Need assistance! - Boot Loop. PLEASE! :( - LG Optimus 2x

I hope you can help me.
I rooted my device
(1) http://forum.xda-developers.com/showthread.php?t=1327599
and then
I decided to flash V20L (I created a NANDroid backup too)
(2) http://forum.xda-developers.com/showthread.php?t=1287236
and then
I decided to flash Cyanogenmod latest stable build.
(3) http://wiki.cyanogenmod.com/wiki/LG_Optimus_2X:_Full_Update_Guide#Flashing_CyanogenMod
I am trying to get the V20L back again, but i cant!!
I wiped all the data, and did recovery, but my phone is stuck in boot loop.
It loops the FIRST LG logo.
I cant flash V20L the way i did above anymore, I get errors.
Please tell me how I can get V20L backkkkk.

00:18:43 : [C:\LGMobileUpgrade] Try to delete folder
00:18:43 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
00:18:43 : Start Date : 2011-11-25 00:18:43
00:18:43 : ---------- QM Testmode ---------
00:18:43 : ***** Check Tool Version *****
00:18:43 : Tool version : 1.5.4.0
00:18:43 : UpgradeDLL version : 1.2.6.4
00:18:43 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
00:18:43 : LGE USB Driver Version :
00:18:43 : Android PDLV Version :
00:18:43 : Android NDLV Version :
00:18:43 : ******************************************
00:18:43 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
00:18:43 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
00:18:43 : SetEmerModeAT()
00:18:43 : _IsConnectedPhone Call
00:19:10 : _IsConnectedPhone(1)
00:19:10 : 0 - NotConnected.
00:19:10 : 1 - Normal connect success
00:19:10 : 2 - Emergency connect success
00:20:42 : _IsConnectedPhone Call for SmartPhone
00:20:54 : _IsConnectedPhone(0)
00:20:54 : 0 - NotConnected.
00:20:54 : 1 - Normal connect success
00:20:54 : 2 - Emergency connect success
00:20:54 : *****CheckOS Start********
00:20:54 : Microsoft_Windows7_Professional_Service Pack 1
00:20:54 : *****CheckPCSyncPrograms Start*****
00:20:54 : PCSyncPrograms Not Found - OK and ready to upgrade
00:20:54 : Checking the connection with the cell phone...
00:20:54 : dwWaitResetTime(40000 ms)
00:20:55 : _IsConnectedPhone Call
00:21:24 : _IsConnectedPhone(1)
00:21:24 : 0 - NotConnected.
00:21:24 : 1 - Normal connect success
00:21:24 : 2 - Emergency connect success00:23:08 : [011,700,147,062,092]Updating is not possible any longer due to a fatal error.\n\n[009,400,102,102,102]Disconnect from and connect the cable into your phone again and remove \nand install the battery and press the [009,700,102,102,102]'Restart'[009,400,102,102,102] button. This will resume the \nupgrade.\n\n\n\n\n\n\n\n\n\n\n\n\nPress the [009,700,102,102,102]Quit[009,400,102,102,102] button to stop the update. (_CheckPhoneType() Error)
00:23:08 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
00:23:08 : Page_Error ºÎºÐÀÔ´Ï´Ù
00:23:08 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
00:23:08 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
00:21:24 : Phone Mode(1)
00:21:24 : *****GetPhoneType Start*****

Stock based ROM's are EXT3 and CM7 is EXT4. So if you want to go back to a Stock based ROM after flashing CM7, you need wipe, then flash BackToEXT3 first and after that flash the ROM.

yes you need to flash back to ext3 cause CM based on ext4 /system /data that's why you have to flash back to ext3 in order to not get boot loop

You two are f***ing awesome.

Related

[SOLVED]Cant flash back to Stock Rom V20G

Please see logs below. Can anyone assist me in how to fix this damned error.
17:53:18 : [C:\LGMobileUpgrade] Try to delete folder
17:53:18 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
17:53:18 : Start Date : 2011-12-01 17:53:18
17:53:18 : ---------- QM Testmode ---------
17:53:18 : ***** Check Tool Version *****
17:53:18 : Tool version : 1.5.4.2
17:53:18 : UpgradeDLL version : 1.2.6.5
17:53:18 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
17:53:18 : LGE USB Driver Version :
17:53:18 : Android PDLV Version :
17:53:18 : Android NDLV Version :
17:53:18 : ******************************************
17:53:18 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
17:53:18 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
17:53:18 : SetEmerModeAT()
17:53:18 : _IsConnectedPhone Call
17:53:34 : _IsConnectedPhone(1)
17:53:34 : 0 - NotConnected.
17:53:34 : 1 - Normal connect success
17:53:34 : 2 - Emergency connect success
17:53:44 : _IsConnectedPhone Call for SmartPhone
17:53:46 : _IsConnectedPhone(0)
17:53:46 : 0 - NotConnected.
17:53:46 : 1 - Normal connect success
17:53:46 : 2 - Emergency connect success
17:53:46 : *****CheckOS Start********
17:53:46 : Microsoft_Windows7_Professional_Service Pack 1
17:53:46 : *****CheckPCSyncPrograms Start*****
17:53:47 : PCSyncPrograms Not Found - OK and ready to upgrade
17:53:47 : Checking the connection with the cell phone...
17:53:47 : dwWaitResetTime(40000 ms)
17:53:48 : _IsConnectedPhone Call
17:54:03 : _IsConnectedPhone(1)
17:54:03 : 0 - NotConnected.
17:54:03 : 1 - Normal connect success
17:54:03 : 2 - Emergency connect success
17:54:03 : Phone Mode(1)
17:54:03 : *****GetPhoneType Start*****
17:54:16 : [011,700,147,062,092]Updating is not possible any longer due to a fatal error.\n\n[009,400,102,102,102]Disconnect from and connect the cable into your phone again and remove \nand install the battery and press the [009,700,102,102,102]'Restart'[009,400,102,102,102] button. This will resume the \nupgrade.\n\n\n\n\n\n\n\n\n\n\n\n\nPress the [009,700,102,102,102]Quit[009,400,102,102,102] button to stop the update. (_CheckPhoneType() Error)
17:54:16 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
17:54:16 : Page_Error ºÎºÐÀÔ´Ï´Ù
17:54:16 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
17:54:16 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
I am really sorry people. I found out that I needed to start in recovery and wipe total system data.

[SOLVED] cant update to v20l due to some kind of error

guys pls help,,i cant update to v20l because of this error keeps showing up,halting the update process
11:49:41 : [C:\LGMobileUpgrade] Try to delete folder
11:49:41 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
11:49:41 : Start Date : 2011-12-06 11:49:41
11:49:41 : ---------- QM Testmode ---------
11:49:41 : ***** Check Tool Version *****
11:49:41 : Tool version : 1.5.4.4
11:49:41 : UpgradeDLL version : 1.2.6.5
11:49:41 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
11:49:41 : LGE USB Driver Version :
11:49:41 : Android PDLV Version :
11:49:41 : Android NDLV Version :
11:49:41 : ******************************************
11:49:41 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
11:49:41 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
11:49:41 : SetEmerModeAT()
11:49:41 : _IsConnectedPhone Call
11:49:54 : _IsConnectedPhone(1)
11:49:54 : 0 - NotConnected.
11:49:54 : 1 - Normal connect success
11:49:54 : 2 - Emergency connect success
11:50:02 : _IsConnectedPhone Call for SmartPhone
11:50:05 : _IsConnectedPhone(0)
11:50:05 : 0 - NotConnected.
11:50:05 : 1 - Normal connect success
11:50:05 : 2 - Emergency connect success
11:50:05 : *****CheckOS Start********
11:50:05 : Microsoft_Windows7_Professional_
11:50:05 : *****CheckPCSyncPrograms Start*****
11:50:06 : PCSyncPrograms Not Found - OK and ready to upgrade
11:50:06 : Checking the connection with the cell phone...
11:50:06 : dwWaitResetTime(40000 ms)
11:50:07 : _IsConnectedPhone Call
11:50:20 : _IsConnectedPhone(1)
11:50:20 : 0 - NotConnected.
11:50:20 : 1 - Normal connect success
11:50:20 : 2 - Emergency connect success
11:50:20 : Phone Mode(1)
11:50:20 : *****GetPhoneType Start*****
11:50:31 : [011,700,147,062,092]Updating is not possible any longer due to a fatal error.\n\n[009,400,102,102,102]Disconnect from and connect the cable into your phone again and remove \nand install the battery and press the [009,700,102,102,102]'Restart'[009,400,102,102,102] button. This will resume the \nupgrade.\n\n\n\n\n\n\n\n\n\n\n\n\nPress the [009,700,102,102,102]Quit[009,400,102,102,102] button to stop the update. (_CheckPhoneType() Error)
11:50:31 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
11:50:31 : Page_Error ºÎºÐÀÔ´Ï´Ù
11:50:31 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
11:50:31 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
qwyncy said:
guys pls help,,i cant update to v20l because of this error keeps showing up,halting the update process
11:49:41 : [C:\LGMobileUpgrade] Try to delete folder
11:49:41 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
11:49:41 : Start Date : 2011-12-06 11:49:41
11:49:41 : ---------- QM Testmode ---------
11:49:41 : ***** Check Tool Version *****
11:49:41 : Tool version : 1.5.4.4
11:49:41 : UpgradeDLL version : 1.2.6.5
11:49:41 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
11:49:41 : LGE USB Driver Version :
11:49:41 : Android PDLV Version :
11:49:41 : Android NDLV Version :
11:49:41 : ******************************************
11:49:41 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
11:49:41 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
11:49:41 : SetEmerModeAT()
11:49:41 : _IsConnectedPhone Call
11:49:54 : _IsConnectedPhone(1)
11:49:54 : 0 - NotConnected.
11:49:54 : 1 - Normal connect success
11:49:54 : 2 - Emergency connect success
11:50:02 : _IsConnectedPhone Call for SmartPhone
11:50:05 : _IsConnectedPhone(0)
11:50:05 : 0 - NotConnected.
11:50:05 : 1 - Normal connect success
11:50:05 : 2 - Emergency connect success
11:50:05 : *****CheckOS Start********
11:50:05 : Microsoft_Windows7_Professional_
11:50:05 : *****CheckPCSyncPrograms Start*****
11:50:06 : PCSyncPrograms Not Found - OK and ready to upgrade
11:50:06 : Checking the connection with the cell phone...
11:50:06 : dwWaitResetTime(40000 ms)
11:50:07 : _IsConnectedPhone Call
11:50:20 : _IsConnectedPhone(1)
11:50:20 : 0 - NotConnected.
11:50:20 : 1 - Normal connect success
11:50:20 : 2 - Emergency connect success
11:50:20 : Phone Mode(1)
11:50:20 : *****GetPhoneType Start*****
11:50:31 : [011,700,147,062,092]Updating is not possible any longer due to a fatal error.\n\n[009,400,102,102,102]Disconnect from and connect the cable into your phone again and remove \nand install the battery and press the [009,700,102,102,102]'Restart'[009,400,102,102,102] button. This will resume the \nupgrade.\n\n\n\n\n\n\n\n\n\n\n\n\nPress the [009,700,102,102,102]Quit[009,400,102,102,102] button to stop the update. (_CheckPhoneType() Error)
11:50:31 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
11:50:31 : Page_Error ºÎºÐÀÔ´Ï´Ù
11:50:31 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
11:50:31 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Click to expand...
Click to collapse
How did you solved it ? I'm trying to update my LG970 to V20N trough kdz and I'm getting the same error:
21:49:27 : *****GetPhoneType Start*****
21:49:36 : [011,700,147,062,092]Updating is not possible any longer due to a fatal error.\n\n[009,400,102,102,102]Disconnect from and connect the cable into your phone again and remove \nand install the battery and press the [009,700,102,102,102]'Restart'[009,400,102,102,102] button. This will resume the \nupgrade.\n\n\n\n\n\n\n\n\n\n\n\n\nPress the [009,700,102,102,102]Quit[009,400,102,102,102] button to stop the update. (_CheckPhoneType() Error)
21:49:36 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
21:49:36 : Page_Error ºÎºÐÀÔ´Ï´Ù
21:49:36 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
21:49:36 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
so how did you solved it?
Soooooo, how'd ya do it? I'm stuck as well.

problems flashing back to stock rom from CM7

After flashing CM7 nightly and moving back to stock I can flash stock rom only once
What i mean is when trying 2nd time to flash stock rom from stock rom with R&D tool kit it gets stuck and doesnt finish off
So i can flash to stock say 10c coming from CM7 nightly
butn when im on 10c if i want to flash to 10D or any other version it just doesnt complete process of flashing and stays at previous rom
Dont know what im missing maybe any help would be appreciated thanks
So as a mater of facts the problem is not after flashing back from CM 7 but from flashing from stock to stock changing the name of the thread it will get a better reply on your issue.
And as an answer to your question... hard to answer I suppose that you did all the steps with clear cache clear data etc.
A better description of the steps you do when you encounter the issue will bring you a better answer.
Regards,
Me
Have you tried factory resetting it?
Laier94 said:
Have you tried factory resetting it?
Click to expand...
Click to collapse
Cleared cache dalvick reset data done everything
It never used to do this will try and get copy of log when trying to flash 2nd time
Just aswell this is my 2nd phone
here is the message i get , weird iv flashed phoned several times before using r&d method with no probs before
12:06:37 : [C:\LGMobileUpgrade] Try to delete folder
12:06:37 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
12:06:37 : Start Date : 2011-12-21 12:06:37
12:06:37 : ---------- QM CSE Testmode ---------
12:06:37 : ---------- CSE mode ---------
12:06:37 : ***** Check Tool Version *****
12:06:37 : Tool version : 1.5.4.4
12:06:37 : UpgradeDLL version : 1.2.6.5
12:06:37 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
12:06:37 : LGE USB Driver Version : 4.9.7.0
12:06:37 : Android PDLV Version : 2.2
12:06:37 : Android NDLV Version :
12:06:37 : ******************************************
12:06:37 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
12:06:37 : SetEmerModeAT()
12:06:37 : *****CheckOS Start********
12:06:37 : Microsoft_Windows7_Professional_
12:06:37 : *****CheckPCSyncPrograms Start*****
12:06:38 : PCSyncPrograms Not Found - OK and ready to upgrade
12:06:38 : Checking the connection with the cell phone...
12:06:38 : dwWaitResetTime(40000 ms)
12:06:39 : _IsConnectedPhone Call
12:07:00 : _IsConnectedPhone(2)
12:07:00 : 0 - NotConnected.
12:07:00 : 1 - Normal connect success
12:07:00 : 2 - Emergency connect success
12:07:00 : Phone Mode(2)
12:07:01 : *****CheckPCSyncPrograms Start*****
12:07:02 : PCSyncPrograms Not Found - OK and ready to upgrade
12:07:03 : ****************CheckAndDownload********************
12:07:03 : ******Extract Start C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00.kdz*****
12:07:03 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
12:07:03 : File Size = 240079641
12:07:05 : Extract kdz file Success.
12:07:06 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10E.wdb\n
12:07:06 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V10E.wdb)
12:07:07 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LGP970.dll\n
12:07:07 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LGP970.dll)
12:07:07 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb)
12:07:07 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGP970.dll)
12:07:07 : Extract End C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00.cab
12:07:07 : ------------------Model.dll Information-------------------
12:07:07 : Filename : LGP970.dll
12:07:07 : Version : 1.0.0.2
12:07:07 : File size : 262144
12:07:07 : File date : 2011/04/05-23:43:32
12:07:07 : PC Created date: 2011/12/21-12:07:06
12:07:07 : ----------------------------------------------------------
12:07:07 : *****Check LGCM Programs Start*****
12:07:07 : LGCM Programs Not Found - OK and ready to upgrade
12:07:08 : *****WorkModelDLL Start*****
12:07:10 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb)
12:07:10 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
12:07:10 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGP970.dll)
12:07:10 : _DetachDLL Call
12:07:10 : _DetachDLL Call End
12:07:10 : Call fn_StartUpgrade
12:07:10 : Phone mode change -> CSE
12:07:10 : ********* CDMA Model.dll input Parameter *************
12:07:10 : MODEL_EVENT : 32769
12:07:10 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb
12:07:10 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
12:07:10 : BootWaitTime : 49500
12:07:10 : UsbHighSpeed : FALSE
12:07:10 : PhoneMode : 4
12:07:10 : NewPhoneBinVersion : EUROPE.OPEN.LGP970.V10E_00
12:07:10 : ClearSI : FALSE
12:07:10 : AuthMark : 0
12:07:10 : ********* CDMA Model.dll input Parameter End*************
12:07:15 : wParam : 2004, lParam = 7
12:07:15 : MODEL DLL Event : (2004, 7)
12:07:16 : Model Dll Msg Not Found(2004, 7)
12:07:16 : wParam : 2007, lParam = 0
12:07:16 : MODEL DLL Event : (2007, 0)
12:07:17 : Model Dll Msg Not Found(2007, 0)
12:07:17 : wParam : 2010, lParam = 3002
12:07:17 : MODEL DLL Event : (2010, 3002)
12:07:17 : Model Dll Msg Not Found(2010, 3002)
Maybe you can flash *.bin,this is full size rom.But when i flash from 10c to 10D ,i has done and could work.You'd better cheak your steps carefully.
JasonQMe said:
Maybe you can flash *.bin,this is full size rom.But when i flash from 10c to 10D ,i has done and could work.You'd better cheak your steps carefully.
Click to expand...
Click to collapse
Figured it out
now this is weird the software kdz files i had previously downloaded from another sited work , but recently iv been downloading from filesonic and none of their kdz files are working for my phone at all now downloaded and tried them all
anyway thanks people but they all work fine now
didnt realise i had origina downloads on other harddrive
this thread can be closed now
maniAK- said:
Figured it out
now this is weird the software kdz files i had previously downloaded from another sited work , but recently iv been downloading from filesonic and none of their kdz files are working for my phone at all now downloaded and tried them all
anyway thanks people but they all work fine now
didnt realise i had origina downloads on other harddrive
this thread can be closed now
Click to expand...
Click to collapse
So basically,the the kdz file you flashed with earlier wasn't working,so you downloaded a new kdz file,flashed it with the new one,and it worked? Simple as that?
Keep only "V10E_00.kdz" as firmware name.
Sent from my LG-P970
12:07:03 : ******Extract Start C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00 .kdz*****
Click to expand...
Click to collapse
rgabi is right
Been flashing Samsung Galaxy S1 and 2 for so long now little bit different from this phone , feel like such a noob now and thanks for pointing it out

[Q] Is this a hard brick? (TMO ver)

Got a G Flex that was rooted, messed with the display density and got stuck in a blank screen with glowing green LED after a visible LG logo....at that time USB Debugging was enabled, but carelessness led to a factory reset when i adb reboot into recovery. Erased. Rebooted. No Screen and NOW no USB Debugging with no way to enable it. I got the phone replaced and its just been sitting, but when my new device got its 4.4 update I snagged the KDZ and other files.
I've tried to use the Offline Fix v2 in the brick post, all 3 methods, but when the software starts to flash via the support tool i get this Log from the program (mind you this is with the phone "booting" into android with no screen and glowing led...that never shuts off)
23:20:58 : Restart.....
23:20:58 : Start Date : 2014-05-15 23:20:58
23:20:58 : ---------- QM Testmode ---------
23:20:58 : ***** Check Tool Version *****
23:20:58 : Tool version : 1.6.9.0
23:20:58 : UpgradeDLL version : 2.1.5.0
23:20:58 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
23:20:58 : LGE USB Driver Version :
23:20:58 : Android PDLV Version :
23:20:58 : Android NDLV Version :
23:20:58 : ******************************************
23:20:58 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
23:20:58 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
23:20:58 : SetEmerModeAT()
23:20:58 : _IsConnectedPhone Call
23:21:28 : _IsConnectedPhone(1)
23:21:28 : 0 - NotConnected.
23:21:28 : 1 - Normal connect success
23:21:28 : 2 - Emergency connect success
23:21:32 : *****CheckOS Start********
23:21:32 : Microsoft_Windows7_Home Edition_Service Pack 1
23:21:32 : *****CheckPCSyncPrograms Start*****
23:21:33 : PCSyncPrograms Not Found - OK and ready to upgrade
23:21:33 : Verifying phone connection...
23:21:33 : dwWaitResetTime(40000 ms)
23:21:34 : Phone Mode(1)
23:21:34 : *****GetPhoneType Start*****
23:21:38 : Phone Type : QCT
23:21:38 : *****GetPhoneModel Start*****
23:21:38 : Phone read Model : D95910c
23:21:38 : Server param Model :
23:21:38 : *****GetPhoneBinaryVersion Start*****
23:21:38 : Phone Bin Version :
23:21:38 : *****Get ESN / IMEI / MEID Start*****
23:21:39 : ESN/IMEI/MEID : 013925000409907
23:21:39 : _GetAuthMark : wAuthMark(65535)
23:21:39 : Wait 3Sec
23:21:42 : _SetAuthMark Fail
23:21:42 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
23:21:42 : Page_Error ºÎºÐÀÔ´Ï´Ù
23:21:42 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
23:21:42 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
In device manager I have LGE AndroidNet USB Serial Port (COM 11) & LGE AndroidNet USB Modem #2. A side note, when I flashed the working G Flex with its update via the LG Support Tool legit with no mods it flashed on COM 11 and that displayed on the screen as it updated. With this other device though, its a no go.
When I reboot the device to Download Mode and try and use the Offline Fix methods it errors out but not before i see what appears to be a message saying the BIN Version of the device is ATT-310-260 something of that nature ---which leads to me believe that in some point in all the flashing of sh*t ive done to try and revive this phone, something got crossed up in an LG Flashtool experiment and I've got conflicting information going on inside the device....
I've got an Pixel running Ubuntu, with Virtual Machines for XP, 7 and 8....I'd love to just tear it down and format all the partitions in a Linux term but Im not getting the bulk driver in any OS it still shows as all LG drivers, in Ubuntu its as an LG Electronics device under lsusb -- but does not register at all in ADB. Just blank.
I give. I thought the KK KDZ would be a fix all but I've hit a wall again. Sell it, keep it for parts, or is there a chance at a revival? Clearly, the LG force is not strong with me.
You can to recovery yours using my method. The different is mine is ATT and yours is T-Mobile.
http://forum.xda-developers.com/showthread.php?t=2753013
You will need to extract the DZ file from your T-Mobile KDZ file and use it as TOT + the attached DLL.
Good luck.
southsideweezy said:
Got a G Flex that was rooted, messed with the display density and got stuck in a blank screen with glowing green LED after a visible LG logo....at that time USB Debugging was enabled, but carelessness led to a factory reset when i adb reboot into recovery. Erased. Rebooted. No Screen and NOW no USB Debugging with no way to enable it. I got the phone replaced and its just been sitting, but when my new device got its 4.4 update I snagged the KDZ and other files.
I've tried to use the Offline Fix v2 in the brick post, all 3 methods, but when the software starts to flash via the support tool i get this Log from the program (mind you this is with the phone "booting" into android with no screen and glowing led...that never shuts off)
23:20:58 : Restart.....
23:20:58 : Start Date : 2014-05-15 23:20:58
23:20:58 : ---------- QM Testmode ---------
23:20:58 : ***** Check Tool Version *****
23:20:58 : Tool version : 1.6.9.0
23:20:58 : UpgradeDLL version : 2.1.5.0
23:20:58 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
23:20:58 : LGE USB Driver Version :
23:20:58 : Android PDLV Version :
23:20:58 : Android NDLV Version :
23:20:58 : ******************************************
23:20:58 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
23:20:58 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
23:20:58 : SetEmerModeAT()
23:20:58 : _IsConnectedPhone Call
23:21:28 : _IsConnectedPhone(1)
23:21:28 : 0 - NotConnected.
23:21:28 : 1 - Normal connect success
23:21:28 : 2 - Emergency connect success
23:21:32 : *****CheckOS Start********
23:21:32 : Microsoft_Windows7_Home Edition_Service Pack 1
23:21:32 : *****CheckPCSyncPrograms Start*****
23:21:33 : PCSyncPrograms Not Found - OK and ready to upgrade
23:21:33 : Verifying phone connection...
23:21:33 : dwWaitResetTime(40000 ms)
23:21:34 : Phone Mode(1)
23:21:34 : *****GetPhoneType Start*****
23:21:38 : Phone Type : QCT
23:21:38 : *****GetPhoneModel Start*****
23:21:38 : Phone read Model : D95910c
23:21:38 : Server param Model :
23:21:38 : *****GetPhoneBinaryVersion Start*****
23:21:38 : Phone Bin Version :
23:21:38 : *****Get ESN / IMEI / MEID Start*****
23:21:39 : ESN/IMEI/MEID : 013925000409907
23:21:39 : _GetAuthMark : wAuthMark(65535)
23:21:39 : Wait 3Sec
23:21:42 : _SetAuthMark Fail
23:21:42 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
23:21:42 : Page_Error ºÎºÐÀÔ´Ï´Ù
23:21:42 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
23:21:42 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
In device manager I have LGE AndroidNet USB Serial Port (COM 11) & LGE AndroidNet USB Modem #2. A side note, when I flashed the working G Flex with its update via the LG Support Tool legit with no mods it flashed on COM 11 and that displayed on the screen as it updated. With this other device though, its a no go.
When I reboot the device to Download Mode and try and use the Offline Fix methods it errors out but not before i see what appears to be a message saying the BIN Version of the device is ATT-310-260 something of that nature ---which leads to me believe that in some point in all the flashing of sh*t ive done to try and revive this phone, something got crossed up in an LG Flashtool experiment and I've got conflicting information going on inside the device....
I've got an Pixel running Ubuntu, with Virtual Machines for XP, 7 and 8....I'd love to just tear it down and format all the partitions in a Linux term but Im not getting the bulk driver in any OS it still shows as all LG drivers, in Ubuntu its as an LG Electronics device under lsusb -- but does not register at all in ADB. Just blank.
I give. I thought the KK KDZ would be a fix all but I've hit a wall again. Sell it, keep it for parts, or is there a chance at a revival? Clearly, the LG force is not strong with me.
Click to expand...
Click to collapse
vnbuddy2002 said:
You can to recovery yours using my method. The different is mine is ATT and yours is T-Mobile.
http://forum.xda-developers.com/showthread.php?t=2753013
You will need to extract the DZ file from your T-Mobile KDZ file and use it as TOT + the attached DLL.
Good luck.
Click to expand...
Click to collapse
Did as instructed, extracted the DZ from the KDZ, as well as the DLL, installed Flashtool & Megalock.dll, COM ports changed to 41, when I hit the yellow forward arrow I get a box that says "Waiting" then a follow up error box that says FailedPreviousLoad
southsideweezy said:
Did as instructed, extracted the DZ from the KDZ, as well as the DLL, installed Flashtool & Megalock.dll, COM ports changed to 41, when I hit the yellow forward arrow I get a box that says "Waiting" then a follow up error box that says FailedPreviousLoad
Click to expand...
Click to collapse
I just checked other threads also. It seems like a few others run into the same error as yours. Right now, what I can think of is to convert the DZ file to TOT, but I couldn't find the converter. Sorry, I couldn't help.
southsideweezy said:
I got the phone replaced and its just been sitting
Click to expand...
Click to collapse
I'm having a hard time following you. Are you saying you messed up your original phone and got it replaced, and then messed up the replacement too?... or does your replacement device still work?
Visa Declined said:
I'm having a hard time following you. Are you saying you messed up your original phone and got it replaced, and then messed up the replacement too?... or does your replacement device still work?
Click to expand...
Click to collapse
Yes I got the phone replaced, when 4.4 rolled out for the flex I updated and snatched the kdz. New one works fine, old one is still not working and still on 4.2, no attempt to flash software is working, neither 4.2 or 4.4
Thank you for your help!!

[Q] LG Flash Tool 2014 error in download mode

Coming from rooted (aboot, ...) D405n v10d I tried the Resurrection Remix rom. I flashed with CWM, forgot to wipe data and am stuck in a boot loop now. CWM is gone . The only thing that seems to work is the download mode (Hold Vol+ while plugging in), but it says "USER B100 - ROOTED" below the progress bar.
Using the LG Flash Tool 2014 and trying also the original LG Mobile Support Tool I tried to unbrick, but on 4 Different OS (Virtual: XP SP3, Win7 32bit, Win8.1 64bit from modern.ie, Native: Win8.1 64bit) in many tries I always end up with an error after 2% Progress of software upgrade.
I found the logfile created by the LGUserCSTool.exe and the last error is always "TYPE_WPARAM_UPGRADE_ERROR".
Please help, i'm stuck.
Code:
15:41:11 : Start Date : 2015-06-10 15:41:11
15:41:11 : -------- QM_Version mode ---------
15:41:11 : ***** Check Tool Version *****
15:41:11 : Tool version : 1.7.5.0
15:41:11 : UpgradeDLL version : 2.1.5.5
15:41:11 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
15:41:11 : LGE USB Driver Version :
15:41:11 : Android PDLV Version :
15:41:11 : Android NDLV Version : 3.14.0.0
15:41:11 : ******************************************
15:41:11 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
15:41:11 : SetEmerModeAT()
15:41:11 : _IsConnectedPhone Call
15:41:22 : _IsConnectedPhone(2)
15:41:22 : 0 - NotConnected.
15:41:22 : 1 - Normal connect success
15:41:22 : 2 - Emergency connect success
15:41:22 : *****CheckOS Start********
15:41:22 : Microsoft_Windows7_Professional_Service Pack 1
15:41:22 : *****CheckPCSyncPrograms Start*****
15:41:23 : PCSyncPrograms Not Found - OK and ready to upgrade
15:41:23 : Überprüfung der Telefonverbindung
15:41:23 : dwWaitResetTime(40000 ms)
15:41:24 : Phone Mode(2)
15:41:24 : *****GetPhoneType Start*****
15:41:24 : Phone Type : CDMA_2CHIP
15:41:24 : *****GetPhoneBinaryVersion Start*****
15:41:24 : Phone Bin Version : D40510D_00
15:41:24 : *****Get ESN / IMEI / MEID Start*****
15:41:24 : ESN/IMEI/MEID : 352763060106678
15:41:26 : Check Backup and Restore model
15:41:26 : Skip Backup and Restore - Emergency mode
15:41:26 : Phone type Compare start
15:41:26 : *****CheckPCSyncPrograms Start*****
15:41:26 : PCSyncPrograms Not Found - OK and ready to upgrade
15:41:27 : ****************CheckAndDownload********************
15:41:27 : Version : D40520A_00
15:41:27 : !!*****OpenURL Start*****!!
15:41:27 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
15:41:27 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
15:41:27 : ==================LJH log1 ====================
15:41:27 : !!*****OpenURL Start*****!!
15:41:28 : CreateFile : C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz
15:41:28 : =============HEADER : Range:bytes=0-=====================
15:41:28 : !!*****OpenURL Start*****!!
15:41:28 : *****DownLoad Start***** (Size:1170880830)
15:47:47 : Receive OK 1170880830/1170880830
15:47:47 : =============TAIL : 1170880830=====================
15:47:47 : Receive Size (1170880830/1170880830)
15:47:47 : *****CheckWebDownError Start*****
15:47:47 : File Error check OK
15:47:51 : ******Extract Start C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz*****
15:47:51 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
15:47:51 : Check 2G-4G big size kdz file..
15:47:52 : Extract 2G-4G big size kdz file..
15:47:52 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz)
15:47:52 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8x10_8x26.dll)
15:47:52 : Extract End C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz
15:47:52 : 01 Skip delete kdz 1.1 file...
15:47:52 : ------------------Model.dll Information-------------------
15:47:52 : Filename : LGUP_8x10_8x26.dll
15:47:52 : Version : 0.2.45.0
15:47:52 : File size : 1595904
15:47:52 : File date : 2015/06/10-15:47:52
15:47:52 : PC Created date: 2015/06/10-15:47:52
15:47:52 : ----------------------------------------------------------
15:47:52 : Skip delete kdz 1.1 or later version file...
15:47:55 : *****Check LGCM Programs Start*****
15:47:55 : LGCM Programs Not Found - OK and ready to upgrade
15:47:55 : m_pLGCyonUpdate status change.
15:47:55 : *****WorkModelDLL Start*****
15:47:56 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz)
15:47:56 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
15:47:56 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8x10_8x26.dll)
15:47:56 : _DetachDLL Call
15:48:01 : _DetachDLL Call End
15:48:01 : Call fn_StartUpgrade
15:48:01 : ********* 2Chip Model.dll input Parameter*************
15:48:01 : MODEL_EVENT : 32769
15:48:01 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz
15:48:01 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
15:48:01 : BootWaitTime : 49500
15:48:01 : UsbHighSpeed : FALSE
15:48:01 : PhoneMode : 2
15:48:01 : NewPhoneBinVersion : D40520A_00
15:48:01 : ClearSI : FALSE
15:48:01 : AuthMark : 0
15:48:01 : ********* 2Chip Model.dll input Parameter End*************
15:48:05 : wParam : 20, lParam = 540
15:48:05 : MODEL DLL Event : (20, 540)
15:48:07 : Model File Count = 540
15:48:07 : wParam : 100, lParam = 51
15:48:07 : MODEL DLL Event : (100, 51)
15:48:07 : Step : TYPE_WPARAM_UPGRADE_ERROR
15:48:07 : CleanModelDll() : Free Model.dll
15:48:07 : _DetachDLL Call
15:48:12 : _DetachDLL Call End
15:48:15 : Page_Error ºÎºÐÀÔ´Ï´Ù
15:48:15 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
Hi,
I have exactly the same problem. After a long investigate I understand the cause:
The phone is a LG L90 D405n but I loaded a D410 bootloader, so the LG Flashtool detects the device as a D410 phone so an error occurs when you try to install a D405n kdz.
In your example:
Code:
15:41:24 : *****GetPhoneBinaryVersion Start*****
[COLOR="Red"][B]15:41:24 : Phone Bin Version : D40510D_00[/B][/COLOR]
15:41:27 : ****************CheckAndDownload********************
[COLOR="SeaGreen"]15:41:27 : Version : D40520A_00[/COLOR]
15:47:55 : *****WorkModelDLL Start*****
[COLOR="SeaGreen"]15:47:56 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz)
15:47:56 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8x10_8x26.dll)[/COLOR]
15:48:01 : ********* 2Chip Model.dll input Parameter*************
[COLOR="SeaGreen"]15:48:01 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\D40520A_00.kdz[/COLOR]
I loaded a D410 kdz into my D405n phone, the load work using LG Flashtools but the phone turn in a bootloop.
Is there a way to force a kdz load into the phone? Or a way to edit the D405n kdz to let the LG flashtools believe that it's a D410 kdz one?
any solution?

Categories

Resources