[Q] Is this a hard brick? (TMO ver) - LG G Flex

Got a G Flex that was rooted, messed with the display density and got stuck in a blank screen with glowing green LED after a visible LG logo....at that time USB Debugging was enabled, but carelessness led to a factory reset when i adb reboot into recovery. Erased. Rebooted. No Screen and NOW no USB Debugging with no way to enable it. I got the phone replaced and its just been sitting, but when my new device got its 4.4 update I snagged the KDZ and other files.
I've tried to use the Offline Fix v2 in the brick post, all 3 methods, but when the software starts to flash via the support tool i get this Log from the program (mind you this is with the phone "booting" into android with no screen and glowing led...that never shuts off)
23:20:58 : Restart.....
23:20:58 : Start Date : 2014-05-15 23:20:58
23:20:58 : ---------- QM Testmode ---------
23:20:58 : ***** Check Tool Version *****
23:20:58 : Tool version : 1.6.9.0
23:20:58 : UpgradeDLL version : 2.1.5.0
23:20:58 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
23:20:58 : LGE USB Driver Version :
23:20:58 : Android PDLV Version :
23:20:58 : Android NDLV Version :
23:20:58 : ******************************************
23:20:58 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
23:20:58 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
23:20:58 : SetEmerModeAT()
23:20:58 : _IsConnectedPhone Call
23:21:28 : _IsConnectedPhone(1)
23:21:28 : 0 - NotConnected.
23:21:28 : 1 - Normal connect success
23:21:28 : 2 - Emergency connect success
23:21:32 : *****CheckOS Start********
23:21:32 : Microsoft_Windows7_Home Edition_Service Pack 1
23:21:32 : *****CheckPCSyncPrograms Start*****
23:21:33 : PCSyncPrograms Not Found - OK and ready to upgrade
23:21:33 : Verifying phone connection...
23:21:33 : dwWaitResetTime(40000 ms)
23:21:34 : Phone Mode(1)
23:21:34 : *****GetPhoneType Start*****
23:21:38 : Phone Type : QCT
23:21:38 : *****GetPhoneModel Start*****
23:21:38 : Phone read Model : D95910c
23:21:38 : Server param Model :
23:21:38 : *****GetPhoneBinaryVersion Start*****
23:21:38 : Phone Bin Version :
23:21:38 : *****Get ESN / IMEI / MEID Start*****
23:21:39 : ESN/IMEI/MEID : 013925000409907
23:21:39 : _GetAuthMark : wAuthMark(65535)
23:21:39 : Wait 3Sec
23:21:42 : _SetAuthMark Fail
23:21:42 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
23:21:42 : Page_Error ºÎºÐÀÔ´Ï´Ù
23:21:42 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
23:21:42 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
In device manager I have LGE AndroidNet USB Serial Port (COM 11) & LGE AndroidNet USB Modem #2. A side note, when I flashed the working G Flex with its update via the LG Support Tool legit with no mods it flashed on COM 11 and that displayed on the screen as it updated. With this other device though, its a no go.
When I reboot the device to Download Mode and try and use the Offline Fix methods it errors out but not before i see what appears to be a message saying the BIN Version of the device is ATT-310-260 something of that nature ---which leads to me believe that in some point in all the flashing of sh*t ive done to try and revive this phone, something got crossed up in an LG Flashtool experiment and I've got conflicting information going on inside the device....
I've got an Pixel running Ubuntu, with Virtual Machines for XP, 7 and 8....I'd love to just tear it down and format all the partitions in a Linux term but Im not getting the bulk driver in any OS it still shows as all LG drivers, in Ubuntu its as an LG Electronics device under lsusb -- but does not register at all in ADB. Just blank.
I give. I thought the KK KDZ would be a fix all but I've hit a wall again. Sell it, keep it for parts, or is there a chance at a revival? Clearly, the LG force is not strong with me.

You can to recovery yours using my method. The different is mine is ATT and yours is T-Mobile.
http://forum.xda-developers.com/showthread.php?t=2753013
You will need to extract the DZ file from your T-Mobile KDZ file and use it as TOT + the attached DLL.
Good luck.
southsideweezy said:
Got a G Flex that was rooted, messed with the display density and got stuck in a blank screen with glowing green LED after a visible LG logo....at that time USB Debugging was enabled, but carelessness led to a factory reset when i adb reboot into recovery. Erased. Rebooted. No Screen and NOW no USB Debugging with no way to enable it. I got the phone replaced and its just been sitting, but when my new device got its 4.4 update I snagged the KDZ and other files.
I've tried to use the Offline Fix v2 in the brick post, all 3 methods, but when the software starts to flash via the support tool i get this Log from the program (mind you this is with the phone "booting" into android with no screen and glowing led...that never shuts off)
23:20:58 : Restart.....
23:20:58 : Start Date : 2014-05-15 23:20:58
23:20:58 : ---------- QM Testmode ---------
23:20:58 : ***** Check Tool Version *****
23:20:58 : Tool version : 1.6.9.0
23:20:58 : UpgradeDLL version : 2.1.5.0
23:20:58 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
23:20:58 : LGE USB Driver Version :
23:20:58 : Android PDLV Version :
23:20:58 : Android NDLV Version :
23:20:58 : ******************************************
23:20:58 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
23:20:58 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
23:20:58 : SetEmerModeAT()
23:20:58 : _IsConnectedPhone Call
23:21:28 : _IsConnectedPhone(1)
23:21:28 : 0 - NotConnected.
23:21:28 : 1 - Normal connect success
23:21:28 : 2 - Emergency connect success
23:21:32 : *****CheckOS Start********
23:21:32 : Microsoft_Windows7_Home Edition_Service Pack 1
23:21:32 : *****CheckPCSyncPrograms Start*****
23:21:33 : PCSyncPrograms Not Found - OK and ready to upgrade
23:21:33 : Verifying phone connection...
23:21:33 : dwWaitResetTime(40000 ms)
23:21:34 : Phone Mode(1)
23:21:34 : *****GetPhoneType Start*****
23:21:38 : Phone Type : QCT
23:21:38 : *****GetPhoneModel Start*****
23:21:38 : Phone read Model : D95910c
23:21:38 : Server param Model :
23:21:38 : *****GetPhoneBinaryVersion Start*****
23:21:38 : Phone Bin Version :
23:21:38 : *****Get ESN / IMEI / MEID Start*****
23:21:39 : ESN/IMEI/MEID : 013925000409907
23:21:39 : _GetAuthMark : wAuthMark(65535)
23:21:39 : Wait 3Sec
23:21:42 : _SetAuthMark Fail
23:21:42 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
23:21:42 : Page_Error ºÎºÐÀÔ´Ï´Ù
23:21:42 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
23:21:42 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
In device manager I have LGE AndroidNet USB Serial Port (COM 11) & LGE AndroidNet USB Modem #2. A side note, when I flashed the working G Flex with its update via the LG Support Tool legit with no mods it flashed on COM 11 and that displayed on the screen as it updated. With this other device though, its a no go.
When I reboot the device to Download Mode and try and use the Offline Fix methods it errors out but not before i see what appears to be a message saying the BIN Version of the device is ATT-310-260 something of that nature ---which leads to me believe that in some point in all the flashing of sh*t ive done to try and revive this phone, something got crossed up in an LG Flashtool experiment and I've got conflicting information going on inside the device....
I've got an Pixel running Ubuntu, with Virtual Machines for XP, 7 and 8....I'd love to just tear it down and format all the partitions in a Linux term but Im not getting the bulk driver in any OS it still shows as all LG drivers, in Ubuntu its as an LG Electronics device under lsusb -- but does not register at all in ADB. Just blank.
I give. I thought the KK KDZ would be a fix all but I've hit a wall again. Sell it, keep it for parts, or is there a chance at a revival? Clearly, the LG force is not strong with me.
Click to expand...
Click to collapse

vnbuddy2002 said:
You can to recovery yours using my method. The different is mine is ATT and yours is T-Mobile.
http://forum.xda-developers.com/showthread.php?t=2753013
You will need to extract the DZ file from your T-Mobile KDZ file and use it as TOT + the attached DLL.
Good luck.
Click to expand...
Click to collapse
Did as instructed, extracted the DZ from the KDZ, as well as the DLL, installed Flashtool & Megalock.dll, COM ports changed to 41, when I hit the yellow forward arrow I get a box that says "Waiting" then a follow up error box that says FailedPreviousLoad

southsideweezy said:
Did as instructed, extracted the DZ from the KDZ, as well as the DLL, installed Flashtool & Megalock.dll, COM ports changed to 41, when I hit the yellow forward arrow I get a box that says "Waiting" then a follow up error box that says FailedPreviousLoad
Click to expand...
Click to collapse
I just checked other threads also. It seems like a few others run into the same error as yours. Right now, what I can think of is to convert the DZ file to TOT, but I couldn't find the converter. Sorry, I couldn't help.

southsideweezy said:
I got the phone replaced and its just been sitting
Click to expand...
Click to collapse
I'm having a hard time following you. Are you saying you messed up your original phone and got it replaced, and then messed up the replacement too?... or does your replacement device still work?

Visa Declined said:
I'm having a hard time following you. Are you saying you messed up your original phone and got it replaced, and then messed up the replacement too?... or does your replacement device still work?
Click to expand...
Click to collapse
Yes I got the phone replaced, when 4.4 rolled out for the flex I updated and snatched the kdz. New one works fine, old one is still not working and still on 4.2, no attempt to flash software is working, neither 4.2 or 4.4

Thank you for your help!!

Related

[Q] plz help my p970 ...Brick!

My phone was rooted by gingerbreak v1.2 and I used titanium back up to delete some apps. I have deleted some important system apps so I restart my p970.
It just gives me a Lg logo and not works. I followed the instructions and used the
B2CAppSetup to reover my phone. I use my 32bit computer and 64bit laptop to recover......but it's doesn't work!!
I think I should enter the recovery mode and download an offical rom ? right?
Can anyone tell me how to fix it?
The main problem is that I don't know what's the first step....I don't know how to enter the recovery mode!!
Thx a lot ...my friends
Use 32bit system. Will be much easier.
0 - download LG mobile support Tool. Install drivers before you connect phone.
1 - download KDZ Updater:
http://forum.xda-developers.com/attachment.php?attachmentid=420545&d=1287222698
2 - unzip KDZ into KDZ folder on desktop. Install MSXML.MSI.
3 - download ROM to folder KDZ on desktop:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP970/ANEUTL/V10b_00/V10B_00.kdz
4 - remove battery from phone
5 - push VolUp button and connect usb cable. You will see "S/W update" on the screen. Then you can free VolUp button. Wait until all the drivers install. Disable LG Modem in windows hardware manager (Start -> Search -> devmgmt.msc -> hit enter -> expand Modems -> rightclick on LG Modem -> disable)
4 - launch KDZ Updater as admin (rightclick -> Run as administrator)
5 - click folder icon on the right part of window -> point to downloaded .kdz firmware file -> Ok
6 - on the bottom of window you will see Read phone information. Click it.
7 - click start update. DO NOT CLICK ANYTHING ELSE.
8 - wait and pray
9 - when flashing is finished phone will restart
Sorry for my english
my phone is driving me crazy, cant downgrade
mgregor said:
Use 32bit system. Will be much easier.
0 - download LG mobile support Tool. Install drivers before you connect phone.
1 - download KDZ Updater:
http://forum.xda-developers.com/attachment.php?attachmentid=420545&d=1287222698
2 - unzip KDZ into KDZ folder on desktop. Install MSXML.MSI.
3 - download ROM to folder KDZ on desktop:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP970/ANEUTL/V10b_00/V10B_00.kdz
4 - remove battery from phone
5 - push VolUp button and connect usb cable. You will see "S/W update" on the screen. Then you can free VolUp button. Wait until all the drivers install. Disable LG Modem in windows hardware manager (Start -> Search -> devmgmt.msc -> hit enter -> expand Modems -> rightclick on LG Modem -> disable)
4 - launch KDZ Updater as admin (rightclick -> Run as administrator)
5 - click folder icon on the right part of window -> point to downloaded .kdz firmware file -> Ok
6 - on the bottom of window you will see Read phone information. Click it.
7 - click start update. DO NOT CLICK ANYTHING ELSE.
8 - wait and pray
9 - when flashing is finished phone will restart
Sorry for my english [/QUOTE
hi, i already flashed my phone once with all the procedures you mention but somehow i bricked it while changing the theme on the boot menu so i had to do an emergency flash on it and somehow now i cant seem to downgrade it again. it always fails and gives me this message.
14:42:59 : A verificar a ligação com o telefone móvel...
14:42:59 : dwWaitResetTime(40000 ms)
14:43:00 : Phone Mode(2)
14:43:00 : *****GetPhoneType Start*****
14:43:00 : Phone Type : OMAP_IFX
14:44:00 : *****GetPhoneBinaryVersion Start*****
14:44:00 : *****Get ESN / IMEI / MEID Start*****
14:44:00 : ESN/IMEI/MEID : 356772041604012
14:44:01 : Phone type Compare start
14:44:01 : *****CheckPCSyncPrograms Start*****
14:44:02 : PCSyncPrograms Not Found - OK and ready to upgrade
14:44:03 : ****************CheckAndDownload****************** **
14:44:03 : ******Extract Start C:\Users\sergio\Desktop\VDP_VODAFONE(PORTUGAL).LGP 970.V10A_00.kdz*****
14:44:03 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
14:44:03 : File Size = 239985437
14:44:10 : Extract kdz file Success.
14:44:14 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10A.wdb\n
14:44:14 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V10A.wdb )
14:44:14 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LGP970.dll\n
14:44:14 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LGP970.d ll)
14:44:14 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V10A.wdb)
14:44:14 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGP970.dl l)
14:44:14 : Extract End C:\Users\sergio\Desktop\VDP_VODAFONE(PORTUGAL).LGP 970.V10A_00.cab
14:44:15 : ------------------Model.dll Information-------------------
14:44:15 : Filename : LGP970.dll
14:44:15 : Version : 1.0.0.2
14:44:15 : File size : 262144
14:44:15 : File date : 2011/04/05-23:43:32
14:44:15 : PC Created date: 2011/09/16-14:44:14
14:44:15 : ----------------------------------------------------------
14:44:15 : *****Check LGCM Programs Start*****
14:44:15 : LGCM Programs Not Found - OK and ready to upgrade
14:44:16 : *****WorkModelDLL Start*****
14:44:19 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone \V10A.wdb)
14:44:19 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
14:44:19 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LG P970.dll)
14:44:19 : _DetachDLL Call
14:44:19 : _DetachDLL Call End
14:44:19 : Call fn_StartUpgrade
14:44:19 : Type = OMAP_IFX
14:44:19 : ********* 2Chip Model.dll input Parameter*************
14:44:19 : MODEL_EVENT : 32769
14:44:19 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V10A.wdb
14:44:19 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
14:44:19 : BootWaitTime : 49500
14:44:19 : UsbHighSpeed : FALSE
14:44:19 : PhoneMode : 2
14:44:19 : NewPhoneBinVersion : VDP_VODAFONE(PORTUGAL).LGP970.V10A_00
14:44:19 : ClearSI : FALSE
14:44:19 : AuthMark : 0
14:44:19 : ********* 2Chip Model.dll input Parameter End*************
14:44:24 : wParam : 2004, lParam = 7
14:44:25 : Step : TYPE_WPARAM_IFX_DN_POS
14:44:25 : wParam : 2007, lParam = 0
14:44:26 : Step : TYPE_WPARAM_READ_FILES
14:44:26 : wParam : 2010, lParam = 3002
14:44:26 : CleanModelDll() : Free Model.dll
14:44:26 : _DetachDLL Call
14:44:26 : _DetachDLL Call End
14:44:26 : Page_Error ºÎºÐÀÔ´Ï´Ù
14:44:26 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
thank you very much for your help so far and in the future too...
Click to expand...
Click to collapse
skylinegt77 said:
C:\Users\sergio\Desktop\VDP_VODAFONE(PORTUGAL).LGP 970.V10A_00.kdz*****
Click to expand...
Click to collapse
Rename those long file name to V10A_00.kdz
try to download rom with 10c european it did the trick for me and my LG is back alive .
Since my black aways had 10c since the beginning. So find the good ROM with match the version you originally had in your tel.
I can't post a link here so i have to find it your self
cheers !!!
You should try THIS.
I tried all above process ... still I am getting black screen on my screen nothing else .... can you please guide me ....
Thanks in advance
vamshikrushna said:
I tried all above process ... still I am getting black screen on my screen nothing else .... can you please guide me ....
Thanks in advance
Click to expand...
Click to collapse
Hello , I have the same problem. did u find any solution
My LG OPTIMUS Black is tuck at LG LOGO. actually it all came after i installed xionia recovery. After rebooting, it never goes forward, always stuck at LG LOGO. I tried LG mobile update recovery, Flashzip tools using APbin and CP Binfiles, also tred with KDZ files.. but all in vain. Can any body help me please. I am really nervous. thanks in advance

Need assistance! - Boot Loop. PLEASE! :(

I hope you can help me.
I rooted my device
(1) http://forum.xda-developers.com/showthread.php?t=1327599
and then
I decided to flash V20L (I created a NANDroid backup too)
(2) http://forum.xda-developers.com/showthread.php?t=1287236
and then
I decided to flash Cyanogenmod latest stable build.
(3) http://wiki.cyanogenmod.com/wiki/LG_Optimus_2X:_Full_Update_Guide#Flashing_CyanogenMod
I am trying to get the V20L back again, but i cant!!
I wiped all the data, and did recovery, but my phone is stuck in boot loop.
It loops the FIRST LG logo.
I cant flash V20L the way i did above anymore, I get errors.
Please tell me how I can get V20L backkkkk.
00:18:43 : [C:\LGMobileUpgrade] Try to delete folder
00:18:43 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
00:18:43 : Start Date : 2011-11-25 00:18:43
00:18:43 : ---------- QM Testmode ---------
00:18:43 : ***** Check Tool Version *****
00:18:43 : Tool version : 1.5.4.0
00:18:43 : UpgradeDLL version : 1.2.6.4
00:18:43 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
00:18:43 : LGE USB Driver Version :
00:18:43 : Android PDLV Version :
00:18:43 : Android NDLV Version :
00:18:43 : ******************************************
00:18:43 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
00:18:43 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
00:18:43 : SetEmerModeAT()
00:18:43 : _IsConnectedPhone Call
00:19:10 : _IsConnectedPhone(1)
00:19:10 : 0 - NotConnected.
00:19:10 : 1 - Normal connect success
00:19:10 : 2 - Emergency connect success
00:20:42 : _IsConnectedPhone Call for SmartPhone
00:20:54 : _IsConnectedPhone(0)
00:20:54 : 0 - NotConnected.
00:20:54 : 1 - Normal connect success
00:20:54 : 2 - Emergency connect success
00:20:54 : *****CheckOS Start********
00:20:54 : Microsoft_Windows7_Professional_Service Pack 1
00:20:54 : *****CheckPCSyncPrograms Start*****
00:20:54 : PCSyncPrograms Not Found - OK and ready to upgrade
00:20:54 : Checking the connection with the cell phone...
00:20:54 : dwWaitResetTime(40000 ms)
00:20:55 : _IsConnectedPhone Call
00:21:24 : _IsConnectedPhone(1)
00:21:24 : 0 - NotConnected.
00:21:24 : 1 - Normal connect success
00:21:24 : 2 - Emergency connect success00:23:08 : [011,700,147,062,092]Updating is not possible any longer due to a fatal error.\n\n[009,400,102,102,102]Disconnect from and connect the cable into your phone again and remove \nand install the battery and press the [009,700,102,102,102]'Restart'[009,400,102,102,102] button. This will resume the \nupgrade.\n\n\n\n\n\n\n\n\n\n\n\n\nPress the [009,700,102,102,102]Quit[009,400,102,102,102] button to stop the update. (_CheckPhoneType() Error)
00:23:08 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
00:23:08 : Page_Error ºÎºÐÀÔ´Ï´Ù
00:23:08 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
00:23:08 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
00:21:24 : Phone Mode(1)
00:21:24 : *****GetPhoneType Start*****
Stock based ROM's are EXT3 and CM7 is EXT4. So if you want to go back to a Stock based ROM after flashing CM7, you need wipe, then flash BackToEXT3 first and after that flash the ROM.
yes you need to flash back to ext3 cause CM based on ext4 /system /data that's why you have to flash back to ext3 in order to not get boot loop
You two are f***ing awesome.

Reflashed stock firmware on LG Marquee

Hello,
I have an LG Marquee (seems to Sprint rebranded version of LG Optimus Black). I wanted to reflash my phone back to stock firmware, and there didn't seem to be a good set of directions out there.
Here's what worked for me on Windows 7 Pro:
Downloaded KDZ firmware from this site:
http://www.lg-phones.org/lg-marquee-firmware-download.html
link to: http://www.mediafire.com/?vwruw489w3u9980
Used flashing steps here:
http://forum.xda-developers.com/showthread.php?t=875881
I selected type: 3GQCT - SmartPhone(WM)
Warning: Installing the firmware at your own risk. I’m not responsible for any damage or brick. I don’t recommend you try this. However, if you insist on doing so, backup your phone first.
Re-rooting via these steps:
http://www.lg-phones.org/how-to-root-sprint-lg-marquee.html
Updated 1/28/12 to add new link to KDZ file: http://www.mediafire.com/?vwruw489w3u9980
What state was your phone in? Mine is stuck showing the box with an arrow sticking out of it. I've tried this method with the phone in this state, off, as well as vol +, camera, power to get into "download" mode. None seem to push the fw to the phone.
Any ideas?
A couple of sites suggest trying to boot into recovery mode (volume down+power)
"Hold the Volume Down and Power Button until the soft keys start to flash, then release and you should boot into a recovery mode."
http://forums.androidcentral.com/sprint-lg-marquee/125293-lg-marquee-has-cwm-recovery.html
Another site about doing a factory reset:
http://www.hard-reset.com/lg-marquee-ls855-hard-reset.html
There's also some unbricking tips from here, I wonder if you can use similar steps using the KDZ file for the LG Marquee.
http://forum.xda-developers.com/showthread.php?t=1180331
Are you able to get an adb shell?
Thanks for the quick response. Unfortunately, no joy so far. Windows 7 Pro too.
Volume down and power show the box with the arrow. Factory reset results in the same thing. The only thing that I think works is camera + volume up and power when connected to usb. It goes into a "Software download" mode. Unfortunately I can't figure out how to push the firmware to it. KDZ stops at 4% with no "spam" in the log.
I'm not familiar with adb, but I tried it anyways. It shows no devices found.
Seems like the R&D tool is the furthest that I've gotten. I place the phone into "Download" mode but the tool stops at 4%. Any ideas?
Code:
23:12:15 : [C:\LGMobileUpgrade] Try to delete folder
23:12:15 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
23:12:15 : Start Date : 2011-12-28 23:12:15
23:12:15 : ---------- QM CSE Testmode ---------
23:12:15 : ---------- CSE mode ---------
23:12:15 : ***** Check Tool Version *****
23:12:15 : Tool version : 1.5.4.6
23:12:15 : UpgradeDLL version : 1.2.6.6
23:12:15 : Current Dir : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\B2C_Client
23:12:15 : LGE USB Driver Version :
23:12:15 : Android PDLV Version :
23:12:15 : Android NDLV Version : 3.6
23:12:15 : ******************************************
23:12:15 : [C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone] Try to delete folder
23:12:15 : SetEmerModeAT()
23:12:15 : *****CheckOS Start********
23:12:15 : Microsoft_Windows_XP_Professional_Service Pack 2
23:12:15 : *****CheckPCSyncPrograms Start*****
23:12:16 : PCSyncPrograms Not Found - OK and ready to upgrade
23:12:16 : Checking the connection with the cell phone...
23:12:16 : dwWaitResetTime(40000 ms)
23:12:17 : _IsConnectedPhone Call
23:12:40 : _IsConnectedPhone(2)
23:12:40 : 0 - NotConnected.
23:12:40 : 1 - Normal connect success
23:12:40 : 2 - Emergency connect success
23:12:40 : Phone Mode(2)
23:12:41 : *****CheckPCSyncPrograms Start*****
23:12:42 : PCSyncPrograms Not Found - OK and ready to upgrade
23:12:43 : ****************CheckAndDownload********************
23:12:43 : ******Extract Start C:\Documents and Settings\User\Desktop\LG\P60680.kdz*****
23:12:43 : Model Dll Dir(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\)
23:12:43 : File Size = 179521390
23:12:47 : Extract kdz file Success.
23:12:50 : Extracted C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855ZV9_11.S9_00.P60680.wdb\n
23:12:50 : WDB(or DZ) FullPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855ZV9_11.S9_00.P60680.wdb)
23:12:50 : Extracted C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855_WD_1_0_7_0.dll\n
23:12:50 : Model dll FullPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855_WD_1_0_7_0.dll)
23:12:50 : Extracted C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855ZV9_11.S9_00.P60680.wdh\n
23:12:50 : NNNNN WDB FullPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855ZV9_11.S9_00.P60680.wdb)
23:12:50 : NNNNN Model dll FullPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855_WD_1_0_7_0.dll)
23:12:50 : Extract End C:\Documents and Settings\User\Desktop\LG\P60680.cab
23:12:50 : ------------------Model.dll Information-------------------
23:12:50 : Filename : LS855_WD_1_0_7_0.dll
23:12:50 : Version : 1.0.7.0
23:12:50 : File size : 495733
23:12:50 : File date : 2011/08/04-16:51:36
23:12:50 : PC Created date: 2011/12/28-23:12:50
23:12:50 : ----------------------------------------------------------
23:12:50 : *****Check LGCM Programs Start*****
23:12:50 : LGCM Programs Not Found - OK and ready to upgrade
23:12:51 : *****WorkModelDLL Start*****
23:12:52 : strPhoneBinaryPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855ZV9_11.S9_00.P60680.wdb)
23:12:52 : strModuleDir(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\)
23:12:52 : strModelDLLPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855_WD_1_0_7_0.dll)
23:12:52 : _DetachDLL Call
23:12:52 : _DetachDLL Call End
23:12:52 : Call fn_StartUpgrade
23:12:52 : Phone mode change -> CSE
23:12:52 : ********* CDMA Model.dll input Parameter *************
23:12:52 : MODEL_EVENT : 32769
23:12:52 : PhoneBinaryPath : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855ZV9_11.S9_00.P60680.wdb
23:12:52 : ModuleDir : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\
23:12:52 : BootWaitTime : 49500
23:12:52 : UsbHighSpeed : FALSE
23:12:52 : PhoneMode : 4
23:12:52 : NewPhoneBinVersion : P60680
23:12:52 : ClearSI : FALSE
23:12:52 : AuthMark : 0
23:12:52 : ********* CDMA Model.dll input Parameter End*************
ovel2clock said:
Seems like the R&D tool is the furthest that I've gotten. I place the phone into "Download" mode but the tool stops at 4%. Any ideas?
Code:
23:12:15 : [C:\LGMobileUpgrade] Try to delete folder
23:12:15 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
23:12:15 : Start Date : 2011-12-28 23:12:15
23:12:15 : ---------- QM CSE Testmode ---------
23:12:15 : ---------- CSE mode ---------
23:12:15 : ***** Check Tool Version *****
23:12:15 : Tool version : 1.5.4.6
23:12:15 : UpgradeDLL version : 1.2.6.6
23:12:15 : Current Dir : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\B2C_Client
23:12:15 : LGE USB Driver Version :
23:12:15 : Android PDLV Version :
23:12:15 : Android NDLV Version : 3.6
23:12:15 : ******************************************
23:12:15 : [C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone] Try to delete folder
23:12:15 : SetEmerModeAT()
23:12:15 : *****CheckOS Start********
23:12:15 : Microsoft_Windows_XP_Professional_Service Pack 2
23:12:15 : *****CheckPCSyncPrograms Start*****
23:12:16 : PCSyncPrograms Not Found - OK and ready to upgrade
23:12:16 : Checking the connection with the cell phone...
23:12:16 : dwWaitResetTime(40000 ms)
23:12:17 : _IsConnectedPhone Call
23:12:40 : _IsConnectedPhone(2)
23:12:40 : 0 - NotConnected.
23:12:40 : 1 - Normal connect success
23:12:40 : 2 - Emergency connect success
23:12:40 : Phone Mode(2)
23:12:41 : *****CheckPCSyncPrograms Start*****
23:12:42 : PCSyncPrograms Not Found - OK and ready to upgrade
23:12:43 : ****************CheckAndDownload********************
23:12:43 : ******Extract Start C:\Documents and Settings\User\Desktop\LG\P60680.kdz*****
23:12:43 : Model Dll Dir(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\)
23:12:43 : File Size = 179521390
23:12:47 : Extract kdz file Success.
23:12:50 : Extracted C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855ZV9_11.S9_00.P60680.wdb\n
23:12:50 : WDB(or DZ) FullPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855ZV9_11.S9_00.P60680.wdb)
23:12:50 : Extracted C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855_WD_1_0_7_0.dll\n
23:12:50 : Model dll FullPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855_WD_1_0_7_0.dll)
23:12:50 : Extracted C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\\LS855ZV9_11.S9_00.P60680.wdh\n
23:12:50 : NNNNN WDB FullPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855ZV9_11.S9_00.P60680.wdb)
23:12:50 : NNNNN Model dll FullPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855_WD_1_0_7_0.dll)
23:12:50 : Extract End C:\Documents and Settings\User\Desktop\LG\P60680.cab
23:12:50 : ------------------Model.dll Information-------------------
23:12:50 : Filename : LS855_WD_1_0_7_0.dll
23:12:50 : Version : 1.0.7.0
23:12:50 : File size : 495733
23:12:50 : File date : 2011/08/04-16:51:36
23:12:50 : PC Created date: 2011/12/28-23:12:50
23:12:50 : ----------------------------------------------------------
23:12:50 : *****Check LGCM Programs Start*****
23:12:50 : LGCM Programs Not Found - OK and ready to upgrade
23:12:51 : *****WorkModelDLL Start*****
23:12:52 : strPhoneBinaryPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855ZV9_11.S9_00.P60680.wdb)
23:12:52 : strModuleDir(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\)
23:12:52 : strModelDLLPath(C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855_WD_1_0_7_0.dll)
23:12:52 : _DetachDLL Call
23:12:52 : _DetachDLL Call End
23:12:52 : Call fn_StartUpgrade
23:12:52 : Phone mode change -> CSE
23:12:52 : ********* CDMA Model.dll input Parameter *************
23:12:52 : MODEL_EVENT : 32769
23:12:52 : PhoneBinaryPath : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LS855ZV9_11.S9_00.P60680.wdb
23:12:52 : ModuleDir : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\
23:12:52 : BootWaitTime : 49500
23:12:52 : UsbHighSpeed : FALSE
23:12:52 : PhoneMode : 4
23:12:52 : NewPhoneBinVersion : P60680
23:12:52 : ClearSI : FALSE
23:12:52 : AuthMark : 0
23:12:52 : ********* CDMA Model.dll input Parameter End*************
Click to expand...
Click to collapse
rename file from P60680.kdz to V20A_00.kdz
Still no luck. Hangs at 4%. FYI, I'm on Sprint.
Should I be in the "download" mode or just off?
Appreciate all the help so far!
As far as I rembember, is it nomal, that it gets stuck at 4%... It keeps on uploading, you just need to wait long enough, but u can find information on that somewhere here in the forum. Maybe just wait for half an hour or so, maybe u even see ur phone rebooting, dont exactly remember...
And download mode is fine i guess
Yikes, sounds frustrating.
I found some tips here:
[HOWTO] Rooting, Installing - Android SDK, Custom Recovery, Custom ROM's
http://forum.xda-developers.com/showthread.php?t=1007244
and
[HOWTO] Phone not responding at all - last chance to repair
http://forum.xda-developers.com/showthread.php?t=883314
Let us know if they work
Unfortunately, no matter what combination of buttons/computers/OS's I tried I still couldn't get it to push the firmware to the device. Wound up bringing it into the Sprint store and getting it replaced.
Thanks to everyone who offered up their help. Hopefully once Boost Mobile gets the Marquee there will be more attention on this phone.
Note to anyone who roots, don't uninstall applications via Titanium Backup.
These directions worked great for me. I had to do a factory reset afterwards and all the Sprint apps (that I had removed with TI) came back.
any chance somone can repost the kdz file for the marquee. unfortunately as we all know the megaupload link no longer workie. thanks fellas
Uploaded KDZ to mediafire, updated original post with this URL to download it:
http://www.mediafire.com/?vwruw489w3u9980
Had to do this twice already for deleting stock apps with TI.
Im done with trying to remove the bloat apps.
I've been trying this method to restore a Marquee stuck in a boot loop. Unfortunately, I can't get the phone to do anything past getting in software download mode. I plug in the phone, it gets recognized as a modem by Windows (a good sign) and then it immediately disconnects and the computer no longer recognizes the phone. Any ideas?
LG Marquee to look like LG Optimus Black
I have a Sprint LG Marquee but I would like for it to have the look and feel of the LG Optimus Black. I know absolutely nothing about ROMS or Rooting or Flashing. I just know that I would really like if my phone had the layout of the LG Optimus Black. Any suggestions on how I could potentially make this possible?
I haven't seen much love for the LG Marquee on this board. I recommend going here : http://androidforums.com/marquee-all-things-root/

problems flashing back to stock rom from CM7

After flashing CM7 nightly and moving back to stock I can flash stock rom only once
What i mean is when trying 2nd time to flash stock rom from stock rom with R&D tool kit it gets stuck and doesnt finish off
So i can flash to stock say 10c coming from CM7 nightly
butn when im on 10c if i want to flash to 10D or any other version it just doesnt complete process of flashing and stays at previous rom
Dont know what im missing maybe any help would be appreciated thanks
So as a mater of facts the problem is not after flashing back from CM 7 but from flashing from stock to stock changing the name of the thread it will get a better reply on your issue.
And as an answer to your question... hard to answer I suppose that you did all the steps with clear cache clear data etc.
A better description of the steps you do when you encounter the issue will bring you a better answer.
Regards,
Me
Have you tried factory resetting it?
Laier94 said:
Have you tried factory resetting it?
Click to expand...
Click to collapse
Cleared cache dalvick reset data done everything
It never used to do this will try and get copy of log when trying to flash 2nd time
Just aswell this is my 2nd phone
here is the message i get , weird iv flashed phoned several times before using r&d method with no probs before
12:06:37 : [C:\LGMobileUpgrade] Try to delete folder
12:06:37 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
12:06:37 : Start Date : 2011-12-21 12:06:37
12:06:37 : ---------- QM CSE Testmode ---------
12:06:37 : ---------- CSE mode ---------
12:06:37 : ***** Check Tool Version *****
12:06:37 : Tool version : 1.5.4.4
12:06:37 : UpgradeDLL version : 1.2.6.5
12:06:37 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
12:06:37 : LGE USB Driver Version : 4.9.7.0
12:06:37 : Android PDLV Version : 2.2
12:06:37 : Android NDLV Version :
12:06:37 : ******************************************
12:06:37 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
12:06:37 : SetEmerModeAT()
12:06:37 : *****CheckOS Start********
12:06:37 : Microsoft_Windows7_Professional_
12:06:37 : *****CheckPCSyncPrograms Start*****
12:06:38 : PCSyncPrograms Not Found - OK and ready to upgrade
12:06:38 : Checking the connection with the cell phone...
12:06:38 : dwWaitResetTime(40000 ms)
12:06:39 : _IsConnectedPhone Call
12:07:00 : _IsConnectedPhone(2)
12:07:00 : 0 - NotConnected.
12:07:00 : 1 - Normal connect success
12:07:00 : 2 - Emergency connect success
12:07:00 : Phone Mode(2)
12:07:01 : *****CheckPCSyncPrograms Start*****
12:07:02 : PCSyncPrograms Not Found - OK and ready to upgrade
12:07:03 : ****************CheckAndDownload********************
12:07:03 : ******Extract Start C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00.kdz*****
12:07:03 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
12:07:03 : File Size = 240079641
12:07:05 : Extract kdz file Success.
12:07:06 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10E.wdb\n
12:07:06 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V10E.wdb)
12:07:07 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LGP970.dll\n
12:07:07 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LGP970.dll)
12:07:07 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb)
12:07:07 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGP970.dll)
12:07:07 : Extract End C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00.cab
12:07:07 : ------------------Model.dll Information-------------------
12:07:07 : Filename : LGP970.dll
12:07:07 : Version : 1.0.0.2
12:07:07 : File size : 262144
12:07:07 : File date : 2011/04/05-23:43:32
12:07:07 : PC Created date: 2011/12/21-12:07:06
12:07:07 : ----------------------------------------------------------
12:07:07 : *****Check LGCM Programs Start*****
12:07:07 : LGCM Programs Not Found - OK and ready to upgrade
12:07:08 : *****WorkModelDLL Start*****
12:07:10 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb)
12:07:10 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
12:07:10 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGP970.dll)
12:07:10 : _DetachDLL Call
12:07:10 : _DetachDLL Call End
12:07:10 : Call fn_StartUpgrade
12:07:10 : Phone mode change -> CSE
12:07:10 : ********* CDMA Model.dll input Parameter *************
12:07:10 : MODEL_EVENT : 32769
12:07:10 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V10E.wdb
12:07:10 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
12:07:10 : BootWaitTime : 49500
12:07:10 : UsbHighSpeed : FALSE
12:07:10 : PhoneMode : 4
12:07:10 : NewPhoneBinVersion : EUROPE.OPEN.LGP970.V10E_00
12:07:10 : ClearSI : FALSE
12:07:10 : AuthMark : 0
12:07:10 : ********* CDMA Model.dll input Parameter End*************
12:07:15 : wParam : 2004, lParam = 7
12:07:15 : MODEL DLL Event : (2004, 7)
12:07:16 : Model Dll Msg Not Found(2004, 7)
12:07:16 : wParam : 2007, lParam = 0
12:07:16 : MODEL DLL Event : (2007, 0)
12:07:17 : Model Dll Msg Not Found(2007, 0)
12:07:17 : wParam : 2010, lParam = 3002
12:07:17 : MODEL DLL Event : (2010, 3002)
12:07:17 : Model Dll Msg Not Found(2010, 3002)
Maybe you can flash *.bin,this is full size rom.But when i flash from 10c to 10D ,i has done and could work.You'd better cheak your steps carefully.
JasonQMe said:
Maybe you can flash *.bin,this is full size rom.But when i flash from 10c to 10D ,i has done and could work.You'd better cheak your steps carefully.
Click to expand...
Click to collapse
Figured it out
now this is weird the software kdz files i had previously downloaded from another sited work , but recently iv been downloading from filesonic and none of their kdz files are working for my phone at all now downloaded and tried them all
anyway thanks people but they all work fine now
didnt realise i had origina downloads on other harddrive
this thread can be closed now
maniAK- said:
Figured it out
now this is weird the software kdz files i had previously downloaded from another sited work , but recently iv been downloading from filesonic and none of their kdz files are working for my phone at all now downloaded and tried them all
anyway thanks people but they all work fine now
didnt realise i had origina downloads on other harddrive
this thread can be closed now
Click to expand...
Click to collapse
So basically,the the kdz file you flashed with earlier wasn't working,so you downloaded a new kdz file,flashed it with the new one,and it worked? Simple as that?
Keep only "V10E_00.kdz" as firmware name.
Sent from my LG-P970
12:07:03 : ******Extract Start C:\Users\Mani\Downloads\EUROPE.OPEN.LGP970.V10E_00 .kdz*****
Click to expand...
Click to collapse
rgabi is right
Been flashing Samsung Galaxy S1 and 2 for so long now little bit different from this phone , feel like such a noob now and thanks for pointing it out

Help me return to Stock (Verizon LG G2)

I followed THIS thread exactly how it told me to, but its not working. Is this outdated and perhaps a new thread around that can help? Here is a post I made in the thread I linked if it helps:
______________________________________________________________________________________________________
Using method 1, when i get to step 5 I selected "Different Country." The LG Mobile support tool opens, then gives me an error saying the phone is disconnected from the PC. I remember I had to set the phone to ethernet mode to flash 4.4.2 onto the phone, but now I only have MTP or PTP to choose from. Could that be the problem? I cant get past step 5 to restore my phone....can someone help please?
Hee is the log file from the LG Mobile support tool if it helps:
01:28:46 : Restart.....
01:28:46 : Start Date : 2014-03-17 01:28:46
01:28:46 : ---------- QM Testmode ---------
01:28:46 : ***** Check Tool Version *****
01:28:46 : Tool version : 1.6.9.0
01:28:46 : UpgradeDLL version : 2.1.5.0
01:28:46 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
01:28:46 : LGE USB Driver Version :
01:28:46 : Android PDLV Version :
01:28:46 : Android NDLV Version :
01:28:46 : ******************************************
01:28:46 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
01:28:46 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
01:28:46 : SetEmerModeAT()
01:28:46 : *****CheckOS Start********
01:28:46 : Microsoft_Windows7_Professional_Service Pack 1
01:28:46 : *****CheckPCSyncPrograms Start*****
01:28:47 : PCSyncPrograms Not Found - OK and ready to upgrade
01:28:47 : Verifying phone connection...
01:28:47 : dwWaitResetTime(40000 ms)
01:28:48 : _IsConnectedPhone Call
01:28:48 : _IsConnectedPhone(0)
01:28:48 : 0 - NotConnected.
01:28:48 : 1 - Normal connect success
01:28:48 : 2 - Emergency connect success
01:28:49 : _IsConnectedPhone Call
01:28:49 : _IsConnectedPhone(0)
01:28:49 : 0 - NotConnected.
01:28:49 : 1 - Normal connect success
01:28:49 : 2 - Emergency connect success
01:28:50 : _IsConnectedPhone Call
01:28:50 : _IsConnectedPhone(0)
01:28:50 : 0 - NotConnected.
01:28:50 : 1 - Normal connect success
01:28:50 : 2 - Emergency connect success
01:28:50 : The USB cable is not connected with the phone.\nConnect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
01:29:06 : _IsConnectedPhone Call
01:29:06 : _IsConnectedPhone(0)
01:29:06 : 0 - NotConnected.
01:29:06 : 1 - Normal connect success
01:29:06 : 2 - Emergency connect success
01:29:06 : The USB cable is not connected with the phone.\nConnect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
01:29:09 : _IsConnectedPhone Call
01:29:09 : _IsConnectedPhone(0)
01:29:09 : 0 - NotConnected.
01:29:09 : 1 - Normal connect success
01:29:09 : 2 - Emergency connect success
01:29:09 : The USB cable is not connected with the phone.\nConnect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
01:31:31 : _IsConnectedPhone Call
01:31:31 : _IsConnectedPhone(0)
01:31:31 : 0 - NotConnected.
01:31:31 : 1 - Normal connect success
01:31:31 : 2 - Emergency connect success
01:31:31 : The USB cable is not connected with the phone.\nConnect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
01:31:33 : _IsConnectedPhone Call
01:31:33 : _IsConnectedPhone(0)
01:31:33 : 0 - NotConnected.
01:31:33 : 1 - Normal connect success
01:31:33 : 2 - Emergency connect success
01:31:33 : The USB cable is not connected with the phone.\nConnect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
01:32:15 : _IsConnectedPhone Call
01:32:15 : _IsConnectedPhone(0)
01:32:15 : 0 - NotConnected.
01:32:15 : 1 - Normal connect success
01:32:15 : 2 - Emergency connect success
01:32:15 : The USB cable is not connected with the phone.\nConnect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
01:32:19 : _IsConnectedPhone Call
01:32:19 : _IsConnectedPhone(0)
01:32:19 : 0 - NotConnected.
01:32:19 : 1 - Normal connect success
01:32:19 : 2 - Emergency connect success
01:32:19 : The USB cable is not connected with the phone.\nConnect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
01:33:38 : Check Cancel button active..
01:33:38 : Check Cancel button active..
01:33:38 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
01:33:38 : Page_Error ºÎºÐÀÔ´Ï´Ù
01:33:38 : LG Mobile Phone S/W Upgrade is canceled.\nTo finish the LG Mobile Phone S/W Upgrade, press the 'Finish' button below.
01:33:38 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Click to expand...
Click to collapse
If it helps, I'm also running Win7x64
HeatM1ser said:
I followed THIS thread exactly how it told me to, but its not working. Is this outdated and perhaps a new thread around that can help? Here is a post I made in the thread I linked if it helps:
______________________________________________________________________________________________________
Using method 1, when i get to step 5 I selected "Different Country." The LG Mobile support tool opens, then gives me an error saying the phone is disconnected from the PC. I remember I had to set the phone to ethernet mode to flash 4.4.2 onto the phone, but now I only have MTP or PTP to choose from. Could that be the problem? I cant get past step 5 to restore my phone....can someone help please?
Hee is the log file from the LG Mobile support tool if it helps:
If it helps, I'm also running Win7x64
Click to expand...
Click to collapse
Anyone?!?!?!
C'mon...nobody is willing to help?!?!?!
http://forum.xda-developers.com/showthread.php?t=2448960
No need to thank me. Just doin mah job.
But seriously it was pretty easy to find this with a search. It does help that I have used it myself.
Thank you...I found that method, but didnt know TOT files worked for Verizon...I'll try that method and see if it works for me.
Tazer2death said:
http://forum.xda-developers.com/showthread.php?t=2448960
No need to thank me. Just doin mah job.
But seriously it was pretty easy to find this with a search. It does help that I have used it myself.
Click to expand...
Click to collapse
I'm going to thank you anyway...this method worked!!! Thank you very very very very very much!!!

Categories

Resources