Hi. I am on GingerDX v024 now and i wanted to flash Alfs 8a kernel, and when I did, I stuck at infinite bootloop (Alfs logo>reset>alfs logo...and so on) I flashed then older 8 version, and even stock kernel but it didn't help. Only way to fix it was by flashing it back to stock 2.1 and again install GDX v024. So now there is a question: my baseband is 006, is it the problem that I'm stuck on bootloop after installing a kernel for this ROM? Thanks in advance!
Sent from my X8 using Tapatalk
You surely need a newest baseband xxx015. You can update your baseband by PC companion.
Then reinstall the rom, full wipe then flash alfs.
Thanks for reply Can I do this via Flashtool (because Companion doesn't work)? And which .ftf file should I choose? And can I do this on current GDX v024 or flash it back to stock 2.1??
Yes, you can use FlashTool. Download the ftf file from here. Isn't necessary back to stock 2.1
So if I have E15i, then I should go for "E15i Baseband 015", right? I'd rather ask ten times, than crying after bricked phone
Sent from my X8 using Tapatalk
Yes, you're right
Related
Im using Alfs V5 Kernel...When i try to install Stornmix 2.1.0 (Rom) it says compactible baseband not found.. upgrade to Baseband (M76XX-TSNCJOLYM-53404015)..
I cant repair using Seus or update service..they say Software not found..
i got bootloop flashing stock kernel..what to do??????
Using Gc 8.4(modded) right now..
Flash back to stock kernel/baseband through Flashtool. Same goes for restoring from a boot-loop (at the white SE logo or pre-bootanim crash) ... Flashtool. <-- Search the forum ... there are several guides posted.
If you have a boot-loop during the boot-anim you forgot to full-wipe (after switching from one ROM to the other).
I have a x8 unlocked bootloader and rooted .
I have already download the stock kernel .ftf file and flashed it using flashtool for my xperia x8 which is running xperience walkman mod 1.0 but it was no luck ... i tried to flash stock rom first but cwm would not flash it
i did tried to flash the kernel but i boot up it will just stuck at the sony ericsson logo and i am unable to enter recovery ..
Can anyone help me?
Flash stock kernel and use seus
Sent from my X8 using XDA
To the best of my knowledge, you can flash kernels only via flashtool. CWM won't help. And the kernel .ftf file must have a loader.sin in addition to a kernel.sin when viewed via flashtool.
I remember a day I flashed my X8 37 times within 24hours! At times, it would get temperamental & fail to boot beyond the SE logo screen for reasons it alone knows. Cheer up. And get flashing!
Hmmm... i dont want to use SEUS because by then i would have to reroot and even unlock bootloader again i tried couple of times to flash the stock kernel but my phone just stuck at the se logo
superng888 said:
Hmmm... i dont want to use SEUS because by then i would have to reroot and even unlock bootloader again i tried couple of times to flash the stock kernel but my phone just stuck at the se logo
Click to expand...
Click to collapse
Which kernel are you tried to flash? You can use flashtool to flash your kernel, and install ROM with CWM! If you are flashing aNa kernel, CWM is already built-in. If you still struck at SE logo, mean your kernel is not flash yet.
saintckk said:
Which kernel are you tried to flash? You can use flashtool to flash your kernel, and install ROM with CWM! If you are flashing aNa kernel, CWM is already built-in. If you still struck at SE logo, mean your kernel is not flash yet.
Click to expand...
Click to collapse
i am trying to flash se stock kernel
thx.......................................
saintckk said:
Which kernel are you tried to flash? You can use flashtool to flash your kernel, and install ROM with CWM! If you are flashing aNa kernel, CWM is already built-in. If you still struck at SE logo, mean your kernel is not flash yet.
Click to expand...
Click to collapse
Well, there's actually still ADB but it carries a certain amount of risk. With flashtool, most of that is obviated. If you need more information, scout the Android Development section for related topics.
Search in the Flashtool post the list of official firmwares, and flash one of these (yes, only that )
If the links are dead, send me a PM and I will give you the ftf that I have
I do have the .ftf file and flashed it.. but my phone will just stuck there
Hello guys,
So I just downloaded the leaked official JB ROM for my N7000 and flashed it successfully via Odin (I came from the latest CM10 Nightly build).
After that I wanted to flash the latest Hydracore to have my phone rooted, but apparently it comes in .zip format only.
Since I'm not rooted and I don't have CWM now, how can I get to flash Hydracore via PC Odin?
Hope someone has the answer for this, as the internet is just full of bullocks all websites are describing the same non working procedure....
Thanks all
//M
Sent from my GT-P6800 using xda app-developers app
latest jb leak does not work with hydracore. If you want to root use philz kernel zip file and install using stock recovery.
Sent from my GT-N7000 using xda premium
Thanks much
will do so... I already flashed Hydracore and now I'm stuck @ Samsung's logo
Hopefully I won't face such issues again
Sent from my GT-P6800 using xda app-developers app
Well, I've downloaded both v3.65 .zip files (XXLSA and XXLS7) and tried flashing them through CWM which was already on the device.
After rebooting either, it goes into a black screen after the initial boot screen (Galaxy Note GT-N7000).
Bear in mind I had already flashed Hydracore before that...
Any helpers as to what I'm doing wrong?
Should I reflash the stock ROM via PC Odin then flash Philz kernel via stock recovery?
Thanks in advance
P.S. I know I messed up big time
As what my friend nokia said. Hydracore is not compatible with jb leaks rom.
I m not so sure which kernel u r now, since u stuck at boot logo.
And I don't want to decide too fast that u have bricked ur phone.
Just try to flash the firmware again through odin. If u can, and can boot up, try to flash philz kernel from stock recovery.
Sent from my GT-N7105, at the corner of this rounded earth.
antique_sonic said:
As what my friend nokia said. Hydracore is not compatible with jb leaks rom.
I m not so sure which kernel u r now, since u stuck at boot logo.
And I don't want to decide too fast that u have bricked ur phone.
Just try to flash the firmware again through odin. If u can, and can boot up, try to flash philz kernel from stock recovery.
Sent from my GT-N7105, at the corner of this rounded earth.
Click to expand...
Click to collapse
That's what I'm thinking and doing now, wish me luck
I've also downloaded xxlsa to have 4.1.2 .. according to online tutorials I should flash cf-root via odin, then flash the rom via CWM .. any thoughts?
[Update - 1] phone is ok, re-flashed the stock firmware via PC Odin and it is working now, no problem! tried flashing cf-root, got stuck at the yellow triangle screen and nothing happens ... so I reflashed the stock rom again.
will try now to flash cf-root then boot into recovery, i just might be lucky
[Update - 2] upgraded to JB 4.1.2 successfully and rooted!
So which kernel are you using? and which Jelly bean?
I have X8 with 2.6.29.6- nAA -ics-04 kernel and MiniCM9-3.0.4-shakira installed.
Phone is turning off by itself and it's really slow so I would like to install stock rom.
I tried by PC Companion but it doesn't recognize device.
Can anyone help me with step by step instructions?
Can I just update with SEUS? I read somewhere that I should flash stock kernel first but I can't find how to.
I tried to search thread for this, but there's nothing for beginners.
Now I really NEED HELP PLEASE!
I copied Ginger DX rom on my SD card and install it, since thread said it runs with stock kernel and nAa kernel. (On other thread someone wrote that I need rom that supports both stock and nAa kernel for easier stock kernel install.)
Now my phone only shows Sony Ericsson start screen and that's it.I tried many threads for bricked phones but all links are broke and the ones I managed to download are not working.
So now I have W8 and X8 (E16&E15) Stock Kernel and X8i_2.1.1.A.0.6_Baseband_015, I also tried Xperia X8 (E15)_2.1 (2.1.1.A.0.6)_Greek (by Leajian) but all of them shows only Sony Ericsson start screen.
Also, when I connect to SEUS it says I already have latest software and I can't connect to PC Companion since I can't turn the phone on.
Please someone help me, I've been up with this all night and need my phone in the morning.
are you on stock kernel already? simply flash the stock ROM via flashtool. do NOT flash the kernel. then reboot. you need to have pcc installed too. and install the drivers in flashtool's /drivers folder.
edit: you need the stock rom .ftf file. not the baseband and kernel.
[cAs]
Does anyone have the XX015 baseband flashable thru flashtool? I have found some but with dead links.
Moreover, i got stucked on nAa 14 animation, (unlocked bootloader, reflashed stock, reflashed naa kernel, etc but nothing worked)
I was thinking this was someting to do with the baseband since when i get backed to stock (flashed thru flashtool) its still xx006
Am I right? or any suggestion. im not familiar with the phone so i need some help. :fingers-crossed:
baseband
Blake Blader said:
Does anyone have the XX015 baseband flashable thru flashtool? I have found some but with dead links.
Moreover, i got stucked on nAa 14 animation, (unlocked bootloader, reflashed stock, reflashed naa kernel, etc but nothing worked)
I was thinking this was someting to do with the baseband since when i get backed to stock (flashed thru flashtool) its still xx006
Am I right? or any suggestion. im not familiar with the phone so i need some help. :fingers-crossed:
Click to expand...
Click to collapse
Here is the baseband link : http://www.mediafire.com/download/672rcbcpxn1wq9g/E15i_X8i_2.1.1.A.0.6_Baseband_015.7z :good: