Database Develop

[Q] Milestone Froyo 2.2.1 stuck on 550MHz and can not be overclocked

Hi All,
I have a rooted Milestone with Middle East stock ROM running FROYO 2.2.1... I want to overclock the beast.
whenever i run the milestone overclock and choose a different frequecy than 550MHz (I tried various combinations of frequencies and Vsels) and i hit apply, it always reboots and does not work..... am i doing something wrong?
Do i need to use any other app? setCPU and other apps also have a max of 550MHz.
Hady

I have Central Europe GOT 2.2.1 and also had similar problems. I rooted my phone again, using Androidiani, and then reinstalled Milestone Overclock, it helped.

What is androidiani? I rooted using Super one Click. Which version of Milestone Overclock are you using?

hadyhosny said:
Hi All,
I have a rooted Milestone with Middle East stock ROM running FROYO 2.2.1... I want to overclock the beast.
whenever i run the milestone overclock and choose a different frequecy than 550MHz (I tried various combinations of frequencies and Vsels) and i hit apply, it always reboots and does not work..... am i doing something wrong?
Do i need to use any other app? setCPU and other apps also have a max of 550MHz.
Hady
Click to expand...
Click to collapse
Which 2.2.1 stock are you running? There is no official 2.2.1 released as yet. You can overclock using Androidiani OR which is available here.
IF you using the latest leak ( APAC ), Milestone overclock doesn't work.

system/bin/mot_boot_mode
longpress "Open in Text Editor"
Code:
#
insmod /data/data/pt.com.darksun.milestoneoverclock/files/overclock.ko
echo 68 > /proc/overclock/max_vsel
echo 800000 > /proc/overclock/max_rate
change the vsel and maxrate to these terms

my solution
hello all
unistall or update milestone overclock failed on my devices setup after a few trys i found another solution
i run my xt-720 with dexter`s milestone2.2.1 xt720 remake v1.3 bugfixv3 and till yet found no more bugs without milestone overclock
if you type milestone overclock in market search there are 6 apps,cpu master (free) is one of them with this i fixed my problem that the cpu is set on 550 mhz at startup!
Just download it!
Open the old milestone overclock set cpu on what you want (i did 1ghz).
After this open cpu master (free) set my cpu min 1ghz max 1ghz,hook in set on boot box and tada after startup it sets cpu to 1ghz
,for more battery life take a lower number a the min value
precaution hook in set on boot in milestone overclock,dont know if its relevant XD
mfg jens
ps:hope this can help some people and sry for my bad english

[q] gingerdx overclocking

i installed gdx v009 and overclocked it and set the setcpu to 729 Mhz - 122 Mhz. i'm having some trouble sometimes my phone just automatically reboot by it self... is there a way to fix this? or should i uninstall overclock and run it on stock ram. have anyone of you tried this kind of setup? any answers/reply or comments are welcome. please. thanks in advance.

Try lowering your Overclock.
I've heard that some people had reboot problems with OC (but not only in this ROM).
Mine is 122-691Mhz with GingerDx.008 and its okay.

BITOx said:
Try lowering your Overclock.
I've heard that some people had reboot problems with OC (but not only in this ROM).
Mine is 122-691Mhz with GingerDx.008 and its okay.
Click to expand...
Click to collapse
Realy? What seems to be the problem on my unit.... maybe i should set my setcpu setting the same way you did... how about supercharger script have you tried? I brick my phone twice trying that supercharger.

Nope. I didn't try to use supercharger.
I've read that when we want to OC, we should try the different CPU speeds gradually.
Increase a bit and then see if the phone handles it... then increase a bit more... when the reboots or other problems start, we know which frequence we should use.
But the frequence is not the same for every CPUs... The phone is the same, but not every CPUs handle the same... We can be lucky and get it to 800Mhz without problems... but not everyone has that lucky.

edward091810 said:
i installed gdx v009 and overclocked it and set the setcpu to 729 Mhz - 122 Mhz. i'm having some trouble sometimes my phone just automatically reboot by it self... is there a way to fix this? or should i uninstall overclock and run it on stock ram. have anyone of you tried this kind of setup? any answers/reply or comments are welcome. please. thanks in advance.
Click to expand...
Click to collapse
i am using ginger dx 009v and overlocked upto 729mhz but doesn't experienced any problem

mabdullah007 said:
i am using ginger dx 009v and overlocked upto 729mhz but doesn't experienced any problem
Click to expand...
Click to collapse
Good for you, now i reduce the speed and set it to 729 mhz still under observation i hope this will fix the problem...
Sent from my X8 using XDA App

Hi all,
any idea why I get no options to set min. and max. CPU frequencies in CPU settings? I am using GingerDX v011 and had the same problem in v010.
I can open the "Max CPU frequency" option, but it is empty with no available frequencies to choose...
Thank you

For using something exactly like supercharger, use the stuff in this thread: http://forum.xda-developers.com/showthread.php?t=1212396&page=14
Each phone can OC to a different max frequency, for example I can't OC to 825 MHz but I know some people can.

steevensk said:
Hi all,
any idea why I get no options to set min. and max. CPU frequencies in CPU settings? I am using GingerDX v011 and had the same problem in v010.
I can open the "Max CPU frequency" option, but it is empty with no available frequencies to choose...
Thank you
Click to expand...
Click to collapse
I believe GingerDx does not ship with the X8Overclock module...

Hello:
I wanna know: is it possible to do overclock in gingerDX-v011 ?
I found a option but they are blocked

yes it is possible but you need to download X8overclock v004. you will find this in DX's signature, just click the link read the guide download and stick it on your phone where he tell's you to. then go back to W/E it is you use to OC then the option's aint blocked anymore.
Here is the link http://forum.xda-developers.com/showthread.php?t=1188486 click that go to bottom of one of dx's post's in his signature click the X8overclock v004 link. FOLLOW instruction's. DONE
Hope i help'd
If so please Click " THANKS "

Im on gingerdx v018 with undervolt modules(stock kernel), when I try to overclock my phone, it become very unstable(very laggy).. Do I have to remove the underclock module? If so can I just remove the module from the module folder.. thanks in advance!

As far as I know undervolt module causes phone instability when it's overclocked, try to remove that module (undervolt) and see what will happen. You can remove just by removing it from module folder and (I'm not sure but) you have to also remove line from hw_config which contains that module.

I am also using GingerDX overclocked at 710Mhz with undervolt but no problem for me so far

getting hangs while overclocked?

I tried overclocking my phone with galaxian and semaphore kernels. I overclocked my phome to 1.2ghz and tried other frequency not lower than than 1ghz but I keep on getting hangs when waking up the phone to unlock and sometimes while using the phone. how do I fix thix problem? I'm on darkys rom 10.2 extreme edition.
Sent from my GT-I9000 via XDA Premium App.
Rom: Darkys Rom 10.2

Galaxian is on 1.2 ghz on default only then how did you overclocked it ! Try semaphore kernel its better, believe me i have used galaxian for 2 weeks on jetpack rom and got bit of lags and quadrant score near 2600 only while on semaphore I get 3000 on 1.2ghz after overclocking using tegrak overclock app.
Sent from my sgs
kernel: galaxian
Rom: jetpack

i used both tegrak and set CPU apps to overclock it. when i used the tegrak, i clicked on the load module then clicked on CPU max frequency, chose the 1.2ghz, then says watching stability the the watcher stopped working or the countdown stops at 298. chose another frequency it did the same. i tried it until the countdown works, and it works but i get hangs sometimes. would you be good enough to give me all info to overclock it manually in the optimize menu in the tegrak app?? thanks

anyone have fix for this?

yes, clean your phone and install Tornado.

I was using tegrak. But my suggestion is dont use oc. Bcs OC is always risk and we are not getting any performance increase except the benchmark score.

First try wiping cache/dalvik cache and use Ultimate Kernel Cleaning Script - 2.0 via CWM. If that doesnt improve the lags better do a full install via odin. Its better than a factory reset co's u will lose all ue data any way. Pls do back up all of ur apps and personal data. Try using mybackup root or titanium backup from market.

i think you should overvoltage on 1200mhz
you can use tegark overclock ultimate or voltage control ultimate

[Q] is there a rom that can be stable overclock on the 806 frequency?

I use gingerdx v12 and can sometimes restart itself (unstable)

Look the best of your processor oc.
If you get reboot at 806, it mean your device can't oc to 806
If you bestest overclock, i mean like your best oc is 768, that mean you only can oc from 0 Mhz (??) -- > 768 Mhz
Not connect with your rom!
Hit thanks if i helped you!
Edit: Also wrong thread section, it must at Q&A

chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Post questions in q&a section.
Each phone has different maximum overclock frequency. The rom doesn't matter, the phone does.

processor might be working harder,i'm affraid overclocking my phone in 800mhz..
i think oc in 710 should be nice and stable but batery drains more faster

chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Although there might be a relationship between ROM and Overclock Stability, repeated test on various ROMS still gets me the same OC max of 748Mhz.
Please note that overclockability of the CPU depends on the CPU. Not all CPU's of the same make are equal. the design of our X8 called for a 600Mhz CPU clock, so it goes that it will be and always be stable at 600 Mhz. However go more than that and you have no guarantee at which Max Clock you will get. If you could go to 800 without FC and/or reboots then consider yourself very lucky.

for me.. i can't go far.. im using GingerCruzt.. and it has an option on overclocking.. once i checked the overclocked my phone reboots always..

I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium

OC 806Mhz
Nxmate said:
I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium
Click to expand...
Click to collapse
I can confirm OC @806Mhz with GC OC module (instead of DX's), running on MiniCM7 2.0.7...stable.

hmm when i using gingerDX v11, i tried overclock to 806Mhz and it stable for a while, but in 5 minutes i think, my device get reboot...
all roms can stable at 787Mhz in my device.. no reboot no force close... just stable and smooth, but battery drain

Live OC issue on Semaphore

Hi guys i have a problem with semaphore kernel. I use the 2.5.0 and now the 2.6.0 and both have the same problem if i oc to 120% my phone crash and reboot to CWM rocovery if i start again it crashes again. But this issue is not happening everytime i use 120% it happen by chance. So what am i doing wrong ? or is that a known issue

It's possible your CPU can't handle that OC without increasing the voltage.

oh ok i thought i dont need to chance the voltage if i want to oc but thanks... but with devil kernel i dont have the problem even on 1.4 ghz
Sent from my GT-I9000 using xda app-developers app

Did you try to put te OC step by step? I mean.. 101% then 102% etc.. to see at which point crashes

Rokostar said:
Hi guys i have a problem with semaphore kernel. I use the 2.5.0 and now the 2.6.0 and both have the same problem if i oc to 120% my phone crash and reboot to CWM rocovery if i start again it crashes again. But this issue is not happening everytime i use 120% it happen by chance. So what am i doing wrong ? or is that a known issue
Click to expand...
Click to collapse
about the "known issue" part, I had the same problem (CM10 nightlies and semaphore 2.5.0 and then 2.6.0) with 120%OC, but when i used only 110% OC it worked properly.
Devil could OC more but with Devil my phone was slower so i swiched back to sema
Try lower the OC level if it fits for you

hey ok thank you i musst say that i dont need oc. i only need it in antutu and other benchmark... an other question to sema kernel in the version 2.6.0 touch wake dont work good i read that 2.6.2 solve this but it have an other issue with aroma in cwm so what can i do
Sent from my GT-I9000 using xda app-developers app