I am using CM7.1 stable
I had tried to install it through clockworkgen recovery -> install .zip from sd card
However, I cannot boot my phone after showing the LG logo
Help
Had the same problem when installing swiftextreme kernel on CM7 7.1 stable. Try flashing older version (i.e. before 1.11.4 version). I tried it and it worked.
ppp0941 said:
I am using CM7.1 stable
I had tried to install it through clockworkgen recovery -> install .zip from sd card
However, I cannot boot my phone after showing the LG logo
Help
Click to expand...
Click to collapse
komedol said:
Had the same problem when installing swiftextreme kernel on CM7 7.1 stable. Try flashing older version (i.e. before 1.11.4 version). I tried it and it worked.
Click to expand...
Click to collapse
CM 7.1 stable, latest supported swiftextreme kernel 05112011, above that version is not supported, only for nightly CM after stable release..
It works thank you very much
Related
Hi all
I possess one o2x at present there 1035.21_20110218 on mckr12 Roma fr16 beta 4.
I noticed that when I flash a capable kernel oc / uv, my phone stuck on the log's logo...
Anybody has already met this problem?
Thanx
No but if you reflash the rom it will remove the new kernal and put the original one back on and you will keep all your apps etc aswell
I have this problem too, i flash the new Fr17 & Fr18 mcr can't boot. If i just flash the older Fr16 kernel, it booted...............
soo. no way to have a uc/uv kernel on my o2xs ? :'(
If you flash vork then it won't work cause it was meant for CM7
just reflash back the ROM in recovery
Back to Stock Rom.
Try to back to stock rom as said dusitmon123, then Wipe everything, and reinstalling custom rom will work...
dridri85 said:
Try to back to stock rom as said dusitmon123, then Wipe everything, and reinstalling custom rom will work...
Click to expand...
Click to collapse
unfortunately, i have try two times and it is same.
A friend of mine gave me his LG Optimus 2x phone to installed AOKP M5 based on ICS 4.0.4. Currently his phone is running on ANdroid 2.2.2. I rooted this phone with SuperOneclick program successfully. AFter this I installed ROM Manager but when I tried to flash it with clockwork recovery through ROM Manager, it failed and after boot, it went in infinite boot loop. I managed to break the boot loop by pressing power and lower volume button together. Now I am stuck and don't know to proceed further.
I have Samsung Galaxy Nexus and Moto Xoom and it was lot easier to install custom ROM.
I will appreciate your help with some instructions.
Hi. Try to do wipes; cache partition, factory; davlick (advanced) and reflash again the said ROM. What CWM version you have? I would suggest 5.0.2.8, I have no problems on it. I flashed several roms, CM7 and CM9.
Hope it helps.
If I understood you don't have cwm installed correctly.
Try this: http://forum.xda-developers.com/showthread.php?p=18939518
Nvflash never fails.
And I'm not sure aokp works good on our phone, due to hard hacks necessary to run ics with outdated kernel sources concerning CPU and GPU chipset.
In case you can try Owain's unofficial builds not so far from aokp.
Striatum_bdr said:
If I understood you don't have cwm installed correctly.
Try this: http://forum.xda-developers.com/showthread.php?p=18939518
Nvflash never fails.
And I'm not sure aokp works good on our phone, due to hard hacks necessary to run ics with outdated kernel sources concerning CPU and GPU chipset.
In case you can try Owain's unofficial builds not so far from aokp.
Click to expand...
Click to collapse
Thanks a lot. NVFlash resolved the issue.
Hi,
I am using the stock gingerbread rom from CSL running the utterchaos kernel by doomlord & Napster.
I tried changing rom's to CM7 found at http://forum.xda-developers.com/showthread.php?t=1333503
I did everything as described, wiped data/factory reset and then flashed the rom.
It said success but when I rebooted phone it shows
"booting UtterChaos Kernel by Doomlord & Napster" screen and nothing happens further. The screen goes dark and again the same boot screen shows.
I guess its going into bootloop.
How do I fix this?????
Thanks
U should root ur device...flash clockwork mod and then flash rom
Sent from my GT-S5570 using xda premium
How do you think I flashed the rom in the first place?
Device rooted, latest version of CWM.
innocuous76 said:
Hi,
I am using the stock gingerbread rom from CSL running the utterchaos kernel by doomlord & Napster.
I tried changing rom's to CM7 found at http://forum.xda-developers.com/showthread.php?t=1333503
I did everything as described, wiped data/factory reset and then flashed the rom.
It said success but when I rebooted phone it shows
"booting UtterChaos Kernel by Doomlord & Napster" screen and nothing happens further. The screen goes dark and again the same boot screen shows.
I guess its going into bootloop.
How do I fix this?????
Thanks
Click to expand...
Click to collapse
hi
use SUTL and flash stock rom then get the CWM and install the CM7 via CWM it should work
this CM7 is on .35 based kernel and utterchaos kernel is .32 , that is creating the problem .....
So, if you want to try this rom, first install TJ's RC3 rom than install this rom .....
if u dontt want to try this now (as u have bricked ur phone once ) ....
just install stock GB rom via SUT ....
innocuous76 said:
Hi,
I am using the stock gingerbread rom from CSL running the utterchaos kernel by doomlord & Napster.
I tried changing rom's to CM7 found at http://forum.xda-developers.com/showthread.php?t=1333503
I did everything as described, wiped data/factory reset and then flashed the rom.
It said success but when I rebooted phone it shows
"booting UtterChaos Kernel by Doomlord & Napster" screen and nothing happens further. The screen goes dark and again the same boot screen shows.
I guess its going into bootloop.
How do I fix this?????
Thanks
Click to expand...
Click to collapse
dude since edowar's latest cm7 is Based on a new kernel 2.6.35.7, u have to flash stock sharp rom through SUT. then use tj's cwm recovery for latest kernal and flash cm7 27-3-2012
else you can flash UPDATE ROM 31-12 directly it is also good rom
So basically I have to flash 2 roms!
Can't I just flash a .35 kernel instead of the .32 one and then flash the CM7 rom?
innocuous76 said:
So basically I have to flash 2 roms!
Can't I just flash a .35 kernel instead of the .32 one and then flash the CM7 rom?
Click to expand...
Click to collapse
No u cant. But if you're from stock GB you could flash older CM7 based on the. 32 kernel instead
Sent from my CSL-MI410 using XDA
I tried to install apocalypse rom on a fresh flash of the the newest french S5830XWKTQ firmware, and i cant boot into system, I'm stuck on the android splash screen.
PS. Only the CM7.2 stable version runs.
Up
radoshka said:
I tried to install apocalypse rom on a fresh flash of the the newest french S5830XWKTQ firmware, and i cant boot into system, I'm stuck on the android splash screen.
PS. Only the CM7.2 stable version runs.
Click to expand...
Click to collapse
can you tell step by step what you did after flashing the stock rom...maybe you forgot something...
Got into the stock recovery and rooted the phone
restarted to recovery
installed CWM
restarted to recowery
and the when i try to install the latest CM7 Nightly or Apocalypse I get stuck on boot, only CM7 stable works fine.
radoshka said:
Got into the stock recovery and rooted the phone
restarted to recovery
installed CWM
restarted to recowery
and the when i try to install the latest CM7 Nightly or Apocalypse I get stuck on boot, only CM7 stable works fine.
Click to expand...
Click to collapse
Do the step 1 by 1..
Check you have latest version of superuser and CWM..and follow the insructions of installing rom from the thread..
Sent From ReVOlUTiON series ROM Device GT-S5830
Remember the wipes. Wipe data and cache before and after the flash.
Hello, I was on the latest stable,
I tried installing the latest nightly - 19 using the cm updater. It said something about data has another partion please try to install again to confirm wiping /data
so i selected the zip again, it seem to install just fine but I cant get past the cyanogenmod logo.
I wiped both cache and installed it again but same problem. Any tips what to do next?
I think you mean Nightly of CM 10.2 ...
Use the newest nightly ,in one Nightly there was an error about installation.
The warning is because with the nightly beginning from 20130816 the partitioning layout have to be changed because of Out of space on /system...so the massage is only that you know it and you have to confirm it a second time ...
So test a newer nightly an it should work!!!
Here is the link to the thread of CM 10.2 ....http://forum.xda-developers.com/showthread.php?t=2385178 there are some additional infos ...
Let me no if it works ...
unrealbe said:
Hello, I was on the latest stable,
I tried installing the latest nightly - 19 using the cm updater. It said something about data has another partion please try to install again to confirm wiping /data
so i selected the zip again, it seem to install just fine but I cant get past the cyanogenmod logo.
I wiped both cache and installed it again but same problem. Any tips what to do next?
Click to expand...
Click to collapse