Database Develop

[Q] Can't OC with Setcpu + Speedmod K13C (Conservative governor)

My problem basically is that setting conservative governor (recommended for SGS) i can't get over 1000mhz. With performance i get 12800mhz, which is my goal and it's stable but it won't change so it kills my batery.
The other options won't work, ondemand is unstable (locks my phone), powersave keeps 100mhz and userspace won't change the rate.
So how can i be able to get 12800mhz in conservative governor in SGS?
Thanks and sorry for my bad english, i speak spanish actually

Any one please?
Sent from my GT-I9000B using XDA App

You need a OC kernel ... speedmod as a basic kernel just has the cpu stepping changed ... but does not enable OC
you might try this kernel
http://forum.xda-developers.com/showthread.php?t=965103

broken64 said:
So how can i be able to get 12800mhz in conservative governor in SGS?
Click to expand...
Click to collapse
If you are able to really get the 12800Mhz share it pls with screenies. I am not sure that even desktop records are that high. But good luck on that

Here you have. I'm getting 12800mhz in a Modded version of SpeedMod that allows you to overclock. Official version does not allow you to oc.
But the problem is that in conservative governor won't go more than 1000mhz.

broken64 said:
Here you have. I'm getting 12800mhz in a Modded version of SpeedMod that allows you to overclock. Official version does not allow you to oc.
But the problem is that in conservative governor won't go more than 1000mhz.
Click to expand...
Click to collapse
Well I am still seeing there 1280 and NOT yours 12800
But ok

oh ok i'm sorry xD added one 0
Anyone knows how to set convervative govertor to max: 1280mhz??

Hey, man.
Use voltage control app and set the maximum clock to 1280.
You should have the i9000b variant, just like me. I'm using this kernel too and overclock my phone easy with setcpu and conservative governor.
The Voltage Control app you can get from market.
Hope this helps.
Just to mention, I wanna could put the vcore higher than 1.3v to achieve 1400 mhz, but the limit is 1.3. That is so sad.

[Q] Which is the most recommended Governor

I'm using emanoN V4 with No-Frills, and since CM7.1 with SetCPU, I always used 'ondemand' as Governor.
But reading other posts on other devices forums about this, some people say SmartassV2 is the best...
So, as each device is different (specially by the ARM version and manufacturer), I decided to begin this conversation here, and listen to what people with the same device as me has to say about it.
So which Governor do you consider the best for SGM?

Im using cm7.2, setting at nofrilis Governor : SavagedZen io : sio and undervolt at cm setting, give more battery life.
Sory for bad english
Squadzone my idols

felipevsw said:
I'm using emanoN V4 with No-Frills, and since CM7.1 with SetCPU, I always used 'ondemand' as Governor.
But reading other posts on other devices forums about this, some people say SmartassV2 is the best...
So, as each device is different (specially by the ARM version and manufacturer), I decided to begin this conversation here, and listen to what people with the same device as me has to say about it.
So which Governor do you consider the best for SGM?
Click to expand...
Click to collapse
sio if u need less laggy n smooth

v-mix said:
sio if u need less laggy n smooth
Click to expand...
Click to collapse
Thanks for the reply, but as I can see on No-Frills, sio is th I/O Scheduler, that is already set. I'm asking here about the Governor.

Ondemand and set noop
Sent from my GT-S5570 using xda premium

on emanonV4 i use Smartassv2 nd i/o noop

I see that people are very divided between ondemand and SmartassV2.
Now with sio and noop as I/O Scheduler.
Anyone else would like to share?

i will say ondemand because cpu will be set at lowest frequency and when you need it it will set at higher frquency which will save your battery and if you want performance then no lag will be good

The principle of the ondemand governor I'd already figured out (and actually didn't like it, very rough).
I would like to hear more about the principle of the SmartassV2, whereas since this morning I'm using SmartassV2 + noop and I noticed my SGM way smoother than with ondemand + sio.
Now is wait and see if the battery is sucked more.

felipevsw said:
The principle of the ondemand governor I'd already figured out (and actually didn't like it, very rough).
I would like to hear more about the principle of the SmartassV2, whereas since this morning I'm using SmartassV2 + noop and I noticed my SGM way smoother than with ondemand + sio.
Now is wait and see if the battery is sucked more.
Click to expand...
Click to collapse
smartassV2 is a re-working of the original smartass governor, it allows for the CPU to scale through all frequencies from the lowest you set to the highest, based on the load occuring. Basically it scales CPU based on realtime needs of the system, saV2 supposedly incorporates some more agressive settings for screen off, and I believe quicker scaling than the original smartass.

dhlalit11 said:
smartassV2 is a re-working of the original smartass governor, it allows for the CPU to scale through all frequencies from the lowest you set to the highest, based on the load occuring. Basically it scales CPU based on realtime needs of the system, saV2 supposedly incorporates some more agressive settings for screen off, and I believe quicker scaling than the original smartass.
Click to expand...
Click to collapse
Thanks a lot, man! And now I think that I had made my choice:
Governor: SmartassV2
I/O Scheduler: noop
Highly recommended!

Learning something about governers

What's new:-
added wheatley governor
added hotplug governor
added lionheart
added lionheartx
added Scary governor
added SavagedZen governot
Working of governers
WHEATLEY:- this is yet another governor for the users who want to save battery as much as they can
The governor intelligently set the frequencies according the usage of the CPU, if the usage is high then frequency will also be high and when usage is low it will set the low frequency
This governor is made by doing changes in the ondemand governor and can be used in the place of conservative
Click to expand...
Click to collapse
HOTPLUG:- The “hotplug” governor scales CPU frequency based on load, similar to“ondemand”. It scales up to the highest frequency when “up_threshold”is crossed and scales down one frequency at a time when “down_threshold”is crossed. Unlike those governors, target frequencies are determinedby directly accessing the CPUfreq frequency table, instead of takingsome percentage of maximum available frequency.
The key difference in the “hotplug” governor is that it will disableauxillary CPUs when the system is very idle, and enable them again oncethe system becomes busy. This is achieved by averaging load overmultiple sampling periods; if CPUs were online or offlined based on asingle sampling period then thrashing will occur
Sysfs entries exist for “hotplug_in_sampling_periods” and for“hotplug_out_sampling_periods” which determine how many consecutiveperiods get averaged to determine if auxillery CPUs should be onlined orofflined. Defaults are 5 periods and 20 periods respectively.Otherwise the standard sysfs entries you might find for “ondemand” and“conservative” governors are there.
Click to expand...
Click to collapse
LIONHEARTX:- LionheartX is based on Lionheart but has a few changes on the tunables and features a suspend profile based on Smartass governor.
Click to expand...
Click to collapse
LIONHEART:- Lionheart is a conservative-based governor which is based on samsung's update3 source. Tweaks comes from 1) Knzo 2) Morfic. The original idea comes from Netarchy. See here. The tunables (such as the thresholds and sampling rate) were changed so the governor behaves more like the performance one, at the cost of battery as the scaling is very aggressive.
Click to expand...
Click to collapse
SCARY:- This is just a weird governor. It's based on Conservative which has a slower ramping than Ondemand butthen again it has Smartass elements which is a governor with one the fastest rampings.
Click to expand...
Click to collapse
SAVAGED ZEN:- Another Smartass-based kernel with many modifications aiming to attain both better battery and performance.
Click to expand...
Click to collapse
LULZACTIVE:- This new find from Tegrak is based on Interactive & Smartass governors and is one of the favorites. When workload is greater than or equal to 60%, the governor scales up CPU to next higher step. When workload is less than 60%, governor scales down CPU to next lower step. When screen is off, frequency is locked to global scaling minimum frequency.
Click to expand...
Click to collapse
INTELLIDEMAND:- Intellidemand aka Intelligent Ondemand from Faux is yet another governor that's based on ondemand. Unlike what some usersbelieve, this governor is not the replacement for OC Daemon (Having different governors for sleep and awake). The original intellidemand behaves differently according to GPU usage. When GPUis really busy (gaming, maps, benchmarking, etc) intellidemand behaves like ondemand. When GPU is 'idling' (or moderately busy), intellidemand limits max frequency to a step depending on frequencies available in your device/kernel for saving battery. This is called browsing mode.
Click to expand...
Click to collapse
ONDEMAND X:- governor code from latest linux (3.0 at the moment) source *plus* the suspend/wake logic. No further optimization is done.
Click to expand...
Click to collapse
ONDEMAND:- Available in most kernels, and the default governor in most kernels. When the CPU load reaches a certain point (see “up threshold” in Advanced Settings), ondemand will rapidly scale the CPU up to meet demand, then gradually scale the CPU down when it isn't needed.
Click to expand...
Click to collapse
INTERACTIVE:- Available in newer kernels, and becoming the default scaling option in some official Android kernels. The interactive governor is functionally similar to theondemand governor with an even greater focus on responsiveness.
Click to expand...
Click to collapse
CONSERVATIVE:- Available in some kernels. It is similar to the ondemand governor, but will scale the CPU up more gradually to better fit demand. Conservative provides a less responsive experience than ondemand, but can save battery.
Click to expand...
Click to collapse
PERFORMANCE:- Available in most kernels. It will keep the CPU running at the “max” set value at all times. This is a bit more efficient than simply setting “max” and “min” to thesame value and using ondemand because the system will not waste resources scanning for CPU load.
Click to expand...
Click to collapse
POWERSAVE:- Available in some kernels. It will keep the CPU running at the “min” set value at all times.
Click to expand...
Click to collapse
USERSPACE:- A method for controllingthe CPU speed that isn't currently used by SetCPU. For best results, donot use the userspace governor.
Click to expand...
Click to collapse
SAMRTASS:- Included in some customkernels. The smartass governor effectively gives the phone an automatic Screen Off profile, keeping speeds at a minimum when the phone is idle.
Click to expand...
Click to collapse
ALWAYS MAX:- The Performance “governor”, called “Always Max” on previous versions of SetCPU, allows your phone to run at maximum speed, ignoring all power saving functions.
Click to expand...
Click to collapse
SMOOTHASS:- The same as the Smartass “governor” But MUCH moreaggressive & across the board this one has a better battery life that is about a third better than stock KERNEL.
Click to expand...
Click to collapse
INTERACTIVEX:- The same thing as interactive but it clocks the cpu downto 300mhz in sleep mode.
Click to expand...
Click to collapse
SMARTASS V2:- Is a re-working of the original smartass governor, it allows for the CPU to scale through all frequencies from the lowest you set to the highest, based on the load occuring. Basically it scales CPU based on realtime needs of the system, saV2 supposedly incorporates some more agressive settings for screen off, and I believe quicker scaling than the original smartass.
Click to expand...
Click to collapse
BRAZILIANWAX:- Similar to smartassV2. More aggressive ramping, so more performance, less battery.
Click to expand...
Click to collapse
LAG FREE:- This driver is rather similar to the 'ondemand' governor both in its source code and its purpose, the difference is its optimization for better suitability in a battery powered environment. The frequencyis gracefully increased and decreased rather than jumping to 100% when speed is required.
Click to expand...
Click to collapse
MIN/MAX:- stays at minimum speed until more speed is needed then goes straight to highest speed.
Click to expand...
Click to collapse
APPLY THESE GOVERNERS WISELY

where can i get SMARTASS V2?
i use No-frill but don't have it..

marKyAn said:
where can i get SMARTASS V2?
i use No-frill but don't have it..
Click to expand...
Click to collapse
developer of the kernel have to add the governor to kernel

marKyAn said:
where can i get SMARTASS V2?
i use No-frill but don't have it..
Click to expand...
Click to collapse
It depends on the OC kernel if the developer included it. Are you using a custom ROM? SMARTASS V2 is the default governor of CM7 RC0 by subpsyke. :

Guys if you need ny info about any governor then please write it here and i will add that

dhlalit11 said:
Guys if you need ny info about any governor then please write it here and i will add that
Click to expand...
Click to collapse
Would appreciate if you can add the custom kernel by squad, lilgv2.. and its difference with smartassv2..
Sent from my GT-S5570 using XDA App

kitrax59 said:
Would appreciate if you can add the custom kernel by squad, lilgv2.. and its difference with smartassv2..
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
+1
Sent from my GT-S5570 using XDA App

Anass Ahmed said:
+1
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
i have seen that many people are looking for the info about lilgv2 but it is device specific and specially created by squadzone for gmini
so i have contacted squadzone for the info but didn't get any reply yet
when i get reply i will add it here so please wait for some time

Thx a lot, i was always using performance and my battery was draining really fast.
Sent from my GT-S5570L using XDA App

gumball3000 said:
Thx a lot, i was always using performance and my battery was draining really fast.
Sent from my GT-S5570L using XDA App
Click to expand...
Click to collapse
why just saying thanks why not pressing it

dhlalit11 said:
why just saying thanks why not pressing it
Click to expand...
Click to collapse
Because we use XDA app and there's no thanks button in it!
Sent from my GT-S5570 using XDA App

I am using the xda app, i don't think it's possible. Ill give you a like if you really want.
Sent from my GT-S5570L using XDA App

To reply thanks is just simple.
Tap on particular post and choose ur options

marKyAn said:
where can i get SMARTASS V2?
i use No-frill but don't have it..
Click to expand...
Click to collapse
Flash emanoN. It already includes that.

Nice thread I always wanted to know more about the governors. Thanks

sufacs surety.
android1999 said:
Flash emanoN. It already includes that.
Click to expand...
Click to collapse
also included by default in the new CM Music_Edition_v3

What is the difference btween ondemand and ondemandX?
Sent from my GT-S5570 using xda premium

Kaustubh_93 said:
What is the difference btween ondemand and ondemandX?
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Added ondemandx governor no much difference

since we know that squads kernels have instead smartassv2 lilgv2, would be really nice to know how is it improved
Sent from my GT-S5670 using Tapatalk

v
djozaa said:
since we know that squads kernels have instead smartassv2 lilgv2, would be really nice to know how is it improved
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
these are the key upgrades in smartass v2 they are different from device to device
1. Smartass v2 have added a more aggressive screen off profile but if you have applied a screen off profile it will cause issue
2. Smartass v2 is more responsive than before
3. Smartass v2 have changed default frequency
4. Saves much power than before

how i configure CastagnaKernel OV for have max performance

how i configure CastagnaKernel OV for have max performance without trasform in cheese my cpu? what the governor? the i/o scheduler and the processor mhz?
Sorry for my bad english,but i am an ignorant

OV? Over-volt? do you mean OC? Overclock or UV? Undervolt
smartassV2/SIO (personal favourites)
245mhz/1800mhz (so default settings)
And I think you can better post this in the topic itself, and you will never turn your cpu into cheese, i once ran a benchmark at 2.016Ghz, and it just turned off

broodplank1337 said:
OV? Over-volt? do you mean OC? Overclock or UV? Undervolt
smartassV2/SIO (personal favourites)
245mhz/1800mhz (so default settings)
And I think you can better post this in the topic itself, and you will never turn your cpu into cheese, i once ran a benchmark at 2.016Ghz, and it just turned off
Click to expand...
Click to collapse
I remembered the cranium kernel at 2016 mhz..it became really hot...
Ondemand( little bit tweaked) 368 1804 sio...that s perfect
Q.D.E.

It would be better if you post this on kernel's thread I think there is no need to made a new post about that and sorry but and I'm not trying to be disrespectful. however you can use smartassv2 245-1800mhz that's a good choice.
Sent from my GT-I9001 using xda premium

the combination of default: lulzactive + sio is very performant (CFS version)
or you can try the governor lagfree
if you want the best reactivity using the BFS kernel version,
but is less multitasking

[Q] Xperia X8 CPU Overclocking effect ?

hi, i just wanna now is the overclock are really working or take any effect ?
i will show you my CPU frequency on attachment
Thanks XDA !!​
if this problem solved, please remove this thread

Kevalvino said:
hi, i just wanna now is the overclock are really working or take any effect ?
i will show you my CPU frequency on attachment
Thanks XDA !!​
if this problem solved, please remove this thread
Click to expand...
Click to collapse
Max. Frequency value is wrong
work hard, play hard

Gogeta said:
Max. Frequency value is wrong
work hard, play hard
Click to expand...
Click to collapse
how much max freq ? i set 825mhz in cm setting and my phone reboot

Kevalvino said:
how much max freq ? i set 825mhz in cm setting and my phone reboot
Click to expand...
Click to collapse
Keep decreasing it until your phone becomes stable(no reboot)
work hard, play hard

Gogeta said:
Keep decreasing it until your phone becomes stable(no reboot)
work hard, play hard
Click to expand...
Click to collapse
oh yes, what is smartass and other governor ?

smartass is a governor, smartassv2 is recommended and together with deadline scheduler

Eren Jaeger said:
smartass is a governor, smartassv2 is recommended and together with deadline scheduler
Click to expand...
Click to collapse
how about smartassV2 with Si0 scheduler, i use it on JB and it's popping~

syahazu said:
how about smartassV2 with Si0 scheduler, i use it on JB and it's popping~
Click to expand...
Click to collapse
depends on what you need. smartassV2 is a balance of performance and battety life. sio is stable, if i read correctly. i use either ondemand or interactive governor with vr scheduler since i don't use my x8 much nowadays.

@cascabel , alright thanks mate, im gonna stay with my current settings
Sent from my E15i using xda premium

cascabel said:
depends on what you need. smartassV2 is a balance of performance and battety life. sio is stable, if i read correctly. i use either ondemand or interactive governor with vr scheduler since i don't use my x8 much nowadays.
Click to expand...
Click to collapse
where can i get smartass v2 libs ?

Kevalvino said:
where can i get smartass v2 libs ?
Click to expand...
Click to collapse
afaik it's included in the kernel, and no module for stock. hopefully i'm wrong amd someone can point it out.

There is smartass module but it has some bugs http://forum.xda-developers.com/showthread.php?t=1159899