Related
I have a problem with configuring the mV on Voltage control. When ever I set it, which is usually (from top to bottom) 25;50;75;100;125;125 on noop. I got those from someone else but they work well so I kept them. Anyways when I try to set them they never stay that way. No matter if I reboot after saving boot settings or set them temporarily and close the app, when I go back into the app, they all go back to zero. Can anyone help me? I'm on firefly with an overclock kernal that I don't know the name of. My battery is bleeding fast, like 1 percent every two minutes which is ridiculous. could it possibly be a bad kernal?
Sent from my SAMSUNG-SGH-I897 using XDA App
After u save settings in the voltage control app:
1. Go to /system/etc/init.d
2. Make the folder rw, if it is in ro mode
3. Check for file that was created by voltage scheduler app
4. Rename that to S99_volt
5. Change the folder back to ro (optional)
Your voltage settings will now stick on reboot.
Its a dumb question but where is that? I cant find a system folder in my files
Sent from my SAMSUNG-SGH-I897 using XDA App
Wait, nevermind. All of a sudden it started working, even after reboot.
Sent from my SAMSUNG-SGH-I897 using XDA App
Dupontrocks11 said:
Its a dumb question but where is that? I cant find a system folder in my files
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Hmmm. You need to install a file manager that has root access, something like root explorer.
I already had root explorer and I did those steps just in case. But now my wifi doesn't work. I can connect to my neighbors wifi, just not mine. I tried resetting ether phone and the router but no luck? Thanks.
Sent from my SAMSUNG-SGH-I897 using XDA App
Dupontrocks11 said:
I already had root explorer and I did those steps just in case. But now my wifi doesn't work. I can connect to my neighbors wifi, just not mine. I tried resetting ether phone and the router but no luck? Thanks.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I am not sure what ROM u r using. I used to get this wifi error on initial 2.2 ROMs. Now I am not getting these errors with the later ROMs.
I was on firefly and I reflashed and it was better.
Sent from my GT-I9000 using XDA App
hi guys, so as the title states, i'm new to the droid scene and i have a streak 7. i have been reading for a few days now and want to root my streak. i am unsure about how to do this, i have seen gingerbreak and superoneclick. based on the fact that i dont know crap, which would you guys recommend? i have some other issues that concern me. maybe some of those fixed would be a good start?
issues:
1. i cant seem to connect my streak to my pc, running windows vista
2. i have no idea what all these acronyms mean?
3. i dont know what ROM to use, hell i dont know what a good ROM is
4. i cant connect my streak and my iphone via wifi
maybe some one can pint me to a basic, newb users guide would be good also. if some one is willing to help me, i'd appreciate it! sorry if this is the wrong spot
hello and welcome
1) did you install the dell drivers?
2) which acronyms are you referring to?
3) rom flavor depends on your needs... streakdroid is awesome but has bluetooth issues...on the flip side......is is overclockable. Im using custom 2.2 ...I need bluetooth sadly and can't sacrifice it for an overclockable kernel.
4)you need to modify the wpa supplicant file in order to tether via adhoc ( device to device )
Steps on how are in the forum.im typing via my ds7 ....otherwise id look it up for you. Its easy to find though.
Hope that helps!!!
pyraxiate said:
1) did you install the dell drivers?
2) which acronyms are you referring to?
3) rom flavor depends on your needs... streakdroid is awesome but has bluetooth issues...on the flip side......is is overclockable. Im using custom 2.2 ...I need bluetooth sadly and can't sacrifice it for an overclockable kernel.
4)you need to modify the wpa supplicant file in order to tether via adhoc ( device to device )
Steps on how are in the forum.im typing via my ds7 ....otherwise id look it up for you. Its easy to find though.
Hope that helps!!!
Click to expand...
Click to collapse
Thanks for your reply. Here is what I found:
1. The drivers I found won't work with vista but I was directed to another method I hope works
2. All the "apk, rom, wpa" stuff like that. I mean I figured out a rom is what you use as a front end of sorts
3. I don't need overclocking, don't need speed at all as it's just going in my truck as an audio source, gps, video player, Internet thing.
4. I'll use your post to search this method out. Might need some help. I'm assuming I need to have the devise rooted first?
On a rooting note, what's the best, easiest method for a newb such as myself? I am on 2.2.2 and it's a t-mobile streak 7.
Again thanks for your help.
With 2.2.2 use gingerbreak. Its one button and your rooted.
Sent from my Dell Streak 7 using XDA Premium App
csheppard93 said:
With 2.2.2 use gingerbreak. Its one button and your rooted.
Sent from my Dell Streak 7 using XDA Premium App
Click to expand...
Click to collapse
Does it require connecting to a pc? Or can I download gingerbreak and install it on an sd card? Better yet do you know of a link to a tutorial or thread? I'm on my phone now and won't be around a computer till late Sunday.
waxworkz said:
Does it require connecting to a pc? Or can I download gingerbreak and install it on an sd card? Better yet do you know of a link to a tutorial or thread? I'm on my phone now and won't be around a computer till late Sunday.
Click to expand...
Click to collapse
It does not require connecting to a PC. Here is the link to the tutorial; http://forum.xda-developers.com/showpost.php?p=13900137&postcount=1
rsfinsrq said:
It does not require connecting to a PC. Here is the link to the tutorial; http://forum.xda-developers.com/showpost.php?p=13900137&postcount=1
Click to expand...
Click to collapse
Thank you, I shall try that and hopefully not brick my streak.
As far as installing a ROM, any other ideas, advice, links? I like to read as much as possible to be well informed before I do anything.
If you like honeycomb android 3.2 you might wanna us honeystreak hd7 but it isn't the easiest to put on ur streak and u need a computer for this rom
Sent from my Droid using XDA Premium App
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
shadowdrag96 said:
If you like honeycomb android 3.2 you might wanna us honeystreak hd7 but it isn't the easiest to put on ur streak and u need a computer for this rom
Sent from my Droid using XDA Premium App
Click to expand...
Click to collapse
Thank you. Seems as I'll be home later tonight so I'll be able to try and at least root the streak tonight. I hope it goes well.
ok so i rooted my streak 7 tonight. wasnt so bad i used gingerbreak.
now i need to modify the supplicant file in order to tether my iphone to my streak via wifi. i found all the info and the files, but i dont know how to "flash the zip in recovery" i read through some 16 pages and still cant figure it out. can any one point me to a step by step on how to apply the patch? or just write it out step by step? i am getting the hang of this stuff but i dont know enough and dont want to mess up my streak and not be able to use it all via wifi.
thank you again guys, you are a big help to a newb
ok i think i figured out how to do it:
1: changed zip file name to update.zip
2. moved to sd card
3. opened up clockwork recovery
4. ran rom up date of said zip file
5. asked to make back up
6. rebooted in recovery mode
7. dont know if it worked??
8. still wont see my iphone using mywi for tethering
again any help would be great guys. thanks
wpa fix
waxworkz said:
ok i think i figured out how to do it:
1: changed zip file name to update.zip
2. moved to sd card
3. opened up clockwork recovery
4. ran rom up date of said zip file
5. asked to make back up
6. rebooted in recovery mode
7. dont know if it worked??
8. still wont see my iphone using mywi for tethering
again any help would be great guys. thanks
Click to expand...
Click to collapse
You don't need to do any of that....
http://forum.xda-developers.com/showthread.php?t=970219
You are rooted. All you have to do is use any file explorer which allows writing to root and copy this file to /system/ bin (back up your old one by renaming it to wpa_supplicant.old first. Restart wifi by going into settings and uncheck / recheck the box. You can now tether
The file is a zip. Extract the wpa_supplicant file from it and copy......not the whole zip itself...just the extracted file
pyraxiate said:
You don't need to do any of that....
http://forum.xda-developers.com/showthread.php?t=970219
You are rooted. All you have to do is use any file explorer which allows writing to root and copy this file to /system/ bin (back up your old one by renaming it to wpa_supplicant.old first. Restart wifi by going into settings and uncheck / recheck the box. You can now tether
The file is a zip. Extract the wpa_supplicant file from it and copy......not the whole zip itself...just the extracted file
Click to expand...
Click to collapse
Wow and I thought about copying the files. But I kept reading about "running" a patch, so I thought I had to let the script do something. Thank you very much for your link! I will try it hopefully tonight when I get home from working.
ok i am trying what you posted pyraxiate, but i cant seems to rename the files? i have tried both es file explorer and android file explorer.
ok i dont think my root went through. i re-read that the gingerbreak has to be on the devise and i had it on the sd card. problem is i cant get the gingerbreak apk to the eternal memory of the devise. my computer is only 32 bit and the adb files wont work on 32 bit, only 64 bit. so it seems i am stuck until i find a computer with an OS other than vista! damn it, unless some one has solution guess i am stuck unrooted for now
Do yourself a favor and use the super1click via tether to a laptop. Its easy. Install the drivers they give. Also I bought root explorer. Well worth it!
Also you can use the xp32 bit driver. It worked for me.
http://forum.xda-developers.com/showthread.php?t=939921
That's how I did mine
If you have the gingerbreak.apk on the SD card use a file manager and install it. Then open in in the app drawer and click root. The device will reboot if it worked. Might take a few minutes and look like it froze.
Sent from my Synergy Rom
Thing is I emailed it to myself and it still saved it to the sd card part, even though I removed my sd card?? I did the gingerbreak and it did reboot, I also did the clockwork recovery. I still don't know if it worked? Seems as though I try and rename the wpa files and I'm not allowed, does this mean that it isn't rooted?
waxworkz said:
Thing is I emailed it to myself and it still saved it to the sd card part, even though I removed my sd card?? I did the gingerbreak and it did reboot, I also did the clockwork recovery. I still don't know if it worked? Seems as though I try and rename the wpa files and I'm not allowed, does this mean that it isn't rooted?
Click to expand...
Click to collapse
I know es file explorer wont work for root. You need a root file explorer. Also, it would be a good idea to download a rom ( either streakdroid or custom 2.2.2), put it on the internal storage, and try booting into cwr to flash it. You boot cwr by powering the streak off first. Hold volume up in and push / hold power. You will get a recovery boot menu. From there choose update from zip ( this is where cwr is) and cwr should boot. From there follow guides to wipe data / cache / delvik and then go to install a file from zip. Choose the rom zip ...sit back...and relax as it flashes to a fully rooted rom
Hope that helps!!
Got GPS problem after the update with my LG o2x.
It cant seem to find any sats. Done everything thats been said on other threads nothing helps.
Any one with the same problem ?
Me 2. I get fix for about 2 sec. Then its stuck afterwards.
I don't even get a lock
Try clearing AGPS data with GPS Status
doesn't help. Can people please post their settings in hidden menu. All of them please
http://forum.xda-developers.com/showpost.php?p=19002334&postcount=41
some people said it work some said not work so try as your choice.
do you disable gps if you don't use it?
in official froyo and officeal gingerbread (v20l)
gps need to be enable on boot if you want good signal , otherwise you will always lose it
so try this
enable gps
reboot phone
turn on mobile data ( no wifi !)
open your gps app
I got my first fix in about 30 secs (cold start)
second on in 5 sec
Same problem as some of us had with previous leaked GB roms. Topogigi fixed the problem by tweaking service.jar file, that's the only thing I know. He talked about way of calling hardware that was wrong and explained that after a lock the GPS vanished..
You should search in Topogigi thread, there is a workaround in the beginning pages that could work (setting a new server in hidden menu).
That's why I'll stay with my ROM for now... It is perfectly working.
+1 from me, davjan. Seems to work for me. Thanks.
+1 here! Thanks for your trick davjan,works!
Sent from my LG-P990 using XDA App
+ Working for me !!!
file is allot bigger so whats the difference with stock v20L ?
thanks anyway !!
k101d said:
http://forum.xda-developers.com/showpost.php?p=19002334&postcount=41
some people said it work some said not work so try as your choice.
Click to expand...
Click to collapse
This works for me thanks a lot!
send from galaxy 3
davjan said:
do you disable gps if you don't use it?
in official froyo and officeal gingerbread (v20l)
gps need to be enable on boot if you want good signal , otherwise you will always lose it
so try this
enable gps
reboot phone
turn on mobile data ( no wifi !)
open your gps app
I got my first fix in about 30 secs (cold start)
second on in 5 sec
Click to expand...
Click to collapse
This worked for me!, however the srs level for each sat is not greater then 40 for some reason :S
I'm also experiencing this: as soon as the GPS gets a fix, the gps device itself seams to disappear. The Nav-app does get a valid location for one second and then the gps icon disappears.
This problem was not present in 10D and it does seem to happen when I activate the GPS later. If I boot with GPS enabled, the problem doesn't seem to occur.
Can this be fixed with the custom Jar file from Topogigi? Or is that for a different problem (no fix at all or something else - I do get a fix quickly but the GPS device seems to disappear then).
If so, how can I install it on my stock 20L? Some post talks about mounting a folder. How can I do that? I guess I need to root first and then use some kind of program on my pc or....?
I'm sorry if this has been covered before but I'm new to all this and there is so much information and a lot is hard to understand if you're new to this.
k101d said:
http://forum.xda-developers.com/showpost.php?p=19002334&postcount=41
some people said it work some said not work so try as your choice.
Click to expand...
Click to collapse
This got me into a bootloop...
Have you tried using the nokia servers, that cured my problem not getting a lock with froyo.
Sent from my LG-P990 using Tapatalk
Dkzs said:
This got me into a bootloop...
Click to expand...
Click to collapse
Let me gues..you deleted the services.jar and put the downloaded ZIP file in the framework folder without unpacking/renaming the file to services.jar ??
These are basic things to check but this could better be mentioned in the thread...
KillerbeeNL said:
Let me gues..you deleted the services.jar and put the downloaded ZIP file in the framework folder without unpacking/renaming the file to services.jar ??
These are basic things to check but this could better be mentioned in the thread...
Click to expand...
Click to collapse
Actually no. I copy/paste the unziped jar file using esfile explorer. Got a message files were merged. Then bootloop.
Tried with the help of thansen to recover the file via clockwokmod but that didnt work aswell. So I reflashed the v20l kdz and rerooted.
Sent from my LG-P990 using XDA App
Dkzs said:
Actually no. I copy/paste the unziped jar file using esfile explorer. Got a message files were merged. Then bootloop.
Tried with the help of thansen to recover the file via clockwokmod but that didnt work aswell. So I reflashed the v20l kdz and rerooted.
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
To bad, i did exacly the same only i used rootexplorer
Dkzs said:
Actually no. I copy/paste the unziped jar file using esfile explorer. Got a message files were merged. Then bootloop.
Tried with the help of thansen to recover the file via clockwokmod but that didnt work aswell. So I reflashed the v20l kdz and rerooted.
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
Just simplify set /system/framework folder into RW mode then delete the old one and then copy the file that extract from zip file into /system/framework then change file permission to 644 (rw-r--r--) --> reboot OR
Here the method from origin
1- Just mount your "/system/framework" folder writeable.
2- Then overwrite the existing "services.jar" with the attached one.
3- Reboot your phone and your gps will get its fix in only some seconds.
Dear all,
I am desperately looking for a STK.apk from the ICS SDK.
I am currently unable to install the sdk since I have no access to a computer right now.
Can someone please post a link to the latest stk.apk?
Sent from my I9000 using XDA App
Edit:
I have found another STK.apk than the one from post 3. The latter one has been extracted from OneCosmic's ICS Beta 1. It works fine for me as well. Apparently my Dual SIM adapter does not need all functions of STK, so it may not work for sending provider codes.
Anyone who is able to use the attached STK with provider codes, please provide feedback for others.
SiriusCybernetik said:
Dear all,
I am desperately looking for a STK.apk from the ICS SDK.
I am currently unable to install the sdk since I have no access to a computer right now.
Can someone please post a link to the latest stk.apk?
Sent from my I9000 using XDA App
Click to expand...
Click to collapse
mmeeetooo i need it plzzzzz
Success
To all it may concern:
I downloaded the STP.apk (SIM ToolKit) from the ICS Apps Dump , copied the apk to "system/app" and changed the permissions to Owner: RW, Group: R, Others: R
To do so, use any Root Explorer app.
As I am not yet allowed to paste links, please PM me if you want me to sent it to you.
Works like a charm now...
Steps:
1. Download 'stk.apk' and copy it somewhere on your phone
2. Move it to '/system/app' with a root enabled file manager
3. Change the permissions as described above
4. Reboot
F.y.i.: Root does not work on my ES File Explorer.
I use 'File Manager HD', cause it's easy to use and it is free.
Dont forget to enable root in the settings.
Permissions can be changed by long press on the file.
Doesn't work with 4.0.3 Is there newer apk available?
Toonio said:
Doesn't work with 4.0.3 Is there newer apk available?
Click to expand...
Click to collapse
Well I am on Onecosmics great RC1 with "updated" kernel, which is also 4.0.3 and it works perfect. It works even better than on GB.
I am using a dual SIM adapter which needs STK to switch between SIMs. On GB Stock, the process crashed from time to time and I had to restart the phone in order to be able to switch SIMs. Now, I doesn't crash anymore.
- Did you copy the file with a root-enabled explorer and assign the correct permissions?
- Do you have any radio related issues on your ICS installation? (e.g. incoming/outgoing calls working, no mobile data issues etc.)
I did all the things above, can't instal it....
Need other version of stk.apk?
Greetz
I don't think that you need another version, since this one is from the ICS System App Dump and it works perfect with 4.03
Do you receive any FCs on the Phone process? Can you copy stk.apk to system/app ? Did you check permissions (i.e. rw-r--r--)? Is the stk.apk still in the correct folder after reboot? Did you reboot?
A detailed description of what happens would be an asset if you want help.
I did everything as described here. Seems that app somehow works, but something isn't like it should be. My confirmation through stk doesnt reach back to server I guess.
STK depends on RIL!
Toonio said:
I did everything as described here. Seems that app somehow works, but something isn't like it should be. My confirmation through stk doesnt reach back to server I guess.
Click to expand...
Click to collapse
I'm not surprised... this is the same behavior I saw on CyanogenMod 7.
SIM Toolkit is heavily dependent on the Radio Interface Layer (RIL) implementation. As I understand it, the RIL is the hardware/software component which interacts with the phone's modem/baseband in order to call, SMS, 3G, etc. SIM Toolkit and USSD codes are all dependent on separate functions in the hardware, and the software layer must also implement hooks for them to work properly. The original poster's SIM switching gadget might work because the functions it relies on are implemented, while the ones we need are not.
Also, I've noticed that certain operations work on Onecosmic's ICS which don't work on Teamhacksung's, such as *522#, my bank's mobile interface. STK has only ever worked for me on Samsung stock ROMs.
More info about Android's RIL software and how it interacts with the hardware: http://www.netmite.com/android/mydroid/development/pdk/docs/telephony.html
Thanks aorth, for this detailed insight.
So I must consider myself as a 'lucky guy'.
Could the issue be fixed by using or porting a Nexus S modem?
Sent from my I9000 using XDA App
Damn, it won't wok properly then?!
Thx, and I'll keep hoping
I did everything in the steps. It's installed. I can't seem to find it in the app drawer. Nothing in my app drawer is hidden. So, since i can't find it. I can't run it.
Solutions?
Hi, with 'installed' , do you mean 'copied to \system\app' with correct permissions and still there after reboot ?
Sent from my I9000 using XDA App
not sure if this is the right place to ask but has anyone had an issue while on a call the only way yo talk to the person is either on bluetooth or speaker? btw using kernel that came with rc3plus
I can install it as a normal app or should I be root?
kasitodo said:
I can install it as a normal app or should I be root?
Click to expand...
Click to collapse
You must be root and you need a file manager with root access.
c.f. instructions on first page, post #3.
If you are not used to do this kind of stuff, be cautious and follow the instructions step by step. PM me, if you are unsure.
Do it at your own risk. I am not responsible for whatever could be the consequences of your doing.
I've just downloaded and followed the instructions for installation at post #3 and it worked fine! I'm using Onecosmic's ICS RC3.1 in my SGS.
Thanks...
SiriusCybernetik said:
To all it may concern:
I downloaded the STP.apk (SIM ToolKit) from the ICS Apps Dump , copied the apk to "system/app" and changed the permissions to Owner: RW, Group: R, Others: R
To do so, use any Root Explorer app.
As I am not yet allowed to paste links, please PM me if you want me to sent it to you.
Works like a charm now...
Steps:
1. Download 'stk.apk' and copy it somewhere on your phone
2. Move it to '/system/app' with a root enabled file manager
3. Change the permissions as described above
4. Reboot
F.y.i.: Root does not work on my ES File Explorer.
I use 'File Manager HD', cause it's easy to use and it is free.
Dont forget to enable root in the settings.
Permissions can be changed by long press on the file.
Click to expand...
Click to collapse
Well, i tryed everything and it doesnt work for me on "Onecosmic's ICS Port Android 4.0.3 RC3.1" :s
PS: I tryed with Root Explorer, Super Manager and even downloaded the app you said, but it doesnt have any option for Root lol, so i cant access those folders :s
NaabKing said:
Well, i tryed everything and it doesnt work for me on "Onecosmic's ICS Port Android 4.0.3 RC3.1" :s
PS: I tryed with Root Explorer, Super Manager and even downloaded the app you said, but it doesnt have any option for Root lol, so i cant access those folders :s
Click to expand...
Click to collapse
What exactly does not work? Do you have working root access?
If you are not able to copy the files to the specified location, then either your root is not working or you have not enabled it correctly.
In the app I mentioned, you must do the following:
- start 'file manager'
- press left button and select 'settings' from the context menu
- tick 'Root Explorer' and 'Mount system writeable' checkboxes
- allow the app root access whenever asked...
Sent from my GT-I9000 using XDA App
SiriusCybernetik said:
What exactly does not work? Do you have working root access?
If you are not able to copy the files to the specified location, then either your root is not working or you have not enabled it correctly.
In the app I mentioned, you must do the following:
- start 'file manager'
- press left button and select 'settings' from the context menu
- tick 'Root Explorer' and 'Mount system writeable' checkboxes
- allow the app root access whenever asked...
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Ofc. i have root access, but for me, it simply didnt work, the app doesnt show in the app list =/
Alright guys, Iv figured out another nice little mod to view both Samsung Apps & Google Playstore as a Note 3 on your mobile device, in my case my Galaxy S4.
You might be wondering why we would even want to do this ? At this stage Note 3's have access to exclusive APK's for example the app "Atooma" for the gear !
Your mobile device MUST be rooted. Also please keep a backup of your original build.prop.
Also I cant confirm this works on every device, although works perfectly fine on my Galaxy S4 i9505.
So lets dive straight into it.
1. Open/pull "/system/build.prop" from your rooted mobile device using a root file browser or adb.
2. Open file in a text editor.
3. Replace the default lines with the following:
Code:
ro.product.model=SM-N9005
ro.product.brand=samsung
ro.product.name=hltexx
ro.product.device=hlte
ro.product.board=MSM8974
ro.build.description=hltexx-user 4.3 JSS15J N9005XXUBMJ3 release-keys
ro.build.fingerprint=samsung/hltexx/hlte:4.3/JSS15J/N9005XXUBMJ3:user/release-keys
4. Save changes.
5. Set permissions to your modified build.prop if they do not match with other files in the /system directory.
6. Navigate to "Settings -> Application Manager -> All -> Google Playstore" and "Clear data", "Clear cache" & "Force Stop".
7. Restart device.
You will now have access to Note 3 exclusive apps, I recommend downloading the apps you want and reverting the changes you have made to the build.prop.
What I have done is kept a backup of my original build.prop in the system partition and I just swap them around when I need to by renaming & restarting, remembering to clear data & cache of the Playstore !
Remember to hit thanks !
Is this only for 4.3? Or will it work on 4.2.2?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
E3SYLER said:
Is this only for 4.3? Or will it work on 4.2.2?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
Unconfirmed, I would say only 4.3.. although you never know, just give it a try.
Worse case scenario if anything goes wrong just reflash your rom and it will revert all your changes.
What text editor did you use on your device? I'm trying to find one so I an try it out
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
E3SYLER said:
What text editor did you use on your device? I'm trying to find one so I an try it out
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
I use root explorer, which includes a text editor.
I would recommend pulling your build.prop to your PC tho, so you can simply copy & paste.
fOmey said:
I use root explorer, which includes a text editor.
I would recommend pulling your build.prop to your PC tho, so you can simply copy & paste.
Click to expand...
Click to collapse
just tried and when i try to replace the build with the modded one it wont keep the mod it reverts back to sgh-i337
im using 4.2.2 i think thats my problem.
thanks for the intel i will try it again when i get 4.3http://forum.xda-developers.com/images/smilies/laugh.gif
If this works with earlier versions (pre-4.3) then this would remedy the issue that I and so many others have been having
with the Gear Manager application where it won't sync with the watch because it detects that you are using an "unsupported device".
I might try this out sometime...