Database Develop

[Q] Able to restore to stock, but...

My boot went corrupt with CM 7.0.2. I was able to restore to stock with no problem, but everytime I attempt to install CM 7 (stable or nightly), I get a black screen except for a little white/light blue line in the upper right corner.
I use the 3.0.0.5 Recovery with the directions in the following link.
http://forum.xda-developers.com/showthread.php?t=949699
Does anyone have an idea why this happens? I do remove the SD recovery card, and insert a blank SD card before rebooting.
Any help would be much appreciated!

Use 3.0.2.8 recovery

Thanks, I'll give that a shot right quick.

NewZJ said:
Use 3.0.2.8 recovery
Click to expand...
Click to collapse
Tried it and it boots back to the black screen with the line in the upper right corner.
Here's what I did.
Made the bootable sd card, copied over lastest build of cm7 and gapps.
Installed zips.
wiped data.
switch sd cards, rebooted
also tried it w/o wiping data.
Is there anything I'm doing wrong?

Wiping cache?

NewZJ said:
Wiping cache?
Click to expand...
Click to collapse
Should I do that before or after installing the zips?

wipe system, data, cache, then flash zips

NewZJ said:
wipe system, data, cache, then flash zips
Click to expand...
Click to collapse
Just tried that, no dice. It's still going back to the same screen.

Download the cm7 again, might be corrupt

NewZJ said:
Download the cm7 again, might be corrupt
Click to expand...
Click to collapse
Just downloaded a stable release, and it works. Is there any reason why the Nightly 80 wouldn't work, even after re-downloading it?

I'm also dealing with the same issue as well. The problem started when I tried to update from nightly 76 to 77. I also tried to flash to nightly 80, but no luck. I'm flashing a stable release now.
Edit: Flashing the stable release also worked for me. However, I wasn't able to flash the latest nightly over the stable build.

Yep.
Same problem here.
The stable works, boots fine, but the nightlies won't boot.
They go into the same flashing blue line.
I tried all the advice I could find, wipe system, cache, data and tried restoring to stock, still no dice.
I am using CWM 3.0.2.8.

I'm just a different flash method (verygreen's SD install), but found that nightlies beyond 75 won't boot without installing the .32 OC kernel. There's a discussion in both cyanogenmod experimental nook forum and in the dev forum here about it.

I guess I'll just wait until they resolve the issue then. I was really wanting to see how well the deep sleep worked.

Finally got the latest nightly from today with OC kernel and gapps. Running great so far. Just waiting on market being able to download.

[Q] Endless Boot & Gapps issue

Received this phone a month ago, just got around to rooting it yesterday. Root with motochopper went fine. Unlocked the handset with motopocalypse, everything went fine. Installed latest CM10.2 nightly and everything ran fine, even restarted phone and it worked fine. I then realized I forgot to install Gapps, So i went to CWM and installed the Gapps through "install zip from sd card". Now phone will not progress past the bootloader unlocked warning screen. I can restart and put phone into recovery or fastboot no problem but I don't know where to go from here. I tried a factory reset and reinstallation of CM but to no success. I am a bit of a newb when it comes to external programs like RSD Lite and haven't used it. Is there something obvious I'm missing in my progress of trying to fix my phone?

clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.

frog1982 said:
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
Click to expand...
Click to collapse
i can't post outside links yet but on the wiki.cyanogen site in the Gapps section I used the 10.2 20130813 1f51b5cc6370c1f45dc951109b6ce6ed release. I will attempt those steps once i can find a legitimate charger in my house. Phone doesn't accept power unless its on and i need just a bit of juice to boot it up

frog1982 said:
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
Click to expand...
Click to collapse
Here's the official name. Installed cm-10.2-2-130814-NIGHTLY-mb886.zip for the cm and gapps-jb-20130813-signed.zip for the GApps, both latest versions I believe

frog1982 said:
clear cache and dalvik cache under advanced then restart.
if you still loop do the above steps plus data reinstall cm10.2.
if you still loop do all above steps but also format system under mounts be re-install.
if you loop after all that then try a different ROM.
PS what version of gapps did you use.
Click to expand...
Click to collapse
none of the above steps worked unfortunately. Is there a set order of certain things to be mounted and unmounted in the mount section? Such as the system or sd card?

yodelyfish said:
none of the above steps worked unfortunately. Is there a set order of certain things to be mounted and unmounted in the mount section? Such as the system or sd card?
Click to expand...
Click to collapse
try changing the mount status of the cache
also are you getting any funny messages in cwm
PS are you flashing gapps before first boot up

frog1982 said:
try changing the mount status of the cache
also are you getting any funny messages in cwm
PS are you flashing gapps before first boot up
Click to expand...
Click to collapse
i got Cyanogen up and working. And no I was not flashing gaps Before first boot. i will try doing that before everything else

I got both GApps and cyanogenmod to install properly and the phone boots normally, but now I don't see any of the GApps actually present on the phone. Did I F somethin over again?

yodelyfish said:
I got both GApps and cyanogenmod to install properly and the phone boots normally, but now I don't see any of the GApps actually present on the phone. Did I F somethin over again?
Click to expand...
Click to collapse
did you flash gapps before flashing the ROM because the ROM flash will overwrite the gapps.
PS I suggest using zgapps http://forum.xda-developers.com/showthread.php?t=2240652 because they are stripped down which tends to prevent a lot of issues and if you want a 4.3 ROM try skeevydudes PAC ROM it is more stable plus has more features.

frog1982 said:
did you flash gapps before flashing the ROM because the ROM flash will overwrite the gapps.
PS I suggest using zgapps http://forum.xda-developers.com/showthread.php?t=2240652 because they are stripped down which tends to prevent a lot of issues and if you want a 4.3 ROM try skeevydudes PAC ROM it is more stable plus has more features.[/Q]
Awesome. Pac-Rom already looks better on review. I get to the dl page tho and have a monster list of choices. Which one do I go for?
Click to expand...
Click to collapse

frog1982 said:
did you flash gapps before flashing the ROM because the ROM flash will overwrite the gapps.
PS I suggest using zgapps http://forum.xda-developers.com/showthread.php?t=2240652 because they are stripped down which tends to prevent a lot of issues and if you want a 4.3 ROM try skeevydudes PAC ROM it is more stable plus has more features.
Click to expand...
Click to collapse
Thank you for all the help. PACROM is up and running swimmingly, all of the features are there and it is definitely better than CM by itself. Thanks again

I9000 cyanogenmod nightly help

Hello, I was on the latest stable,
I tried installing the latest nightly - 19 using the cm updater. It said something about data has another partion please try to install again to confirm wiping /data
so i selected the zip again, it seem to install just fine but I cant get past the cyanogenmod logo.
I wiped both cache and installed it again but same problem. Any tips what to do next?

I think you mean Nightly of CM 10.2 ...
Use the newest nightly ,in one Nightly there was an error about installation.
The warning is because with the nightly beginning from 20130816 the partitioning layout have to be changed because of Out of space on /system...so the massage is only that you know it and you have to confirm it a second time ...
So test a newer nightly an it should work!!!
Here is the link to the thread of CM 10.2 ....http://forum.xda-developers.com/showthread.php?t=2385178 there are some additional infos ...
Let me no if it works ...
unrealbe said:
Hello, I was on the latest stable,
I tried installing the latest nightly - 19 using the cm updater. It said something about data has another partion please try to install again to confirm wiping /data
so i selected the zip again, it seem to install just fine but I cant get past the cyanogenmod logo.
I wiped both cache and installed it again but same problem. Any tips what to do next?
Click to expand...
Click to collapse

Update to latest Milaq's Nigthly build

Hi,
I have the Touchpad installed with Milaq's nightly build 08/25 and the jb-app 2013/03 build.
Is there a way to update to latest Milaq's nightly build and latest jb-app 2013/08/12 without resetting the configuration in Touchpad and will have to re-install all the apps and their config/settings?
I was thinking to install the update via CWM-Clockmod, but afraid that I will have to re-install and reconfig all the apps.
Thanks,

Well, if nothing else, an app like MyBackup Root will be able to save all of your apks+their data. Plenty of other apps do it too, that is just the one I've used. Good luck.

You can try a dirty flash, meaning that you only wipe cache and dalvik (not system or data) when you flash it in recovery. Make sure to do a nandroid first.

There shouldn't be any issues when flashing the new nightly from the recovery (CWM or TWRP). Just remember to wipe cache and Dalvik cache before rebooting to CM.

I did an dirty update to the newest cm10.2 nightly coming from cm10.1 - no bad issues so far.
Be sure to make a backup of your old rom and simply try

[Q] Official Cyamogenmod 12.1 Bootlop

Hey everyone, :laugh:
I found an Official update for my device from CyanogenMod Download Site.
I search any forum if available here about this ROM, unfortunately i cannot be able to find any form related to this ROM. Then i download 5.1 Gapps and download the ROM CyanogenMod 12.1. i wipe dalvik , userdata , cache and system. then flash both of the zip files ive downloaded. As i was using 12.0 Cyanogen i dont think i need to flash Cyanogen snapshot as it require for 12.0 to solve the BootLop. After flashing my phone is stuck on the booting animation since 20-25mins then i force reboot my phone into Recovery then i flash the SNAPSHOT and then reboot for once it works fine for me, then i just flash 12.1 and L gapps on the phone and then reboot, unforunately im facing the same problem from last hour. I dont know how to make 12.2 Cyan to work on my phone wihtout bootlop.
If anyone knows how to remove the bootlop then please let me know, thanks

Shehry_97 said:
Hey everyone, :laugh:
I found an Official update for my device from CyanogenMod Download Site.
I search any forum if available here about this ROM, unfortunately i cannot be able to find any form related to this ROM. Then i download 5.1 Gapps and download the ROM CyanogenMod 12.1. i wipe dalvik , userdata , cache and system. then flash both of the zip files ive downloaded. As i was using 12.0 Cyanogen i dont think i need to flash Cyanogen snapshot as it require for 12.0 to solve the BootLop. After flashing my phone is stuck on the booting animation since 20-25mins then i force reboot my phone into Recovery then i flash the SNAPSHOT and then reboot for once it works fine for me, then i just flash 12.1 and L gapps on the phone and then reboot, unforunately im facing the same problem from last hour. I dont know how to make 12.2 Cyan to work on my phone wihtout bootlop.
If anyone knows how to remove the bootlop then please let me know, thanks
Click to expand...
Click to collapse
Hmmm...I was on CM12 and wiped everything (cache, dalvik cache, system, data) so I clean flashed CM12.1 and GApps 5.1, after 2-3 mins it booted ok. So I guess flashing CM11 first is not needed. Just try again idk...:/