hi
i have rooted my SE x8.
which rom is best suited for for x8?
Is there any procedure to unroot?
i suggest that you try latest version of gdx available on the android devlopment section it is almost complete gingerbread rom and also remember to read all the instruction given there otherwise you will brick your phone for e.g remember to flash the add on module for latest version otherwise multitouch,uv will not work
and for unrooting the device you need to flash the official rom using flash tool or update with seus(pc companion)
good luck
tapu015 said:
hi
i have rooted my SE x8.
which rom is best suited for for x8?
Is there any procedure to unroot?
Click to expand...
Click to collapse
1: root your x8 with super one click
2: install andro xplorer from market
3: get busybox, chargemon, xrecovery.tar and root explorer
4: install root explorer apk
5: using root explorer copy busybox to system/bin
6: using root explorer copy chargemon to system/bin
7: using root explorer copy x recovery.tar to system/bin
8: press and hold x recovery select permissions to
[x] [x] [x]
[x] [x] [x]
[x] [x] [x]
ie tick all the boxes
9: download fb21 as this will give you cwm
10: down load gdx v019 + Modules for stock kernel.
11: now put all 3 files fb21, gdxv018, Modules for stock kernel. in a folder on your sd card call folder x recovery
12: now turn of phone and turn it back on when you see the 1st sony ericsson logo push the back button repeatedly
13: now select backup/restore
14: make a back up of your stock system
15: select (full wipe)
16: select install custom zip
17: choose custom zip from sdcard
18: select x recovery
19: select fb21.zip
20: now reboot phone
21: now when you see the se logo tap your screen
22: do a (full wipe) then select install zip from sdcard
23: select choose zip from sdcard
24: select x recovery
25: select gdx v019
26: repeat step 20, 21, 22, 23, and 24
27: now select Modules for stock kernel.
28: now restart your phone and you will have 2.3.7
link for busybox: http://www.multiupload.com/04336TJT51
link for chargemon: http://www.multiupload.com/0DT11BA853
link for x recovery.tar: http://www.multiupload.com/FK1X3OWQBE
link for root explorer: http://www.multiupload.com/WNQ3R2O9QN
link for fb21: http://www.multiupload.com/RZX8SC908C
link for gdx v019: http://www.multiupload.com/VVV58PVEUM
link for .modules.for.stock.kernel: http://www.multiupload.com/WRP51P3OOS
I'm not to blame for any damage you mite do or if you brick you x8
Related
Hello Xda developers,
I'm Giri. i bought new xperia x8 mobile. it has working in android 2.3..I'm new user for androi mobile.I dont know How can i upgrade my phone..Please any one tell me How can i upgrade my mobile android 2.1 to android 2.3?
Please tell that in step by step. please
you should install Custom ROM, because SE didn't give X8 update to GB (2.3).
you can choice custom ROM here
You must:
1) root your phone
2) install CWM/xRecovery
3) change baseband to 015
4) optional: unlock and intall kernel
5) install ROM
Links for help:
[REF]
CWM
Unlock
silvergiri said:
Hello Xda developers,
I'm Giri. i bought new xperia x8 mobile. it has working in android 2.3..I'm new user for androi mobile.I dont know How can i upgrade my phone..Please any one tell me How can i upgrade my mobile android 2.1 to android 2.3?
Please tell that in step by step. please
Click to expand...
Click to collapse
1: root your x8 with super one click
2: install andro xplorer from market
3: get busybox, chargemon, xrecovery.tar and root explorer
4: install root explorer apk (i root explorer mount as r/w)
5: using root explorer copy busybox to system/bin
6: using root explorer copy chargemon to system/bin
7: using root explorer copy x recovery.tar to system/bin
8: press and hold x recovery select permissions to
[x] [x] [x]
[x] [x] [x]
[x] [x] [x]
ie tick all the boxes
9: download fb21 as this will give you cwm
10: down load gdx v019 + Modules for stock kernel.
11: now put all 3 files fb21, gdxv019, Modules for stock kernel. in a folder on your sd card call folder x recovery
12: now turn of phone and turn it back on when you see the 1st sony ericsson logo push the back button repeatedly
13: now select backup/restore
14: make a back up of your stock system
15: select (full wipe)
16: select install custom zip
17: choose custom zip from sdcard
18: select x recovery
19: select fb21.zip
20: now reboot phone
21: now when you see the se logo tap your screen
22: do a (full wipe) then select install zip from sdcard
23: select choose zip from sdcard
24: select x recovery
25: select gdx v019
26: repeat step 20, 21, 22, 23, and 24
27: now select Modules for stock kernel.
28: now restart your phone and you will have 2.3.7
link for busybox: http://www.multiupload.com/04336TJT51
link for chargemon: http://www.multiupload.com/0DT11BA853
link for x recovery.tar: http://www.multiupload.com/FK1X3OWQBE
link for root explorer: http://www.multiupload.com/WNQ3R2O9QN
link for fb21: http://www.multiupload.com/RZX8SC908C
link for gdx v019: http://www.multiupload.com/VVV58PVEUM
link for .modules.for.stock.kernel: http://www.multiupload.com/WRP51P3OOS
I'm not to blame for any damage you mite do or if you brick you x8
I am a newbie!
I just only realize that SE xperia x8 can update to v2.3 using minicm7..
before that he need me to install CWM (but i dont even know what is CWM)
so i try to search at android market and i found a apps "Rom manager" so i downloaded and try to use.. after that the "Rom manager" want me to root my phone.. so i search how to root a phone and i also downloaded the superonclick.. BTW i follow the step and root... but the superoneclick not responding when i plug in the cable to connect to my pc..
So anyone can help me by giving me a very detail way to update my x8 to 2.3 using minicm..
Please i really need that!
Before plug your phone enable debugging! Than root your phone, download from here x8 tools and install dual recovery
Sent from my X8 using XDA App
Thx.. finally i rooted.. then can i know the next step i need to do is?
The best way is download from this forum x8toolbox search for it...and install dual recovery( you must enable debugging too)...then pick up rom which you wanna install, place it on your sd card, reboot phone if rom must be installed with xrecovery start pushing back button when se text appear and if with cwm start tapping screen when se text appear, choose install custom zip and pick your rom from sd card( by volume buttons, middle buton is "ok")wait until rom installed do a full wipe and reboot your phone
but i cant found x8toolbox.. can u give me the link?
Here you go http://www.mediafire.com/?3ruba74bo8hn361
Download it and extract...run tool box and plug your phone( with enabled debugging)..if its not work install ALL drivers for your phone...but it should work if you have installed pccompanion....its mean that you have installed all drivers....
so can i know what shuld i choose?
after i open the tool box..?
Choose recovery, install dual recovery...
john9509 said:
Thx.. finally i rooted.. then can i know the next step i need to do is?
Click to expand...
Click to collapse
1: root your x8 with super one click
2: install andro xplorer from market
3: get busybox, chargemon, xrecovery.tar and root explorer
4: install root explorer apk
5: using root explorer copy busybox to system/bin
6: using root explorer copy chargemon to system/bin
7: using root explorer copy x recovery.tar to system/bin
8: press and hold x recovery select permissions to
[x] [x] [x]
[x] [x] [x]
[x] [x] [x]
ie tick all the boxes
9: download fb21 as this will give you cwm
10: down load gdx v019 + Modules for stock kernel.
11: now put all 3 files fb21, gdxv018, Modules for stock kernel. in a folder on your sd card call folder x recovery
12: now turn of phone and turn it back on when you see the 1st sony ericsson logo push the back button repeatedly
13: now select backup/restore
14: make a back up of your stock system
15: select (full wipe)
16: select install custom zip
17: choose custom zip from sdcard
18: select x recovery
19: select fb21.zip
20: now reboot phone
21: now when you see the se logo tap your screen
22: do a (full wipe) then select install zip from sdcard
23: select choose zip from sdcard
24: select x recovery
25: select gdx v019
26: repeat step 20, 21, 22, 23, and 24
27: now select Modules for stock kernel.
28: now restart your phone and you will have 2.3.7
link for busybox: http://www.multiupload.com/04336TJT51
link for chargemon: http://www.multiupload.com/0DT11BA853
link for x recovery.tar: http://www.multiupload.com/FK1X3OWQBE
link for root explorer: http://www.multiupload.com/WNQ3R2O9QN
link for fb21: http://www.multiupload.com/RZX8SC908C
link for gdx v019: http://www.multiupload.com/VVV58PVEUM
link for .modules.for.stock.kernel: http://www.multiupload.com/WRP51P3OOS
I'm not to blame for any damage you mite do or if you brick you x8
NOTE:
backup data before starting
SD Card must have 400MB+ free space
Only for Gingerbread Stock ROM with Stock Recovery / Android Recovery
First, download this file:
https://www.box.com/s/2219272abfeb194f43c7
https://www.box.com/s/85201d8d35e4a7b27198
Features:
Ext4 filesystem type
Support /etc/init.d script
Some scripts for system optimization ( /etc/init.d )
Busybox 1.20.0-cm7 bionic
Superuser 3.0.7
Su-binary 3.0.3.2
File Manager
Terminal Emulator
No-Frills CPU Control
DSP Manager
S2E
Custom Bootanimation
ICS Bootanimation
Auto mount Linux Swap
Zipalign
Bravia Engine
Sqlite patch
Wi-Fi Ad-Hoc
Composition type GPU
Kernel Feature:
Overclock up to 787Mhz
More Governor
More I/O Scheduler
Compcache ramzswap
cifs, Ext4/3/2 filesystem support
OpenVPN support
Step:
1. Copy and paste the files that have been downloaded into /sdcard
2. Booting into Android Recovery / Stock Recovery
3. Apply update from sdcard, then select "A-ubah-StockROM-by-ahmadsafar-xda-signed.zip". then, reboot.
4. Extract the file "ubah-StockROM-package.zip" with File Manager.
long-press file "ubah-StockROM-package.zip", select Extract, Extract to this Directory
5. Open the Terminal Emulator, type "su", then "sh /sdcard/myrom.sh" without the quotes
6. wait until the device automatically reboots into recovery (recovery turned into a CWM, because zip previous update)
7. if the device is rebooted into recovery, wipe data/reset & wipe cache
8. apply update from sdcard, select the "update-My-CustomROM-signed.zip". then, reboot.
9. Enjoy
10. Sorry for my bad English
Amazing guide.... I'm sure many will find it useful. I'll also use it for myself when I'm tried of all other roms.
Thanks!
update, fix wifi for several baseband
My Galaxy stuck in Galaxy Next boot
realy thank you my phone is destroy thank you full
my phone run and say Galaxy Next and page not changed
Hi there,
I have version 026 and I want 027 how do I gingerDX v 027 on my phone?
stock kernel as well
1. Download the v07 from here.
2. Download module from http://www.mediafire.com/?86n454in0jdzyac
3. Copy downloaded file on your memry card.
4. Reboot to recovery.
5. Full wipe (data,cache,dalvik)
6. Flash the downloaded files.
7. Reboot and wait.
8. Nextime please read before asking
deedii said:
1. Download the v07 from here.
2. Download module from http://www.mediafire.com/?86n454in0jdzyac
3. Copy downloaded file on your memry card.
4. Reboot to recovery.
5. Full wipe (data,cache,dalvik)
6. Flash the downloaded files.
7. Reboot and wait.
8. Nextime please read before asking
Click to expand...
Click to collapse
do I delete v026?
how do I flash the downloaded files?
And what should I delete in order to preserve memory
Will it also work for stock kernel?
By flashing it will overwrite your old system.
You flash by the same instructions you made to get v26
I guess you have to read what is written here.
Your questions is all basic maybe take sometime to read this. It will teach you so much
This guide will root your device through Stock MI Recovery(Works with TWRP also), but this is not Native Root. A new app named SuperSU will be installed, which will give root Permission.
Note : - Rooting Void Warranty.
Caution:
This is a safe process, but I am not responsible for anything bad that happens to your phone.
In most cases this approach of rooting should not block OTA updates.
Steps to follow for rooting:
1. Download the Redmi2pLRoot.zip and Copy the file to the folder 'Internal storage' (root of internal storage)
(File at the end of thread)
2. Open the Updater app, Press the 3 dots at Right Top Corner, A menu will open. Tap on “Choose Update Package“ and select the Root.zip File.
3. Wait until device will reboot.
4. After reboot a new app SuperSu will be installed.
5. Open the app and Choose"Continue".
6. Choose "Normal", Don't Choose TWRP/CWM, device will go into Boot Loop.
Note:- Don't Choose TWRP/CWM, it will brick your device.
7. After sucessful updation , press ok.
8. Your Phone has now Root Permission
NOTE IM JUST SHARING THIS ALL CREDITS GOES TO ORIGINAL DEVELOPERS ORIGINAL THREAD LINK:- http://en.miui.com/thread-223314-1-1.html
I am using Tesla rom. I have no updater app. How can I root my redmi 2 prime without pc?