Database Develop

I can't Connect My Bricked Phone..

Hello Xda... I Can't Connect My bricked Phone to Pc. When i put it and turn it on flash mode it tells that failed to install the device drivers. Seus , PC Companion , Flashtool Can't Recognize it. can anyone help me? Thanks In advance.

First of all how you broke it? Second before you can proceed with seus or any other tool you need to install all drivers for your phone.....
Sent from my E15 using XDA App

dsaklein said:
First of all how you broke it? Second before you can proceed with seus or any other tool you need to install all drivers for your phone.....
Sent from my E15 using XDA App
Click to expand...
Click to collapse
i installed CM7 rom from NaA the new one , without the custom kernel. i can't go to recoveries. how can i fix it ?

eu8umhc said:
i installed CM7 rom from NaA the new one , without the custom kernel. i can't go to recoveries. how can i fix it ?
Click to expand...
Click to collapse
How far does your phone boot-up?
Do you still see something on your screen?
Does the LED still light up (when connected to the charger/USB)?
If you haven't killed the boot-loader you should be able to recover the device with Flashtool ... if the boot-loader is dead I think there's no easy way to resurrect it.
Of course the unsolved question is if it would need a intact kernel as well AND if custom kernels actually support "Flash mode".

B.Jay said:
How far does your phone boot-up?
Do you still see something on your screen?
Does the LED still light up (when connected to the charger/USB)?
If you haven't killed the boot-loader you should be able to recover the device with Flashtool ... if the boot-loader is dead I think there's no easy way to resurrect it.
Of course the unsolved question is if it would need a intact kernel as well AND if custom kernels actually support "Flash mode".
Click to expand...
Click to collapse
i See The Flash Mode Green LEd yes. When I Start it, i see the SOny ericsson logo and it stucks there. i try to connecto to pc and it can't install drivers for device. how can i rescue it? tommorow i have a lesson and i need it :S and also it tells that cant recognized.

B.Jay said:
How far does your phone boot-up?
Do you still see something on your screen?
Does the LED still light up (when connected to the charger/USB)?
If you haven't killed the boot-loader you should be able to recover the device with Flashtool ... if the boot-loader is dead I think there's no easy way to resurrect it.
Of course the unsolved question is if it would need a intact kernel as well AND if custom kernels actually support "Flash mode".
Click to expand...
Click to collapse
Finally I did it! Big Thanks to you. I Installed the drivers and it recognized. big thanks

Well, that's exactly from where Vlackrs and I already recovered our phones after a bad flash ("stuck at the Sony Ericsson logo").
Start Flashtool and select "Check drivers".
If it turns out as "OK" on all three checks it seems you have the drivers installed already.
If not ... try to install Gordon's Gate (should be included with Flashtool and called "ggsetup.exe").
Follow the instructions I wrote up here to restore the device.
Note that I did NOT use Flashtool 0.5 as 0.5.0.0, 0.5.0.1 and 0.5.0.2 failed to recognize the device (and yes, I replaced the "E15.properties" with the files posted in the Flashtool thread in the Development section) - Flashtool 0.2.9.1 did the trick for us.
Edit
eu8umhc said:
Finally I did it! Big Thanks to you. I Installed the drivers and it recognized. big thanks
Click to expand...
Click to collapse
Ok - good you got the driver problem resolved ... seems I was too slow writing up my post.

B.Jay said:
Well, that's exactly from where Vlackrs and I already recovered our phones after a bad flash ("stuck at the Sony Ericsson logo").
Start Flashtool and select "Check drivers".
If it turns out as "OK" on all three checks it seems you have the drivers installed already.
If not ... try to install Gordon's Gate (should be included with Flashtool and called "ggsetup.exe").
Follow the instructions I wrote up here to restore the device.
Note that I did NOT use Flashtool 0.5 as 0.5.0.0, 0.5.0.1 and 0.5.0.2 failed to recognize the device (and yes, I replaced the "E15.properties" with the files posted in the Flashtool thread in the Development section) - Flashtool 0.2.9.1 did the trick for us.
Edit
Ok - good you got the driver problem resolved ... seems I was too slow writing up my post.
Click to expand...
Click to collapse
It's ok . the info you gave me is important. now i will read the link you gave me. Big Thanks Again..

can someone help me please...i restored a backup of gingerdx and after that i'm stuck in SE screen and led not working when connected to pc

cant on

my phone cant on
i think i accidently formated the system
gt any link hw 2 recover back?
urgent

mmore info. plz so i might help

try flash stock rom using flashtool or use pc companior or seus to repair ur phone
Sent from my X8 using xda premium

gsrex said:
my phone cant on
i think i accidently formated the system
gt any link hw 2 recover back?
urgent
Click to expand...
Click to collapse
uSe SEUS/flashtool...

once i on my phone,
only appear sony ericsson for long time
after a few hours still same

u r still lucky!
use SEUS or PCC or FlashTool
u can use search button how to fix it..
my advice don't play with bootloader
it will kill your phone if u make a bit mistake

Download flashtool,
Download rom image- http://www.multiupload.com/XLV6AA41DB
Download baseband - http://forum.xda-developers.com/showthread.php?t=976538
Copy both rom image and baseband to firmwares folder of flashtool
First flash rom image and then baseband....

it's easy if u still have the SE logo
1.Download PC companion for x8
2.Dont connect your phone
3. Go support Zone
4.Go software update
5. click Repair phone
6.follow instructions ...
very simple ...
unlike me ...my phone is now dead brick ...i think theres no solution for me now ...just be careful when bootloading your phone , once you do it wrongly its dead brick have to be serviced ...

[Q] kernel flashing problem

guys please help me..
my bootloader is already unlocked and im using nAa 08
i reinstalled my windows yesterday
i installed "flashtool 6.6 windows" and cant flash any other kernel
when i enter flash mode pc says cant recognise this device(i think i have lost x8 drivers...dont know exactly)
should i reinstall s1 tool,gordons gate....
solutions please...
thank you..

Super Combo problem in my xperia x8.....

Well this is my first post here.
To be very short this is not a totally new problem. This is a combination of many problems that has made me totally helpless.
I had rooted my device using x8toolbox beta4, and installed a Gingerxperia V21 custom ROM.
After that i tried unlocking the bootloader, but flashtools continuously kept saying that my device was in MTP mode and strange enough there was no option in my phone's settings to change it.
So I went back to x8toolbox planning on installing the stock ROM back, when i saw busybox installer within.
I installed busybox 1.19.0 and then i asked x8toolbox to check the digitizer on my phone, AND THERE IT STARTED REBOOTING OVE AND OVER.
So now my phone can't connect to my pc for PCC repair or flashtools as MTP mode can't be switched off (and my phone won't turn on for the sd card to be read). And i am stuck with the Sony Ericsson Logo.
Please help me.....thanks in advance.

U have soft bricked your x8.
U can reset your x8 to original 2.1 with the help of following steps.
It's easy. Do it and rooted your phone again
forum.xda-developers.com/showthread.php?t=1570523
Officially corp via W8

Or just try Flashtool

i think your problem is flashing driver.. try to install on /flashtool/drivers/ the name of drivers is gordon gate.. but if your have a same problem after installed drivers, check your drivers on my computer/drivers.. or try for flashing on other computer..

leecorp said:
U have soft bricked your x8.
U can reset your x8 to original 2.1 with the help of following steps.
It's easy. Do it and rooted your phone again
forum.xda-developers.com/showthread.php?t=1570523
Officially corp via W8
Click to expand...
Click to collapse
Thanks for your answer..... But as I said my phone is still in MTP mode and doesn't seem to snap out of it. As i plug in my phone it turns on the green light and then starts rebooting as usual. Is it my driver 's issue? or is it just the mtp mode?? flashtool also says the same thing..:crying:

U cant keep it longer.
Open flashtool then select firmware and ok.
Wait till a screen appear.
Now connect ur phone by holiding back button.
Sent from my X8 using Tapatalk 2

bandarigoda123 said:
U cant keep it longer.
Open flashtool then select firmware and ok.
Wait till a screen appear.
Now connect ur phone by holiding back button.
Sent from my X8 using Tapatalk 2
Click to expand...
Click to collapse
But flashtools shows ERROR and flashing aborted and says that for 2011 line devices make sure your device is not in mtp mode....
Flashtools doesn't work that way....

Remember , wana unlock bootloader use stock rom to unlock. Do not use any install custom rom to unlock. Thing u have made a misstake.

kakho55 said:
Remember , wana unlock bootloader use stock rom to unlock. Do not use any install custom rom to unlock. Thing u have made a misstake.
Click to expand...
Click to collapse
So what to do now? Even if i can get my phone back can i unlock the bootloader (manufact. code: 11W33) ????
Help me plzz...

livinglegend9894 said:
So what to do now? Even if i can get my phone back can i unlock the bootloader (manufact. code: 11W33) ????
Help me plzz...
Click to expand...
Click to collapse
DONT UNLOCK!!!!!!!!!! HARD BRICK!
Sent from my E15i using xda premium

Don't try to unlock the Bootloader
If the error getting further, Re-install Windows.
It can't be, 3 weeks ago I had the same problem (MTP) .
I can't even install Apps via flashtool, so I try to connect to flashmode.
It works.
As I said try to Re-install windows.
Good Luck.

[Q] Help! I think i bricked my x8

Hey guys, sorry if I write bad.
I tried to flash my x8 for put in the rom GingerDX v31b. Anyways... I think my USB cable was broken or something, when I tried to flash baseband 015, it was flashed but then I power on my phone and... Boom! That image appeared: a triangle with a exclamation sign and a phone .
It reboots again and again, my computer doesn't recognize the phone. I need help guys. Sorry for bad writing.
On the other hand.. I have my phone with unlocked bootloader, and I installed so much roms. Any question? sorry if I forgot something. Thank you guys and sorry again if I put the thread in the wrong place.
Francisco Fávaro.

hmm you are sure that flashtool doesnt recognize it?
if you cant use flashtool then go to recovery
i hope this is going to solve he problem
send from xperia x8

little help
Hi,
I've tried to flash my xperia x8 with flashtool but after the flashing, my phone turn off and it won't turn on or connect to the pc. Is it broken for good or there is still hope

noki severgun said:
Hi,
I've tried to flash my xperia x8 with flashtool but after the flashing, my phone turn off and it won't turn on or connect to the pc. Is it broken for good or there is still hope
Click to expand...
Click to collapse
Look under your battery inside the phone. There is a number like 10W34 or 11W10
What is your number?

1.turn of the device
2.open pc companion
3.click support zone
4.click update without connected phone
5.It will ask you about repair(something like that..)
6.click yes
7.wait the program to prepare the pc
8.chose the x8 from devices list
9.wait until download the rom
10.plug the device when the program say to..

CtrlAltDelIrl said:
Look under your battery inside the phone. There is a number like 10W34 or 11W10
What is your number?
Click to expand...
Click to collapse
it is 11w16

Wait...why do you think it's something about bootlader???
just connect to flashtool and recover or if can't be recognized then try with PC Companion else reinstall rom or restore backup with recovery
---------- Post added at 03:44 PM ---------- Previous post was at 03:31 PM ----------
noki severgun said:
Hi,
I've tried to flash my xperia x8 with flashtool but after the flashing, my phone turn off and it won't turn on or connect to the pc. Is it broken for good or there is still hope
Click to expand...
Click to collapse
Ok you flash something but WHAT?
All i know that you have 11W16 and you can't hard brick that(unless you are really..... )
Anyway let's help you out
First of all,how many % did your battery have before flashing?
If under 10% then try to connect the charger
if it done't help keep reading
What did you do with flashtool--->FLASHING or UNLOCKING BOOTLOADER?
If FLASHING: What did you flash,please write down name of file
If UNLOCKING BOOTLOADER:
Try to turn on you phone--->If it won't turn on---->try to connect it to PC in flashmode so FLASHTOOL can recognize it
If FLASHTOOL can't recognize it try with PCC.....if that doesn't work either see does your phone have any Signs of life
If you'r phone is completly dead(no sign of life) than it's probably a HARD BRICK
I hope i helped :good:

big THANKS
8cpaiw said:
Wait...why do you think it's something about bootlader???
just connect to flashtool and recover or if can't be recognized then try with PC Companion else reinstall rom or restore backup with recovery
---------- Post added at 03:44 PM ---------- Previous post was at 03:31 PM ----------
Ok you flash something but WHAT?
All i know that you have 11W16 and you can't hard brick that(unless you are really..... )
Anyway let's help you out
First of all,how many % did your battery have before flashing?
If under 10% then try to connect the charger
if it done't help keep reading
What did you do with flashtool--->FLASHING or UNLOCKING BOOTLOADER?
If FLASHING: What did you flash,please write down name of file
If UNLOCKING BOOTLOADER:
Try to turn on you phone--->If it won't turn on---->try to connect it to PC in flashmode so FLASHTOOL can recognize it
If FLASHTOOL can't recognize it try with PCC.....if that doesn't work either see does your phone have any Signs of life
If you'r phone is completly dead(no sign of life) than it's probably a HARD BRICK
I hope i helped :good:
Click to expand...
Click to collapse
First of all THANKS A LOT for your effort, I mean: really THANKS!!!
So let me tell you a story
It was my forth x8 phone that I've tried to install CM9 on and previously it went very well but yesterday I've did it in a hurry and forget to change the flash file on the flash tool and when I click on the magic button with the flash sign I've realized that the x8 was flashed with x10 firmware the default firmware on the flashtool program (really stupid mistake ). After that the phone turn off and went on haven.
After I cold my head and start to search for new x8 (to replace the broken one) I've realized that the phone has 24 month warranty and the first thing that I did this morning was to return the phone to the shop that was bot from.
I hope that some of you out there had 5 min lol session from my experience in the story, and please, If somebody else thinks that he knows how to do it without reading the manual - this are the consequences!!!
The only way to bring this phone alive is with riff jtag box that I didn't have.
P.S. **** happens

Yes a few people from forum flashed wrong firmware and got hard bricked....amm it's hard brick so they will replace your motherboard
I am glad to help