Friend wanted me to mod his phone and i did open the bootloader to flash custom kernel but when i turned the phone off to flash kernel the phone did`t turn on to flash mode. And yeahh now it`s broken. Any suggestions how to fix it? I opened the bootloader with unlock package from fxp rom zip. And the phone had stock rom.
Related
Hi guys,
I'm not sure this is a section or not sorry for that.
I Can't flash anything with Flashtool. Even 4.2.0. It says Unplug your phone, enable usb debugging and unknown sources. I did it already and its still not working.
I searched entire web for this problem, tried million things but still samething.
My bootloader is unlocked and phone is rooted. After i unlocked my bootloader.
Phone acted really weird. Like Home button not working, camera not working etc.
So i flashed CM7 kernel with fastboot and CM7 in recovery menu. Not it's good.
But i want to use SE Stock ROM. But i can't flash it with Flashtool.
So is there any .zip file for Stock ROM that i can flash it in Recovery Mode ?
Or, Is there any other way to flash Stock ROM without using Flashtool.
Thank you for reading.
Best regards.
I've flashed Stock SE .42 with Wotan Server.
Thread can be deleted.
Thank you
Hi i am using x8 and i unlocked the bootlaoder put thealfs kernel butafter that stock rom cant load and icant upload my gingerdx rom any ideas how to fix ?
One more thing after i unlocked the Bl before i put alfs kernel i had no signal
Relock your bootloader and try unlocking again with Setool2. That should give you signal back but not sure as I can't really remember .
You should have flashed a custom before flashing a kernel. Go into recovery by pressing back button on logo, go down to mounts and storage then mount USB. Then copy the rom over.
Sent from my XPERIA X8 using xda premium
new problem
new problem now restored the stock kernel uploaded the gingerdx than i put the new kernel (alfs08 no_fps_cap) and its stuck on infinity loop and GingerDX logo ..... I tried to wipe the cache from xrecovery but still the same
lol
NIMBAH said:
Relock your bootloader and try unlocking again with Setool2. That should give you signal back but not sure as I can't really remember .
You should have flashed a custom before flashing a kernel. Go into recovery by pressing back button on logo, go down to mounts and storage then mount USB. Then copy the rom over.
Sent from my XPERIA X8 using xda premium
Click to expand...
Click to collapse
I have no intentions to pay for this tool setool2 moreover i uplaoded the kernel and the rom successfully but the problem is no taht i am stuck at infinity loop on GingerDX logo... :X
I will be really glad if someone can help i managed to put new kernel , rom and now i am stuck with infinity boot loop :X:X:X:
Try install back the stock 2.1 eclair with stock kernel and do everything again, use SEUS.
new problem now i restored the bootloader relocked it now ito nly vibrates and nothing happens it tursn off and i can enter in flash mode only. But i cant restore stock kernel icant do anything after i relocked the bootloader
EDIT:
I restored flash kernel but i want new kernel adn when i unlock bootloader there is nos ignal :X:X:
That's not a surprise. Since Alfs has a built-in recovery You should enter to it, then do wipe data / factory reset and then flash ROM using install zip from sd card. Because You had installed ROM before and didn't wipe data - that's why it stuck and it's bootlooping.
Bolussimo said:
That's not a surprise. Since Alfs has a built-in recovery You should enter to it, then do wipe data / factory reset and then flash ROM using install zip from sd card. Because You had installed ROM before and didn't wipe data - that's why it stuck and it's bootlooping.
Click to expand...
Click to collapse
New problem mate when i unlock the bootloader i have no signal i put alfs kernel gingerdx runs normally but no signal . I relock the bootloader and than the phone cant boot and i must restore the old kernel:X
Did You check what type of Simlock Certificate is in Your x8 using s1tool? Cause there shouldn't be any problem with signal when it's SEMC... I suppose it's "not recognized simlock certificate" in Your case.
did you try unlock with flashtools? i read somewhere that some people with your same problem works fine with flashtools
I got unlock key from my operator and instructions to put in another operator's SIM. I should be asked for unlock key when I turn it on.
But nothing happens when I do that. I guess it is because I don't have original ROM.
I have MiniCM7-2.2.0 and nAa-11 kernel.
Any way to do this without going back to original ROM?
If I have to go backe do I need to revert back ROM and kernel or just one of those?
thank you!
If you try to return, you should flash both stock ROM and kernel (because the stock ROM doesn't work on custom kernel).
go to CWM make backup,on your pc repair phone with PCC than you should be able to unlock your phone.if you successed flash nAa kernel again,go to CWM and restore your backup
Hi! Some months ago I flashed a kernel from here in XDA. The kernel was from Doomlord, to install CWM Recovery. But the device came into infinite boot. Then to solve it I flashed a stock rom (12.0.A.2.254) to see if the problem was solved..
Solved problem, the device came to normal (at least the infinite loop was solved).
But after flashing the Doomlord kernel, even flashing a stock rom, when I receive a message and visualize it, the LED stays turned on, and off only when rebooting. When I reboot the device, date/time are lost. The date in the top bar is updated only if I turn off the screen and then turn on again.
I tried reblock bootloader and repair from PC Companion. I tried flash the stock 4.3. I tried flash only the stock kernel. But nothing solves the problem.
Someone can help me?
Sorry for my english, I'm brazilian
You CANNOT relock bootloader while in custom kernel.
Unlock bootloader again, go in flashtool and flash the stock ftf, doom kernel isn't stable yet, use only stock or try another kernel...
lucasgta95 said:
You CANNOT relock bootloader while in custom kernel.
Unlock bootloader again, go in flashtool and flash the stock ftf, doom kernel isn't stable yet, use only stock or try another kernel...
Click to expand...
Click to collapse
Do you have the link to some kernel .elf that I can try to flash? If I unlock BL again and flash some stock .elf the problem could be solved?
Yes, but I recommend to flash a whole stock rom ftf after unlocking bl...
I passed through this situation too
lucasgta95 said:
Yes, but I recommend to flash a whole stock rom ftf after unlocking bl...
I passed through this situation too
Click to expand...
Click to collapse
I unlocked BL and flashed a stock (12.1.A.1.207). The problem continues. I tried too flash a stock 12.0.A.2.254 after unlock BL. In 4.1 the only problem is the date that is lost when rebooting. But flashing 4.3 stock all the previous problems continues. After receive messages, even if I read it, LED still on until I reboot the device. Date is lost after reboot, bla bla..
Maybe the problem is not the kernel that I flashed some months ago. What do you think? Some idea?
Guy, try this rom, and say if the problem continues
http://forum.xda-developers.com/xpe...nality-update-xperia-performance-max-t2895506
Unlock bootloader to use this rom
It is a great rom
If you don't like custom roms you can try the stock I'm using
http://forum.xda-developers.com/xperia-sp/general/ftf-12-1-1-207-generic-au-xperia-sp-t2856432
hi guys ,so this is the story:starting with stock xxx.1.A.1.2xx (cant remember)
1.i rooted withe towelroot............ sucess
2:then unlocked BL with sony's guide ............success
3.installed recovery 'CWM_SP_4.4.1' ,every thing was normal until i flashed VANIR rom,the rom didn't flash
i waited 20min the turned the phone off
tryed again nothing
tryed with another kernel and recovery and same happened
finally i tryed another rom AOSPA kitkat and the same boot loops
Q:did i damage anything by turning phone off during the install
Q:What to do!!
taha1994 said:
hi guys ,so this is the story:starting with stock xxx.1.A.1.2xx (cant remember)
Q:did i damage anything by turning phone off during the install
Q:What to do!!
Click to expand...
Click to collapse
1.You actually did!:laugh:
2.Flash stock ftf and start over
Btw I dont think you have successfully unlocked your bootloader. Check it. Use flashtools it is million times easier.
i think you'r right
i flashed a stock signed rom (using TWRP) and it is back on
i will try flashtool unlocking
THANKS