Hi guys,
I'm sorry for my english...
I had a galaxy S i 9000 with froyo (I suppose).
I was trying tu update my phone with cyanogen or miui but now the phone is always on "NO SERVICE"...there's always no signal and I can't call or send sms or connect to internet by 3g.
I've tried
miui rom stable
miui rom developer
cyanogen nightly
cyanogen stable
but "NO SERVICE" is still here!
Now I'm trying to get back to my previous rom, the problem is that the only information that I have is this screenshot (I can't post it because I'm a new user...) that says "Versione firmware corrente: PDA:JM2 / PHONE:JM1 / CSC:JM2 (TMN)"
I suppose it's froyo but I'm not sure...
Searching with google seems that my galaxy is a portughese version!
Can anyone help me please?
Thanks a lot!
Same thing happened to me, try this for me:
Go into Settings -> About Phone -> Baseband Version
What does it say? I previously had this problem a few times because somehow my Baseband would get screwed up mostly from improper flashing.
I can suggest you flash one of the JVT stock roms and it should come back. That usually fixes it for me.
http://forum.xda-developers.com/showthread.php?t=1289875
Try this one and flash it via odin.
Well on baseband says I9000XXJVO...
Now I'm downloading the ROM you've linked, I hope to resolve!
Thank you!
Hmmm okay, well try and see if it works, hopefully it does
Doesn't work with the ROM you've linked...
I can't understand how to get out from this problem!
Bohoooooo!
Well no way to get out from this problem...
Now I will try every ROM I'm able to find... Am I right?
p.chan81 said:
Hi guys,
I'm sorry for my english...
I had a galaxy S i 9000 with froyo (I suppose).
I was trying tu update my phone with cyanogen or miui but now the phone is always on "NO SERVICE"...there's always no signal and I can't call or send sms or connect to internet by 3g.
I've tried
miui rom stable
miui rom developer
cyanogen nightly
cyanogen stable
but "NO SERVICE" is still here!
Now I'm trying to get back to my previous rom, the problem is that the only information that I have is this screenshot (I can't post it because I'm a new user...) that says "Versione firmware corrente: PDA:JM2 / PHONE:JM1 / CSC:JM2 (TMN)"
I suppose it's froyo but I'm not sure...
Searching with google seems that my galaxy is a portughese version!
Can anyone help me please?
Thanks a lot!
Click to expand...
Click to collapse
I have had this issue a few times coming from Stock roms to CM based roms such as MIUI and Cyanogenmod.
the solution i have found is to:
Install Stock and a decent Kernel.
wipe Data/Factory reset
Wipe Cache
Wipe Dalvik
install CM/MIUI
if still no signal/ and no IMEI shows in your phone settings try flashing a modem from CWM.
you can find a list of flashable Modems here:
http://forum.xda-developers.com/showthread.php?t=1158783
Question?
Do you get "no Signal" when you flash a stock rom (Such as JVT)
STOCK Rom Link: http://forum.xda-developers.com/showthread.php?t=1289875
if you dont get any signal with stock, have you tried flashing an earlier stock rom with an earlier modem?
sammobile.com has an extensive list of stock roms.
from what i can see there is a JM5 rom on there which may be the closest your going to get to your "Phone:JM5" modem.
hope that helps.
I solved the problem flashing a modem!
Thanks so much Danh2009!!!
Thank you everybody!
Related
I just performed a fresh installation of the MIUI RC5 on my i9000 and Have a few problems.
1. My network provider is not being recognized at all. (Even after a couple of restarts)
2. My IMEI is not being displayed. (Even after deleting the efs folder using Root Explorer.)
So please respond immediately as I wish to continue using this ROM.
Thanks in advance
you have to restore the efs backup that you should of made before the installation.
that will restore the IMEI and give you network coverage.
if you cant do that, re-flash the ROM, and if it still doesnt work, you will have to flash back to froyo with pit and repartition and start the whole process again.
Thx a lot dude. Trying it right now. Hope it works *fingers crossed* http://media.xda-developers.com/images/icons/icon11.gif
I tried to install MIUI through Rom manager and now the phone just flashes SAMSUNG but never boots up. I have Infuse-rooted-CWM installed. Please HELP
Thanks
Galnet MIUI v4.0
WIFI Sleep policy does not seem to work. It is set to sleep when screen is turn off, but it never turn off. This is draining up the phone battery. Any one any idea?
chrisanddarla said:
I tried to install MIUI through Rom manager and now the phone just flashes SAMSUNG but never boots up. I have Infuse-rooted-CWM installed. Please HELP
Thanks
Click to expand...
Click to collapse
So you have the Samsung Infuse? Because this is the Galaxy S forums and I don't think Miui is even available on the Infuse so no wonder it isn't working(and the way you installed it isn't the correct procedure anyway). You can probably install a fresh official rom for your phone some how through odin but I'm not familiar with the Infuse. Best to go to the Infuse forums and ask. Hope this helps
galnet v4
hi!
i have problems with my MMS. i cant send my MMS messeage..only recieve..
anybody help ?
Hi guys,
I have just flashed MIUI and my god it looks good
I do have a few problems, I can not pick up any networks (I'm on vodafone uk). When I try to find Network Settings I get: "Call Settings Error Network or Sim card Error."
I hope it is an easy fix I have tried leaving the phone for a few minuets which hasn't helped and I have tried rebooting the phone. When I reboot the phone it goes back I think factory settings as it asks for my Google account information plus Date format.
I used the following guide to install MIUI:
http://www.theandroidsoul.com/galaxy-s-miui-rom
If you think I have a better chance to get this solved on another thread / forum section let me know and I will re-post it
Thanks.
well ideally this thread would be better off under the 'MIUI general, or the MIUI development' but considering you already posted dont worry
anyway it sounds like your IMEI is corrupted, have you checked this by dialing *#06# ??
if its all 0's or a complete different IMEI to is was before hand, just apply the efs backup you should of made before starting the flash.
Well my IMEI is fine, well it gives me a number which I think is correct But I didn't apply a efs back up not sure what that is.
If I want to reinstall MIUI would I need to flash back to 2.2 then flash to MIUI since they keep saying you need to be on 2.2 before you begin the flash.
I was on Darky's 2.2 before I flashed just fancied the change
no, you are on MIUI now right ? so just reflash the ROM again, and make sure you are on the latest kernel too.
if that dont work, try formatting cache / data / datadata / system / dalvik cache, then again, reflash the ROM
Yes I am currently on MIUI.
I used the following:
speedmod-kernel-k13c-500hz.tar
cm7-galaxys-initial-kernel.tar
galaxys-efsbackup.zip
MIUI-RC7-1.4.29.zip
Maybe some of these files conflict with the newer version of MIUI?
they shouldnt conflict.
did you try the steps in my last post ? if so how are things now ?
Cheers for your help. I flashed it back to 2.2 stock then went to MIUI seems to be working now, strange but I am happy
Hi guys,
i have been using Krarvind's Slim ICS 3.5 for about 10 days and I absolutely loved it. I have just updated to 3.6 which caused my phone to bootloop
So, after an hour or so of labouring and trying to work my way back in to it i'm now back on 3.5, but I have absolutely no signal/3G coverage. Wi-Fi works no problems, just no signal!
I went in to the APNs and there is nothing there - I tried to save a new APN and it wont let me - has anyone encountered this before?
Thanks in advance
Haven't experienced this myself but a few things come to mind...
First would be to check if you imei number correct? If not you would need to restore this from a backup.
If IMEI number appears correct then I would try flashing the modem again or a different modem. Modems found here: http://forum.xda-developers.com/showthread.php?t=1158783
If this doesn't work you can try flashing 3.5 base and essentials again.
If that doesn't work search the threads and google or hope someone else can give you an answer. If you don't find any help then as a last resort you can flash a stock rom with Odin although I'm sure there must be an easier way.
wondersteve said:
Hi guys,
i have been using Krarvind's Slim ICS 3.5 for about 10 days and I absolutely loved it. I have just updated to 3.6 which caused my phone to bootloop
So, after an hour or so of labouring and trying to work my way back in to it i'm now back on 3.5, but I have absolutely no signal/3G coverage. Wi-Fi works no problems, just no signal!
I went in to the APNs and there is nothing there - I tried to save a new APN and it wont let me - has anyone encountered this before?
Thanks in advance
Click to expand...
Click to collapse
I've had a similar problem, the updating to 3.6 just went wrong. No bootloop but loads of FC.
My solution has been going back to recovery, do a full wipe (wipe data/restore factory settings) and install 3.6 again. Everything seems to work now but I have to re-install and configure all my apps... :-(
Hope it helps...
Check in About > Phone
Under baseband does it say UNKNOWN ?
this happened to me once, need to reflash the modem. No need for wipes etc
Hi
My Phone details are as follows
Samsung Galaxy S i 9000
firmware version 2.3.6
kernel 2.6.35.7-I9000DDJVB
I am trying intsall the new room by following instructions from here at thedroidcity.com/galaxy-s-gt-i9000-upgrade-to-official-jellybean-4-2-1-firmware
But not able to root . What ever application I used ( gingerbreak, root with restore, CASUAL-PublicBeta4, ROM Manager , super oneclick,InitialCFRootFlasher, mtofail) I am never successful in root my phone. Always the applications go unending with message that files are read only and su can be copied. Even I tried mount system(r/w, r/o). Not much use
Request team member to help me in understanding how to root this phone and install the latest rom ( Hope the jellybean 4.2.1 is the latest )
Thanks
Ishwar
http://www.youtube.com/watch?v=PwHVm90HO1w&list=UUawwqTCK5egDfXdJe3EH0XQ&index=18
http://www.youtube.com/watch?v=2DLySUtI8vo&list=UUawwqTCK5egDfXdJe3EH0XQ&index=15
http://www.youtube.com/watch?v=1RoZU5ZPMS4&list=UUawwqTCK5egDfXdJe3EH0XQ&index=13
http://www.youtube.com/watch?v=iRnH13sRAIc&list=UUawwqTCK5egDfXdJe3EH0XQ&index=9
http://www.youtube.com/watch?v=k_iFf8kyf4I&list=UUawwqTCK5egDfXdJe3EH0XQ&index=7
check out these videos you have to go cm9 ,cm10 ,then jb happy flashing ps theres another two guys below who do great vids some of them are like two years old but they do help
http://www.youtube.com/results?search_query=totallydubbed
http://www.youtube.com/user/HDTechVideo
Thanks a lot. I will see the videos and try rooting
Regards
Ishwar
Hi
Everything went well.thanks. but now i have new issue .It displays error can't connect to network right now. please try again. I tried a lot . but still the problem persists. my phone is unlocked phone and so is my sim
pl help
regards
ishwar
go back to xxjvu then do it all again from there i had same problem and remICS 4.2.2 working for me
Thanks the problem is solved I have upgraded to 4.2.2. HAve a strange problem now.I have contacts updated from my gmail and they all appear in contacts. Same is not accessible while messaging and calling. Any suggestions
Thanks a lot
Regards
Ishwar
TIGER 123 said:
go back to xxjvu then do it all again from there i had same problem and remICS 4.2.2 working for me
Click to expand...
Click to collapse
chech settings of dialer - somewhere there'll be which contacts are shown
you could try wiping your dalvic and cache just and reflash the rom if you dont get any other solution
Thanks a lot. I reflashed ROM and now the problem seems solved. But issue now is that it is taking time to connect to 3g netwrok and I need to struggle a lot a connect( switch on/off airplane mode, installed 3g manager, reset settings). Is there any solution for this
Thanks
Ishwar
TIGER 123 said:
you could try wiping your dalvic and cache just and reflash the rom if you dont get any other solution
Click to expand...
Click to collapse
where is the lockscreen file of a rom?and whats its name?
and the wallpapers of the rom?
Hi all
I have a GT-S6500 , initially it had the Branded Firmware AILD2 Italy TIM , after i installed the Firmware version XXLD2 and the Peter's Rom , everything has gone perfectly for several months until it went in bootloop.
So i installed the last firmware the XXLK2 ITA version , all works expect the wifi , at boot does not start and if i try to activate it says "Error the wifi cannot be activated ".
I reinstalled the last Branded Italy Tim firmware the AIMD3 , but it shows the same error , so i tried with XXLD2 ....same error :crying: , again I tried the XXLD2 and fater the XXLK2 with cyanogemod 10.1 , 10.2 and 11 but nothing changes.
Would you suggest any advice ? I do not Know how to do.:crying: , any info would be grateful .
Thanks Bye Bye
Sorry for my bad english
Any advice? :crying:
go back to stock rom and stock firmware , if you don't have a working wifi then = hardware problem.
keep it simple
ward0 said:
go back to stock rom and stock firmware , if you don't have a working wifi then = hardware problem.
keep it simple
Click to expand...
Click to collapse
Not entirely true on hardware problem. Might be a (config?) mismatch, I have encountered something similar as well.
When I went from stock to TheWhisp' CM11-nightly build.
After you've flashed a build (be it stock or TheWhisp' build), have you tried putting it back to factory settings in recovery yet?
Raan03 said:
Not entirely true on hardware problem. Might be a (config?) mismatch, I have encountered something similar as well.
When I went from stock to TheWhisp' CM11-nightly build.
After you've flashed a build (be it stock or TheWhisp' build), have you tried putting it back to factory settings in recovery yet?
Click to expand...
Click to collapse
Ofc he has to fac reset when he goes back to stock rom ..
I have the same problem with the squadzone OC kernel .. I will get this problem if I use the LK2E firmware series and the latest firmwares .. but It works perfectly with DXLD1 ..
just saying ..
it happens because you updated the kernel, it now has a slightly different version string which doesn't match the wifi module's, and it [the module] gets tainted (= cannot be loaded)
TheWhisp said:
it happens because you updated the kernel, it now has a slightly different version string which doesn't match the wifi module's, and it [the module] gets tainted (= cannot be loaded)
Click to expand...
Click to collapse
Is it possible to edit the Stockrom to be match with the kernel ??
you also need to updated the wifi module which is named ar6000.ko on gingerbread
TheWhisp said:
you also need to updated the wifi module which is named ar6000.ko on gingerbread
Click to expand...
Click to collapse
okay .. thank !! I'll try ... if I can :silly: ...
I only do if this happened to mine i turn off my phone then reboot then turn the wifi on