Im using Alfs V5 Kernel...When i try to install Stornmix 2.1.0 (Rom) it says compactible baseband not found.. upgrade to Baseband (M76XX-TSNCJOLYM-53404015)..
I cant repair using Seus or update service..they say Software not found..
i got bootloop flashing stock kernel..what to do??????
Using Gc 8.4(modded) right now..
Flash back to stock kernel/baseband through Flashtool. Same goes for restoring from a boot-loop (at the white SE logo or pre-bootanim crash) ... Flashtool. <-- Search the forum ... there are several guides posted.
If you have a boot-loop during the boot-anim you forgot to full-wipe (after switching from one ROM to the other).
Related
hello,
I'm trying to flash ics on my friend's sgs i9000(2.3.3), but some probs occured.
I flashed the rc3.1 aosc icssgs rom (tried cm9 teamhacksung too) and it worked great for about 30 mins and then a random reboot occured. since then they occured randomly when i turned off screen, turned it on, or even just on idle...
I also had no service which i didn't know how to fix (tried different modem it worked but not for long). i'm in israel.
Eventually I odin flashed the stock orange rom back and semaphore 2.1.1 gb kernel in order to to do a nandroid restore.
well I wanted to ask if any of these might happen on the doc's master ics rom v3.1.
and how do I restore the service (on my defy i have the defy baseband switcher) as the service menues don't apear to work on these ics build(is there any way of preserving the baseband/modem from the stock rom?)
Hi,your SGS has the original IMEI?
Try flashing this Stock rom I9000XXJVU 2.3.6 with Odin.
The Guide:w.w.w.theandroidsoul(.)com/xxjvu/
and flash this kernel.Here is the guide for this.
w.w.w.theandroidsoul(.)com/root-xxjvu-firmware/
After this go to recovery and flash the RC3.1 or the newer RC4.1.
Favorit5503 said:
Hi,your SGS has the original IMEI?
Try flashing this Stock rom I9000XXJVU 2.3.6 with Odin.
The Guide:w.w.w.theandroidsoul(.)com/xxjvu/
and flash this kernel.Here is the guide for this.
w.w.w.theandroidsoul(.)com/root-xxjvu-firmware/
After this go to recovery and flash the RC3.1 or the newer RC4.1.
Click to expand...
Click to collapse
thank you but now it works kinda fine on cm 7.2(now on ics it is fine too)... it still takes time till it gets signal but it gets it and stays... thank you...
I have a x8 unlocked bootloader and rooted .
I have already download the stock kernel .ftf file and flashed it using flashtool for my xperia x8 which is running xperience walkman mod 1.0 but it was no luck ... i tried to flash stock rom first but cwm would not flash it
i did tried to flash the kernel but i boot up it will just stuck at the sony ericsson logo and i am unable to enter recovery ..
Can anyone help me?
Flash stock kernel and use seus
Sent from my X8 using XDA
To the best of my knowledge, you can flash kernels only via flashtool. CWM won't help. And the kernel .ftf file must have a loader.sin in addition to a kernel.sin when viewed via flashtool.
I remember a day I flashed my X8 37 times within 24hours! At times, it would get temperamental & fail to boot beyond the SE logo screen for reasons it alone knows. Cheer up. And get flashing!
Hmmm... i dont want to use SEUS because by then i would have to reroot and even unlock bootloader again i tried couple of times to flash the stock kernel but my phone just stuck at the se logo
superng888 said:
Hmmm... i dont want to use SEUS because by then i would have to reroot and even unlock bootloader again i tried couple of times to flash the stock kernel but my phone just stuck at the se logo
Click to expand...
Click to collapse
Which kernel are you tried to flash? You can use flashtool to flash your kernel, and install ROM with CWM! If you are flashing aNa kernel, CWM is already built-in. If you still struck at SE logo, mean your kernel is not flash yet.
saintckk said:
Which kernel are you tried to flash? You can use flashtool to flash your kernel, and install ROM with CWM! If you are flashing aNa kernel, CWM is already built-in. If you still struck at SE logo, mean your kernel is not flash yet.
Click to expand...
Click to collapse
i am trying to flash se stock kernel
thx.......................................
saintckk said:
Which kernel are you tried to flash? You can use flashtool to flash your kernel, and install ROM with CWM! If you are flashing aNa kernel, CWM is already built-in. If you still struck at SE logo, mean your kernel is not flash yet.
Click to expand...
Click to collapse
Well, there's actually still ADB but it carries a certain amount of risk. With flashtool, most of that is obviated. If you need more information, scout the Android Development section for related topics.
Search in the Flashtool post the list of official firmwares, and flash one of these (yes, only that )
If the links are dead, send me a PM and I will give you the ftf that I have
I do have the .ftf file and flashed it.. but my phone will just stuck there
Hi. I am on GingerDX v024 now and i wanted to flash Alfs 8a kernel, and when I did, I stuck at infinite bootloop (Alfs logo>reset>alfs logo...and so on) I flashed then older 8 version, and even stock kernel but it didn't help. Only way to fix it was by flashing it back to stock 2.1 and again install GDX v024. So now there is a question: my baseband is 006, is it the problem that I'm stuck on bootloop after installing a kernel for this ROM? Thanks in advance!
Sent from my X8 using Tapatalk
You surely need a newest baseband xxx015. You can update your baseband by PC companion.
Then reinstall the rom, full wipe then flash alfs.
Thanks for reply Can I do this via Flashtool (because Companion doesn't work)? And which .ftf file should I choose? And can I do this on current GDX v024 or flash it back to stock 2.1??
Yes, you can use FlashTool. Download the ftf file from here. Isn't necessary back to stock 2.1
So if I have E15i, then I should go for "E15i Baseband 015", right? I'd rather ask ten times, than crying after bricked phone
Sent from my X8 using Tapatalk
Yes, you're right
Hi All,
My galaxy note is stuck on the Samsung logo and just hangs there.
some info on what I did.
My phone has been rooted (this has been done a while now still on stock rom)
I put phone back to factory settings (as wanted to start fresh) all was fine still rooted
I got a pop-up message about a update so I installed the update phone rebooted
Then I got another message about a update think it was kernel file update
phone rebooted
Then I got another message about android 4 so installed this phone rebooted and now it just hangs when it gets to the Samsung logo.
I can get into recovery mode.
Any ideas what I should do?
I have done lots of searches but did not want to make things worse (if possible)
Should I try and flash ICS using Odin3 v1.85?
Or should I just send phone back to Samsung?
Flash a stock Gingerbread Rom using PC Odin.Then,if you want you can update to official ICS without rooting or root GB and flash custom ROMS.
Dont wipe anything from the default kernel CWM, see if your storage can connect to PC, if yes then copy CF kernel 5.6 lq3 and Abyss kernel 4.2 and flash Abyss kernel first and go to advance reboot recovery, then do full wipe, then flash CF kernel 5.6 lq3
Hi Thanks for the replies
I checked and I can go into recovery and access the sd card
I could not find the kernels you mentioned do you have a link to them
also when I have flashed both kernels will I then have to flash a rom?
maybe the ginger bread one like NoRmAlY_CrAzY said
I found this one that am downloading
N7000XXKKA ------ 2.3.6 2011 November------- N7000CPWKK3 -----------United Kingdom (Carphone Warehouse)
Should I flash that?
-------
ok I flashed the ginger bread rom using rom Odin and its working i'll have to root again now i'll have to go read some threads about updating to ICS
Thanks Angie
Does anyone have the XX015 baseband flashable thru flashtool? I have found some but with dead links.
Moreover, i got stucked on nAa 14 animation, (unlocked bootloader, reflashed stock, reflashed naa kernel, etc but nothing worked)
I was thinking this was someting to do with the baseband since when i get backed to stock (flashed thru flashtool) its still xx006
Am I right? or any suggestion. im not familiar with the phone so i need some help. :fingers-crossed:
baseband
Blake Blader said:
Does anyone have the XX015 baseband flashable thru flashtool? I have found some but with dead links.
Moreover, i got stucked on nAa 14 animation, (unlocked bootloader, reflashed stock, reflashed naa kernel, etc but nothing worked)
I was thinking this was someting to do with the baseband since when i get backed to stock (flashed thru flashtool) its still xx006
Am I right? or any suggestion. im not familiar with the phone so i need some help. :fingers-crossed:
Click to expand...
Click to collapse
Here is the baseband link : http://www.mediafire.com/download/672rcbcpxn1wq9g/E15i_X8i_2.1.1.A.0.6_Baseband_015.7z :good: