I've got Liberty 1.0 installed, and just installed the red ICS theme (because I'm an idiot).
Trying to get into clockwork doesn't work going through M+Power -> BP Tools
And my boot animation is just looping over and over...
Time to SBF? :S I've got an XT862
Sweet... I SBF'd and I'm still bootlooping, just with the stock bootscreen now >.<
librarat said:
Sweet... I SBF'd and I'm still bootlooping, just with the stock bootscreen now >.<
Click to expand...
Click to collapse
Try wipe data/cache
Yes I believe I had to wipe data/cache when I re-flashed the Chinese ME863 SBF. Good luck!
Have to wipe data and cache after sbf.
Sent from my DROID3 using xda premium
Related
So I wipe everything including dalvik and cache and factory reset then I flashed atomic fusion over miui using cwm and it says installation complete, so I rebooted my cappy. And my phone still in miui rom and I can't go to recovery or download mode, I can't download any apps from the market but my phone still works. Anybody can help me?
Sent from my Htcclay's SuperCM7 G2 using XDA Premium App
G1rome said:
I can't go to recovery or download mode
Click to expand...
Click to collapse
like not at all, using key combo? extended power menu? JIG? adb?
G1rome said:
So I wipe everything including dalvik and cache and factory reset then I flashed atomic fusion over miui using cwm and it says installation complete, so I rebooted my cappy. And my phone still in miui rom and I can't go to recovery or download mode, I can't download any apps from the market but my phone still works. Anybody can help me?
Sent from my Htcclay's SuperCM7 G2 using XDA Premium App
Click to expand...
Click to collapse
This is why you flash back to stock before another rom. Have you tried ADB Reboot download?
i havent flashed atomicfusion yet, but i think you are supposed to flash the initial odin one click ver1.0 of AF to get the GB bootloaders installed first cuz MIUI doesnt use official SGS GB bootloaders. i dont think the .zip contains bootloaders, could be wrong tho.
CremeFraiche said:
i havent flashed atomicfusion yet, but i think you are supposed to flash the initial odin one click ver1.0 of AF to get the GB bootloaders installed first cuz MIUI doesnt use official SGS GB bootloaders. i dont think the .zip contains bootloaders, could be wrong tho.
Click to expand...
Click to collapse
There is a 1 click that flashes GB boot loaders with a "stock" KF1. Considering Atomic Fusion is KF1 based id use that. There is also a Odin file that will flash "stock" KF1 without boot loaders if you already have GB boot loaders.
Gingerbread with Boot loaders
Gingerbread without boot loaders
Have you tried using ADB to get into download mode?
If your phone is working, and recognized by USB, I'd say it'd work.
Thanks for the help I tried using one click root and took me to cwm recovery and did a full wipe and my phone is working properly now. Its weird tho one click root fix my problem.
Sent from my Htcclay's SuperCM7 G2 using XDA Premium App
Im still very new to this. Im trying to install Fasty II, and im stuck at the AT&T logo, and im pretty sure its because i cant wipe the Dalvik cache. When i tried to wipe it, it just would do nothing.
First of all, I did confirm the wipe, i didnt hit no on accident
Anyway, whenever I try to wipe it, I get no error or anything, it just goes back, basically as if i am pressing No instead.
Everything that I did in the following order
1. Went back to stock with the Odin One-Click
2. Went to Download mode and installed the Captivate Gingerbread bootloaders (ran as admin)
3. Wiped the data and tried to wipe the Dalvik cache but nothing happened
And btw the same thing happens when trying to wipe battery stats
Am I doing something wrong, is it that there isnt a Dalvik cache (again Im a n00b), or something else entirely?
Probably included a lot of extra info just wanna be thorough.
Thanks in advance
Ginger bread boot loaders for a froyo rom? That's your problem, wrong boot loaders, man. Flash back to 2.1 stock and give a reread on the fasty instructions.
if you could try any of the button combos to get into download mode, you could flash back to stock there.
Or take out the battery, Sim and sd card, plug the phone the USB cord into the phone, hold the volume buttons down and plug the battery in, if it worked, you should be in download mode. Flash back to stock.
If those two didn't work, look into a jig.
Sent from my SGH-I897 using XDA App
Born2BeMild said:
Ginger bread boot loaders for a froyo rom? That's your problem, wrong boot loaders, man. Flash back to 2.1 stock and give a reread on the fasty instructions.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
No its Fasty II, which is gingerbread
Really, strange, haven't seen it.
Edit: okay, I saw, my mistake, I thought you meant the fasty 2.0+ versions.
Sent from my SGH-I897 using XDA App
Born2BeMild said:
Really, strange, haven't seen it.
Edit: okay, I saw, my mistake, I thought you meant the fasty 2.0+ versions.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
No worries
Born2BeMild said:
Really, strange, haven't seen it.
Edit: okay, I saw, my mistake, I thought you meant the fasty 2.0+ versions.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Either way, the gingerbread boots are backward compatible. Doesn't matter if he was installing a froyo rom or gingerbread. They work either way.
OP: how did I install cwm? Could just be that version doesn't confirm when deleted although it is wiping it. Either way not wiping dalvik should not cause a boot loop, if it was all clustered you would be laggy and perhaps a few apps force close, but it should boot.
Try and re download the rom and reflash.
studacris said:
Either way, the gingerbread boots are backward compatible. Doesn't matter if he was installing a froyo rom or gingerbread. They work either way.
OP: how did I install cwm? Could just be that version doesn't confirm when deleted although it is wiping it. Either way not wiping dalvik should not cause a boot loop, if it was all clustered you would be laggy and perhaps a few apps force close, but it should boot.
Try and re download the rom and reflash.
Click to expand...
Click to collapse
Well I tried re-downloading and still get the boot loop.
After installing gingerbread bootloaders, im pretty sure i just did the update.zip way of getting cwm. idk if cwm has been updated since i got it, which was quite a few months ago, but ya idk if that means anything
EDIT: I think it actually was CWM, i tried flashing again, got the bootloop, went into CWM, and it was a diff color so im assuming it was updated, and flashed it again and it worked.
Thanks for the help
EDIT 2: Spoke too soon, stuck at startup now. Has been on the Galaxy S Screen for the last 10 mins
The cwm after the first flash is the one makes into the kernel.
If it doesn't loop the animation and is just staying at the S it should be re building dalvik which takes awhile
All right it works now thank you
hey guys so i flashed a rom to my bionic and it seems i just keep getting stuck in the bootloop and cant get out of it .does anyone have a fix
Use rsd lite to get back to factory stock. Then used R3L34S3D R00T 4EV3R R00T to re-root. Get a boot strapper and try again.
If the rom you were flashing was [K]IN3TX and you tried to flash a theme at the same time. You would have gotten that problem.
Sent from my DROID BIONIC using xda premium
If you can get into the recovery you could do the factory reset and wipe data and cache again and reinstall the rom sometimes that will fix the bootloop problem
Sent from my DROID BIONIC using Tapatalk
I agree with both solutions mentioned above. A mix of the two suggestions rather. Using the fastboot menu, clear all your cache and then use the rsd lite (http://forum.xda-developers.com/showthread.php?t=1262540) to factory restore.
Hi. Would be great if anyone could help as I bricked[?] my phone earlier today.
So here's what happened.
I was on SweetRomV1 JB previously and wanted to flash back to ICS RRv12.
So I stupidly flashed Abyss Kernel from my recovery forgetting that it doesn't support JB rom.
So the CWM started refreshing itself, stopping me from surfing the menu up and down.
I pulled out the battery, place it back in. The phone started up, but the screen was empty/blank/black.
Searched on the net then I realized Abyss Kernel doesn't support JB.
So under some forumer advice, I flashed a Stock ICS Rom using PC odin.
This time, I can access recovery with no problem. However I'm still stuck, the phone is not rebooting.
I'm stuck at the Samsung logo.
So I decided to flash a new kernel using PC odin and a new rom.
I flashed SpeedMod K3-15 using Pc odin and in recovery, I flashed the RRv12 rom.
Now it's still loading the boot animation.
I'm really at a loss now. Can anyone help?
I can access download mode and recovery. But I can't place files into my ext_sd because I can't boot up my phone.
Can anyone help me to get my phone working again?
Thanks in advance.
Flash stock gb via pc odin and work from there. The problem is you flashed incompatible kernels. The flash back to original should be fine.
Sent from my GT-N7000 using xda premium
are you on rr now? what do you see in recovery? is it cwm philz? if yes do a factory reset, wipe data, wipe dalvik and reboot
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
are you on rr now? what do you see in recovery? is it cwm philz? if yes do a factory reset, wipe data, wipe dalvik and reboot
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Nope. CWM-base recovery.
if you are on a safe kernel ek do a factory reset
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
if you are on a safe kernel ek do a factory reset
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I did it last night. I'm able to boot up now and I'm in RRv12 now. However, what just happened was, I changed to a fresh battery to charge it.
When I boot up, it shows that battery is disconnected. So I did a power off, and pulled out the battery. Used the method online, dropped the battery from around 2 feet high.
When I place the battery in again, I'm stuck AGAIN at the boot animation.
Any help?
Hey guys. Been around for a while and have never encounted this problem. I went to restore back to stock firmware after running a custom rom.. both 4.3... I added the firmware to odin. It failed before it started and rebooted th phone. Figured out that the firmware I downloaded must of been corrupt/incompletly downloaded.. stuck on samsung boot logo.. tried to restore a fresh complete rom but still stuck on boot logo.. is there something I can do to fix it other than sen it in.
Sent from my GT-S5830 using xda app-developers app
You don't mention recovery .
Usual would be to format sdcard system data cache boot to download mode and flash stock rom .
Yeah i have done all that
Sent from my GT-S5830 using xda app-developers app
After install, try pulling the battery during boot then boot into stock recovery and do a factory reset/data wipe.
Has worked for some
fridgie said:
After install, try pulling the battery during boot then boot into stock recovery and do a factory reset/data wipe.
Has worked for some
Click to expand...
Click to collapse
Tried. Didnt work.. seems like the I have corrupted something in the phone.. tried everything in this forum. But wont come out of boot loop..
Sent from my GT-I9305 using xda app-developers app
winxuser said:
Tried. Didnt work.. seems like the I have corrupted something in the phone.. tried everything in this forum. But wont come out of boot loop..
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Have you tried to change the sdcard?
viktorak said:
Have you tried to change the sdcard?
Click to expand...
Click to collapse
the sdcard is not the problem,, i have corrupted the partitions i think,, altho flashing firmware with odin works fine, it just doesnt boot
really wish I could afford to get this phone fixed I miss this phone and have gone back to an old crappy galaxy ace