Database Develop

[Q] Phone not booting.

Hey guys.
I've been using CM10 M2 for a while now and I decided I should reflash it.
So I made a wipe ( cleared all cache and everything ), installed cm10 m2 and Tantrum's Aroma Gapps installer to install my gapps and other stuff, and rebooted.
Problem is, once I reboot my phone will not boot and it is stuck on a black screen with LED's flashing.
Tried a few times and it the problem persists.
Any word of advice for me?
-Anton
EDIT: Tried flashing latest nightly with tantrums gapps, same problem.
EDIT V2: Flashed same nightly WITHOUT Tantrums gapps ( regular gapps ), everything boots normally. Problem was with Tantrums gapps.

Antonnzr said:
Hey guys.
I've been using CM10 M2 for a while now and I decided I should reflash it.
So I made a wipe ( cleared all cache and everything ), installed cm10 m2 and Tantrum's Aroma Gapps installer to install my gapps and other stuff, and rebooted.
Problem is, once I reboot my phone will not boot and it is stuck on a black screen with LED's flashing.
Tried a few times and it the problem persists.
Any word of advice for me?
-Anton
EDIT: Tried flashing latest nightly with tantrums gapps, same problem.
EDIT V2: Flashed same nightly WITHOUT Tantrums gapps ( regular gapps ), everything boots normally. Problem was with Tantrums gapps.
Click to expand...
Click to collapse
I'm not any pro user, but I think that the CM10 is too heavy for LGOB. I use the CM7.2 and works like a charm.

DFornazari said:
I'm not any pro user, but I think that the CM10 is too heavy for LGOB. I use the CM7.2 and works like a charm.
Click to expand...
Click to collapse
I have used nightly builds of CM10 from October 15 onwards with a problen
only on the 19th release when I couldn't install anything due to an issue with
the version of Clockworkmod Recovery. Once I found out how to downgrade
that version, it's all fine (touch wood).
Sam

@Antonnzr
Rather just use normal GAPPS. There was a release by tantrums that caused bootloop, but he fixed it now.
Use ADB to go back to recovery.
@DFornazari
CM10 isn't heavy at all. rmcc committed a lot of changes from TI's branch and I think it caused some instability with the some of the newer releases. I based that speculation from a comparison between nightlies before the changes was made and after the changes was made. I didn't look at the code so I can't be 100% certain since I don't know what they changed. rmmc is a great dev and should have all the device specif bugs sorted soon.

Yes its all working fine now with cm10 m2 and regualr gapps but I have a new issue.
Whenever I try to download an app from the Play Market ( nova launcher, for example ) it pops up with an error reading:
"Error: 'Nova launcher' could not be downloaded due to an error (927)"
or alternatively:
"Error: 'Nova launcher' could not be downloaded due to an error ( error retrieving information from the server )"
Tried to install apps via online Play Store both on my phone and my laptop but the download never starts. Help?
Disregard that, fixed after reflash.

[Q] bootloop emmc cm 11

I recently updated from emmc cm-11-20140215-NIGHTLY-ovation.zip to cm-11-20140222-NIGHTLY-ovation.zip . I am stuck in recovery bootloop after installing. going back cm-11-20140215 restores. anyone else have this issue ?

hemeboy said:
I recently updated from emmc cm-11-20140215-NIGHTLY-ovation.zip to cm-11-20140222-NIGHTLY-ovation.zip . I am stuck in recovery bootloop after installing. going back cm-11-20140215 restores. anyone else have this issue ?
Click to expand...
Click to collapse
Did you do a clean flash or did you install via CM Updater?
Try backing up your Apps with TitaniumBackup, wipe system, data, dalvik cache and cache in Recovery (CWM 3.0.6.4 for Kit Kat, I think) and flash Nightly + gapps.

JanSpatschek said:
Did you do a clean flash or did you install via CM Updater?
Try backing up your Apps with TitaniumBackup, wipe system, data, dalvik cache and cache in Recovery (CWM 3.0.6.4 for Kit Kat, I think) and flash Nightly + gapps.
Click to expand...
Click to collapse
Installed via CM Updater. I have used this for CM 10.2 and all versions of CM 11 up until current nightly without bootloop problem.

hemeboy said:
Installed via CM Updater. I have used this for CM 10.2 and all versions of CM 11 up until current nightly without bootloop problem.
Click to expand...
Click to collapse
Honestly, I am not using the Nightlies, so I can not report anything similar happening to me - it must be a problem with the latest build.
A bootloop usually means that the Kernel wasn´t flashed correctly. Just try directly in CWM and report if it worked out.
EDIT: Just found this thread that reports the same issue: http://forum.xda-developers.com/showthread.php?t=2658262

both 0222 and 0221 seem to bootloop. 0220 works however.

knyghtryda said:
both 0222 and 0221 seem to bootloop. 0220 works however.
Click to expand...
Click to collapse
Yes that has been my experience; I hope future builds are fixed

Seems to be fixed with nightly from 2-25

[Q] CM11 Rom wont flash

Hey there,
just tried to flash this ROM to my Ace.
I updated CWM to the required 6.0.5.3_1, wiped data/factory reset and formatted /system.
Everytime I try to install the .zip, I get the "installation aborted" message. No error code, no more information.
Would be awesome to get some help, cause i cant find this problem in the forum, only some with error codes.
I used an earlier version of CM on this device before trying to flash it now.
Greetings

Installed a non-modded version of CM now, which worked fine.
Getting the status 0 error now when installing the original CM gapps. Any solutions?

lolmachine said:
Installed a non-modded version of CM now, which worked fine.
Getting the status 0 error now when installing the original CM gapps. Any solutions?
Click to expand...
Click to collapse
1. Are you using a CM11 compatible recovery?
2. Are you the complete files downloaded? or have you an unstabe internet connection?
Try to donwload the files again

[Q] Official Cyamogenmod 12.1 Bootlop

Hey everyone, :laugh:
I found an Official update for my device from CyanogenMod Download Site.
I search any forum if available here about this ROM, unfortunately i cannot be able to find any form related to this ROM. Then i download 5.1 Gapps and download the ROM CyanogenMod 12.1. i wipe dalvik , userdata , cache and system. then flash both of the zip files ive downloaded. As i was using 12.0 Cyanogen i dont think i need to flash Cyanogen snapshot as it require for 12.0 to solve the BootLop. After flashing my phone is stuck on the booting animation since 20-25mins then i force reboot my phone into Recovery then i flash the SNAPSHOT and then reboot for once it works fine for me, then i just flash 12.1 and L gapps on the phone and then reboot, unforunately im facing the same problem from last hour. I dont know how to make 12.2 Cyan to work on my phone wihtout bootlop.
If anyone knows how to remove the bootlop then please let me know, thanks

Shehry_97 said:
Hey everyone, :laugh:
I found an Official update for my device from CyanogenMod Download Site.
I search any forum if available here about this ROM, unfortunately i cannot be able to find any form related to this ROM. Then i download 5.1 Gapps and download the ROM CyanogenMod 12.1. i wipe dalvik , userdata , cache and system. then flash both of the zip files ive downloaded. As i was using 12.0 Cyanogen i dont think i need to flash Cyanogen snapshot as it require for 12.0 to solve the BootLop. After flashing my phone is stuck on the booting animation since 20-25mins then i force reboot my phone into Recovery then i flash the SNAPSHOT and then reboot for once it works fine for me, then i just flash 12.1 and L gapps on the phone and then reboot, unforunately im facing the same problem from last hour. I dont know how to make 12.2 Cyan to work on my phone wihtout bootlop.
If anyone knows how to remove the bootlop then please let me know, thanks
Click to expand...
Click to collapse
Hmmm...I was on CM12 and wiped everything (cache, dalvik cache, system, data) so I clean flashed CM12.1 and GApps 5.1, after 2-3 mins it booted ok. So I guess flashing CM11 first is not needed. Just try again idk...:/

Please help me .. I wiped the system on my phone

Hello
today before I install CM 12.1 on my XT1072 I clicked on wipe in TWRP then advanced wipe then I selected
* Dalvik cache
* Data
* Cashe
* System
I tried to install CM 12.1 after that but it gave me Error
now I don't have any os installed on my phone
So please if any one know a full rom link or any way to install the os again please help me with it
thank you very much

Hassan Qandil said:
Hello
today before I install CM 12.1 on my XT1072 I clicked on wipe in TWRP then advanced wipe then I selected
* Dalvik cache
* Data
* Cashe
* System
I tried to install CM 12.1 after that but it gave me Error
now I don't have any os installed on my phone
So please if any one know a full rom link or any way to install the os again please help me with it
thank you very much
Click to expand...
Click to collapse
Download from Cyanogenmod site the last nightly of CM for THEA (http://download.cyanogenmod.org/?device=thea)
Put it in the micro SD card of your phone (using another phone or the card reader of your PC if it has one)
In TWRP install the ROM from the external SD (and Gapps if you want to use them)
In this situation I think that the above method is the only one, but wait for other answers, it could be that someone can show you better ways.

when I tried to install CM 12.1 the same way you said .. the phone gave me a failure message

Hassan Qandil said:
when I tried to install CM 12.1 the same way you said .. the phone gave me a failure message
Click to expand...
Click to collapse
Can you report that message?
The first time you install a ROM after a system wipe (as you described), TWRP gives an error message, but, after system reboot (by TWRP function), the phone starts normally and CM starts the standard update procedure

I am not sure what do you mean exactly but the installation of cm 12.1 didn't even start
gave me error message .. I think that cm rom need stock rom to install over it
now I just want to install the official firmware .. but I didn't found any rom img files yet
I thank every one can help me ... it's my only phone :crying:

Hassan Qandil said:
I am not sure what do you mean exactly but the installation of cm 12.1 didn't even start
gave me error message .. I think that cm rom need stock rom to install over it
now I just want to install the official firmware .. but I didn't found any rom img files yet
I thank every one can help me ... it's my only phone :crying:
Click to expand...
Click to collapse
Mmh, it's a strange situation. I wiped system memory about three/four time on my phone (and also on my friend's phone) and the procedure I described to you worked for me every time. But the error message, in my case, was after CM installation and not before, as in your case.
Did you check the MD5Sum (or SHA) of the downloaded file to make sure it was not corrupted? The error you received can be related to a corrupted file...
Lastly take a look at this tool:
http://forum.xda-developers.com/mot...dows-tool-moto-g-2015-xt1072-restore-t3124915
I've never tried it but it seems to be suited to your case.