Related
ok it doenst happen when i lay the phone down on the surface and click on the screen it works perfectly
however when i hold it with my right hand and touch the middle of the screen with my thumb
it opens up phone dialer, or appdrawer or vibrante cause it clicks the capacitive button.
when i hold it with my left hand it gets a little bit better but it still does.
if i hold the nexus carefully and touch the screen , it works, when i hold it like this
the things gets better when i put a thick case like otterbox..
is this a hardware issue? ( found similar video on youtube)
my phone is rooted but can i still get a replacement phone?( already put everything back to stock)
and if i do get a replacement, are they going to charge me with anything?
my current nexus one trackball doenst scroll up but everything else works.
How many of you guys got a replacement even though your phone was rooted?
Make sure part of your hand doesn't touch the screen.
Sent from my Google Phone
it's a hardware issue...
all you can do is not grip the phone too closely to the edge of the screen. It registers touches even if you are not touching the screen completely. But that to be a problem you have to have giant hands
I've had this happen to me once since I had it from launch day. It did happen with my Otterbox commuter series, and a clarivue screen protector. But I turned it off and on again and it was fine.
anyway as stevio jobsio whould say, you're holding it wrong
ChongoDroid said:
Make sure part of your hand doesn't touch the screen.
Sent from my Google Phone
Click to expand...
Click to collapse
ok so it is a hardware issue?
no i am not touching any part of the screen. i made sure i wasnt touching the screen.
but it does happen when i hold my phone closely to the edges.
i never had this kind of issues with other touch screen phones..
Well I dunno... One finger at a time and your good to go unless you got fat hands lol
Sent from my Google Phone
I can confirm that my device too does this. When lying in bed I browse the net with one hand and try and scroll....the edges of the touchscreen seem to register depression when the chassis is pushed or gripped too hard also.
It's a minor irritation to me, but I agree it is a hardware issue.
Screen looks great. But I'm having two issues.
First, the screen feels kinda rough dragging my finger across. By comparison my Galaxy S phone and iPad are very smooth and glide with no resistance.
Is this normal, can it be improved?
Second, the screen seems unresponsive at times. I'll have to tap more than one to get it to recognize an action. Maybe it's just being slow.
Also the calibration seems to be a bit off. I often seem to be clicking items below what I tapped on. Not sure it's completely user error since I don't seem to be having this much trouble with my 4 inch Android phone.
PS. The phone is rooted with AutoNooter and using LauncherPro and Dolphin browser.
Ravynmagi said:
Screen looks great. But I'm having two issues.
First, the screen feels kinda rough dragging my finger across. By comparison my Galaxy S phone and iPad are very smooth and glide with no resistance.
Is this normal, can it be improved?
Second, the screen seems unresponsive at times. I'll have to tap more than one to get it to recognize an action. Maybe it's just being slow.
Also the calibration seems to be a bit off. I often seem to be clicking items below what I tapped on. Not sure it's completely user error since I don't seem to be having this much trouble with my 4 inch Android phone.
PS. The phone is rooted with AutoNooter and using LauncherPro and Dolphin browser.
Click to expand...
Click to collapse
My screen is very smooth, and a little bit tacky... I'd prefer a less tacky, smoother feel, but it's okay.
Unresponsive I've not noticed really, but the calibration on the edges and/or corners is funky.. Like hitting the Search button in the market is hit and miss, otherwise other places I personally haven't seen any issues.
There's a thread on here / directions on nookdevs for how to recalibrate the screen. A lot of people have been reporting issues with the calibration on the edge of the screen. It doesn't bother me too much, so I haven't tried, but results are apparently quite good.
http://www.nookdevs.com/Recalibrate_the_NookColor_touch_screen
I've recalibrated the screen a few times. Even did the suggestion with placing the Nook face down for extreme sensitivity.
I still seem to be having the same problem where the touch is very unresponsive. It's most noticable browsing the web, I'll have to tap links multiple times before the browser does anything.
I'm wondering if I have a bad Nook or is this just how it is?
It could be the default browser. I had problems with unresponsive tapping as well but after switching to Dolphin Browser HD I havent really noticed them at all. However, it does seems like only certain apps or portions of them have problems with touch response...I can think of 2 off the top of my head..
1) The search icon in the Android Market. I have to really tap it hard or multiple times for it to open the search ability. Everything else in the market is a light, smooth, responsive tap, except the search ability.
2) ADW's settings menu, specifically the back button. Have to really hit it hard to work yet everything else works perfectly fine.
Maybe it's just me but I swear its only certain things which respond poorly to taps.
In regards to the screen being tacky, goto B&N and buy the Anti-Glare protective screen film. Make sure its the anti-glare one and not the regular screen protector. Not only will your fingers slide perfectly, but it also avoids all the annoying fingerprints the default glass seems to collect. Worth every penny. (You get 2 of them for 15 bucks)
I find that I have better luck ith a light touch & avoid a "tap". It took a bit of practice to know what part of my finger was actually making contact with the screen first & the reason for the perception that the screen was out of calibration.
I do have a problem with the center right area of the screen when playing crossword. Sometimes it is very hard to click on the rufgt side boxes. Interestingly, the same area of the screen is responsive in other apps.
Cheers,
kev
heers,
kev
I purchased the matte screen protector from them and it alleviated the tacky feel of the screen. Also resist oils and smudges so its a must have in my opinion.
Ravynmagi said:
I've recalibrated the screen a few times. Even did the suggestion with placing the Nook face down for extreme sensitivity.
I still seem to be having the same problem where the touch is very unresponsive. It's most noticable browsing the web, I'll have to tap links multiple times before the browser does anything.
I'm wondering if I have a bad Nook or is this just how it is?
Click to expand...
Click to collapse
I have the same problem at the very top edges of the screen. Pressing search in marketplace or a new tab in dolphin is really annoying. Requires many taps to work. Rest of screen seems to work fine. I did notice that the 2.2 Froyo was way worse for screen sensitivity. Maybe they can fix somehow with a firmware patch or something.
I have the same problem. Will try recalibrating later.
Tapiozona said:
It could be the default browser. I had problems with unresponsive tapping as well but after switching to Dolphin Browser HD I havent really noticed them at all. However, it does seems like only certain apps or portions of them have problems with touch response...I can think of 2 off the top of my head..
1) The search icon in the Android Market. I have to really tap it hard or multiple times for it to open the search ability. Everything else in the market is a light, smooth, responsive tap, except the search ability.
2) ADW's settings menu, specifically the back button. Have to really hit it hard to work yet everything else works perfectly fine.
Maybe it's just me but I swear its only certain things which respond poorly to taps.
In regards to the screen being tacky, goto B&N and buy the Anti-Glare protective screen film. Make sure its the anti-glare one and not the regular screen protector. Not only will your fingers slide perfectly, but it also avoids all the annoying fingerprints the default glass seems to collect. Worth every penny. (You get 2 of them for 15 bucks)
Click to expand...
Click to collapse
I don't think the market search button issue is a screen calibration issue. I initially thought there was an issue with the sensitivity/calibration in the top corner of the screen, but I have the same problem with market search when I am in portrait or landscape. Touching items in the same area of the screen in other apps is fine.
My screen is definitely more responsive after doing the commands.
I made sure to clean it completely with a microfiber cloth before running the commands.
As for the market search issue, it seems to have improved the sensitivity. In fact, to me it now feels as if I am getting the button push through, but it just takes time for the app to register it and take action (lag) and thus we think the button push did not go through and push it again...
my 2ยข
A lot of the discussion on this thread is for locale based calibration, but I had the issue where if you hold still on a drag and drop, before dropping the thing you are holding is jittery, as thugh your finger was being jittery. This calibration fixed that problem.
Under the thought that this might happen again, would be nice if there was a way to run the command locally on the system without having to connect to adb to recalibrate.
Any ideas on how that could be done? I was thinking maybe scripted terminal commands?
My S Pen doesn't seem very accurate. When I touch the screen with it, it is off by a couple of millimeters. This is very annoying when drawing.
Is there a way to calibrate the screen/pen or something?
ltrulsse said:
My S Pen doesn't seem very accurate. When I touch the screen with it, it is off by a couple of millimeters. This is very annoying when drawing.
Is there a way to calibrate the screen/pen or something?
Click to expand...
Click to collapse
Well, that "problem" it isn't that. They need to do that because they want you to see the line that are you drawing.
If you enter in to the options of the drawing pen and change to left handed, you will see how that millimeters move to the other side of the pen. So, 1 2 up and 1 or 2mm left/right are necessary and it is how the wacom screens works. In other side I have tried a lot of wacom devices and this is one of the most accurate.
The only problem that I see it is the pen that if you don't give enough pressure it doesn't works, and if you give much, then it will writes in "bold" rather than skinny lines.
Try to move the pen without pressing it, only light slide and see how it doesn't do anything.
Other funny thing on the wacom devices is that the accuracy is not the same in the center of the screen and in the side of it. Problems of magnetism
Did you try pen pressure with autodesk sketchbook, is it working ?
Hi
Just a quick question for you who have the phone and use the pen. When you use your pen for drawing, what happens when your hand (which you hold the pen with) touches the screen? It must be annoying always to write without touching the screen with the hand/fingers like you would do if you were to write with an ordinary pen on a classic paper.
drelle said:
Hi
Just a quick question for you who have the phone and use the pen. When you use your pen for drawing, what happens when your hand (which you hold the pen with) touches the screen? It must be annoying always to write without touching the screen with the hand/fingers like you would do if you were to write with an ordinary pen on a classic paper.
Click to expand...
Click to collapse
The good thing is that u can touch the screen with finger when u write, unlike pure capacitive screen
If u touch the note with finger u will get a mark, ie u can use ur finger to write on the note
If u touch the area of screen above the note, the note app disappears to show the app beneath it and when u remove the finger the note comes back. This is to jot down things from the app beneath it. Hope this makes sense.
ltrulsse said:
My S Pen doesn't seem very accurate. When I touch the screen with it, it is off by a couple of millimeters. This is very annoying when drawing.
Is there a way to calibrate the screen/pen or something?
Click to expand...
Click to collapse
I'm curious, are you left handed?
There is a setting: settings -> pen settings -> dominant hand.
I changed mine to left handed (which I am), and when my right handed friend used it, he complained that it was off by a millimeter or too to the right.
- Frank
drelle said:
Hi
Just a quick question for you who have the phone and use the pen. When you use your pen for drawing, what happens when your hand (which you hold the pen with) touches the screen? It must be annoying always to write without touching the screen with the hand/fingers like you would do if you were to write with an ordinary pen on a classic paper.
Click to expand...
Click to collapse
Thats not an issue as when the pen is touching (so it's active), the screen will no longer accept any additional touches. So with your fingers, multi touch will be active for upto 10 (I believe) seperate touches at once, but as soon as the pen is touching the screen, it will only pick up the pen and no additional touches from your fingers etc so you can rest your fingers on the screen while you are writing.
Thanks for the explanation that makes sense nevertheless the offset is annoying and difficult to get used to.
Try this. It works for me.
http://jjpda.blogspot.com/2012/01/how-to-calibrate-galaxy-note-s-pen.html
try turn on the auto rotation
Or turn off auto rotation
Just try...
Actually all this is nonsense.
The offset is variable and depends on the angle of the pen.
The most simple way to test this and to get used to it, is to open
a S-memo. Then instead of using the line option you choose the
eraser option. Touch the screen and on the screen you see a circle.
Now with the pen on the screen change the angle of the pen and you will see
the tip of the pen 'move' inside the circle. Now get used to the angle of the pen
where the tip is in the center of the circle. Once you are used to this angle your pen will be dead on when drawing.
Remember way back when you learned how to write, it took you days to get used to holding a pen or pencil the right way.
I can recommend the official samsung s-pen holder for a much nicer feeling when using the pen.
Hope this helps
Keethos said:
Thats not an issue as when the pen is touching (so it's active), the screen will no longer accept any additional touches. So with your fingers, multi touch will be active for upto 10 (I believe) seperate touches at once, but as soon as the pen is touching the screen, it will only pick up the pen and no additional touches from your fingers etc so you can rest your fingers on the screen while you are writing.
Click to expand...
Click to collapse
I just want to clarify thhis, the pen needs to be touching and in writing pressure on the screen for it to stop accepting input from your skin.
friedje said:
Actually all this is nonsense.
The offset is variable and depends on the angle of the pen.
The most simple way to test this and to get used to it, is to open
a S-memo. Then instead of using the line option you choose the
eraser option. Touch the screen and on the screen you see a circle.
Now with the pen on the screen change the angle of the pen and you will see
the tip of the pen 'move' inside the circle. Now get used to the angle of the pen
where the tip is in the center of the circle. Once you are used to this angle your pen will be dead on when drawing.
Remember way back when you learned how to write, it took you days to get used to holding a pen or pencil the right way.
I can recommend the official samsung s-pen holder for a much nicer feeling when using the pen.
Hope this helps
Click to expand...
Click to collapse
Go to photo editor choose a bright picture choose the pen option from photo editor hold the phone on portrait mode and try to draw on the edge with a smaller tip on the pen then go switch dominated hand on spen and try again and then come back and say this isn't a devs calibration problem or coding or call it how you want. But give attention to
PHOTO EDITOR
PEN OPTION
PORTRAIT MODE
RIGHT HAND DOMINATED > RIGHT SIDE
LEFT HAND DOMINATED > LEFT SIDE
Sent from my GT-N7000 using XDA App
This idea that we need to see where we are writing is just as imbecilic as Motorola's idea of protecting users from rain drops. Back then, it stoped you from playing any games that required you to keep your finger stationary for more than 15 seconds. Here, it makes drawing and writing very difficult.
I don't ****ing see where I'm writing when I'm using a paper, why would I need that on my phone's screen?
I have also problems using my spen. Is it realy normal to put quite much pressure on the pen to write sth.? It's realy hart to dram thin lines without any interruption of the line..... feels as if that'S not "normal"
how about yours? Is that normal?
I don't know if this will help, but my s-pen was off a few millimeters too after an official update. I tried calibrating the accelerometer and gyro and the s-pen became accurate again. I'm not sure though if this indeed did the trick or if my mind was just playing tricks on me.
Thanks, I'll try that, too. But my Problem primarily is not the millimetres off, it's the pressure needed to draw sth.
I also wrote Samsung's support yesterday. I'll see what they say.
I won't flash my phone before I can be sure that it's okay and I don't have to return it.....
Matrox182 said:
Thanks, I'll try that, too. But my Problem primarily is not the millimetres off, it's the pressure needed to draw sth.
I also wrote Samsung's support yesterday. I'll see what they say.
I won't flash my phone before I can be sure that it's okay and I don't have to return it.....
Click to expand...
Click to collapse
iam having the exact same problem..please tell me if you find a solution.
it didnt happen with the pen which came with phone..it had the millimeters away problem..and when i lost i ordered new pen this new pen has more pressure problem..its very hard to draw thin lines
friedje said:
Actually all this is nonsense.
The offset is variable and depends on the angle of the pen.
The most simple way to test this and to get used to it, is to open
a S-memo. Then instead of using the line option you choose the
eraser option. Touch the screen and on the screen you see a circle.
Now with the pen on the screen change the angle of the pen and you will see
the tip of the pen 'move' inside the circle. Now get used to the angle of the pen
where the tip is in the center of the circle. Once you are used to this angle your pen will be dead on when drawing.
Remember way back when you learned how to write, it took you days to get used to holding a pen or pencil the right way.
I can recommend the official samsung s-pen holder for a much nicer feeling when using the pen.
Hope this helps
Click to expand...
Click to collapse
This is absolutely correct... the stylus orientation definitely does affect the point offset.
The problem is (at least on mine) is that the "left-handed" setting appears to do nothing. The point offset is the same regardless of the setting (it's biased for right handed), so trying to write left handed is very hard.
How many people that are having the problem are 'lefties'? If I pretend to be right handed, the offset is perfect (regardless of the left or right setting). This has to be a bug and I'll presume it'll get fixed soon. Because it's really quite intolerable as a leftie.
Today I upgraded my phone to Criskos rom with Abyss kernel and all accuracy problems are gone for me.Never had problem with pressure.
Sent from my GT-N7000 using Tapatalk
Hi guys
I just got an second-hand note and i'm wondering, is my s-pen broken?
I know that it registers multiple levels of pressure, but i can't seem to figure it out.
I know the note app makes a thicker line when u press harder, but i can't seem to get it to work.
Also, i cant "feel" the tip going "up" a little bit. I can imagine for diferent levels of pressure the tip moves a bit up and down, but i cant feel it. It feels like it is stuck.
Is it broken or is it supposed to do this?
I mis-click sometimes (i clearly touch the screen but it doesn't register) and the "sync" is way of, like 2 mm to to the top and left.
Any ideas?
Thanx!
Check with another pen.
Sent from my GT-N7000 using xda premium
my spen is fine and i dont find the tip moving at all. it works just fine.. on the snote app try with a brush instead of pen.. that should a better picture of pressure sensitivity
Hmm i tried it but it goes from thick to not registering the stylus (as it is clearly on the screen)
Do u guys get feedback when u let ur pen "fall" on the screen? with this i mean it is bouncing on the screen, with only its own weigt. I can go as high as i want but when it touches my screen i wont get feedback. I need to press it myself, on top of the weight of the pen.
Also the position is off. Any way to calibrate this? Or is it my pen? And if it is the software, wil flashing a new rom fix it?
i dont know about any feedback..
i have read and seen some apps that can calibrate the spen by just changing the spen settings dominant hand to left then to right,
In papyrus the line should get thinner when less pressure is given.
so i finaly figured it out. in papyrus, it is clearly noticable that when i press harder i get a thicker line.
What i do notice about the allignment is that when it is on righthand mode the cursor is off somewhat to the up-left side, and on lefthand mode it is to the up-right side. I found that this is because it thinks i want to hold the pen with an angle. If i do that (as i just found out) it alligns just fine. But i want to be able to use it 90 degrees from my screen, straight. Is there any way i can fix this? Because i think the screen is reporting the right position only the left- or righthand mode is correcting it.
i think its made to use it in an angle.. that why the hovering icon aligns just right at a slant
My stylus is registering the pressure input plus it wont go thicker than the ppont u selected. The thickness is only apparent when u use a thick bruah. So check it again.
Sent from my GT-N7000 using xda app-developers app
Fixed
Got a new s-pen, "problems" still exists, so i think its just how s-pen works, not exactly as i want it but will do fine.
Thanx everyone
So i started to try and use air gesture and immediately was frustrated with it. The instructions seemed fairly easy but also aren't crazy clear.
First it might just be me but I had to hold my hand further away from the screen than I thought. You'll hold your hand out a few inches above the camera and it will come up with the little blue/green status bar. I didn't see anything really mention this bar and was confuse by it. All it really means though is that the camera is on and watching. Secondly, you'll raise your hand about another 3 inches away and make a "loose" claw. I saw this because I was doing a really like pinched/clutched claw hand and it would NOT recognize it. Sort of pretend like you're grabbing a crystal ball rather than a gumball (sorry if this is a really odd example).
After this you should see the helper come up and show your hand. My biggest problems were distance and hand form.
Also, for hand id, you have to turn on "cover to wake for hand id" to get the screen to wake up with it. This isn't on by default. You essentially do the same things as air gesture, just holding your hand a few inches off the screen.
In the end I can't see hand ID as extremely useful myself, but the air gesture could be great in the right situation.
Good write up, spot on.
Found this video from LG that shows exactly what you described, so if you need a visual aid to go along, here it is.
https://www.youtube.com/watch?v=GiAgEsH2p10
I find being able to just place my hand over the phone to wake and unlock rather my favorite use of this. Knocking the screen twice is ok for wakeup but it describes as being able to turn it off..doesn't ever seem to work. Opening up the music app and controlling it without touching the phone whilst driving (and the phone is in my hands free cradle) has been pretty useful once I memorized the distance and gesture so I don't have to look at the phone at all. If LG expands this functionality ever it could be quite useful..allow you to let the camera film custom gestures and connect that gesture to whatever function you like, and such.
phillymade said:
Good write up, spot on.
Found this video from LG that shows exactly what you described, so if you need a visual aid to go along, here it is.
https://www.youtube.com/watch?v=GiAgEsH2p10
Click to expand...
Click to collapse
Thanks for posting the video, I finally did it! I'm fairly impressed, but find it to still be pretty uncooperative. Of course, I could spend a lot of time perfecting my technique, but I think it really needs more development. It's just waaaaay too fickle, especially if you have to pull your hand away for a split second.