Related
ppl pls hlp me with the miniCm7 ROM v2.1.5 i'm not able to flash nAa kernal on my phone pls help me to do so
Thanks in advance...............
i have somehow installed the MINICM7 v2.0.5 ,however the update requires the nAa kernel ,which i'm not able to flash since the flash tool says "flashing aborted" and "tick unknown sources and USB debugging " i power up my phone and did the following but i doesn't flash the kernel and i'm stuck with the the MINICM7 v2.0.5 i'm not able to update pls help me with this............................
you need to say something more about your problem .. i installed Minicm7 today without nAa kernel and now phone does not boot , recoveries does not work , SEUS says i have my phone updated , Flashtool Doesnot for because it says ''Instalation aborted , go to settings and tick usb debuggnig and unknown sources" but i cant even power up my phone .. PCC Repair function is my last chance i think ;/
Edit: Ohh PCC Does not work too , it says my phone is updated... ;// WHAT TO DO ???!!! Please help meeeeeeeeeee !!
proadi96 said:
you need to say something more about your problem .. i installed Minicm7 today without nAa kernel and now phone does not boot , recoveries does not work , SEUS says i have my phone updated , Flashtool Doesnot for because it says ''Instalation aborted , go to settings and tick usb debuggnig and unknown sources" but i cant even power up my phone .. PCC Repair function is my last chance i think ;/
Click to expand...
Click to collapse
are you hawe unlocked bootloader if not then flashtool wont help you use pcc companion
---------- Post added at 02:01 PM ---------- Previous post was at 02:00 PM ----------
proadi96 said:
you need to say something more about your problem .. i installed Minicm7 today without nAa kernel and now phone does not boot , recoveries does not work , SEUS says i have my phone updated , Flashtool Doesnot for because it says ''Instalation aborted , go to settings and tick usb debuggnig and unknown sources" but i cant even power up my phone .. PCC Repair function is my last chance i think ;/
Edit: Ohh PCC Does not work too , it says my phone is updated... ;// WHAT TO DO ???!!! Please help meeeeeeeeeee !!
Click to expand...
Click to collapse
aply instalation any way in pcc it must by that option
norbula2008 said:
are you hawe unlocked bootloader if not then flashtool wont help you use pcc companion
---------- Post added at 02:01 PM ---------- Previous post was at 02:00 PM ----------
aply instalation any way in pcc it must by that option
Click to expand...
Click to collapse
yes my Bootloader is unlocked because few days ago i was using linuxdx and alfs kernel, how to apply it again ? it says that phone must be turned on , but it can boot only to SE logo then nothing .. what to do exacly in PCC ? really please help me cuz i need my phone ....... xD
oh and when i do repair with PCC it says my phone is up to date and i have to try again later ;/ What To Dooooooo ?
I got this before then I just sent to SE...
U can try with other PC or laptop...
try to touch the screen instead pressing volume down button into CWM
My phone I send to SE 2times...
be care full if u want to play with kernel..
I cannot help you. But i have a comment: I think the custom kernel is better than the stock, but the custom have a lots of problem. It can be with installation, updating, changing, or something and you phone goes to brick. So this reason is why i dont unlock my bootloader.
The problem is, i cannot use some rom like miniCM2.1.5 which is my fav with gingerDX, but it dont worth for my phones "life".
proadi96 said:
yes my Bootloader is unlocked because few days ago i was using linuxdx and alfs kernel, how to apply it again ? it says that phone must be turned on , but it can boot only to SE logo then nothing .. what to do exacly in PCC ? really please help me cuz i need my phone ....... xD
oh and when i do repair with PCC it says my phone is up to date and i have to try again later ;/ What To Dooooooo ?
Click to expand...
Click to collapse
i turn to pcc my phon and his said that i hawe new program but i can repair them and you need klick repair
Ok i get my phone to work just flashing rom in FlashTool i wasnt need to sent it to repair
About my X8
i have somehow installed the MINICM7 v2.0.5 ,however the update requires the nAa kernel ,which i'm not able to flash since the flash tool says "flashing aborted" and "tick unknown sources and USB debugging " i power up my phone and did the following but i doesn't flash the kernel and i'm stuck with the the MINICM7 v2.0.5 i'm not able to update pls help me with this................
Thanks
i have somehow installed the MINICM7 v2.0.5 ,however the update requires the nAa kernel ,which i'm not able to flash since the flash tool says "flashing aborted" and "tick unknown sources and USB debugging " i power up my phone and did the following but i doesn't flash the kernel and i'm stuck with the the MINICM7 v2.0.5 i'm not able to update pls help me with this................
Thanks
hey guys.i have only one working pc in the house,and thats my moms pc.i am not actually allowed to be on this pc,but as i cracked the password,im on it over the night (such as right now).so,i did everything through that pc,rooted my phone,unlocked my bootloader,flashed my first kernel...so the problems started when i tried to flash my second kernel.thats nobodyAtall's ics kernel.so i tried,and i had the flash tool all set,gordon's gate drivers and SEMC drivers also installed,antivirus disabled...and i can easly connect my phone to my pc,in debugging mode,everything,except flash mode.yes,my pc doesnt recognize it only in flash f***ing mode.the flashtools from 2.9.1 and above do work with x8,and 2.9.1 doesnt even find it,and 6.7.0 says:''xperia found in flash mode''
and when i try to flash a kernel:''error.kernel installation aborted.''
i have uninstalled and reinstalled flashtool,all drivers,redownloaded all...and nothing worked.at the end i have installed ics kernel on my girlfriends pc,but now i want to go back to gingerbread again,and still nothing.I'VE EVEN WANTED TO REFLASH STOCK KERNEL AND ROM WITH SONY ERICSSON UPDATE SERVICE BUT IT ALSO DIDNT FIND MY PHONE!!!
help guys...you are my last chance...
there is a software named wotan client, try it to restore your phone to stock rom.
Try Flashtool 2.9.1
Flashtool 6.x.x creates problems for me
Tips-
-make sure usb debugging is on
-gordon's gate installed
or-install SEMC drivers manually
How to install semc drivers manually?
Sent from my E15i using Tapatalk
Connect your phone in debugging mode go to device manager (maybe don't remember) in control panel the find the semc device there you can install drivers
Ps try to pull out the battery leave it for a couple of minutes and then connect flash mode
Cheers
Sent from my E15i using xda premium
Doesnt work on my pc.i dont know what to do.it works on my gf‘s laptop...
Sent from my LG-P350 using Tapatalk
Well this is my first post here.
To be very short this is not a totally new problem. This is a combination of many problems that has made me totally helpless.
I had rooted my device using x8toolbox beta4, and installed a Gingerxperia V21 custom ROM.
After that i tried unlocking the bootloader, but flashtools continuously kept saying that my device was in MTP mode and strange enough there was no option in my phone's settings to change it.
So I went back to x8toolbox planning on installing the stock ROM back, when i saw busybox installer within.
I installed busybox 1.19.0 and then i asked x8toolbox to check the digitizer on my phone, AND THERE IT STARTED REBOOTING OVE AND OVER.
So now my phone can't connect to my pc for PCC repair or flashtools as MTP mode can't be switched off (and my phone won't turn on for the sd card to be read). And i am stuck with the Sony Ericsson Logo.
Please help me.....thanks in advance.
U have soft bricked your x8.
U can reset your x8 to original 2.1 with the help of following steps.
It's easy. Do it and rooted your phone again
forum.xda-developers.com/showthread.php?t=1570523
Officially corp via W8
Or just try Flashtool
i think your problem is flashing driver.. try to install on /flashtool/drivers/ the name of drivers is gordon gate.. but if your have a same problem after installed drivers, check your drivers on my computer/drivers.. or try for flashing on other computer..
leecorp said:
U have soft bricked your x8.
U can reset your x8 to original 2.1 with the help of following steps.
It's easy. Do it and rooted your phone again
forum.xda-developers.com/showthread.php?t=1570523
Officially corp via W8
Click to expand...
Click to collapse
Thanks for your answer..... But as I said my phone is still in MTP mode and doesn't seem to snap out of it. As i plug in my phone it turns on the green light and then starts rebooting as usual. Is it my driver 's issue? or is it just the mtp mode?? flashtool also says the same thing..:crying:
U cant keep it longer.
Open flashtool then select firmware and ok.
Wait till a screen appear.
Now connect ur phone by holiding back button.
Sent from my X8 using Tapatalk 2
bandarigoda123 said:
U cant keep it longer.
Open flashtool then select firmware and ok.
Wait till a screen appear.
Now connect ur phone by holiding back button.
Sent from my X8 using Tapatalk 2
Click to expand...
Click to collapse
But flashtools shows ERROR and flashing aborted and says that for 2011 line devices make sure your device is not in mtp mode....
Flashtools doesn't work that way....
Remember , wana unlock bootloader use stock rom to unlock. Do not use any install custom rom to unlock. Thing u have made a misstake.
kakho55 said:
Remember , wana unlock bootloader use stock rom to unlock. Do not use any install custom rom to unlock. Thing u have made a misstake.
Click to expand...
Click to collapse
So what to do now? Even if i can get my phone back can i unlock the bootloader (manufact. code: 11W33) ????
Help me plzz...
livinglegend9894 said:
So what to do now? Even if i can get my phone back can i unlock the bootloader (manufact. code: 11W33) ????
Help me plzz...
Click to expand...
Click to collapse
DONT UNLOCK!!!!!!!!!! HARD BRICK!
Sent from my E15i using xda premium
Don't try to unlock the Bootloader
If the error getting further, Re-install Windows.
It can't be, 3 weeks ago I had the same problem (MTP) .
I can't even install Apps via flashtool, so I try to connect to flashmode.
It works.
As I said try to Re-install windows.
Good Luck.
hello
i flashed this http://forum.xda-developers.com/showthread.php?t=2378400 however phone turn on but it dont have launcher so i tryed to flash cwm recovery which im not able to do so then i went to pc companion however when i do connect my phone as instructed i dont get greeen led which will confirm and staart of installing software. is any way that i can fix my phone
hope for fast reply
sory for english but im reali desperate n drunk ;/
Make sure you know how to connect in flashmode and that you have the drivers installed.
pccompanion should work with the correct drivers.
hi everyone..
i have problem in Xperia Z which is stuck in boot loop
1st thing is im not able to run the device in flash mode thing is the green led blinks n goes off...
2nd thing is im running windows 10 and im unable to install drivers to run flashtool to flash stock rom via fastboot.
kindly help me with this issue...
shprakash said:
hi everyone..
i have problem in Xperia Z which is stuck in boot loop
1st thing is im not able to run the device in flash mode thing is the green led blinks n goes off...
2nd thing is im running windows 10 and im unable to install drivers to run flashtool to flash stock rom via fastboot.
kindly help me with this issue...
Click to expand...
Click to collapse
Your drivers are not installed properly. In Windows 10 goto the advanced settings and disable the signature verification first. After that install the driver for xperia z. It will work.
still no use after installing drivers for windows 10 and tried flashing stock rom Via flashtool.
but it showing Error while flashing the stock rom.. i think its un-resolvable problem i guess.. no luck...
shprakash said:
still no use after installing drivers for windows 10 and tried flashing stock rom Via flashtool.
but it showing Error while flashing the stock rom.. i think its un-resolvable problem i guess.. no luck...
Click to expand...
Click to collapse
Can you please describe the error?
Ess Arr said:
Can you please describe the error?
Click to expand...
Click to collapse
ILL post the screenshot once wen i reach home..
shprakash said:
still no use after installing drivers for windows 10 and tried flashing stock rom Via flashtool.
but it showing Error while flashing the stock rom.. i think its un-resolvable problem i guess.. no luck...
Click to expand...
Click to collapse
Did you disable driver signature enforcement before installing the drivers?
shprakash said:
hi everyone..
i have problem in Xperia Z which is stuck in boot loop
1st thing is im not able to run the device in flash mode thing is the green led blinks n goes off...
2nd thing is im running windows 10 and im unable to install drivers to run flashtool to flash stock rom via fastboot.
kindly help me with this issue...
Click to expand...
Click to collapse
There are plenty of threads about bootloop.
Also, this should be in Q&A section.
Anyway, make sure to install correct drivers. Ur flashmode is probably just fine.
Mine blinks and goes off also, but flashmode works.
Drivers are installed and driver signature has been disabled.. but finding error while flashing
wen i remove battery and connect Usb cable den the device shows tat it has connected in flash mode nor in fastboot mode... one of the IC is been missing or removed i dont know ill send the Pic after reaching home... i couldn't post the Screen Shot... ill do it today by night....
Pic has been attached below and can see the pointed area where the IC is missing or is it not available... plz let me know..