is "EnterBootloader.exe"
copy this with usb/activesync or flashcard to root of your pda. go with fileexplorer (pda) to root and klicki-micki and you straight fly to bootloader-mode.
okokur said:
your pda is quite normal?
than you dont need make finger-gym.
Click to expand...
Click to collapse
Love it!
But yes, make sure you done hardspl first. then power off phone then hold volume down and power do not let go of buttons until multicolour screen appears.
Tin.
TBH you don't need to hardspl to get to the tri-color bootscreen, just to flash with custom roms.
And if nothing works, remove and reinsert the battery then hold power+volume-down key until it vibrates and let them go when the screen shows up.
try taking the battery out first, then putting the battery back in. make sure that the phone is NOT connected via usb cable, or else it will automatically turn back on.
then use the power and lower volume key to enter bootloader mode.
Hi all,
so i did a bad flash and my diamond doesnt boot into windows, not a problem with the Unlocker Right? turn off and turn on holding power+down volume key+ center key and back key, it boots into bootloader but it just sits there saying LOADING... and this is because the internal memory wasnt being recognize by windows before the bad flash.
do i have any other alternative??
Hi, fear not my friend. Just boot into bootloader mode by pressing power key and volume down at the same time (If you press the center button also you will trigger a hard reset.) Then plug your phone on your PC. On the bottom of the phone screen you should see that the word serial changes for USB. Then just lauch any rom upgrade(either a stock rom or a custom one). The rom upgrade utility will the upgrade your phone like it normaly does when it's not bricked. It will just be a little longer.
you have hold the power volume down and press soft reset to enter boot loader
Hi
I have the same problem, I flashed my diamond with a bad flash, now it turns over, I try a hard reset, it works not so.
when I plug in the charger, the LED does not light.
what should I do, help me pls!
Here is the link where I downloaded the flash: ftp://ppcgeeks.com/Diamond/Users/Tobeychris/Tutorial/Diamond Unlocker.rar
Dear friends,
I was trying to flash my diamond with mtty, where i guess i messed up with commands, I formatted it, then tried to restart with "task 8" then my phone turned off and never on again no matter what i did or key pushed.
Any help will be much appreciated...
me too
but i don't know how to use Jtag recover BL for Diamond
Update ROM by using the BootLoader
Hello there,
even though you can't boot into your OS in the Diamond, there's a way to enter "BootLoader" mode. I'm not sure it works, but you can give it a try.
Here's how:
- Connect the Diamond to your PC
- Enter bootloader mode on your Diamond: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.
- Use the ROM Update Utility. If the previous step worked and your connection is working, then with some luck you will be able to Flash the Device with the ROM update utility.
I've tried to find the thread that discussed this with pictures and such but couldn't. You might want to look for similar instructions
Good luck
Shane
JTAG
does anyone managed to JTAG diamond?
hi ...
i have HTC opal and from while i have install a new ROM and it's work ok
then after two week .. my phone does'nt work he hang at boot screen
is there any way to format it with out it working .... please any help .
try a hard rest
Don't worry, your device is not damaged. Follow the guide here to fix your problem:
http://forum.xda-developers.com/showthread.php?t=685025
Note that you'll lose all data on your device when performing this fix. Hope you have a backup at hand!
Essential thing to be known:-
1. Bootloader mode Knowing how to enter into Bootloader mode is one of the most essential thing to be known for a opal user (windows mobile users).
How to enter?
There are two way to enter into bootloader mode.
1. If you device is on, open your device's back cover. Press the soft reset button ( red button ) using stylus. As soon as you press it, immediately press the volume down button and keep holding it until you see a tri-color screen on your device's screen.
2. If your device is off, press the power button as soon as the device vibrates immediately press volume down button and keep holding it until you see a tri-color screen on your device's screen.
Uses?
If you flashed a damaged rom, you would be no longer able to use your device. In that case enter into bootloader mode. And flash a different rom.
Click to expand...
Click to collapse
Good luck..
thnx .... i will try it ....
So I decided to install the new Android revuloution rom (4.4) and I did so by usig ADB sideload in TWRP. I forgot to wipe cache and now it wont boot up at all. I oress and hold the power button and all i get is the home and backbutton flashing three times. When i put it into my computer, i hear it gets detected but nothing happens exept HTC Sync opens up. When i look at conected devices it sais that i have a device called"Android phone" connected. Nothing else. Please help
press and hold power until the home, back and recent apps ? then they stop flashing and the screen goes black, let go of power and press and hold volume down until bootloader comes up.
Had this same problem today in fact. The solution works well.