Question for x8 gods - XPERIA X8 Q&A, Help & Troubleshooting

I start from begin because it was to laggy.
Now I installed 2.1. and i rooted my x8.
Then i installed xrecovery and i wanted to install gcr. 8. and 8.1. but it just restart.
Then i tried with gingerDX and happend the same.
I ve tried full wipe but didnt help.
Help please​

Check your baseband, maybe accidentaly you installed old one
Sent from my X8 using XDA App

Install cwm and try with it, because gdx must be installed with it and also you can install gc8. 1 with it, i know because i did it
Sent from my X8 using XDA App

dsaklein said:
Check your baseband, maybe accidentaly you installed old one
Sent from my X8 using XDA App
Click to expand...
Click to collapse
Good advice, check your baseband, it must end on "015", as stated in the tutorials.
Install GingerDX only via CWM.
Do a full wipe and then install the rom, it should work.

Tomislav995 said:
I start from begin because it was to laggy.
Now I installed 2.1. and i rooted my x8.
Then i installed xrecovery and i wanted to install gcr. 8. and 8.1. but it just restart.
Then i tried with gingerDX and happend the same.
I ve tried full wipe but didnt help.
Help please​
Click to expand...
Click to collapse
hi try flashing froyobread v021 as this will give you cwm as gdx will only install with cwm not x-recovery when you have installed froyobread reboot you x8. when you see the sony ericsson logo tap the screen repeatedly this will take you in to cwm now you can install gdx.v019

unlock bootloader
maybe try to unlock bootloader using msm7227_semc.cmd
http://forum.xda-developers.com/showthread.php?t=1254225

thanks guys but I have buyed

Related

[Q] Rescue Me (X8 stuck in Boot screen)

Hi. I've Xperia X8 : Rooted, downloaded rom (miniCM7 2.0.7) and all this in CWM.
I tried to install GingerDX but you know GingerDX need xRecovery not CWM so i searched to install xRecovery then I found this apk app( http://forum.xda-developers.com/showthread.php?t=1128854 ) i installed it and installed xRecovery and everything ok BUT when i rebooted my phone my phone stuck in the Boot screen (Sony Ericsson) and nothing new! HELPP PLEASEthxxxx all
Umm, maybe you can try repairing with PCC or SEUS.
Can you still get to xrecovery?
If yes, you can restore a backup with it.
If not, then flash the stock ROM again with Flashtool/SEUS/PCC
And the next time you want to install GingerDx, install the Dual Mode Recovery, it´s very easy, just search for it.
mmm
Well, i wanted xRecovery, but now im scared i want to find a good tutorial on the forum but i dont know, can someone recommend me one that is good for my xperia x8
@Himalay & @codfreak thxx I softwared my phone and everything is ok.
Now I installed xRecovery again (root, busybox, root explorer and I moved all to system/bin ) but when I rebooted my phone and when I pressed the back button its stuck again in logo screen, but when I don't press the back button its start without stucks! Any help ?
Sent from my E15i using XDA App
iLilDark said:
@Himalay & @codfreak thxx I softwared my phone and everything is ok.
Now I installed xRecovery again (root, busybox, root explorer and I moved all to system/bin ) but when I rebooted my phone and when I pressed the back button its stuck again in logo screen, but when I don't press the back button its start without stucks! Any help ?
Sent from my E15i using XDA App
Click to expand...
Click to collapse
I recommend sticking to CM7. I tried flashing gingerdx yesterday too...way too many probs just to flash 1 rom
Sent from my X8 using XDA App
My Friend was trying use SEUS and it's work... you only follow the SEUS instruction for restore it... and important u need Connection Internet
bumenoo said:
My Friend was trying use SEUS and it's work... you only follow the SEUS instruction for restore it... and important u need Connection Internet
Click to expand...
Click to collapse
If im not mistaken, you update/repair via SEUS, right ?
Sent from my X8 using XDA App
Yup.. that's right... you can restore your phone use SEUS or Flash

[Q] GingerXperiaV8 installation

Good evening!
Sorry if I missed something, but can somebody please tell me directly HOW TO FLASH GingerXperiaV8??? With Xrecovery or with CWM?
I have a bootloop at SE logo. Can't access xRecovery or CWM. Had to use PCC again.
Thanks in advance...
Done with CWM No problem. Do a Full wipe.
how can i install CWM recovery on my xperia ?
didint find it =(
I flashed ROM with CWM this time, before and after I did a full wipe. Still no result. Stuck at SE logo.
Any suggestions?
xdkabeza said:
how can i install CWM recovery on my xperia ?
didint find it =(
Click to expand...
Click to collapse
There is a uiversal tool on forum it just search threads...
Sent from my E15i using XDA App
This subject is now being discussed in XPERIA X8 Android Development under GingerXperia V8 thread!!!
Strange.. worked 4 me in both Xrecovery and CWM.
Can u goto xrocovery??
I install gingerxperia v8 with xRecovery. No problem.
Me is how I did.
I installed kernel LinuxDX v4. Then I installed GingerDX v17 with CMW. Then I installed stock kernel and I booted with xRecovery and I format system, DATA and CACHE. And I installed GingerXperia. Good luck.
Deleted..
sent from my digital typewriter

[Q] (HELP) Every rom crashes on my phone!!!

I don't know why but when I reboot the phone after installing a rom, my x8 chrash!!!!! WHY??????????'
lucasiumej said:
I don't know why but when I reboot the phone after installing a rom, my x8 chrash!!!!! WHY??????????'
Click to expand...
Click to collapse
did you try full wipe?
baseband number?
My baseband finish with 15
Sent from my E15i using XDA App
In the past, I installed many rom...but now every one chrash ( sorry for bad english)
Sent from my E15i using XDA App
i think you must going to first again ;
back up your data -> go back to stock with SEUS or flash offline,,root again,install CWM,then flash the custom rom.
lucasiumej said:
I don't know why but when I reboot the phone after installing a rom, my x8 chrash!!!!! WHY??????????'
Click to expand...
Click to collapse
diff roms needs to be Installed with diff recovery menu, and always do a fullwipe before and after installing,mayb u installed a rom which need to be installed with a diff recovery?
u're same as me ..i tried every rom but all the roms crashes or is too lag to even use ...i gave up on them and use stock rom =)
Reinstall to 2.1. Full-Wipe then Root,Install REcovery install any Rom u desire and after that full-wipe and done.

GingerDX v030 stuck at splash screen

I searched a lot in all threads to find a similar question or just an answer to my problem.
To start I have to tell you that I already had the v029 installed with the stock kernel and everything was fine.
Then I wanted to check some other roms and if they fit me better. So i got it from the begining. Wiped everything and installed the stock eclair with PCC. Unlocked the bootloader through a very usefull guide found here and flashed the latest nAa kernel. Then I downloaded the MiniCM9 3.0.5 Rom and installed it succesfully.
Everything is working fine but I wanted to go back to GingerDX. So I did a factory reset/wiped everything downloaded the rom for the nAa kernel and installed it. It said that it was successfuly installed. But when I try to boot my phone It stucks on the GingerDX splash screen with the animation and doing nothing. No keys working. I removed the battery to shut down, install the CM9 rom again and everything's fine.
Can you please tell what am I doing wrong? Thanks in advance.
Toumpeki said:
I searched a lot in all threads to find a similar question or just an answer to my problem.
To start I have to tell you that I already had the v029 installed with the stock kernel and everything was fine.
Then I wanted to check some other roms and if they fit me better. So i got it from the begining. Wiped everything and installed the stock eclair with PCC. Unlocked the bootloader through a very usefull guide found here and flashed the latest nAa kernel. Then I downloaded the MiniCM9 3.0.5 Rom and installed it succesfully.
Everything is working fine but I wanted to go back to GingerDX. So I did a factory reset/wiped everything downloaded the rom for the nAa kernel and installed it. It said that it was successfuly installed. But when I try to boot my phone It stucks on the GingerDX splash screen with the animation and doing nothing. No keys working. I removed the battery to shut down, install the CM9 rom again and everything's fine.
Can you please tell what am I doing wrong? Thanks in advance.
Click to expand...
Click to collapse
Wipe cache & dalvik cache while before installing
Sent from my X8 using xda app-developers app
I did and it's stuck again. I waited for 10 minutes before I closed it.
Does the kernel for CM9 supports gb?
Sent from my X8 using xda app-developers app
Wipe cache
dalvik cache
and fix permision
I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.
Toumpeki said:
I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.
Click to expand...
Click to collapse
There is a thanks button...
Press it
Sent from my X8 using xda app-developers app
Toumpeki said:
I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.
Click to expand...
Click to collapse
Any luck? I just installed the kernel on the link you posted and have the exact same problem. The boot screen stays on the splash animation. It's been there for more than 15 minutes and the animation itself is slow as hell.
Hi there..
When we switch between GB and JB kernels we must format /system /data and /cache when we flash the new kernel.
Yes, I flashed the kernel in the link and then the gingerdx rom. I did the wipe in data/cache/dalvik cache and everything else that is needed.
The only thing that occured was a problem in the format during the installation. I formated it manually before the install and it was ok.
Sent from my X8 using xda app-developers app GingerDX
sacoplastico said:
Any luck? I just installed the kernel on the link you posted and have the exact same problem. The boot screen stays on the splash animation. It's been there for more than 15 minutes and the animation itself is slow as hell.
Click to expand...
Click to collapse
Full wipe before installing.
Yes..
there must be a problem with wiping...
You might have forgot to full wipe..
Thank you everybody, I finally managed to get GingerDX running. Wiping everything actually worked.
Still took ages to boot but it is finally on!
Maybe u need naa ics kernel.
Sent from my iXperiA 8s using xda app-developers app
erulsza said:
Maybe u need naa ics kernel.
Sent from my iXperiA 8s using xda app-developers app
Click to expand...
Click to collapse
No, you cant flash gb roms with ics kernels.

[Q] GingerDX v030 to v31b bricked my X8 - help?

I've searched through XDA (manually and with search function) but can't find the answer I need, so am trying here hoping someone will help.
I was running GingerDX v29 on my X8, happily, when I was notified of an update to v030. I left it a few days and then got the notification of an update to v031b. There was two options on the screen: Download GingerDX v031b, or download GingerDX stock. I figured since I'm already using GingerDX I should be able to just download the new version rather than the stock.
So I downloaded it to my SD card, rebooted to CWM and choose to install the download. All seemed to go through fine, I got a success message, and was invite to reboot. I rebooted, and I'm now stuck with "Sony Ericsson" across my screen and nothing else. No access to CWM etc.
I guess I have two questions:
1) Can I get back to v29 or finish off the update to v031b, without having to erase everything and redo whatever it was I had to do to get v29 on there in the first place (v29 was the first ROM I installed on my handset)?
2) What should I have done when presented with the options for upgrading? (I'd kinda like to acoid the same mistake in future.)
All help gratefully received, and I'll be liberal with the Thanks button
TIA
in CWM wipe cache and dalvk cache
if phone doesnt boot flash v29 back and create backup
than flash 31b,wipe data/cache and advance restore data from backup created earlier...wipe cache again
good luck
and post questions in Q/A section
fotak-x said:
in CWM wipe cache and dalvk cache
Click to expand...
Click to collapse
Unfortunately I'm stuck at the Sony Ericsson screen and can't get to CWM...
Thanks though.
(Can a moderator move this to the right forum if this is the wrong one?)
pgd80 said:
I've searched through XDA (manually and with search function) but can't find the answer I need, so am trying here hoping someone will help.
I was running GingerDX v29 on my X8, happily, when I was notified of an update to v030. I left it a few days and then got the notification of an update to v031b. There was two options on the screen: Download GingerDX v031b, or download GingerDX stock. I figured since I'm already using GingerDX I should be able to just download the new version rather than the stock.
So I downloaded it to my SD card, rebooted to CWM and choose to install the download. All seemed to go through fine, I got a success message, and was invite to reboot. I rebooted, and I'm now stuck with "Sony Ericsson" across my screen and nothing else. No access to CWM etc.
I guess I have two questions:
1) Can I get back to v29 or finish off the update to v031b, without having to erase everything and redo whatever it was I had to do to get v29 on there in the first place (v29 was the first ROM I installed on my handset)?
2) What should I have done when presented with the options for upgrading? (I'd kinda like to acoid the same mistake in future.)
All help gratefully received, and I'll be liberal with the Thanks button
TIA
Click to expand...
Click to collapse
Are you using a custom or stock kernel?
Sent from my GT-I9100 using xda premium
Titan9119 said:
Are you using a custom or stock kernel?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
"sony ericsson" logo on boot...thats stock kernel
Yeah, I think it's stock (I soft-bricked the handset once before, and followed instructions elsewhere on XDA to unbrick it - I think those instructions used a stock kernal)
Sent from my Transformer TF101 using xda app-developers app
pgd80 said:
Yeah, I think it's stock (I soft-bricked the handset once before, and followed instructions elsewhere on XDA to unbrick it - I think those instructions used a stock kernal)
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
Hmm...then did u wipe data/cache?
Sent from my GT-I9100 using xda premium
pgd80 said:
I've searched through XDA (manually and with search function) but can't find the answer I need, so am trying here hoping someone will help.
I was running GingerDX v29 on my X8, happily, when I was notified of an update to v030. I left it a few days and then got the notification of an update to v031b. There was two options on the screen: Download GingerDX v031b, or download GingerDX stock. I figured since I'm already using GingerDX I should be able to just download the new version rather than the stock.
So I downloaded it to my SD card, rebooted to CWM and choose to install the download. All seemed to go through fine, I got a success message, and was invite to reboot. I rebooted, and I'm now stuck with "Sony Ericsson" across my screen and nothing else. No access to CWM etc.
I guess I have two questions:
1) Can I get back to v29 or finish off the update to v031b, without having to erase everything and redo whatever it was I had to do to get v29 on there in the first place (v29 was the first ROM I installed on my handset)?
2) What should I have done when presented with the options for upgrading? (I'd kinda like to acoid the same mistake in future.)
All help gratefully received, and I'll be liberal with the Thanks button
TIA
Click to expand...
Click to collapse
you should have downloaded gingerdx for stock since you are on stock kernel. i guess gingerdx stock means the one for stock kernel
Titan9119 said:
Hmm...then did u wipe data/cache?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I think I did (as part of the v029 install (or maybe it was the v030 install - I can't even remember which one of those I was on)), but I can't say for sure. I definitely didn't when I tried to update to v031b. I just ran the .zip and when I got the confirmation of success I rebooted. Haven't got passed the Sony Ericsson logo since.
CnC-ROCK said:
you should have downloaded gingerdx for stock since you are on stock kernel. i guess gingerdx stock means the one for stock kernel
Click to expand...
Click to collapse
What would I need to have been running in order to have used the GingerDX v31b? (Sorry - I'm still learning about stock, kernels, ROMs, Alfs, nAa etc, so don't yet understand what they all mean / do / are used for.)
Is there any way I can recover my phone without having to reinstall all my apps etc?
pgd80 said:
What would I need to have been running in order to have used the GingerDX v31b? (Sorry - I'm still learning about stock, kernels, ROMs, Alfs, nAa etc, so don't yet understand what they all mean / do / are used for.)
Is there any way I can recover my phone without having to reinstall all my apps etc?
Click to expand...
Click to collapse
you have unlocked bootloader? if so then flash custom kernel and it will boot fine.
you can use adb to backup your apps or flash back the previous version and backup them.
you might have downloaded the rom that was not for stock kernel.
your phone is soft bricked, can be repaired using sony pc companion.
Look for a thread to repair a soft bricked phone.
its so easy..
i am stuck for 2 day. i do for many way for disolve my problem. stuck in logo sony, because i wipe, and i dont install new/custom kernel.
i want install jelly bean
many flash i tried cannot fix this problem
for last step, i download latest "pc companion"
and i follow step by step.
fail and try. error and try.
failed connect and i try..
(i forget my capacity baterries is low)
and bla bla bla....... pc companion can fix this problem
with factory kernel
and factory os: "ENCLAIR" KKKKKKKK
ending of stories ... i install again with rom ginger
i hope can solve your problem
i bricked my phone installing stock gingerdx to custom rom.... sm1 plz help... wifi nt working cmw nt working.. is my x8 lost
x8bricked said:
i bricked my phone installing stock gingerdx to custom rom.... sm1 plz help... wifi nt working cmw nt working.. is my x8 lost
Click to expand...
Click to collapse
Post #2
http://forum.xda-developers.com/showthread.php?t=1481630
sent using internet explorer, hope it reaches on time :fingers-crossed:
my phone is only nt getting detected in sony pc companion
x8bricked said:
my phone is only nt getting detected in sony pc companion
Click to expand...
Click to collapse
Use flashtool
sent using internet explorer, hope it reaches on time :fingers-crossed:
Gogeta said:
Use flashtool
sent using internet explorer, hope it reaches on time :fingers-crossed:
Click to expand...
Click to collapse
flash tool is aborting with error msg
---------- Post added at 05:21 PM ---------- Previous post was at 05:17 PM ----------
Gogeta said:
Post #2
http://forum.xda-developers.com/showthread.php?t=1481630
i tried it bt still my device is nt properly installed plz help
Click to expand...
Click to collapse

Categories

Resources