The Kaiser will be my second Win Mob device (8525 is what I am currently using).
I wonder what is the general experience with moving purchased applications to the new device.
Does a new IMEI create no barriers to continued use?
Are software houses amenable to issuing new reg codes for the apps you have purchased?
Does this mean re-purchasing all the apps that I have come to count on each day?
Err, most paid software comes with this thing called activation key...
and of those, most of them are keys generated through the owners' name.
(You can tell this if it displays the owners name on the registration file).
FYI: Activation keys will change if it is not the same version. So if you backuped your cabs and have your keys, then there should be no issue into installing it on another ppc.
I bought resco explorer 2005 a while ago. It works on my friends ppc and mine, while under the same name.
Well, Yeah.
I referred to "activation key" as "reg(istration) code."
However, some apps, like Opera are locked to the IMEI and you need a new reg code.
I was wondering what issues folks had had with apps where the reg code is linked to the electronic serial number (IMEI) of the device.
Hello
I store my address data in PI 2007 and use the fields for different telefon numbers like Home, Office and Mobile (actual all data comes per sync from Lotus Notes).
But when I try to use the smart dialing option of the phone pad and type the letters of the name like F R E E C A L L
I get only offered one number per entry ..like Freecall mobil , but not the other 2 numbers at all .. What is wrong ?
Without having the other numbers to select the smart dialing is quite useless.
On my MDA II I had a third part dialer phoneplus how could access the 3 numbers in a selection dialogue with no problem .
any advice ?
Freecall
I'm not sure if it's the same on the Kaiser, but on the Universal there would be a little W, M or H next to the contact to show Work, Mobile or Home. Pressing left or right on the direction pad cycles between the available numbers.
Noiz said:
I'm not sure if it's the same on the Kaiser, but on the Universal there would be a little W, M or H next to the contact to show Work, Mobile or Home. Pressing left or right on the direction pad cycles between the available numbers.
Click to expand...
Click to collapse
That is exactly how it works on the TyTN II
super .. that was the missing hint !!!
And with sunnysoft now even my ATT calling card setup works fully automatically
- Local Access number
- Destination number from Kaiser phone book
- ATT code
- ATT PIN
eh voila
the kaiser becomes more and more the DREAM MASCHINE for me !
(not to hard moving up from a WM 2003 MDA II I need to admit )
Hi
I have problem with Topaz. When I save in contact - mobile No with country code (egz. +44) and try to call from other phone my Topaz don’t recognize number and is showing as a number not contact which was saved.
If I save in contact mobile No as 0xxxxxxxx without country code everything works ok it will show. What is wrong? Is there any setup or patch or anything what I can do with that? I’m travelling quite often so I store numbers with country code.
(Sorry for English)
I do not have this problem, but afaik there is an option on how many digits the number is recognized.
Set your caller ID to identify according to greater or lesser number of digits.
Otherwise, it may be that you have duplicate entries. This would also affect Caller ID.
where is the setting to change the number of digits - I appear to only have options for all contacts, no or address book ...........but no digit mask
I'm having the same issue.....
I've tried to manually add a number. With/without all/some prefixes.
Using + and 00.
I've checked to duplicates.
I've emptied by phonebook and SIM.
I got someone to call me. Saved their number from the call.
I've tried, say, +353868033333 and +3530868033333 and 0868033333 and 868033333 and replaced the + with a Zero.
I've set my Caller ID from 12 down to 2 and still nothing.
I do note something interesting.
I had ONE phone number work so far.
And I've yet to discover why.
I've placed a call with HTC and they are aware of the issue for only a week so far it seems but I think this has been an issue even from previous models.
Anyone got any others ideas? I'm going to try the hard reset and allowing it to import one number from the SIM card. And then I'll sync my full phonebook and see. But I'm holding off a few days to see if HTC will wake up and smell the coffee.
starfish_001!!!
starfish_001,
You need to get a Regedit tool, such as "PHM Regedit" and go to....
HKEY_CURRENT_USER \ ControlPanel \ Phone \
There is a key in there called "CallIDMatch".
You will have to change the range from about 12 down to 2 depending on your phone numbers etc. A soft reset is needed after each change to test.
BUT this has not solved my problem yet. It has for some it seems.
- Geoff
geofflyons said:
starfish_001,
You need to get a Regedit tool, such as "PHM Regedit" and go to....
HKEY_CURRENT_USER \ ControlPanel \ Phone \
There is a key in there called "CallIDMatch".
You will have to change the range from about 12 down to 2 depending on your phone numbers etc. A soft reset is needed after each change to test.
BUT this has not solved my problem yet. It has for some it seems.
- Geoff
Click to expand...
Click to collapse
Excellent - I will give this a go
Ummm... there might be some trouble...
Let me try to help...
Normal number should consist of:
+ (international prefix)
xxx (country code)
xxx (area code/provider prefix)
xxx xxxx (phone number)
So let's use some reverse engineering:
- are ALL phone numbers in your country lenght 7 digits?
- is area code always 3 digits?
- how long is your country code?
For example, post #5:
"+353868033333 and +3530868033333 and 0868033333 and 868033333"
phone number: 8033333
area code: 086
country code: 353
Catch 22: you HAVE TO ommit 0 from area code, so it becomes 86 and correct form becomes first one, +353 86 8033333.
So recognition lenght should be: 7 + 2 + 3 = 12. Right? Not always.
Normally, math goes like this: (shortest possible phone number lenght in your country) + (shortest possible area code lenght without zero) + (country code)
In my country, it looks like this: 6 + 1 + 3 = 10
Example: +385 1 999999
But, there could be: +385 51 999999
and: +385 91 999999
If you go from lenght 2 up, you notice that till lenght 8 those 3 numbers are same for caller ID!
Now, try to play that with you country's number format... not to mention USA, where country code is 1!
Sorry if all of this was already obvious...
Bodisson,
Thanks for that expansion of the issue.
I'm going to give it another go.
Unfortunately the phone numbers here in Ireland can be in a range of:
+363 86 8033333 to +353 1 55555 so perhaps the Irish will be stuck with a HTC phone that will only recognise a handful of phone numbers.
I tried the CallerID with 12 and lower already. I might have to go right back to the basics on this one and start with one phone number.
I've read in other threads that people had to do a hard reset, have some numbers on their sim and then allow the wizard to copy those numbers across. You can then add the full set of numbers.
Thanks for your calculations. I'll give it one more shot before I do a hard reset. If only HTC would roll out WM6.5 so I can try that first. I'm a little put off by the manual upgrades.
Regards,
Geoff
I am having this problem after installing a Translation software in my device, where it automatically installed other languages.... i tried un installing it, but the problem persist, i have to hard rest i think !!
Dreaded VM phone lost meid.
Service will not allow reactivation
I have serial and hex is there an app
To help edit or reenter the settings.
I noticed. In europe they have web pages about this. But for their countries system towers .
I realize swapping phones is not allowed but reinstalling your actual
# meid should fairly simple most likely a program converts your serial
Access code to generate all settings
On that unique phone hex generator.
Any thoughts are appreciated I noticed in CYn11 your settings were
Visible.
Thanks Doug
Just bought the new Honor 9 lite Indian version online and had all set up including my google id. Google just replied to my mail that a new device is configured. The device name is listed in chinese characters except the word Honor. Any idea why? But in the device the device name is in English only. Puzzled !!