Related
So i decided to go on a Flashing spree today for no reason, i just felt like it..
I started out by flashing 2.2 on my 2.1 phone, that all worked out quite well, but for some reason i could not root it. ( I used http://forum.xda-developers.com/showthread.php?t=845558) It all worked out nicelly but since i could not root it, i just game up on it.
After searching i found http://forum.xda-developers.com/showthread.php?t=734475 to revert my phone back to its original firmware. I have a Galaxy s Vibrant, so i thought it was the correct thing. But since i installed it i have alot of problems.
First of all, when i plug it into my USB the phone auto turns off. And it will not charge when the usb is in.
I have rom manager installed, but when i try to run a rom, i keep getting the error (status = bad ).
Also the phone wont recognise my SimCard so i cant stay with this firmweare anyways.
flash back to a stock Froyo
then boot into the Recovery Mode
then wipe data, and wipe cache
see if that helps
Do you know the best place where i can get a stock froyo rom ?
amnoric said:
So i decided to go on a Flashing spree today for no reason, i just felt like it..
I started out by flashing 2.2 on my 2.1 phone, that all worked out quite well, but for some reason i could not root it. ( I used http://forum.xda-developers.com/showthread.php?t=845558) It all worked out nicelly but since i could not root it, i just game up on it.
After searching i found http://forum.xda-developers.com/showthread.php?t=734475 to revert my phone back to its original firmware. I have a Galaxy s Vibrant, so i thought it was the correct thing. But since i installed it i have alot of problems.
First of all, when i plug it into my USB the phone auto turns off. And it will not charge when the usb is in.
I have rom manager installed, but when i try to run a rom, i keep getting the error (status = bad ).
Also the phone wont recognise my SimCard so i cant stay with this firmweare anyways.
Click to expand...
Click to collapse
It looks like you flashed the actual "Vibrant" (T-Mobile US) type firmware onto your Bell i9000M phone... I dont know if you can flash back as the Download and Recovery modes for the actual Vibrant are different than the i-9000 model phones...
@Allgamer, can you be of any further help?
btw i really hate Samsung right now, why would you release a phone called a i-9000m Vibrant, then release a phone under the brand name vibrant
amnoric said:
btw i really hate Samsung right now, why would you release a phone called a i-9000m Vibrant, then release a phone under the brand name vibrant
Click to expand...
Click to collapse
I agree with you on this man. How confusing could they make it? I guess they did it to sort of distinguish our model of i9000M from the International version but couldnt they at least give a different name from the U.S. model?
They even look identical except for the fact that the U.S. Vibrant has 4 soft keys at the bottom where we have the 2 soft and 1 hard key...
Well now that my panic attack is over and my phone is back to normal after Flashing 2.2 on it ( FOR I-9000m even ).
I have another random question..... what is the best way to root 2.2.. since the whole point of the **** up was because i would not root it
amnoric said:
Well now that my panic attack is over and my phone is back to normal after Flashing 2.2 on it ( FOR I-9000m even ).
I have another random question..... what is the best way to root 2.2.. since the whole point of the **** up was because i would not root it
Click to expand...
Click to collapse
I recommend the app called z4root by RyanZA. You can find it on the Market. It is a one click root that requires no flashing of any kind.
You may have to start the app and if it seems to hang for a while just perform a reboot and run the app again and it will root within 30 seconds. Also be weary in the Market as someone has stolen the icon and everything from RyanZA and the "rip off" app is NOT complete. Make sure the one you download states it is from RyanZA...
Hi all, I'm a normal XDA user with my HTC hero.
My girlfriend recently bought the Rogers Samsung Captivate, and had a few issues with it. First the battery life was only lasting half the day. Then one day, it restarted itself 5 times. Then it seemed like it was laggy. At first when she told me about the battery issue I thought, ok maybe if we put a custom ROM on, it may help. So I rooted, put clockwork recovery, then installed Assonance ROM. We seemed to have gotten rid of the lag but the random restarts seemed to persist, then she was having Sms's coming in weird, so I decided we should put it back to stock and get it back to rogers. So i tried doing a restore from clockwork, but it still has the AT&T logo, and when the phone boots, I have a black screen that says no service on the top right, and swipe screen to unlock, but it won't unlock.
All I want is this thing back to stock, no AT&T screen so I can try to warranty this thing.
Thanks in advance for any help, I've done some searching and can't seem to get this thing back to life.
Thanks,
AZ
AbsoluteZero said:
Hi all, I'm a normal XDA user with my HTC hero.
My girlfriend recently bought the Rogers Samsung Captivate, and had a few issues with it. First the battery life was only lasting half the day. Then one day, it restarted itself 5 times. Then it seemed like it was laggy. At first when she told me about the battery issue I thought, ok maybe if we put a custom ROM on, it may help. So I rooted, put clockwork recovery, then installed Assonance ROM. We seemed to have gotten rid of the lag but the random restarts seemed to persist, then she was having Sms's coming in weird, so I decided we should put it back to stock and get it back to rogers. So i tried doing a restore from clockwork, but it still has the AT&T logo, and when the phone boots, I have a black screen that says no service on the top right, and swipe screen to unlock, but it won't unlock.
All I want is this thing back to stock, no AT&T screen so I can try to warranty this thing.
Thanks in advance for any help, I've done some searching and can't seem to get this thing back to life.
Thanks,
AZ
Click to expand...
Click to collapse
Go here....http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SGH-I896
Scroll down and you will see a link to the stock Roger's ROM.
Microwave...15 seconds...you don't want to overcook
I have that, i'm trying to install it, but it's taking a long time to start installing update. I've tried reformatting everything, I've tried renaming the Rogers stock to update.zip.
any thoughts on how long it should take to install, or any better instructions on how to get back to stock?
Still stuck at installing update after 15 minutes.
also, is there go instructions on how to get rid of the AT&T Logo, or will the stock rom/firmware fix that?
Ok So, I unzipped the stock firmware and it seems to have installed, but I still get the AT&T logo, and I'm still frozen at the swipe screen to unlock section. I can't swipe at all or do anything for some reason.
AbsoluteZero said:
Ok So, I unzipped the stock firmware and it seems to have installed, but I still get the AT&T logo, and I'm still frozen at the swipe screen to unlock section. I can't swipe at all or do anything for some reason.
Click to expand...
Click to collapse
I'd just like to post that I had this exact same issue when I tried to restore to my original ROM Manager backup, and a solution would benefit both of us.
Auridran said:
I'd just like to post that I had this exact same issue when I tried to restore to my original ROM Manager backup, and a solution would benefit both of us.
Click to expand...
Click to collapse
Did you end up being able to boot ok somehow?
AbsoluteZero said:
Did you end up being able to boot ok somehow?
Click to expand...
Click to collapse
Nope. I'd always be stuck at that black lock screen unable to unlock. After one erase and restore there was a background image instead of blackness, but it didn't go any further. I just decided to stick with Assonance, but that's not really an option for you unfortunately.
so I was wrong right from the beginning, I didn't flash Assonance, i flashed Cognitionv2.3b8. Sorry for the confusion
I clipped this from the above link to the rogers stock rom.
"Be aware when installing AT&T Firmware 2.2 and trying to recover to Rogers stock, you will have a short AT&T display on boot up. One way to remove this is to flash the phone with firmware from a Samsung I9000 model and then reflash it with the Rogers Firmware. This will remove the AT&T logo. However, there is a chance that this method may, in certain circumstances, leave a seemingly random pixlation on screen upon boot-up for the time the AT&T logo was meant to be displayed. A very minor issue and doesn't affect the phone or boot process"
So try to find a stock I9000 rom I guess. The assonance rom is based off the I9000(Or at least that what it says on boot :/). I'm not sure if that will be good enough. I'm running Assonance right now on my fiance's rogers captivate. It's been working great since she has gotten it. So maybe even just flashing Assonance will fix things for you.
As a side note, I returned my x10 with a custom rom on it for warranty and I never heard from them. My understanding(hearsay) is that it doesn't even go to rogers. I'm in Ontario, and I believe it goes to a refurbishing company that is contracted by rogers where they check for water damage.
So I'm not sure where you are located but it may be the same.
(Disclaimer: I'm not saying you WONT get billed for the phone if you send it back with custom rom on it.. I'm simply saying that I didn't and I have heard of others not being as well. Perhaps we were just lucky)
Good Luck.
If you try this let me know if it works, should I ever need to send hers in for warranty.
check your pm
Ok here goes... This is my first thread post here but I am in serious need of help.
I have searched and searched the forums for a hopeful answer but I have found it difficult to find the answer I seek.
So here is the story:
Bought a GT second hand from Akihabara in Japan which was locked to NTT DoCoMo. I was using it as a WIFI only Tab and all was wonderful till my IT brain decided it could be better and I began to tinker.
I had been looking around for a way to make my Australian Virgin Mobile SIM to work on the tab and found a lot of good answers but nothing that would make it work.
I then had the brilliant idea to change the firmware with a European firmware so I could get all the features enabled from a fresh start. Which is where it all went wrong.
I first tried to flash the tab using Odin 1.7 with the P1000XXJK5 euro firmware from samfirmware.com
This failed and left my tab with the picture of a phone and a pc with a dotted line and in between them an exclamation point in a triangle.
After a lot of fiddling (I dont remember what I did but I managed to get rid of that screen had something to do with retrying the flash and it was very late last night at this point) I managed to try again but Odin just kept failing on running the updated firmware.
I then decided that it would be a good idea to run the Rotohammer firmware by following the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=895827&highlight=sc-01c
This is where I once again received errors from Odin and now my tab is somewhat bricked.
I tried reflashing but same errors every time. (I currently dont have the errors from Odin but I will update my post when I get home)
I can still get to the downloading screen (Yellow triangle with the Android digging) so I am hopeful all is not lost.
So now you have heard my sob story I will ask two questions....
1. Has anyone actually successfully flashed a Japanese model Tab?
2. My only thought/hope at the moment can anyone direct me to an original NTT DoCoMo firmware so I can at least go back to having WIFI only Tab?
Thanks in advance if you can help
Alex
Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz
I am searching the an original NTT DoCoMo firmware.
Electroboy said:
Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz
Click to expand...
Click to collapse
Oz the model is SC-01C it has a build date of 2010/12
I was thinking considering I can get into the build/download screen maybe trying an emergency firmware recovery using Kies.
Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<
I'm going to give the original firmware a go today at lunch time and I will let you know how I go. Thanks anyways for the link if all goes well I'll look at possibly trying the the koxudaxi kernel.
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
UPDATE: Still getting the same problems using heimdall to flash the tab. Any suggestions as to what I could do next?
Recovering a Docomo Tab
I'm currently running Overcome v1.1.3 ROM and richardtrip's V15 kernel on my SC-01C.
acont said:
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
Click to expand...
Click to collapse
You're getting this error from Heimdall, right? Have you tried Odin 1.7?
Here's how I recovered my Tab using Odin:
1. Following the instructions in http://forum.xda-developers.com/showthread.php?t=895827, specify the P1_add_hidden.pit in the PIT button and select Re-Partition.
2. Specify the stock Docomo ROM when pressing the PDA button.
3. Ignore the Phone and CSC buttons, as the stock ROM already contain these items.
You should be able to restore your Tab to stock settings using this procedure.
If this doesn't work, you might want to check if the USB connection to your PC is ok, and if everything necessary to run Odin is installed on your PC.
Bugger!
Well thanks for your help all of you but I think I have just made matters worse.
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
I can't boot into download mode and I can hold down the power button till I turn blue in the face... So as Bones would say "It's dead Jim"
Unless any of you have anything else I could try as a last ditch shot I might just have to ship it back to Japan and get them to fix it or maybe try Samsung here in Oz.
Serves me right
Thanks again.
acont said:
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Click to expand...
Click to collapse
What exactly happened?
The SC01COMJK2 firmware does not contain protected bootloaders, by the way.
acont said:
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
Click to expand...
Click to collapse
I've heard about this happening when the battery runs out. Try connecting the Tab to your PC (not your AC adapter) and let it trickle-charge for an hour or so. If successful, you should see the download screen.
fury1sog unfortunately that didnt work
spoke to the samsung repairers here in Aus and they said they can take a look at it for me hopefully bring life back into my unit and then I will never touch it again
Any thoughts?
Hopefully this post is still being looked at but has anyone got any ideas as to what I could do before I fork out $374 to my tab repaired by Samsung Australia?
According to the repair guys its a faulty board (not an idiot that tried to flash it) and needs to be replaced. Not sure if this is worth my trouble considering I could buy a brand new tab for $599.
There is a positive out of this, the MB will be an Australian MB and I will have a working "Australian" tab instead of the Japanese version.
Considering the unfortunate tragedy in Japan I am not sure I should try and get my friend in Japan to fix it for me.
Thoughts anyone?
I know someone who can unlock it, I have mine unlocked by them.
I was afraid of flashing it myself so I paid to have it unlocked, cost was $20.
I think you better go for the MB replacement, it's cheaper.
For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.
zetsurin said:
Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<
Click to expand...
Click to collapse
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.
also used heimdall. starts downloading. but stuck almost at the end of the tab's progress bar.
argh...
me too ! samsung galaxy tab m180 Korean .... huhu
What ROM is best for a SC-01C?
Hi Guys
I picked up a 2nd hand SC-01C from Yahoo Auction, and am wondering what the best ROM to use with it is...
Looks like this guy has got an Overcome ROM on it OK, (http://chaki-ramone.blogspot.com/2011/06/galaxytabsc-01cgingerbreadromovercome.html), so I wonder if the latest version (http://forum.xda-developers.com/showthread.php?t=1205990) will work OK - anyone tried? (is the SC-01C a GSM-based model??)
I'm not going to use a SIM with it, so I'm not bothered about unlocking - but just want it rooted & want a good balance between speed & battery life. If you were going from scratch with an SC-01C, what would you do? Any suggestions greatfully received!
Thanks in advance?
PS - I'm an iPhone / iPad / Ideos 8150 / Notion Ink Adam owner, all jailbroken / rooted. So I'm not scared about rooting per-se, just worried about trying something that will not work because of anything docomo has done to the Tab!
Acont you could be coma bricked try pluginging it into THE MAINS for at least 4 hours if nothing come up your hard bricked.
Sent from my GT-P1000 using XDA Premium App
zetsurin said:
For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.
Click to expand...
Click to collapse
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..
huylang280285 said:
me too ! samsung galaxy tab m180 Korean .... huhu
Click to expand...
Click to collapse
unbricking M180 is done long time ago
Here is a video for you
http://www.ort-jtag.com/blog/?e=15
udhtari said:
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..
Click to expand...
Click to collapse
What about this P1000R , what is special or different ?
I know P1000L was for south american edition !
lemmy_0 said:
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.
Click to expand...
Click to collapse
Docomo solution is very soon !
That TAB need JTAGging thats the only way ..
I have the good and dead device in hand , we will release for ORT-JTAG probably this week ..
Best Regards
Oz.
So I was retarded and followed the instructions (or started to) on androidadvices dot com/how-to-update-samsung-galaxy-tab-to-stable-gingerbread-2-3-3-firmware
My Tablet will not boot past the T-Mobile logo.......... they are being assholes and telling me i need to deal with samsung ......... who told me it would be 6-8 weeks for a replacement........ is there ANYONE out there that can help me with just resetting it???
If you can get to the T_Mobile logo, you probably have a working bootloader and that mean you just need to flash the correct firmware for you device.
In short words, go to samfirmware.com and download the right firmware for your tablet model.
Once you have the firmware, flash them to your tablet with 'odin' (flash software, that you can also get in the mentioned website).
This should solve the problem.
If this works I will love you.
So i am obviously more retarded than I thought pedrohfsd ........ I have an SGH-T849 and i cannot FIND the firmware on that site..... seriously? UGH
pm me i'll tell you what to do , with th stock firmware for Tmobile , i helped someone before 2days he had same tab with you ) and same problem
pedrohfsd said:
If you can get to the T_Mobile logo, you probably have a working bootloader and that mean you just need to flash the correct firmware for you device.
In short words, go to samfirmware.com and download the right firmware for your tablet model.
Once you have the firmware, flash them to your tablet with 'odin' (flash software, that you can also get in the mentioned website).
This should solve the problem.
Click to expand...
Click to collapse
You sir, are brilliant.
I wasn't able to locate the firmware on the samfirmware.com but I DID find it on XDA from another user. Put phone into download mode... waited till the little box in Odin turned yellow and loaded that badboy on there. After about 5 minutes it was back into the 2.2 OS again. The only problem that I had was with programs that had been installed before and loaded at boot (Just had to uninstall / reinstall) But for the most part its back to the way it was.
Thanks so much for your help!
You too Kosh, as I am sure you were going to walk me through exactly what I fumbled through on my own (I'm lucky I didn't blow anything up haha)
NO more attempts to get 2.3 on this badboy!
Thanks again all <3
I'm glad to hear that KalKainen, the first time i soft bricked my phone i got desperate too.
But after some weeks i saw the inumerous progressions that people develop in custom roms here in xda, and flashed the whole thing again =P.
pedrohfsd said:
I'm glad to hear that KalKainen, the first time i soft bricked my phone i got desperate too.
But after some weeks i saw the inumerous progressions that people develop in custom roms here in xda, and flashed the whole thing again =P.
Click to expand...
Click to collapse
Amen man..... desprate is about right.. haha... now if i could only figure out why i have to CONSTANTLY reboot it in order to restore network service (Even though I have 3g and full bars... no text messages send / come in and programs that use data error out... ) I would be happy. This has been happening for the last 4 months badly enough that I can have to reset it 10 times in a 2 hour period >.< I cant even put it into flight mode.... but after I TRY putting it into flight mode and then reboot it... it comes BACK in flight mode.... I hoped the reinstall of the firmware would fix it.. but alas..... still plagued. AT LEAST IT WORKS THOUGH!!
y helo thar :3
Okay, to sum it up, today I bought a used Bell Samsung GT-i9000M and realized that the owner never updated his phone to Gingerbread (2.3) from his current version of 2.1. Basically, I did the same procedure as in THIS (EDIT: I think I just realized that the stops shown in that link, having next to nothing to do with updating your phone to 2.3 - kjawekjawen - post still stands, of course) post.
In Odin, everything seemed like a success, until (after Odin labeled it as a success apparently) my phone just started rebooting and rebooting, not getting past the first booting screen (that first black screen showing Samsung i9000 logo, I think).
I can still access the download mode, but my phone just doesn't boot up anymore (gets stuck on this same logo and just keeps restarting 'til the pigs come round).
I'm just afraid to do anything with my phone right nao. Consisder the fact that I am pretty much a noob in this whole hackz0r, elite department of the internets and cellphones. I would love (no homo, hurhurhur) for somebody to assist me through this, because I don't want to end up turning my cellphone into something resembling a clay brick.
:3
Thanks in advance for whoever could help me.
PROBLEM SOLVED: http://androidadvices.com/update-samsung-galaxy-gt-i9000-gingerbread-xxjvr-234-firmware/6/