Hello
today before I install CM 12.1 on my XT1072 I clicked on wipe in TWRP then advanced wipe then I selected
* Dalvik cache
* Data
* Cashe
* System
I tried to install CM 12.1 after that but it gave me Error
now I don't have any os installed on my phone
So please if any one know a full rom link or any way to install the os again please help me with it
thank you very much
Hassan Qandil said:
Hello
today before I install CM 12.1 on my XT1072 I clicked on wipe in TWRP then advanced wipe then I selected
* Dalvik cache
* Data
* Cashe
* System
I tried to install CM 12.1 after that but it gave me Error
now I don't have any os installed on my phone
So please if any one know a full rom link or any way to install the os again please help me with it
thank you very much
Click to expand...
Click to collapse
Download from Cyanogenmod site the last nightly of CM for THEA (http://download.cyanogenmod.org/?device=thea)
Put it in the micro SD card of your phone (using another phone or the card reader of your PC if it has one)
In TWRP install the ROM from the external SD (and Gapps if you want to use them)
In this situation I think that the above method is the only one, but wait for other answers, it could be that someone can show you better ways.
when I tried to install CM 12.1 the same way you said .. the phone gave me a failure message
Hassan Qandil said:
when I tried to install CM 12.1 the same way you said .. the phone gave me a failure message
Click to expand...
Click to collapse
Can you report that message?
The first time you install a ROM after a system wipe (as you described), TWRP gives an error message, but, after system reboot (by TWRP function), the phone starts normally and CM starts the standard update procedure
I am not sure what do you mean exactly but the installation of cm 12.1 didn't even start
gave me error message .. I think that cm rom need stock rom to install over it
now I just want to install the official firmware .. but I didn't found any rom img files yet
I thank every one can help me ... it's my only phone :crying:
Hassan Qandil said:
I am not sure what do you mean exactly but the installation of cm 12.1 didn't even start
gave me error message .. I think that cm rom need stock rom to install over it
now I just want to install the official firmware .. but I didn't found any rom img files yet
I thank every one can help me ... it's my only phone :crying:
Click to expand...
Click to collapse
Mmh, it's a strange situation. I wiped system memory about three/four time on my phone (and also on my friend's phone) and the procedure I described to you worked for me every time. But the error message, in my case, was after CM installation and not before, as in your case.
Did you check the MD5Sum (or SHA) of the downloaded file to make sure it was not corrupted? The error you received can be related to a corrupted file...
Lastly take a look at this tool:
http://forum.xda-developers.com/mot...dows-tool-moto-g-2015-xt1072-restore-t3124915
I've never tried it but it seems to be suited to your case.
Related
I had installed CM10 on my optimus 2x but I had a problem with the rom so I tried to flash another rom.
By mistake I wiped data, davlik-cache and everything else. So I don't have a backup. When I try to install another rom through TWRP is says that it failed and afterwards it says No OS installed, Are you sure you want to reboot?
Please I only want to return to the original stock rom and upgrade from that to ICS. I found the guide on how to update to ICS so all I'm asking for is how to get out of this No OS installed trouble.
I appreciate alll effort.
teddycypria said:
I had installed CM10 on my optimus 2x but I had a problem with the rom so I tried to flash another rom.
By mistake I wiped data, davlik-cache and everything else. So I don't have a backup. When I try to install another rom through TWRP is says that it failed and afterwards it says No OS installed, Are you sure you want to reboot?
Please I only want to return to the original stock rom and upgrade from that to ICS. I found the guide on how to update to ICS so all I'm asking for is how to get out of this No OS installed trouble.
I appreciate alll effort.
Click to expand...
Click to collapse
Hi Mate dont panic it´s easy to fix have u try any Nflash procedure yet ?
Try Stefans V28G via nflash:
http://forum.xda-developers.com/showthread.php?t=1986097
Direct link: http://d-h.st/PNj
Installation NVFlash version (under Windows): (internal SD will be wiped, /data partiton can be saved and restored with 2nd generation builds)
download the ROM, unpack it with WinRar, 7Zip or similar to any folder you want
take battery out of phone, press VOL + AND VOL - simulataneously, and while doing this plug the phone via USB to your PC
screen of phone remains black, this is normal, but you should hear a sound that you plugged the device. Probably you have to install APX drivers at this point if you are asked. They are included in the latest NVFlash builds. Tutorial on driver installation: http://www.modaco.com/topic/335416-n...-links-active/
assuming that you already installed APX drivers: run the "flash_windows.bat" file in the folder where you extracted the ROM
follow the instructions
That's already it Usually no complications to be feared. Enjoy!
Click to expand...
Click to collapse
You can connect phone to pc and copy a cm10, don't reboot phone, you must mount mass USB storage. Copy and flash: )
Inviato dal mio LG-P990 con Tapatalk 2
Will try it out
Thanks Domfis and Creison, I will try it out and see what happens. I hope it works :fingers-crossed: out cause I really do not wish to change my phone now that official ICS is out. If I manage to do this I will wait till summer to change my phone. Currently using my old nokia 3310
teddycypria said:
I had installed CM10 on my optimus 2x but I had a problem with the rom so I tried to flash another rom.
By mistake I wiped data, davlik-cache and everything else. So I don't have a backup. When I try to install another rom through TWRP is says that it failed and afterwards it says No OS installed, Are you sure you want to reboot?
Please I only want to return to the original stock rom and upgrade from that to ICS. I found the guide on how to update to ICS so all I'm asking for is how to get out of this No OS installed trouble.
I appreciate alll effort.
Click to expand...
Click to collapse
Please ask all questions in Q&A. Thread moved there.
teddycypria said:
Currently using my old nokia 3310
Click to expand...
Click to collapse
ROFL!!! :laugh:
assistance plz
also getting same message.but when flashing rom says no os want to continue. any help would be great. still have stock rom.
infamous215 said:
also getting same message.but when flashing rom says no os want to continue. any help would be great. still have stock rom.
Click to expand...
Click to collapse
i suppose you're on the old bootloader? then just use AIO Toolkit ->> http://forum.xda-developers.com/showthread.php?t=2020737
Use Option 4, then you'll get the new bootloader and CWM installed. Afterwards just flash a ICS Rom or CM10(ICS BL) via CWM!
error
I have had LG P9920 Rooted phone and its working smoothly( I rooted my phone using cyanogenmod 10.2 and super user cmd ) .yesterday I try to install new kikkat os for my rooted lg phone . and I am download new recovery .img and zip file ,then I mounted twrp recovery .img file in command line in phone (dd-if ….)after mount that .img I restarted my phone and boot up twrp the I wiped data, davlik-cache and everything else. So I don't get a backup. Then system and android data I wiped.it error shown “e: unable to mount sdcard .system and fail to factory reset “…
I cant see internal memory its show 0mb.so I tried to several time wiped data and everything, but finally “TWRP is says that it failed and afterwards it says No OS installed, Are you sure you want to reboot? “
Please anyone who can have same idea above this matter please help me, I appreciate all effort.
mahesh dimuthu said:
I have had LG P9920 Rooted phone and its working smoothly( I rooted my phone using cyanogenmod 10.2 and super user cmd ) .yesterday I try to install new kikkat os for my rooted lg phone . and I am download new recovery .img and zip file ,then I mounted twrp recovery .img file in command line in phone (dd-if ….)after mount that .img I restarted my phone and boot up twrp the I wiped data, davlik-cache and everything else. So I don't get a backup. Then system and android data I wiped.it error shown “e: unable to mount sdcard .system and fail to factory reset “…
I cant see internal memory its show 0mb.so I tried to several time wiped data and everything, but finally “TWRP is says that it failed and afterwards it says No OS installed, Are you sure you want to reboot? “
Please anyone who can have same idea above this matter please help me, I appreciate all effort.
Click to expand...
Click to collapse
Since data is lost anyway, try running AIO toolkit to reflash the bootloader which also fixes recovery and partitions.
Hello, I was on the latest stable,
I tried installing the latest nightly - 19 using the cm updater. It said something about data has another partion please try to install again to confirm wiping /data
so i selected the zip again, it seem to install just fine but I cant get past the cyanogenmod logo.
I wiped both cache and installed it again but same problem. Any tips what to do next?
I think you mean Nightly of CM 10.2 ...
Use the newest nightly ,in one Nightly there was an error about installation.
The warning is because with the nightly beginning from 20130816 the partitioning layout have to be changed because of Out of space on /system...so the massage is only that you know it and you have to confirm it a second time ...
So test a newer nightly an it should work!!!
Here is the link to the thread of CM 10.2 ....http://forum.xda-developers.com/showthread.php?t=2385178 there are some additional infos ...
Let me no if it works ...
unrealbe said:
Hello, I was on the latest stable,
I tried installing the latest nightly - 19 using the cm updater. It said something about data has another partion please try to install again to confirm wiping /data
so i selected the zip again, it seem to install just fine but I cant get past the cyanogenmod logo.
I wiped both cache and installed it again but same problem. Any tips what to do next?
Click to expand...
Click to collapse
Hey everyone, :laugh:
I found an Official update for my device from CyanogenMod Download Site.
I search any forum if available here about this ROM, unfortunately i cannot be able to find any form related to this ROM. Then i download 5.1 Gapps and download the ROM CyanogenMod 12.1. i wipe dalvik , userdata , cache and system. then flash both of the zip files ive downloaded. As i was using 12.0 Cyanogen i dont think i need to flash Cyanogen snapshot as it require for 12.0 to solve the BootLop. After flashing my phone is stuck on the booting animation since 20-25mins then i force reboot my phone into Recovery then i flash the SNAPSHOT and then reboot for once it works fine for me, then i just flash 12.1 and L gapps on the phone and then reboot, unforunately im facing the same problem from last hour. I dont know how to make 12.2 Cyan to work on my phone wihtout bootlop.
If anyone knows how to remove the bootlop then please let me know, thanks
Shehry_97 said:
Hey everyone, :laugh:
I found an Official update for my device from CyanogenMod Download Site.
I search any forum if available here about this ROM, unfortunately i cannot be able to find any form related to this ROM. Then i download 5.1 Gapps and download the ROM CyanogenMod 12.1. i wipe dalvik , userdata , cache and system. then flash both of the zip files ive downloaded. As i was using 12.0 Cyanogen i dont think i need to flash Cyanogen snapshot as it require for 12.0 to solve the BootLop. After flashing my phone is stuck on the booting animation since 20-25mins then i force reboot my phone into Recovery then i flash the SNAPSHOT and then reboot for once it works fine for me, then i just flash 12.1 and L gapps on the phone and then reboot, unforunately im facing the same problem from last hour. I dont know how to make 12.2 Cyan to work on my phone wihtout bootlop.
If anyone knows how to remove the bootlop then please let me know, thanks
Click to expand...
Click to collapse
Hmmm...I was on CM12 and wiped everything (cache, dalvik cache, system, data) so I clean flashed CM12.1 and GApps 5.1, after 2-3 mins it booted ok. So I guess flashing CM11 first is not needed. Just try again idk...:/
Hi there guys please help me out, i was trying to update a friend's s3 mini. I dowloaded cm 12.1 and some gapps he already had twrp 2.4.3.0, so i delete eerthing (factory reset) and delete cache and davlik cache, well , when i tried to install cm 12.1 says error flashing, i don't remember very well, but anyways now the cellphone is in a bootloop and i don't know what to do. i have some questions.
¿i have to update the trwp in order to install cm 12.1?
¿if i have to update the twrp how i do it if the cellphone is in a bootloop?
The cellphone start always in trwp so think is not dead. at least yet.
xrafael95x said:
¿i have to update the trwp in order to install cm 12.1?
Click to expand...
Click to collapse
yes you must update the twrp
download this http://get.novafusion.pl/?id=1374 and put it on an extSdCard
now booting into revocery and flash the update of the twrp after this click on reboot and select reboot recovery.now you should flash cm12.1
thank u i already solved all this problem, i'm gonna download cm 12.1 and install it with odin, but now i'm thinking in download the twrp in tar.md5 and install the cm 12.1 which i have it the cellphone becase i try to update and says error flashing, but anyways thanks
Hello guys! How are you?
I'm having some bugs with CyanogenMod 12.1 in my MotoG and haven't found nothing that could help me with my problem.
Well, here's the story:
My device had Android KitKat 4.4 as the stock rom and I updated it to Lollipop 5.0 before rooting.
Well, I unlocked the bootloader and used TWRP as a custom recovery and installed SuperSU.
I've been using the phone about almost 8 months after rooting and then, Motorola released an update, I tried to update it via OTA and, of course, it didn't worked since TWRP can't OTA. Nothing changed in my phone, I simply rebooted it and it worked but since a few days some apps started to suddenly close and/or stop.
I decided to install CyanogenMod 12.1, downloaded the latest nightly and a stock package of GApps and flashed them via TWRP.
Wiped Dalvik Cache, Data, Cache and System
At the first attempt, TWRP rebooted after flashing CM12.1 and I wiped the caches via WIPE menu before flashing GApps wich couldn't be installed because there was "no space in storage". Well, I booted my phone normally (running cm12) and downloaded a Micro GApps package and flashed it sucessfully.
Problem is: Clock stops working (it has stopped for now), I can't install some apps from PlayStore such as Facebook, etc and my phone appears to be unrooted.
I think my TWRP is bugged or something cause it does not works as tutorials, etc tells...It shows some errors and sometimes reboots itself after flashing some file.
Do you guys think I should reset everything and then redo all the steps to use CyanogenMod properly? I really liked this custom rom but I'm afraid there will be more bugs in the future....
Anyone?
my solution..
1. (JUST SAYING)You can install ota through fastboot. Use the ota file found in root.( There is a thread for this)
2. Try installing Lucas 2.8.7.0 build. Find it in his thread. Its posted there. It's somewhere in the sea of posts just find it.
3. Then try to clean flash cm 11 build. Then install cm 12.1 build.
4. See if it works.
I don't understand why you face this problem cause well TWRP is very stable.
Well see if it works and get back to me.
Edit :
Saved you some trouble here's the link for TWRP
Link : https://drive.google.com/file/d/0B0WGdtNWubBJVlctNE5PZ1oyQ00/view?pli=1
Its labelled as 2.8.7.0 but its actually 6.0 features of 7.0.
sagar846 said:
1. (JUST SAYING)You can install ota through fastboot. Use the ota file found in root.( There is a thread for this)
2. Try installing Lucas 2.8.7.0 build. Find it in his thread. Its posted there. It's somewhere in the sea of posts just find it.
3. Then try to clean flash cm 11 build. Then install cm 12.1 build.
4. See if it works.
I don't understand why you face this problem cause well TWRP is very stable.
Well see if it works and get back to me.
Edit :
Saved you some trouble here's the link for TWRP
Link : https://drive.google.com/file/d/0B0WGdtNWubBJVlctNE5PZ1oyQ00/view?pli=1
Its labelled as 2.8.7.0 but its actually 6.0 features of 7.0.
Click to expand...
Click to collapse
This is exactly what you should do.
There are several things that don't work as they supposed to do, so follow the steps @sagar846 mentioned.
Sent from somewhere
Oniganon said:
Anyone?
Click to expand...
Click to collapse
cm 12 and 12.1 have some little bugs still but it is useable for daily use